Search NASA⌕ Search

SEARCH · Search NASA

Results for “preforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Two patterns of PT-symmetry breakdown in a non-numerical six-state simulation

Highlights: • Hot topic (PT symmetry breakdown in quantum theory) studied. • Next to elementary toy model considered. • Characteristic features (like quantum phase transitions) sampled. • Surprisingly, the results are non-numerical. • The method (inverse-function treatment) is brand new. - Abstract: Three-parametric family of non-Hermitian but PT-symmetric six-by-six matrix Hamiltonians H{sup (6)}(x,y,z) is considered. The PT-symmetry remains spontaneously unbroken (i.e., the spectrum of the bound-state energies remains real so that the unitary-evolution stability of the quantum system in question is shown guaranteed) in a non-empty domain D{sup (physical)} of parameters x,y,z. The construction of the exceptional-point (EP) boundary ∂D{sup (physical)} of the physical domain is preformed using an innovative non-numerical implicit-function-construction strategy. The topology of the resulting EP boundary of the spontaneous PT-symmetry breakdown (i.e., of the physical “horizon of stability”) is shown similar to its much more elementary N=4 predecessor. Again, it is shown to consist of two components, viz., of the region of the quantum phase transitions of the first kind (during which at least some of the energies become complex) and of the quantum phase transitions of the second kind (during which some of the level pairs only cross but remain real).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of choosing the Q{sub α}-values and daughter density distributions on the magic numbers predicted by α decays

We investigated the effects of choosing the α-decay energy (Q{sub α}) and particular density distributions of the daughter nuclei on predicting unknown magic numbers, or confirming some of them. The Q{sub α} values were calculated using three models, namely the finite-range droplet model (FRDM), the Weizsäcker–Skyrme (WS4) mass model, and a recent fitting formula. The α-decay half-lives (T{sub α}) of superheavy nuclei of Z = 118–124 have been calculated within the generalized density-dependent cluster model. The double-folding α+core potential was determined based on the M3Y-Reid nucleon–nucleon interaction. We have used the two-parameter Fermi distribution to represent the nuclear density, with four sets of parameters that were determined based on electron scattering data and different microscopic calculations. Upon investigating the relative stability of the mentioned superheavy isotopic chains, we found that the Q{sub α}-values deduced from FRDM and WS4 models predict different neutron magic numbers. The examined fitting formula failed to predict any magic number larger than N = 162. Under normalization to the proton and neutron (N) numbers, the different choices of the density distributions showed almost no effect on the general behavior of T{sub α} with N, but changed its values up to one order of magnitude. Even though the maxima and minima of T{sub α} clearly follow the characteristic minima and maxima of Q{sub α}, respectively, the results showed that precise density distribution and deformations, in addition to a correct preformation probability, are necessarily required for estimating an accurate value of the half-life.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A {beta}{sub 2}-microglobulin cleavage variant fibrillates at near-physiological pH

{beta}{sub 2}-microglobulin ({beta}{sub 2}m) deposits as amyloid in dialysis-related amyloidosis (DRA), predominantly in joints. The molecular mechanisms underlying the amyloidogenicity of {beta}{sub 2}m are still largely unknown. In vitro, acidic conditions, pH < 4.5, induce amyloid fibrillation of native {beta}{sub 2}m within several days. Here, we show that amyloid fibrils are generated in less than an hour when a cleavage variant of {beta}{sub 2}m-found in the circulation of many dialysis patients-is exposed to pH levels (pH 6.6) occurring in joints during inflammation. Aggregation and fibrillation, including seeding effects with intact, native {beta}{sub 2}m were studied by Thioflavin T fluorescence spectroscopy, turbidimetry, capillary electrophoresis, and electron microscopy. We conclude that a biologically relevant variant of {beta}{sub 2}m is amyloidogenic at slightly acidic pH. Also, only a very small amount of preformed fibrils of this variant is required to induce fibrillation of native {beta}{sub 2}m. This may explain the apparent lack of detectable amounts of the variant {beta}{sub 2}m in extracts of amyloid from DRA patients.

