Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROLLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Rolling Horizon with K-Position Search Method for Strategic Deconfliction of Package Delivery UAS

In this research, the strategic deconfliction of unmanned aircraft systems for an urban package delivery environment with two depots and multiple drop-off locations is studied. This research aims to formulate a mathematical model to compute both the departure sequence and scheduled time of departure for each unmanned aircraft system at a depot, considering temporal constraints at en-route crossing waypoints and depots for strategic deconfliction. However, the problem formulation results in an NP-hard mixed-integer nonlinear programming problem for the global optimal solution, so instead, a "rolling horizon with𝑘-position search"heuristic method is developed. The simulation studies show that an increase in the value of𝑘(the parameter used to determine the size of the local neighborhood) reduces the average ground delay at the cost of an increase in the computation time for a given problem size. The study also shows an order of magnitude increase in the maximum number of flights scheduled with the integration of rolling horizon (time decomposition) compared to those without the integration of rolling horizon in the heuristic algorithm for a given computation time cut off.

UTM↗
DOE OSTI2020

Sound-masking device for a roll-up door

A portable sound-masking device for placing on a roll-up door having a number of horizontally-extending elements. The sound-masking device has a fixture, a magnet, and a transducer. The fixture has an inner face, an outer face, and a pair of spaced-apart tabs protruding from the inner face, the tabs being configured to engage one of the horizontally-extending elements of the roll-up door. The magnet is fastened to the inner face of the fixture and provides a force that tethers the sound-masking device to the roll-up door. The transducer is fastened to the outer face and is configured to emit sound-masking noise.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2017

Computer security approach for Rolls-Royce spinline{sup R} safety platform - 227

The number of digital assets at commercial nuclear power plants is significant and will likely continue to increase with time. As a consequence, these plants have become potential targets for cyber-attacks. Around the world, nuclear safety authorities and national Computer and Information Security Agencies are implementing stricter regulations and inspections for critical systems in nuclear plants. There is a particular focus on instrumentation and control systems as they implement key nuclear safety functions. Rolls-Royce follows a strict computer and information security program based on general and nuclear specific norms, Rolls-Royce group processes, and proven technologies. The Spinline digital safety platform has been designed specifically for nuclear applications and features a secure development and operational environment that provides barriers against unauthorized modifications and implements design requirements promoting integrity and reliability during operation and maintenance. The Rolls-Royce secure development environment provides layers of protection utilizing physical and environmental security, human resource security, and information technology systems access control. The Spinline platform strengthens security functions by providing protection against unauthorized, unintended, and unsafe modifications to the system. The Spinline platform has design features promote integrity and reliability during operation and maintenance in the event of inadvertent operator actions or undesirable behavior of connected equipment. The Spinline technology and these computer security processes are based in a wide spectrum of international standards that were accepted as providing a secure development and operating environment by the United States Nuclear Regulatory Commission in 2014. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Processing of Dilute Mg–Zn–Mn–Ca Alloy/Nb Multilayers by Accumulative Roll Bonding

Recent advancements in the severe plastic deformation process called accumulative roll bonding (ARB) can help to address the long-standing need for manufacturing lightweight, high-strength Mg sheet materials. However, the fabrication of Mg alloy-based laminates via ARB remains a challenge due to the intrinsically poor formability of Mg. Herein, it is shown that Mg-based composite laminates with refined layers can be fabricated via several room-temperature ARB cycles with appropriate intermediate annealing and alloy selection. The final laminates made here consist of equal volume fractions of a dilute Mg–Zn–Mn–Ca alloy phase and a pure Nb phase with fine 150 μm layer thicknesses. Deformation texture evolution in both phases within the composite is analyzed via neutron diffraction measurements taken at different stages in the process. The analysis suggests that the annealing step recrystallizes the Mg-alloy phase. It is also shown that for both phases, the stabilized deformation textures within the composite correspond to the classic stable textures of the individual constituents. Polycrystal texture modeling implies that {10–12} <-1011> extension twinning developed in the Mg alloy during rolling.

