Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process Selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Innovative Approach to Recycle Lithium‐Ion Battery Electrolytes via Sequential Chemical Processes

The rapid growth of electric vehicles (EV) has driven the widespread use of lithium-ion batteries (LIBs). This will result in a large amount of spent batteries that if not properly disposed will pose significant environmental damage, especially from the electrolyte. The electrolyte contains lithium hexafluorophosphate (LiPF 6 ), which when treated by either incineration or water washing can generate harmful F- and P-containing substances such as hydrofluoric acid (HF). In this study, an innovative two-step process is presented to separate and purify both the solvents and lithium salts from the spent electrolyte. Antisolvent assisted precipitation is used to selectively isolate LiPF 6 salt in the form of a complex with ethylene carbonate. Subsequent distillation then separates the volatile electrolyte solvents and antisolvent from each other effectively. In addition, a new process to further purify LiPF 6 from its ethylene carbonate (EC) complex is also presented. This electrolyte recycling method not only enables the recovery of the high-value LiPF 6 salt and the electrolyte solvents, but also paves the way for environmentally responsible and circular LIB recycling.

electrolyte↗
DOE OSTI2025

Transformational Nano-confined Ionic Liquid Membrane for Greater than or Equal to 97 Percent Carbon Dioxide Capture from Natural Gas Combined Cycle Flue Gas

A transformational process based on nano-confined ionic liquid (NCIL) membranes was developed for capturing ≥97% CO 2 from natural gas combined cycle (NCCC) flue gas. The NCIL membranes were prepared by loading amino acid ionic liquid into a framework composed of single-walled carbon nanotube mesh filled with graphene oxide quantum dots. The membranes exhibited CO 2 permeance as high as 2,000 GPU with a CO 2 /N2 selectivity of 2,300 for a typical NGCC flue gas composition. When H 2 O vapor sweep was applied in the permeate side, 96.6% CO2 dry-basis purity and 97.6% CO 2 capture rate were achieved for a simulated NGCC flue gas with single stage. In the process design, a highly H 2 O-selective membrane would be needed to recover majority of the H 2 O vapor, and the recovered H 2 O vapor could be recycled to the permeate side of the NCIL membrane. Sulfonated poly(ether ether ketone) membranes were successfully developed for this purpose. These membranes exhibited H 2 O permeance great than 11,000 GPU and H 2 O/CO 2 selectivity greater than 1,000 at 70ºC for a feed mixture consisting of 14.5 vol% H2O and balanced CO 2 . A standalone membrane model using MATLAB platform was developed for process simulation. The model was validated with experimental data. Techno-economic analysis based on the testing data collected during the current program suggests this transformational membrane process can achieve 97% CO 2 capture efficiency with a cost of $47.8/tonne of CO 2 , which is a 21% reduction versus DOE’s reference case B31B.97.

03 NATURAL GAS↗
DOE OSTI2025

Depolymerization as a Design Strategy: Depolymerization Etching of Polymerization-Induced Microphase Separations

Thermally triggered depolymerization has traditionally been viewed through the lens of sustainability and recycling, not as a constructive tool for materials design. Herein, we show that selective, thermally triggered depolymerization to gaseous monomer serves as a solvent-free strategy for generating porosity in nanostructured polymer materials, offering a means to bypass the mass transport limitations inherent in conventional solution-based etching. As a demonstration platform, we employed polymerization-induced microphase separation (PIMS) to generate disordered bicontinuous block copolymer structures with embedded depolymerizable domains. By incorporating a methacrylate block susceptible to thermal depolymerization within a cross-linked, depolymerization-resistant styrenic matrix, we developed a process we term depolymerization etching of polymerization-induced microphase separations (DEPIMS). This approach enables highly selective and efficient domain removal via reversion to monomer to produce mesoporous materials with high surface areas (>200 m 2 /g). Subsequent surface functionalization yielded mesoporous adsorbents with tunable uptake kinetics and among the highest dye adsorption capacities reported for PIMS-derived materials, demonstrating the adaptability of the DEPIMS platform for chemical separations. DEPIMS can also be extended to a gram-scale, one-pot approach to yield mesoporous materials with recoverable monomer in under 12 h. These findings reposition thermal depolymerization from a sustainability tool to a broadly enabling strategy for scalable, on-demand fabrication of functional nanostructured materials.