60 APPLIED LIFE SCIENCES↗

Intestinal and peritoneal mast cells differ in kinetics of quantal release

5-hydroxytriptamine (5-HT, serotonin) storage and release in mast cell (MC) secretory granules (SG) are dependent on serglycin proteoglycans (PG). This notion is based on the studies of MC of the connective tissue subtype that predominantly contain PG of the heparin type, whereas intestinal mucosal MC, which contain predominantly chondroitin sulfate, have been poorly explored. In the present study, we addressed the possibility that PG contents may differently affect the storage and release of preformed mediators in these two MC subclasses and explain in part their different functional properties. Rat peritoneal (PMC) and intestinal mast cells (IMC) were isolated and purified using a percoll gradient, and the efflux of 5-HT from each SG was measured by amperometric detection. IMC exhibited a ∼34% reduction in the release of 5-HT compared with PMC because of a lower number of exocytotic events, rather than a lower secretion per single exocytotic event. Amperometric spikes from IMC exhibited a slower decay phase and increased half-width but a similar ascending phase and foot parameters, indicating that the fusion pore kinetics are comparable in both MC subclasses. We conclude that both PG subtypes are equally efficient systems, directly involved in serotonin accumulation, and play a crucial role in regulating the kinetics of exocytosis from SG, providing specific secretory properties for the two cellular subtypes. - Highlights: • We improved a method for isolating and purifying IMC. • There was a reduction in total serotonin release in IMC with respect to PMC. • This decrease was not due to less secretion per quantum but a lower number of exocytotic events. • There was also a deceleration of exocytosis in IMC with respect to PMC.

60 APPLIED LIFE SCIENCES↗

β1,6 GlcNAc branches-modified protein tyrosine phosphatase Mu attenuates its tyrosine phosphatase activity and promotes glioma cell migration through PLCγ-PKC pathways

The metastatic potential of malignant tumor has been shown to be correlated with the increased expression of tri- and tetra-antennary β1,6-N-acetylglucosamine (β1,6-GlcNAc) N-glycans. In this study, We found that GnT-V expression was negatively correlated with receptor protein tyrosine phosphatase type μ(RPTPμ) in human glioma tissues. To study whether RPTPμ is a novel substance of GnT-V which further affect RPTPμ′s downstream dephosphorylation function, we preform lentiviral infection with GnT-V gene to construct stably transfected GnT-V glial cell lines. We found RPTPμ undergone severer cleavage in GnT-V transfected glioma cells compare to Mock cells. RPTPμ intracellular domain fragments increased while β1,6-GlcNAc-branched N-glycans increased, in consistent with the decrease of RPTPμ′s catalytic activity. The results showed that abnormal glycosylation could decrease the phosphorylation activity of PTP μ, and affect PLCγ-PKC pathways. Both protease inhibitor Furin and N-glycan biosynthesis inhibitor swainsonine could decrease cell mobility in GnT-V-U87 transfectants and other glioma cell lines. All results above suggest increased post-translational modification of RPTPμ N-glycans by GnT-V attenuates its tyrosine phosphatase activity and promotes glioma cell migration through PLCγ-PKC pathways, and that the β1,6-GlcNAc-branched N-glycans of RPTPμ play a crucial role in glioma invasivity.