36 MATERIALS SCIENCE↗
DOE OSTI2019

An approach for visualizing the spatial metabolome of an entire plant root system inspired by the Swiss-rolling technique

The spatial configuration and morphology of roots are commonly monitored for a better understanding of plant health and development. However, this approach provides minimal details about the biochemistry regulating the observable traits. Therefore, the ability to metabolically map the entire root structure would be of major value. Here, we developed a sample preparation approach that enables imaging of the entire root within a restricted space (width of microscope slide), which was influenced by the Swiss-rolling technique. By using this technique, we were able to image and confidently identify molecules along the entire root structure from rolled-root tissue sections using multiple spatially resolved mass spectrometry approaches.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel

The experimentally measured grain-orientation-dependent residual lattice strains, evolved in an interstitia-free steel after 70% cold rolling reduction, are studied by means of crystal elastic visco-plastic finite element simulations, which provides a very satisfactory prediction of deformation texture. The calculated residual lattice strain pole figure matches well with the experimentally measured counterpart within the highest density regions of major texture components observed. Both experimental evidence and results of modeling clearly indicate that the residual lattice strain is orientation dependent, based on comprehensive information on the evolution of residual lattice strain in various crystallographic orientations during plastic deformation. It appears that in a cold rolled material, there is a general correlation between the stresses developed just prior to unloading and the residual lattice strains in particular directions. Here, it is also shown that the cumulative plastic shear does not reveal a clear correlation with the components of residual lattice strain while presented in the normal correlation plot, however, this relationship can be better understood by means of the orientation distribution function of residual lattice strain, which can be derived from the neutron or X-ray diffraction experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Accumulative Roll Bonding of Alloy 2205 Duplex Steel and the Accompanying Impacts on Microstructure, Texture, and Mechanical Properties

The mechanical and microstructural evolution of Alloy 2205 during severe plastic deformation is examined in this study. A combination of accumulative roll bonding (ARB) and cold rolling results in the successful formation of a nanograined dual-phase microstructure of austenite and ferrite with some transformed martensite. Severe deformation to cumulative reductions of 80.5, 92.5, 95, and 97 pct were performed. Microscopy indicates that grain dimensions in the sheet normal direction is less than 100 nm for reductions ≥ 92.5 pct. Shear banding is observed at reductions ≥ 95 pct while twinning is only observed at reductions < 92.5 pct. Neutron diffraction measurements indicated the presence of martensite for reductions ≥ 95 pct at ~ 8 pct volume fraction. Taken in conjunction, it appears that during initial ARB processing, both slip and twinning are active plastic mechanisms. As twinning becomes exhausted, martensitic transformation, slip, and intermittent shear banding account for the active plasticity mechanisms. Material hardness saturates at 92.5 pct reduction, with a maximum hardness of 45 HRC. Sub-sized tensile testing confirms this approximate hardness with measurements indicating a UTS of ~ 1440 MPa. Texture analysis of crystal orientation distributions in the plate normal direction suggest an approximate Kurdjumov–Sachs orientation relationship at all reductions above 80 pct indicating stability of the orientation relationship at high strains. The intragranular structure develops a fine scale sub-grain content with increasing deformation, resulting in a continual evolution of texture up to and including 97 pct reduction. The final structure presents strong components of Goss and rotated cube texture in both the austenite and ferrite. In this body of work we aim to compare ARB of an industrially relevant FCC/BCC system (Alloy 2205) to historical model FCC/BCC systems such as Cu/Nb.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Control of Carbon Content in Steel by Introducing Proeutectoid Ferrite Transformation into Hot-Rolled Q&P Process

