SEARCH · Search NASA

Results for “Analytic derivatives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1983

The effect of a non-Maxwellian electron distribution on oxygen and iron ionization balances in the solar corona

Analytic expressions are derived for ionization and recombination rates in a parameterized non-Maxwellian electron velocity distribution with an enhanced high-energy tail. These expressions are then used in investigating the effect of such an enhancement in the high-energy tail of the coronal electron velocity distribution on the oxygen and iron ionization balances, O(+6) - O(+7) and Fe(+11) - Fe(+12). Relative to a Maxwellian of the same mean electron energy, the degree of ionization allowed by such a distribution is found to be either unchanged or slightly decreased for iron but often substantially increased for oxygen. The greater sensitivity of oxygen ionization balance to the high-energy distribution tail derives from the higher oxygen ionization threshold energy. It is noted that the electron temperature inferred from a measurement of the oxygen ionization ratio, O(+6)/O(+7), could indeed overestimate the actual coronal electron temperature by nearly 10 to the 6th K if the coronal electron distribution is incorrectly assumed to be Maxwellian.

Owocki, S. P.↗

NASA NTRS1983

Energetics and the resistive tearing mode - Effects of Joule heating and radiation

The contribution of energy flux to the dynamics of magnetic field reconnection is analytically studied in order to determine the influence of Joule heating and radiation on the linear development of the tearing instability in slab geometry. A temperature-dependent Coulomb-like resistivity is used to provide the coupling between the dynamics and the energy equation. Analytical expressions are derived for the growth rates utilizing constant-psi and long-wavelength approximations. The solutions indicate the occurrence of several modes in addition to the usual tearing mode, several of which have relatively slow, complex growth rates. At large values of the magnetic Reynolds number, there are at least two modes with purely exponential growth when the radiative loss decreases with increasing temperature. If the radiation is neglected, the Joule heating alone also results in two modes with real, positive growth at large S. Below a particular value of S, all the modes are generally stabilized.

Steinolfson, R. S.↗

NASA NTRS1983

Linear and Nonlinear Aspects of Rotordynamics

Excessive vibrations of the liquid oxygen pump in the Space Shuttle's Main Engine have been recorded during hot firing ground testing. In order to determine mathematical explanations of this possibility, destructive phenomenon differential equations have been examined which describe the rotordynamics of the pump. Modeling the rotor as a random eigenvalue problem was considered. Analytical expressions were derived for the solution in the case of symmetric damping and stiffness. This enables one to determine accuracy estimates when testing numerical techniques to solve both asymmetric and nonlinear problems. Finally, the rotor model has had nonlinear elements incorporated to improve its simulation of the pump and to expand the corresponding mathematical theory.

Day, W. B.↗

NASA NTRS1984

Static and dynamic structural-sensitivity derivative calculations in the finite-element-based Engineering Analysis Language (EAL) system

The implementation of static and dynamic structural-sensitivity derivative calculations in a general purpose, finite-element computer program denoted the Engineering Analysis Language (EAL) System is described. Derivatives are calculated with respect to structural parameters, specifically, member sectional properties including thicknesses, cross-sectional areas, and moments of inertia. Derivatives are obtained for displacements, stresses, vibration frequencies and mode shapes, and buckling loads and mode shapes. Three methods for calculating derivatives are implemented (analytical, semianalytical, and finite differences), and comparisons of computer time and accuracy are made. Results are presented for four examples: a swept wing, a box beam, a stiffened cylinder with a cutout, and a space radiometer-antenna truss.

Camarda, C. J.↗

NASA NTRS1984

A variational formulation for time-dependent climate models

A variational principle for time dependent diffusion problems is presented and is demonstrated by applying it to simple seasonal climate models. Two cases are treated. The first, a North-Coakley-type model with constant properties, is used as a tutorial example for the application of the technique. For the second case, heat capacity and thermal conductivity are considered to be latitude dependent in order to treat the effects of land/ocean distribution on the seasonal temperature distribution over the earth. The variational equations are derived and approximate analytical solutions are developed which delineate the influences of the physical asymmetries of the hemispheres in producing an asymmetric annual cycle.

Smith, G. L.↗

NASA NTRS1983

Optimum placement of controls for static deformations of space structures

The placement of thermal or force actuators to control slowly varying disturbances in the shape of large space structures is investigated analytically. Expressions are derived based on disturbances defined as the worst linear combination of a given set of functions and minimized numerically using the NEWSUMT optimization package. Results are presented in tables and graphs for a free-free beam with equidistant controls and polynomial-form (order 2-6) disturbances. Control placement is found to be of greater importance for force actuators, but is also of significance for thermal actuators.