Depolymerization↗
DOE OSTI2024

Simulation of Particulate Transport for Delivery of Solid Amendments into the Subsurface: FY24 Status Report

For particulate-based amendments to be viable for field-scale remediation at the Hanford Site (e.g., 200 DV-1 Operable Unit), particles need to be delivered a sufficient radial distance from an injection well and retained at concentrations high enough for effective treatment. An accurate description of the particle radius of influence (ROI) is critical for developing an overall remediation strategy. However, field-scale particle simulations are currently limited due to insufficient simulation capabilities and a lack of experimental data to validate and parameterize particle transport models. To help build toward field-scale deployment, this fiscal year (FY) we have (1) developed a pre screening tool to estimate particle transport, (2) implemented particle transport models within PFLOTRAN, and (3) conducted preliminary estimations of particle ROI. While field-scale numerical simulations will ultimately be necessary before remedy design and field implementation, we have developed a pre-screening tool that offers valuable estimations of expected particle injectability and ROI in a 1-D system. The advantage of the tool is that it does not require extensive laboratory experiments and instead makes predictions based solely on routine laboratory measurements. This tool can assist in down-selection and decision-making by identifying which particle amendment systems are worth pursuing in future laboratory experiments, such as 1-D column tests and beyond. With any system, scaling up from the lab to the field presents challenges. Currently, there is no field data available for model calibration or validation. However, the theoretical particle models being developed herein are the best tools available to guide progress toward field deployment. To help bridge this gap and verify model predictions, larger-scale lab experiments are being proposed. To advance simulation capabilities, six particle transport models are being integrated into the reactive transport simulator PFLOTRAN. These include colloid filtration theory (CFT) and five additional particle transport models (M1-M5). Each model, from M1 to M5, progressively incorporates additional particle transport and retention processes. Ultimately, the simplest model capable of accurately describing 1-D column data will be selected and parameterized. During FY24, the CFT and M1 model have been fully implemented within PFLOTRAN. Using an existing 1 D column experiment, the two currently implemented particle transport models (CFT and M1), and associated parameters, were fit to this experiment. While simpler model formulations are helpful for estimations, these formulations could not fully describe particle transport and retention behavior in the previous 1-D column experiment. Thus, additional complexities will need to be considered, which will be accounted for in the M2-M5 model formulations. Additionally, because a viscous, shear thinning fluid was required to keep particles in suspension, considerations for flow will also need to also be accounted for. Therefore, a new immiscible two-phase flow mode is currently being implemented in PFLOTRAN. With some modifications, this new flow module could also support simulation of non-Newtonian liquid amendments, foams, and emulsions. We also estimated the expected ROI of solid amendments using 1-D simulations. The average predicted ROI was approximately 15 ft for micron-sized zero valent iron (mZVI) suspended in xanthan gum (XG). Using the pre screening tool and ROI estimates, additional amendment-delivery laboratory characterization and experiments are proposed. The results from additional experiments can be used to validate and parametrize particulate transport model formulations, which will ultimately provide predictive capabilities for field amendment-delivery systems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Genesis of a novel high-rate composite manufacturing process using large-scale additive manufacturing – compression molding (AM-CM) system: Possibilities and limitations

Oak Ridge National Laboratory (ORNL) has developed a highly automated manufacturing process for thermoplastic composites that combines the benefits of Additive Manufacturing and Compression Molding (AM-CM) to produce high-performance functional composite structures at automotive production rates. Here, the AM-CM process creates highly precise preforms by additively placing extruded fiber-filled polymers (with controlled fiber orientations and multi-material configurations) in the desired mold location before undergoing a secondary compression molding process immediately before the preform cools down. Preforms can be in the form of short, long-chopped, or continuous fiber-filled thermoplastic polymers (e.g., CF/GF-filled ABS, PC, LM-PAEK, etc.). The AM-CM process combines the benefits of controlled fiber alignment, that is only achievable in AM-printed parts with the classical CM process, which eliminates porosity and good surface finish. A preform created using AM-CM can integrate various materials to enable additional architectural functionalities, including over-molding, selective stiffening, and the incorporation of electrically or thermally conductive channels. All these advantages come with a fast part production cycle time. The AM-CM process can manufacture multi-material, multi-functional parts in under 3 min, starting from raw material (pellets) to the final product. The novel AM-CM process offers superior microstructural control and enhanced multi-functionality previously unattainable with any other traditional high-rate thermoplastic composite manufacturing method. This work covers the manufacturing concept, system development, materials and applications of AM-CM process in detail.