A processing strategy involving primary and secondary carbon partitioning is proposed for the hot-rolled quenching and partitioning process through the introduction of proeutectoid ferrite transformation after rolling. The microstructures of the steels were characterized using scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, and x-ray diffraction, and the mechanical properties were evaluated using a universal tensile machine. The blocky retained austenite that distributed along the ferrite grain boundaries was promoted based on the coupling action of the primary and secondary carbon partitioning, which enhanced the transformation-induced plasticity effect during deformation despite the high carbon concentration. A ferrite formation temperature range of ~ 760 to 800 °C was proposed. In addition, from the perspective of industrialization, the observed ‘plateau trends’ for the retained austenite fraction and product of strength and elongation suggest the availability of a wide processing window of 215-362 °C for controlling the coiling temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effect of Rolling Temperature on Fracture Properties of INRAFMS at Different Temperatures

Two heats of Indian reduced activation ferritic / martensitic steel have been produced with similar chemical composition and identical process parameters except the start and final rolling temperature referred as P950 and P1050, respectively. Fracture behaviours of both the heats have been evaluated, and it was found that quasistatic fracture properties are better for P1050 than P950. An attempt is made to establish the reasons for the observed behaviour through optical, scanning electron microscopic, electron backscatter diffraction and transmission electron microscopic studies. These variations are attributed to the difference in rolling temperature of both heats. P1050 meets the acceptance criteria as per Indian specifications, and it compares favourably with the international grades of equivalent RAFM steels.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Enhanced Surface Properties and Microstructure Evolution of Cr12MoV Using Ultrasonic Surface Rolling Process Combined with Deep Cryogenic Treatment

In this study, the enhanced surface properties and microstructure evolution of quenched and tempered cold work die steel Cr12MoV, which were induced by ultrasonic surface rolling process combined with deep cryogenic treatment (UDCT), were systematically investigated. The results indicated that UDCT had an advantage over conventional ultrasonic surface rolling process (USRP) in improving surface mechanical properties, including smaller surface roughness and smoother machined surface with less cracks and defects; higher surface microindentation hardness with the value of ~ 890 HV (increased by ~ 6.2% compared with USRP); and lower friction coefficient. Such enhancements in surface properties are mainly attributed to the martensitic transformation of retained austenite, the dispersion strengthening of small secondary carbides and the homogenized carbides distribution during UDCT.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Rolling Optimization of Transmission Network Recovery and Load Restoration Considering Hybrid Wind-Storage System and Cold Load Pickup

A common solution to deal with the stochasticity introduced by fast-ramping wind power integration is to equip wind farms (WFs) with energy storage systems (ESSs) to formulate hybrid WF-ESSs. In addition to leveling off wind power fluctuations during normal operations, a hybrid WF-ESS can be a flexible power source to accumulate the power system restoration. In this paper, we propose a rolling optimization model for transmission network recovery and load restoration considering the contributions of WF-ESSs. The proposed model is formulated as a mixed integer linear programming problem that simultaneously optimizes the amount and location of restorable load blocks as well as the restoration lines. The cold load pickup features of interrupted loads considering the outage duration are modeled in detail. A chance-constrained method is employed to deal with the uncertainty of wind power, and a rolling horizon-based framework is adopted to reduce the influence of forecast error. Case studies are conducted on both New England 39-bus system and part of a provincial power system in China. The results show that the load restoration process can be significantly accelerated by employing the proposed method and contributions of hybrid WF-ESSs to power system restoration are validated.

chance-constrained optimization↗
DOE OSTI2016

Deformation induced dynamic recrystallization and precipitation strengthening in an Mg−Zn−Mn alloy processed by high strain rate rolling

The microstructure of a high strain-rate rolled Mg−Zn−Mn alloy was investigated by transmission electron microscopy to understand the relationship between the microstructure and mechanical properties. The results indicate that: (1) a bimodal microstructure consisting of the fine dynamic recrystallized grains and the largely deformed grains was formed; (2) a large number of dynamic precipitates including plate-like MgZn{sub 2} phase, spherical MgZn{sub 2} phase and spherical Mn particles distribute uniformly in the grains; (3) the major facets of many plate-like MgZn{sub 2} precipitates deviated several to tens of degrees (3°–30°) from the matrix basal plane. It has been shown that the high strength of the alloy is attributed to the formation of the bimodal microstructure, dynamic precipitation, and the interaction between the dislocations and the dynamic precipitates. - Highlights: •A bimodal microstructure was formed in a high strain-rate rolled Mg−Zn−Mn alloy. •Plate-like MgZn{sub 2}, spherical MgZn{sub 2} and spherical Mn phases were observed. •The major facet of the plate-like MgZn{sub 2} deviated from the matrix basal plane.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Twinning behaviors of a rolled AZ31 magnesium alloy under multidirectional loading