60 APPLIED LIFE SCIENCES↗

Two distinct rotations of bithiazole DNA intercalation revealed by direct comparison of crystal structures of Co(III)•bleomycin A 2 and B 2 bound to duplex 5'-TAGTT sites

Bleomycins constitute a family of anticancer natural products that bind DNA through intercalation of a C-terminal tail/bithiazole moiety and hydrogen-bonding interactions between the remainder of the drug and the minor groove. The clinical utility of the bleomycins is believed to result from single- and double-strand DNA cleavage mediated by the HOO-Fe(III) form of the drug. The bleomycins also serve as a model system to understand the nature of complex drug-DNA interactions that may guide future DNA-targeted drug discovery. In this study, the impact of the C-terminal tail on bleomycin-DNA interactions was investigated. Toward this goal, we determined two crystal structures of HOO-Co(III)•BLMA 2 “green” (a stable structural analogue of the active HOO-Fe(III) drug) bound to duplex DNA containing 5'-TAGTT, one in which the entire drug is bound (fully bound) and a second with only the C-terminal tail/bithiazole bound (partially bound). The structures reported here were captured by soaking HOO-Co(III)•BLMA 2 into preformed host–guest crystals including a preferred DNA-binding site. While the overall structure of DNA-bound BLMA 2 was found to be similar to those reported earlier at the same DNA site for BLMB 2 , the intercalated bithiazole of BLMB 2 is “flipped” 180° relative to DNA-bound BLMA 2 . Further, this finding highlights an unidentified role for the C-terminal tail in directing the intercalation of the bithiazole. In addition, these analyses identified specific bond rotations within the C-terminal domain of the drug that may be relevant for its reorganization and ability to carry out a double-strand DNA cleavage event.

59 BASIC BIOLOGICAL SCIENCES↗

Interpreting Temperature Strain Data from Meso-Scale Clathrate Experiments

Gas hydrates are important in global climate change, carbon sequestra- tion, and seafloor stability. Currently, formation and dissociation pathways are poorly defined. We present a new approach for processing large amounts of data from meso-scale experiments, such as the LUNA distributed sensing system (DSS) in the seafloor process simulator (SPS) at Oak Ridge National Laboratory. The DSS provides a proxy for temperature measurement with a high spatial resolution allowing the heat of reaction during gas hydrate formation/dissociation to aid in locating clathrates in the vessel. The DSS fibers are placed in the sediment following an Archimedean spiral design and then the position of each sensor is solved by iterating over the arc length formula with Newtons method. The data is then gridded with 1 a natural neighbor interpolation algorithm to allow contouring of the data. The solution of the sensor locations is verified with hot and cold stimulus in known locations. An experiment was preformed with a vertically split column of sand and silt. The DSS system clearly showed hydrate forming in the sand first, then slowly creeping into the silt. Similar systems and data processing techniques could be used for monitoring of hydrates in natural environments or in any situation where a hybrid temperature/strain index is useful. Further ad- vances in fiber technology allow the fiber to be applied in any configuration and the position of each sensor to be precisely determined making practical applications easier.

54 ENVIRONMENTAL SCIENCES↗

NOx Storage-Reduction Characteristics of Ba-Based Lean NOx Trap Catalysts Subjected to Simulated Road Aging

Although Lean NO{sub x} Trap (LNT) catalyst technology has made significant strides in recent years, the issue of LNT durability remains problematic. Following on from our previous research concerning the effect of ceria addition on LNT preformance, in this study we focus on the role of ceria in ameliorating the deterioration of Ba-based LNT catalysts during aging. Indeed, we have observed that spectacular improvements in LNT durability can be achieved through the incorporation of CeO{sub 2}-ZrO{sub 2} into the LNT formulation, and, to a lesser extent, La-stabilized ceria.

54 ENVIRONMENTAL SCIENCES↗

A new system for crack closure of cementitious materials using shrinkable polymers

This paper presents details of an original crack-closure system for cementitious materials using shrinkable polymer tendons. The system involves the incorporation of unbonded pre-oriented polymer tendons in cementitious beams. Crack closure is achieved by thermally activating the shrinkage mechanism of the restrained polymer tendons after the cement-based material has undergone initial curing. The feasibility of the system is demonstrated in a series of small scale experiments on pre-cracked prismatic mortar specimens. The results from these tests show that, upon activation, the polymer tendon completely closes the preformed macro-cracks and imparts a significant stress across the crack faces. The potential of the system to enhance the natural autogenous crack healing process and generally improve the durability of concrete structures is addressed.