Haftka, R. T.↗

NASA NTRS1985

Coupled atmosphere/canopy model for remote sensing of plant reflectance features

Solar radiative transfer through a coupled system of atmosphere and plant canopy is modeled as a multiple-scattering problem through a layered medium of random scatterers. The radiative transfer equation is solved by the discrete-ordinates finite-element method. Analytic expressions are derived that allow the calculation of scattering and absorption cross sections for any plant canopy layer form measurable biophysical parameters such as the leaf area index, leaf angle distribution, and individual leaf reflectance and transmittance data. An expression for a canopy scattering phase function is also given. Computational results are in good agreement with spectral reflectance measurements directly above a soybean canopy, and the concept of greenness- and brightness-transforms of Landsat MSS data is reconfirmed with the computed results. A sensitivity analysis with the coupled atmosphere/canopy model quantifies how satellite-sensed spectral radiances are affected by increased atmospheric aerosols, by varying leaf area index, by anisotropic leaf scattering, and by non-Lambertian soil boundary conditions. Possible extensions to a 2-D model are also discussed.

Gerstl, S. A.↗

NASA NTRS1986

Aeorodynamic characteristics of an air-exchanger system for the 40- by 80-foot wind tunnel at Ames Research Center

A 1/50-scale model of the 40- by 80-Foot Wind Tunnel at Ames Research Center was used to study various air-exchange configurations. System components were tested throughout a range of parameters, and approximate analytical relationships were derived to explain the observed characteristics. It is found that the efficiency of the air exchanger could be increased (1) by adding a shaped wall to smoothly turn the incoming air downstream, (2) by changing to a contoured door at the inlet to control the flow rate, and (3) by increasing the size of the exhaust opening. The static pressures inside the circuit then remain within the design limits at the higher tunnel speeds if the air-exchange rate is about 5% or more. Since the model is much smaller than the full-scale facility, it is not possible to completely duplicate the tunnel, and it will be necessary to measure such characteristics as flow rate and tunnel pressures during implementation of the remodeled facility. The aerodynamic loads estimated for the inlet door and for nearby walls are also presented.

Rossow, V. J.↗

NASA NTRS1986

Vibration of a large space beam under gravity effect

The structural characteristics of a large simply supported beam subjected to gravity are described. The nonlinear governing equations for both the static and the dynamic response are derived and solved analytically. The results show the feasibility of verifying the on-orbit dynamic characteristics of a large space beam by utilizing ground test data of such a structure. It is noted that the gravity effect interacts mostly with the first vibration mode. It was also found that the system of a large space beam subjected to its own weight is a hardening system. The differential equation for the asymmetric mode is a Duffing type equation. However, the governing equation for the symmetric mode has an additional quadratic term. It is this term that causes the maximum vibration amplitudes at different phases to be non-identical.

Shih, C.-F.↗

NASA NTRS1986

Vibration of a large space beam under gravity effect

Future space structures will have a low mass density and high flexibility, with ground test dynamic behavior differing significantly from that in zero-G orbit. Attention is presently given to the vibration behavior of a beam deformed by its own weight; the results obtained by the differential equations for both the static and dynamic responses of a large, simply supported beam, which are derived and solved analytically, allow ground test experiment measurements to be used for orbital dynamic characteristics verification efforts.

Shih, C.-F.↗

NASA NTRS1986

Criteria of chaos in non-linear mechanics

Analytical criteria are derived for the geometrical interpretation (Zak, 1985) of the transition to chaos in nonlinear mechanical systems. The concept of orbital instability in configuration space is employed in the analysis, and the differences between chaotic instability and classical Liapunov instability are explored. The case of a symmetric rigid body rotating about its center of gravity is considered as an example, and the applicability of the present approach to noninertial motion or to continua is discussed.

Zak, M.↗

NASA NTRS1986

Migration of the separation point on a deforming cylinder

An iterative scheme of solving the Navier-Stokes equations for unsteady two-dimensional flow about a deforming and translating cylinder is given. In the kth iteration, the convected vorticity appears as the source term in an equation of transient diffusion of vorticity. A novel integral transform is used to reduce this transient vorticity equation to a k-dimensional heat equation. The bounded solution of this equation is obtained with a general method of superposition for problems involving a moving boundary. An equation describing the migration of the separation point on a deforming cylinder in unsteady cross flows is derived from the analytically obtained velocity field. The radial expansion of the cylinder surface is shown to hasten the separation time and to increase the separation angle. The results imply that in the steady flow past a body that is moving forward and sinking at constant rates, the locus of points at which the azimuthal component of skin friction changes sign originates on the leeward ray at a point downstream of the front tip.