The microstructure and texture evolution of an AZ31 magnesium rolled sheet during quasi-static compression at strain rates of 10{sup −3} s{sup −1} has been investigated by in situ electron backscattered diffraction. The influence of the initial and pre-deformed texture on the predominant deformation mechanisms during compression has been examined. It has been found that extensive grain reorientation due to (10 − 12) tensile twinning appeared when compressed along transverse direction. Tensile twin variants were observed under this loading condition, and different variants will cause an effect to the following deformation. Several twinning modes occurred with continuative loading along rolling direction. - Highlights: •Twinning behaviors were investigated through in situ multidirectional compressive tests. •Deformation behavior was affected by the twin variants. •Four types of twinning behaviors were observed during deformation process.

36 MATERIALS SCIENCE↗
DOE OSTI2017

A quasi-in-situ EBSD observation of the transformation from rolling texture to recrystallization texture in V-4Cr-4Ti alloy

Recrystallization texture evolution of rolled V-4Cr-4Ti alloy has been investigated by quasi-in-situ EBSD (electron back-scattering diffraction) method. Concurrently, the precipitates were characterized by SEM (Scanning Electron Microscopy). It was found that both the initial rolling textures and the distribution of the precipitates affected the formation of the recrystallization texture. It was revealed that the texture transformations of (558) 〈110〉 + (665) 〈110〉 to (334) 〈483〉 + (665) 〈1 1 2.4〉 were possibly attributed to the selective drag induced by the sparsely dispersed Ti-rich precipitates. While the densely distributed Ti-rich precipitates were responsible for the randomized recrystallization texture. Finally, when the precipitates were absent, the orientation changes from (112) 〈110〉 and (558) 〈110〉 to (111) 〈112〉 and (001) <110> to (001) <520> were observed. - Highlights: • Micro recrystallization texture evolution in V-4Cr-4Ti alloys is reported for the first time. • The volume fraction of Ti-rich precipitates has significant effect on the recrystallization texture evolution. • The dissolution of the Ti-rich precipitates above 1100 °C induces the strengthening of (111) <112> texture.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Microstructure evolution and mechanical performance of copper processed by equal channel angular rolling

Highlights: • Copper was processed by equal channel angular rolling (ECAR) up to 33 passes. • A very fine grained microstructure with high dislocation density was developed. • A decrease of dislocation density was observed for high numbers of passes. • The proof stress saturated at a value of about 400 MPa. • ECAR is a possible way of commercialization of ultrafine-grained materials. - Abstract: Ultrafine-grained (UFG) oxygen free high conductivity (OFHC) Cu samples were processed by severe plastic deformation (SPD) using the method of equal channel angular rolling (ECAR) up to 33 passes at room temperature. It was found that the grain size gradually decreased from ~ 40 μm to ~ 250 nm with increasing the number of passes. A maximum dislocation density of ~ 21 × 10{sup 14} m{sup − 2} was achieved after 13 passes of ECAR. For large numbers of passes (between 23 and 33), the dislocation density decreased to ~ 14 × 10{sup 14} m{sup − 2}. The proof stress was saturated at the value of about 400 MPa. The stored energy was measured by calorimetry and compared with the values calculated from the parameters of the microstructure. The reduction of the released heat after 13 and 33 passes suggested structural relaxation of the UFG microstructure. For these numbers of passes, the reduction of area in tensile testing was improved without decreasing the proof stress. The correlation between the microstructure and the mechanical behavior was discussed in detail. It was found that ECAR is capable for the mass-production of UFG metallic materials with high strength, therefore this method is a possible way of commercialization of SPD-processed materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dynamic condensation model of rolling droplets for high-performance heat transfer