36 MATERIALS SCIENCE↗

Formation, structure, and thermal stability evolution of ternesite based on a single-stage sintering process

Highlights: • The synthesis of high-purity ternesite based on a single-stage sintering process was firstly studied. • The formation mechanism and crystallization behaviour of ternesite during sintering were investigated. • The structure perfection and symmetry of ternesite crystals were increased with its growth. • The growth and structural development of ternesite crystals during sintering resulted in a higher thermal stability of itself. Ternesite was prepared via a single-stage solid-state reaction from stoichiometric quantities of the CaCO{sub 3}, SiO{sub 2} and CaSO{sub 4}·2H{sub 2}O precursors. In this paper, the formation, structure, and thermal stability evolution of ternesite during sintering were investigated ex situ after quenching. The optimal sintering temperature for the formation of high-purity ternesite was approximately 1200 °C for 12 h, of which the purity level can reach as high as 96.3%. The results from scanning electron microscopy analysis suggest that the formation of ternesite benefited from the preformation of the intermediate silicate phase. Increasing the sintering temperature from 1100 °C to approximately 1250 °C was favourable for the growth of ternesite crystals, and a prolonged duration can also promote this behaviour. The structural perfection and symmetry of ternesite crystals increased with its growth, which was demonstrated by a multimethod approach. By means of thermal analysis, the growth and structural development of ternesite crystals during sintering eventually resulted in a higher thermal stability.

36 MATERIALS SCIENCE↗

Multiplicity dependence of (multi-)strange hadrons in oxygen-oxygen collisions at $\sqrt{s_{NN}}$ TeV using EPOS4 and AMPT

It is anticipated that the Large Hadron Collider (LHC) will collect data from oxygen-oxygen (O+O) collisions at a center-of-mass energy of $\sqrt{s_{NN}}$ = 7 TeV to explore the effects observed in high multiplicity proton-proton (p+p) and proton-lead (p+pb) collisions that closely related to lead-lead (Pb+Pb) collisions. Furthermore, these effects include azimuthal asymmetries in particle production, as well as variations in the abundances and momentum distributions across different hadron species, which are indicative of collective particle production mechanisms induced by the interactions in the presence of a QGP. The upcoming data on O+O collisions at the LHC are expected to constrain the model parameters and refine our understanding of theoretical models. In this work, the predicted transverse momentum (p T ) spectra, rapidity density distributions (dN/dy), particle yield ratios, and p T -differential ratios of (multi)strange hadrons produced in O+O collisions at $\sqrt{s_{NN}}$ = 7 TeV using AMPT and EPOS4 models are presented. AMPT focuses on preformed hadronic interactions, while EPOS4 incorporates a QGP phase. Stronger radial flow in EPOS4 as compared to AMPT is also observed. AMPT incorporates some flow effects, but the implementation of full hydrodynamic flow in EPOS4 appears to be significantly more effective in reproducing the existing experimental data. Both models predict the final state multiplicity overlap with p+p, p+pb, and Pb+Pb collisions.

Heavy-ion collisions↗

Simulation toolkit for digital material characterization of large image-based microstructures

In this paper, an efficient image-based simulation toolkit for material characterization is presented, which is scalable to work from personal computers to workstations. The effective thermal conductivity, elasticity, and permeability are evaluated employing a computational homogenization framework based on the Finite Element Method (FEM). Two complementary open-source packages are presented: one developed in Python, which can convert digital images into voxel meshes (pyTomoviewer); the other developed in Julia, that can run numerical simulations to compute effective material properties (chpack). Also, a CUDA C version of chpack is provided (chfem_gpu). They were designed to deal with large multi-phase models, so strategies were devised to minimize their memory footprint, while avoiding a high toll on execution time. The voxel-based approach significantly simplifies the FEM meshes and allows efficient matrix-free implementations. In that sense, to handle large linear systems of equations, the element-by-element (EBE) technique is adopted, in conjunction with a low-memory implementation of the Preconditioned Conjugate Gradient (PCG) method. Finally, the code was thoroughly tested on an artificial geometry made of a square array of cylinders, for which analytical solutions exist, as well as on a real micro-tomographic reconstruction of FiberForm TM , a carbon preform commonly used in thermal protection systems.

