Search NASA⌕ Search

DOE OSTI · 22804827

Microstructure evolution and mechanical performance of copper processed by equal channel angular rolling

Abstract

Highlights: • Copper was processed by equal channel angular rolling (ECAR) up to 33 passes. • A very fine grained microstructure with high dislocation density was developed. • A decrease of dislocation density was observed for high numbers of passes. • The proof stress saturated at a value of about 400 MPa. • ECAR is a possible way of commercialization of ultrafine-grained materials. - Abstract: Ultrafine-grained (UFG) oxygen free high conductivity (OFHC) Cu samples were processed by severe plastic deformation (SPD) using the method of equal channel angular rolling (ECAR) up to 33 passes at room temperature. It was found that the grain size gradually decreased from ~ 40 μm to ~ 250 nm with increasing the number of passes. A maximum dislocation density of ~ 21 × 10{sup 14} m{sup − 2} was achieved after 13 passes of ECAR. For large numbers of passes (between 23 and 33), the dislocation density decreased to ~ 14 × 10{sup 14} m{sup − 2}. The proof stress was saturated at the value of about 400 MPa. The stored energy was measured by calorimetry and compared with the values calculated from the parameters of the microstructure. The reduction of the released heat after 13 and 33 passes suggested structural relaxation of the UFG microstructure. For these numbers of passes, the reduction of area in tensile testing was improved without decreasing the proof stress. The correlation between the microstructure and the mechanical behavior was discussed in detail. It was found that ECAR is capable for the mass-production of UFG metallic materials with high strength, therefore this method is a possible way of commercialization of SPD-processed materials.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kvackaj, T., Kovacova, A., Kocisko, R., Bidulska, J., Litynska–Dobrzynska, L., Jenei, P.. 2017-12-15. Microstructure evolution and mechanical performance of copper processed by equal channel angular rolling. https://doi.org/10.1016/j.matchar.2017.10.030. https://searchnasa.com/record/osti%3A22804827/microstructure-evolution-and-mechanical-performance-of-copper-processed-by-equal-channel-angular-rol

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