Condensation is a critical process during vapor-liquid phase change in relation to heat transfer. To achieve a high heat transfer coefficient, the classical model for dropwise condensation requires a low contact angle and low contact angle hysteresis, failing to align with experimental observations on a hydrophobic and slippery quasi-liquid surface (QLS). Here, we report a dynamic condensation model that incorporates high-frequency condensate removal by emphasizing the role of timescale during droplet growth and shedding. Our model agrees well with the experimental result that a surface with high contact angle and low contact angle hysteresis promotes condensation, particularly during rolling-propelled condensate removal. Particle image velocimetry reveals that rolling droplets on a hydrophobic QLS exhibit 4-fold higher shedding speeds than the sliding droplets on a hydrophilic QLS, leading to significant heat transfer enhancement. This work deepens our theoretical understanding of condensation heat transfer and provides advanced physics-informed design rationales for water and energy systems.

42 ENGINEERING↗
DOE OSTI2019

Two novel bipolar hosts based on 1,2,4-triazole derivatives for highly efficient red phosphorescent OLEDs showing a small efficiency roll-off

Achieving high efficiency and small efficiency roll-off simultaneously for red phosphorescent organic light-emitting diodes (PhOLEDs) is still a challenge, which is largely related to the host material used in device fabrication. In this wok, we designed and synthesized two novel bipolar host materials, termed 2Cz-TAZ-2Cz and 3Cz-TAZ-3Cz in which 1,2,4-triazole was introduced at the C-2 and C-3 positions of 9-phenylcarbazole, respectively. The materials' photophysical properties were studied in detail.. It was found that 2Cz-TAZ-2Cz and 3Cz-TAZ-3Cz possess excellent thermal stability with thermal decomposition temperature (Td) of 457 and 432 °C, respectively, and that 2Cz-TAZ-2Cz has a better bipolar carrier transport compared to the typical host 4, 4'-bis(9H-carbazole-9-yl)-biphenyl (CBP). Based on the excellent performance of these materials, red phosphorescent OLEDs with 2Cz-TAZ-2Cz and 3Cz-TAZ-3Cz as hosts and bis(1-phenylisoquinoline)(acetylacetonate)iridium (III) (Ir(piq) 2 acac) as emitter were fabricated. The optimized 2Cz-TAZ-2Cz -based device achieved a high maximum current efficiency and external quantum efficiency (EQE) of 12.4 cd/A and 16.60%, respectively. Moreover, this device also exhibits a small efficiency roll-off, i.e., the EQE is lowered by only 12.0% and 29.4% at a brightness of 1000 cd/m 2 and 10,000 cd/m 2 , respectively, which is superior to CBP-based device, indicating a potential far-reaching application.

42 ENGINEERING↗
DOE OSTI2023

Thermal Properties of Polymer Hole-Transport Layers Influence the Efficiency Roll-off and Stability of Perovskite Light-Emitting Diodes

While the performance of metal halide perovskite light-emitting diodes (PeLEDs) has rapidly improved in recent years, their stability remains a bottleneck to commercial realization. Here, we show that the thermal stability of polymer hole-transport layers (HTLs) used in PeLEDs represents an important factor influencing the external quantum efficiency (EQE) roll-off and device lifetime. We demonstrate a reduced EQE roll-off, a higher breakdown current density of approximately 6 A cm -2 , a maximum radiance of 760 W sr -1 m -2 , and a longer device lifetime for PeLEDs using polymer HTLs with high glass-transition temperatures. Furthermore, for devices driven by nanosecond electrical pulses, a record high radiance of 1.23 MW sr -1 m -2 and an EQE of approximately 1.92% at 14.6 kA cm -2 are achieved. Thermally stable polymer HTLs enable stable operation of PeLEDs that can sustain more than 11.7 million electrical pulses at 1 kA cm -2 before device failure.

14 SOLAR ENERGY↗