36 MATERIALS SCIENCE↗

A numerical study of the meso-structure variability in the compaction process of prepreg platelet molded composites

Compaction deformations in a thermoplastic composite system molded from chopped prepreg platelets were analyzed to obtain statistical distributions of local distortions that define the final consolidated meso-structure. This study provides an insight into and allows quantification of the intrinsic geometric variability of the composite meso-structure that controls the variability of the effective composite mechanical properties. A two-phase viscoelastic finite element model was utilized to treat the behavior of molten prepreg platelets, which were assumed to be incompressible and inextensible in the fiber direction during processing. A two-step simulation procedure with discretely modeled platelets and platelet-to-platelet contacts is proposed. The analysis begins with a drop simulation of the uncontrolled material deposition followed by a 3D finite element analysis of the preform compaction and bulk material flow. The proposed model provides a method for generating a composite meso-structure ab initio starting from a statistical sampling of the initial conditions for platelet deposition. The predicted platelet thickness distribution, intra-platelet fiber waviness and out-of-plane platelet undulations were found to be in good agreement with experimental measurements. An estimate of the volume of resin pockets was inferred from the compaction simulation.

36 MATERIALS SCIENCE↗

Conductive overbraid of continuous fiber thermoplastic composite tows

Here, to meet the increasing demand for lightweight materials with multifunctional capabilities, a new high-rate manufacturing method and material system, referred to as M-TOW ® (multifunctional-tow) is introduced. Overbraiding is used to incorporate highly conductive wire onto the continuous fiber reinforced tow (M-TOW ® ), offering a solution for integrating thermal and electrical conductivity into hybrid-molded composite structures. The conductivity performance of different wire configurations are compared before and after forming the M TOW ® , measuring electrical conductivities up to 5.5 x 10 5 S / cm and thermal conductivities up to 21 W / mK. Results conclude that the integration of conductive wires into thermoplastic preforms is a viable means of expanding the functionality of lightweight, high strength composite structures.

3-dimensional reinforcement↗

Core-shell structured tow-pregs enabled additive manufacturing of continuously reinforced thermoset composites

One of the major challenges in thermally curable polymer composite additive manufacturing is the slow curing time of thermally curable resins, coupled with a significant drop in thermoset viscosity upon heating, making the formation of complex shapes difficult. To tackle these issues, we have introduced a novel rapid composite preformation strategy called Tow-Preg Cladding (TPC). This technique involves the use of a thin and rapidly curable dual-cure resin, which combines a thermally curable resin (such as epoxy) with a fast photo-curable resin. The dual-cure resin is applied as a coating over a thermally curable resin tow-preg, enabling the formation of a rigid cladding that supports and shapes the tow-pregs into the desired geometries and patterns. The key advantage of this approach lies in the sequential formation of an interpenetrating polymer network (IPN) at the interlayer between laminates, resulting from the curing of the photocurable resin and the thermally curable resin sequentially. This IPN formation enhances interlaminar bonding in the composite, contributing to its overall strength and performance. The composites produced using this technique exhibited impressive mechanical properties, including longitudinal tensile strength of 1058.2 MPa, longitudinal tensile modulus of 74.2 GPa, flexural strength of 1080.4 MPa, and flexural modulus of 41.7 GPa. Overall, our Tow-Preg Cladding approach shows great promise in overcoming the challenges associated with thermally curable polymer composite additive manufacturing. It offers a viable solution to creating strong, shape-specific thermoset composites efficiently with enhanced mechanical properties.