Kumar, Vipin [Oak Ridge National Laboratory (ORNL)↗
DOE OSTI2025

Abstract for CRADA between NETL and GlycoSurf, Inc.

The National Energy Technology Laboratory (NETL) and GlycoSurf, Inc. (Participant) will collaborate in the development of novel luminescent sensing materials for rare earth elements using chemically modified surfactants. Rare earth elements are economically critical metals that are used in many technologies relevant to both energy and national defense. Slow and expensive characterization methods for rare earth element analysis are a major pain point for domestic production of these metals; the development of low-cost optical sensing materials and platforms can significantly reduce the time and financial costs associated with rare earth element prospecting and process monitoring. NETL has extensive experience developing inexpensive and compact optical sensors for critical metals such as rare earths. GlycoSurf, Inc. has commercialized high performance surfactants for the selective extraction of rare earth elements in complex environments such as acid mine drainage. By modifying these surfactants with fluorescent functional groups, trace concentrations of rare earths may be detected through a process called “photosensitization,” where the sensing material induces element-specific emission bands that enable different rare earth elements to be detected and distinguished. This project will enable the development of sensing materials capable of selectively detecting trace quantities of valuable rare earths in challenging conditions, including high ionic strength, highly acidic matrices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Room-temperature valley-selective emission in Si-MoSe 2 heterostructures enabled by high-quality-factor chiroptical cavities

Transition metal dichalcogenides possess valley pseudospin, enabling coupling between photon spin and electron spin for classical and quantum information processing. However, rapid valley-dephasing processes have impeded the development of scalable, high-performance valleytronic devices operating at room temperature. Here we demonstrate that a chiral resonant metasurface can enable room-temperature valley-selective emission in MoSe 2 monolayers independent of excitation polarization. This platform provides circular eigen-polarization states with a high quality factor (Q-factor) and strong chiral near-field enhancement. The fabricated Si chiral metasurfaces exhibit chiroptical resonances with Q-factors up to 450 at visible wavelengths. We reveal degrees of circular polarization (DOP) reaching a record high of 0.5 at room temperature. Our measurements show that the high DOP can be attributed to the significantly increased chiroptical local density of states, which enhances valley-specific radiative transition rates by a factor of ~13. Our work could facilitate the development of ultracompact chiral classical and quantum light sources.

42 ENGINEERING↗
DOE OSTI2026

Mode Multiplexing for Scalable Cavity-Enhanced Operations in Neutral-Atom Arrays

Neutral-atom arrays provide a versatile platform for quantum information processing. However, in large-scale arrays, efficient photon collection remains a bottleneck for key tasks such as fast, nondestructive qubit readout and remote entanglement distribution. We propose a cavity-based approach that enables fast, parallel operations over many atoms using multiple modes of a single optical cavity. By selectively shifting the relevant atomic transitions, each atom can be coupled to a distinct cavity mode, allowing independent simultaneous processing. We present practical system designs that support cavity-mode multiplexing with up to 50 modes, enabling rapid mid-circuit syndrome extraction and significantly enhancing entanglement distribution rates between remote atom arrays. This approach offers a scalable solution to core challenges in neutral-atom arrays, advancing the development of practical quantum technologies.

Aqua, Ziv [Massachusetts Institute of Technology (↗
DOE OSTI2026

Evaluation of the Room Temperature Field Quality Measurements of HL-LHC MQXFA Magnet Assemblies

As a member of the multi-lab U.S. High Luminosity LHC Accelerator Upgrade Project (HL-LHC AUP), Lawrence Berkeley National Laboratory (LBNL) is assembling high-field Nb3Sn low-beta MQXFA quadrupole magnets for eventual installation at CERN as part of the HL-LHC upgrade. Each magnet undergoes room temperature magnetic measurements at two points during the assembly process: once after completion of the coil pack sub-assembly and once after the magnet is fully assembled and pre-loaded. Beyond its use to verify that each magnet assembly can meet operational requirements, the data from this two-stage measurement process allow for investigation into the impact of the pre-loading operation on field quality. Recent measurements on magnet rebuilds as well as exploratory coil pack reconfigurations also provide an opportunity to see in isolation the effects of changes to a magnet’s coil selection or coil layout. In this work, we present the magnetic measurement results of MQXFA magnets assembled or currently in process, focusing particularly on magnets with data corresponding to multiple builds, and discuss trends and insights which may be beneficial for the remaining MQXFA magnet production or for future Nb3Sn accelerator magnets.