Lin, S. P.↗

NASA NTRS1987

The quadrupole gravitational lens

An asymmetric lens made of a spherically symmetric galaxy and a quadrupole tidal part allows a very simple pictorial examination of the multiplicity and positions of the images, for any mass density profile. The lens equations can be reduced to one equation in one variable. In the special case of a singular isothermal sphere with a tide (SIST), the lens properties are described by five parameters. Two parameters determine the angular scale and orientation, while three determine the configuration of the images. A comprehensive investigation of the SIST lens is performed, including the variation of the configurations with the parameter values, the critical surfaces in the parameter space, and the extremal solutions. Analytic expressions are derived for the SIST parameters, and additional image positions, in the case when the intensity ratio and positions relative to the galaxy for two of the images are given as input. Quadrupole lenses with a point mass and a pseudoisothermal sphere as the main part are also described in terms of direction diagrams. A direct relation between deflection profile and rotational velocity is derived.

Kovner, Israel↗

NASA NTRS1987

A theory for the Langmuir waves in the electron foreshock

A comprehensive theory for the Langmuir waves in the earth's foreshock involving saturation of the kinetic version of the beam instability by quasi-linear relaxation is proposed in this paper. Reactive and kinetic beam instabilities are shown to be the two limiting versions of a single instability whose analytically and numerically derived descriptions are shown to form a consistent picture. It is pointed out that the reactive instability gives rise only to narrow-band growth while the kinetic instability gives rise to wide-band growth. Arguments for describing the Langmuir wave growth in terms of the kinetic instability are given, and four suppression mechanisms for the kinetic instability are discussed. It is suggested that quasi-linear relaxation limits the Langmuir growth and gives rise to distributions qualitatively similar to the observed distribution functions, and arguments in favor of this hypothesis are presented.

Cairns, Iver H.↗

NASA NTRS1987

Cutoff wavenumbers and modes for annular-cross-section waveguide with eccentric inner conductor of small radius

Analytical expressions are derived for the cutoff wavenumbers and the corresponding modes in annular-cross-section waveguides having inner conductors of small radius. Waveguides with circular and rectangular outer boundary are considered. In the case of the circular eccentric annular waveguide, comparison is made between the values of cutoff wavenumbers computed from the expressions derived in this paper and data obtained by a more rigorous numerical technique.

Davidovitz, Marat↗

NASA NTRS1987

Determination of the scaled optical thickness of clouds from reflected solar radiation measurements

A method for determination of scaled optical thickness from reflected solar radiation measurements is described in which measurements of the reflected function are compared with asymptotic expressions for the reflection function of optically thick layers. Analytic formulas are derived which show the dependence of the reflection and transmission functions of nonabsorbing atmospheres on cloud optical thickness, ground albedo, and the asymmetry factor. An expression is derived which shows that the ground albedo produces a constant bias in the derived optical thickness, regardless of the value of the measured reflection function. Results from an analysis of high-resolution images, obtained in Oklahoma, of the reflection function of clouds shows the impact of details of the single scattering phase function on the derived optical thickness.

King, Michael D.↗

NASA NTRS1988

A physically consistent model for artificial dissipation in transonic potential flow computations

The effect that artificial dissipation has on numerical solutions of the transonic Full Potential Equation (FPE) are investigated by comparing the artificially dissipative FPE to a Physically Dissipative Potential (PDP) equation. Analytic expressions were derived from the variables C and M sub c that are used in the artificial density formulation. It was shown that these new values generate artificial dissipation which is equivalent to the physical dissipation existing in the PDP equation. The new expression for the variables C and M sub c can easily be incorporated into the existing full potential codes which are based either on the artificial density or on the artificial viscosity formulation. A comparison of Physically Dissipative Potential (PDP), Artificial Density or Viscosity (ADV), Artificial Mass Flux (AMF), and ADV with variable C and M sub c formulation (MCC) is also presented.

Dulikravich, George S.↗

NASA NTRS1988

Reasoning about fault diagnosis for the space station common module thermal control system

The proposed common module thermal control system for the Space Station is designed to integrate thermal distribution and thermal control functions in order to transport heat and provide environmental temperature control through the common module. When the thermal system is operating in an off-normal state, due to component faults, an intelligent controller is called upon to diagnose the fault type, identify the fault location and determine the appropriate control action required to isolate the faulty component. A methodology is introduced for fault diagnosis based upon a combination of signal redundancy techniques and fuzzy logic. An expert system utilizes parity space representation and analytic redundancy to derive fault symptoms, the aggregate of which is assessed by a multivalued rule based system. A subscale laboratory model of the thermal control system designed is used as the testbed for the study.

Vachtsevanos, G.↗