42 ENGINEERING↗

Self-healing carbon fiber/epoxy laminates with particulate interlayers of a low-melting-point alloy

In order to prolong the service life of fiber-reinforced polymer composites, the implementation of self-healing ability with the micro-encapsulated healing agent has been extensively studied. However, such microcapsule-based self-healing composites typically suffer from degraded mechanical properties due to the liquid-phase inclusions, thereby limiting their proliferation. Here, in this study, a low-melting-point alloy is utilized as the particulate inclusions of carbon fiber/epoxy laminated composites. Field's Metal particles (melting point: 62 °C) are distributed between woven carbon fiber preforms followed by the resin impregnation to realize laminated composites with a Field's Metal-enhanced interlayer(s). The resulting laminated composites demonstrate the autonomic repair of interlaminar failure with a 40 % of healing efficiency. Most of all, the mechanical properties of these self-healing laminated composites are comparable to the conventional laminated composites attributed to the rigid inclusions that can be compressed to increase the fiber volume. Since the Field's Metal particle inclusions can bestow polymer composites with self-healing ability and the potential increase in mechanical properties, Field's Metal-enhanced fiber-reinforced polymer composites are expected to unlock the practical utility of self-healing composites.

A. polymer-matrix composites (PMCs)↗

String flash-boiling in gasoline direct injection simulations with transient needle motion

A computational study was performed to investigate the influence of transient needle motion on gasoline direct injection (GDI) internal nozzle flow and near-field sprays. Simulations were conducted with a compressible Eulerian flow solver modeling liquid, vapor, and non-condensable gas phases with a diffuse interface. Variable rate generation and condensation of fuel vapor were captured using the homogeneous relaxation model (HRM). The non-flashing (spray G) and flashing (spray G2) conditions specified by the Engine Combustion Network were modeled using the nominal spray G nozzle geometry and transient needle lift and wobble were based upon ensemble averaged x-ray imaging preformed at Argonne National Lab. The minimum needle lift simulated was 5 μm and dynamic mesh motion was achieved with Laplacian smoothing. The results were qualitatively validated against experimental imaging and the experimental rate of injection profile was captured accurately using pressure boundary conditions and needle motion to actu- ate the injection. Needle wobble was found to have no measurable effect on the flow. Low needle lift is shown to result in vapor generation as fuel rushes past the needle. In conclusion, the internal injector flow is shown to contain many transient and interacting vortices which cause perturbations in the spray angle, fluctuations in the mass flux, and frequently result in string flash-boiling.

33 ADVANCED PROPULSION SYSTEMS↗

Microstructure evolution during near-net-shape fabrication of Ni x Al y -TiC cermets through binder jet additive manufacturing and pressureless melt infiltration

Titanium carbide-nickel aluminide (TiC-Ni x Al y ) intermetallic matrix composite materials were fabricated with additive manufacturing and pressureless melt infiltration for applications intended for high-wear and corrosive environments while maintaining low density. In this work, two compositions of nickel aluminide are infiltrated into porous, printed TiC preforms. Net shaping of a nickel-rich infiltrant is less compared to the net shaping of the aluminum-rich infiltrant due to dissolution of TiC in the molten infiltrant. The microstructures and porosity of the two infiltrants with TiC are examined after processing. The explanation of shape retention from infiltration is explained, and the excellent shape retention in an Al-rich infiltrant system is thought to be from peritectic behavior and a metered infiltration of different phases during cooling and solidification without significant dissolution. The metered infiltration contributed to some porosity, microcracking, and segregated Ni x Al y phases. We show that TiC can be shaped and infiltrated with intermetallics to provide a method of making composites with limited shrinkage and controlled geometry.

36 MATERIALS SCIENCE↗