Doyle, Jennifer [LBNL, Berkeley] (ORCID:0009000079↗
DOE OSTI2025

Exploring the Nucleon Structure via Deep Electroproduction Processes

Understanding the internal structure of the nucleon is a fundamental goal of modern physics, which aims at a comprehensive framework describing the internal dynamics of quarks and gluons. Among other structure functions, Generalized Parton Distributions (GPDs) offer a powerful framework for describing the nucleon dynamics by correlating the longitudinal momentum and the transverse position of its internal partons. Such a correlation provides a three-dimensional picture of the nucleon and enables access to fundamental properties, including the internal pressure distributions and the parton’s angular momentum contribution to the nucleon's total spin, thereby playing a central role in resolving the nucleon spin puzzle. At the Thomas Jefferson National Facility (JLab), polarized electron beam experiments allow for probing GPDs through the measurement of hard exclusive processes. Among the cleanest experimental channels, we find the electro-production of a real photon through the Deeply Virtual Compton Scattering (DVCS) mechanism. The first data-taking period of the CLAS12 program, taking place in 2018, allowed for unique DVCS Beam Spin Asymmetry (BSA) measurements in the phase space covered by a 10.6 GeV polarized electron beam impinging on an unpolarized liquid hydrogen target. Although detecting all final-state particles ensures exclusivity of the process, conservation laws indicate that it is not mandatory. I adopt an approach omitting the direct detection of the recoil proton, providing a simplified yet effective event selection strategy that boosts statistics and gives access to a larger phase space sensitive to the underlying GPD dynamics through BSA and cross section measurements. The Double DVCS (DDVCS) process promises a dedicated mapping of GPDs. Contributing to the electro-production of a lepton pair cross-section, the DDVCS reaction extends DVCS by allowing the final-state photon to be virtual, enriching the kinematic phase space and providing unique access to the internal correlations encoded by GPDs. A feasibility study is conducted to assess the potential of future DDVCS measurements at Jefferson Lab and the future Electron-Ion Collider (EIC). While Jefferson Lab will provide DDVCS measurements in the valence region through the SoLID$\mu$ and $\mu$CLAS12 experimental projects, in the long term, the EIC will provide complementary measurements in the sea region, both accessing unprecedented information about GPDs in a phase space region otherwise inaccessible. Taken together, these investigations demonstrate both the current capabilities and future opportunities for probing GPDs through exclusive processes. The experimental analysis of DVCS at CLAS12 provides precise measurements within an established framework, while the phenomenological study of DDVCS opens the door to richer and more comprehensive explorations with future detectors and facilities.

Alvarado, Juan [Université Paris-Saclay: Gif-sur-Y↗
DOE OSTI2024

Genetic variation in Zea mays influences microbial nitrification and denitrification in conventional agroecosystems

Nitrogenous fertilizers provide a short-lived benefit to crops in agroecosystems, but stimulate nitrification and denitrification, processes that result in nitrate pollution, N 2 O production, and reduced soil fertility. Recent advances in plant microbiome science suggest that genetic variation in plants can modulate the composition and activity of rhizosphere N-cycling microorganisms. Here we attempted to determine whether genetic variation exists in Zea mays for the ability to influence the rhizosphere nitrifier and denitrifier microbiome under “real-world” conventional agricultural conditions. To capture an extensive amount of genetic diversity within maize we grew and sampled the rhizosphere microbiome of a diversity panel of germplasm that included ex-PVP inbreds (Z. mays ssp. mays), ex-PVP hybrids (Z. mays ssp. mays), and teosinte (Z. mays ssp. mexicana and Z. mays ssp. parviglumis). From these samples, we characterized the microbiome, a suite of microbial genes involved in nitrification and denitrification and carried out N-cycling potential assays. Here we are showing that populations/genotypes of a single species can vary in their ecological interaction with denitrifers and nitrifers. Some hybrid and teosinte genotypes supported microbial communities with lower potential nitrification and potential denitrification activity in the rhizosphere, while inbred genotypes stimulated/did not inhibit these N-cycling activities. These potential differences translated to functional differences in N 2 O fluxes, with teosinte plots producing less GHG than maize plots. Taken together, these results suggest that Zea genetic variation can lead to changes in N-cycling processes that result in N leaching and N 2 O production, and thereby are selectable targets for crop improvement. Understanding the underlying genetic variation contributing to belowground microbiome N-cycling into our conventional agricultural system could be useful for sustainability.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Investigation of CO2 Sorption Characteristics of Imidazolium Ionic Liquid Crystals

This work is focused on advancing of the understanding the carbon dioxide (CO2) sorption characteristics of imidazolium ionic liquid crystals based on the 1-alkyl-3-methylimidazolium (Cnmim) ionic liquid family. Specifically, the mechanism of sorption across the melting, liquid crystal, and isotropic liquid transitions is investigated for 1-tetradecyl-3-methylimidazolium tetrafluoroborate (BF4-) and hexafluorophosphate (PF6-). A unique reversible CO2 occlusion was observed in 1-tetradecyl-3-methylimidazolium tetrafluoroborate (C14mim BF4) under rapid temperature quench from the liquid phases to the solid phase, while complete desorption occurred upon heating above the melting point (40 degrees C). In situ wide-angle x-ray scattering revealed that the lamellar structure of C14mim BF4 liquid crystal phases provides a high concentration of dynamically accessible anion and cation interaction sites for CO2, facilitating CO2 occlusion upon rapid solidification. The selective occlusion of CO2 in C14mim BF4 suggests a new mechanism for CO2 sorption processes.

08 HYDROGEN↗
DOE OSTI2024

Storm surges and extreme sea levels: Review, establishment of model intercomparison and coordination of surge climate projection efforts (SurgeMIP).

Coastal flood damage is primarily the result of extreme sea levels. Climate change is expected to drive an increase in these extremes. While proper estimation of changes in storm surges is essential to estimate changes in extreme sea levels, there remains low confidence in future trends of surge contribution to extreme sea levels. Alerting local populations of imminent extreme sea levels is also critical to protecting coastal populations. Both predicting and projecting extreme sea levels require reliable numerical prediction systems. The SurgeMIP (surge model intercomparison) community has been established to tackle such challenges. Efforts to intercompare storm surge prediction systems and coordinate the community 's prediction and projection efforts are introduced. An overview of past and recent advances in storm surge science such as physical processes to consider and the recent development of global forecasting systems are briefly introduced. Selected historical events and drivers behind fast increasing service and knowledge requirements for emergency response to adaptation considerations are also discussed. The community 's initial plans and recent progress are introduced. These include the establishment of an intercomparison project, the identification of research and development gaps, and the introduction of efforts to coordinate projections that span multiple climate scenarios.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Soft Nanoconfinement Nucleates and Stabilizes Ultrasmall Amorphous Calcium Carbonate from Aggregation

Organisms use soft confinement structures, such as vesicles and compartments, to direct the nucleation of calcium carbonate (CaCO 3 ) and its subsequent processes during biomineralization. Despite recent efforts elucidating confinement’s effects on CaCO 3 polymorph selection, we still poorly understand how the size and distribution of CaCO 3 are controlled within soft confinement. Here, using a size-controlled nanoemulsions system made from isooctane, Span 80, Tween 80, and aqueous solutions, we studied CaCO 3 formation in soft confinement. Small angle X-ray scattering (SAXS) confirmed that a 72 nm aqueous core in nanoemulsions served as the confined space for CaCO 3 formation. Unlike the ~ 50 nm CaCO 3 particles that formed in the unconfined solution, small angle neutron scattering (SANS) and transmission electron microscope (TEM) showed that ultrasmall and amorphous calcium carbonate precipitated within soft confinement and did not exhibit any aggregation/coalescence of nanoparticles even after 24 hrs of reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Simulated Moving Bed Process for CO 2 Capture from Humid Postcombustion Flue Gases Using MUF-16

Simulated moving bed (SMB) designs are increasingly being adapted for the separation of multicomponent gaseous mixtures. In this work, we develop a modified SMB process for capturing CO 2 from humid postcombustion flue gas using MUF-16 (MUF = Massey University Framework). MUF-16 shows excellent selectivity for CO 2 over N 2 , moderate heats of adsorption for CO 2 and H 2 O, and no competitive sorption of CO 2 over water at relative humidities relevant to postcombustion capture. We utilize these characteristics to propose a continuous process that uses N 2 from the feed as the desorbent for the water, eliminating the need for a separate desiccant bed and allowing for localized heating during desorption for H 2 O-saturated MOF beds. Single-component isotherms, single-column breakthrough experiments, and SO 2 stability tests suggest the excellent suitability of MUF-16 to this separation via the proposed SMB design.

CO2 capture from humid flue gas↗
DOE OSTI2024

Additive manufacturing of LiCoO 2 electrodes via vat photopolymerization for lithium ion batteries

Additive manufacturing has the potential to revolutionize the fabrication of lithium-ion batteries for a diversity of applications including in portable, biomedical, aerospace, and the transportation fields. Standard commercial batteries consist of stacked layers of various components (current collectors, cathode, anode, separator and electrolyte) in a two-dimensional manner. By leveraging the latest advances in additive manufacturing and computer-aided design, an improved geometric and electrochemical configuration of these batteries can maximize energy efficiency while allowing design optimization to reduce dead space for a given application. In this work, a composite UV photosensitive resin was prepared and used as feedstock in a vat photopolymerization system. The resin was loaded with LiCoO 2 acting as electrochemically active material for the cathode of a lithium-ion battery, and was further improved with the addition of conductivity-enhancing carbonaceous additives. Challenges to additive manufacturing arise from the opacity and high viscosity of the composite nature of these electrochemically-active resins, which cause light refraction during selective UV curing. Subsequently, items were printed and subjected to a thermal post-processing step to obtain an adequate compromise between electrochemical performance and mechanical integrity. Both sintered and green state 3D printed cathodes were assembled into half-cell lithium-ion batteries using lithium metal as a reference and counter electrode. Electrochemical cycling of these batteries yielded satisfactory results approaching commercial LiCoO 2 cathodes’ performance, with the potential advantages of additive manufacturing – high surface area anode–cathode configurations for power performance as well as shape conformability.

25 ENERGY STORAGE↗
DOE OSTI2024

Uncertainty quantification of mass models using ensemble Bayesian model averaging

Developments in the description of the masses of atomic nuclei have led to various nuclear mass models that provide predictions for masses across the whole chart of nuclides. These mass models play an important role in understanding the synthesis of heavy elements in the rapid neutron capture ( r ) process. However, it is still a challenging task to estimate the size of uncertainty associated with the predictions of each mass model. In this work, a method called ensemble Bayesian model averaging (EBMA) is introduced to quantify the uncertainty of one-neutron separation energies (S 1 n ) which are directly relevant in the calculations of r -process observables. Here, this Bayesian method provides a natural way to perform model averaging, selection, and uncertainty quantification, by combining the mass models as a mixture of normal distributions whose parameters are optimized against the experimental data, employing the Markov chain Monte Carlo method using the no-u-turn sampler. The EBMA model optimized with all the experimental S 1 n from the AME2003 nuclides are shown to provide reliable uncertainty estimates when tested with the new data in the AME2020.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Long-Term Stability in Perovskite Solar Cells Through Atomic Layer Deposition of Tin Oxide

Robust contact schemes that boost stability and simplify the production process are needed for perovskite solar cells (PSCs). We codeposited perovskite and hole-selective contact while protecting the perovskite to enable deposition of SnOx/Ag without the use of a fullerene. The SnOx, prepared through atomic layer deposition, serves as a durable inorganic electron transport layer. Tailoring the oxygen vacancy defects in the SnOx layer led to power conversion efficiencies (PCEs) of >25%. Our devices exhibit superior stability over conventional p-i-n PSCs, successfully meeting several benchmark stability tests. They retained >95% PCE after 2000 hours of continuous operation at their maximum power point under simulated AM1.5 illumination at 65degrees C. Additionally, they boast a certified T97 lifetime exceeding 1000 hours.

c60↗