Search NASA⌕ Search

SEARCH · Search NASA

Results for “target variability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Assessing the Key Requirements for 450 GW of Renewable Capacity in India by 2030

In this policy brief, we assess the prerequisites for India to achieve 450 GW of solar and wind cumulative installed capacity by 2030. We examine requirements such as availability of land, new transmission buildout, financing and pace of deployment, as well as the impact on grid reliability and cost of generation. We also examine the impact of policies promoting domestic manufacturing. Deploying 307 GW of solar and 142 GW of wind capacity would use only about 1.25% of land that is categorized as barren or waste, which is equivalent to about 0.22% of the total land area in India. Because of the good solar resource across large swaths of India, the solar energy buildout—and thus the land use—potentially can be spread out. India would need about 280 GW of new interstate transmission capacity by 2030, a little over double the transmission expansion that has already been planned through 2025. However, most of the new transmission buildout is driven by the near doubling of electricity demand between 2020 and 2030. The total investment needed (in generation and storage resources) to realize this target is around USD 26.5 billion annually, which is 20% lower than the annual investment in India’s power sector across all generation resources between 2015 and 2019. We estimate that using domestically manufactured panels instead of imported panels may increase solar PPA prices by about 10%–15% in the medium term, but solar power would still be a cost-effective way to meet growing demand instead of building new fossil fuel-based power plants, because the price of electricity from solar plants has fallen below the variable cost of most existing coal units. To reach this target, India would need to build about 35–40 GW of solar and wind capacity every year in this decade. India’s power sector achieved a pace of capacity addition of 22 GW per year in the previous decade (including thermal and renewable). Policy and regulatory measures would be needed to increase the pace of deployment.

14 SOLAR ENERGY↗

Soil organic carbon is not just for soil scientists: measurement recommendations for diverse practitioners

Soil organic carbon (SOC) regulates terrestrial ecosystem functioning, provides diverse energy sources for soil microorganisms, governs soil structure, and regulates the availability of organically bound nutrients. Investigators in increasingly diverse disciplines recognize how quantifying SOC attributes can provide insight about ecological states and processes. Today, multiple research networks collect and provide SOC data, and robust, new technologies are available for managing, sharing, and analyzing large data sets. Here, we advocate that the scientific community capitalize on these developments to augment SOC data sets via standardized protocols. We describe why such efforts are important and the breadth of disciplines for which it will be helpful, and outline a tiered approach for standardized sampling of SOC and ancillary variables that ranges from simple to more complex. We target scientists ranging from those with little to no background in soil science to those with more soil-related expertise, and offer examples of the ways in which the resulting data can be organized, shared, and discoverable.

54 ENVIRONMENTAL SCIENCES↗

Hydrogel Tethering Enhances Interdomain Stabilization of Single-Chain Antibodies

Self-assembly of recombinant proteins within the biosilica of living diatoms represents a means to construct functional materials in a reproducible and scalable manner that enable applications that harness the inherent specificities of proteins to sense and respond to environmental cues. Here we describe the use of a silaffin-derived lysine-rich 39 amino-acid targeting sequence (Sil3T8) to direct a single chain fragment variable (scFv) antibody or an enhanced green fluorescent protein (EGFP) to assemble within the biosilica frustule, resulting in abundances in excess of 200,000 proteins per frustule. The fluorescence of either a derivative of trinitrotoluene (TNT) bound to the scFv or the endogenous fluorescence of EGFP was used to monitor pro-tein conformational dynamics, accessibility to external quenchers, binding affinity, and conformational stability. We find that proteins within isolated frustules undergo isotropic rotational motions with two-fold increases in rotational correlation times, which are indicative of weak macromolecular associations within the biosilica. Solvent accessibilities and high-affinity (pM) binding are comparable to those in solution. In contrast to solution conditions, scFv antibod-ies within the biosilica matrix retain their binding affinity in the presence of chaotropic agents (i.e., 8 M urea). These results argue that dramatic increases in protein conforma-tional stability within the biosilica frustule matrices arise through molecular crowding, acting to retain native protein folds and associated functionality to allow the utility of engineered proteins under a range of harsh environmental conditions associated with environmental sensing and industrial catalytic transformations.

Biosilica↗

Simultaneous Process and Heat Exchanger Network Synthesis Using a Discrete Temperature Grid

We present mixed-integer linear programming models for utility targeting and heat exchanger network synthesis that account for variable stream temperatures and flow rates as well as unclassified streams and thus can be combined with process synthesis optimization models. By projecting temperature information onto a fixed discrete temperature grid, the model remains linear even under variable temperatures and flow rates, leading to a more tractable optimization model. The proposed model is well suited to address problems in the area of process intensification where the close interaction between different phenomena naturally leads to process synthesis problems with unclassified process streams. Several extensions are presented, including nonisothermal mixing as well as phase changes. Moreover, we show how a nonuniform grid can be adopted to reduce the complexity of the model for medium and large-size problems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly similar structural frames link the template tunnel and NTP entry tunnel to the exterior surface in RNA-dependent RNA polymerases

RNA-dependent RNA polymerase (RdRp) is essential to viral replication and is therefore one of the primary targets of countermeasures against these dangerous infectious agents. Development of broad-spectrum therapeutics targeting polymerases has been hampered by the extreme sequence variability of these sequences. RdRps range in length from 400–800 residues, yet contain only 20 residues that are conserved in most species. In this study, we made structure-based comparisons that are independent of sequence composition using a recently developed algorithm. We identified residue-to-residue correspondences of multiple protein structures and created (two-dimensional) structure-based alignment maps of 37 polymerase structures that provide both sequence and structure details. Using these maps, we determined that 75% of each polymerase species consists of seven protein segments, each of which has high structural similarity to segments in other species, though they are widely divergent in sequence composition and order. We define each of these segments as a ‘homomorph’, and each includes (though most are much larger than) the well-known conserved polymerase motifs. All homomorphs contact the template tunnel or nucleoside triphosphate (NTP) entry tunnel and the exterior of the protein, suggesting they constitute a structural and functional skeleton common among the polymerases.

59 BASIC BIOLOGICAL SCIENCES↗

Average formation length of hadrons in a string model

The space-time scales of the hadronization process in the framework of the string model are investigated. It is shown that the average formation lengths of pseudoscalar mesons, produced in semi-inclusive deep inelastic scattering of leptons on different targets, depend on their electrical charges. In particular, the average formation lengths of positively charged hadrons are larger than those of negatively charged ones. This statement is fulfilled for all scaling functions used, for z (the fraction of the virtual photon energy transferred to the detected hadron) larger than 0.15, for all nuclear targets, and for any value of the Bjoerken scaling variable x{sub Bj}. In all cases, the main mechanism is direct production of pseudoscalar mesons. Including in consideration an additional mechanism of production resulting in decay of resonances leads to a decrease in average formation lengths. It is shown that the average formation lengths of positively (negatively) charged mesons are slowly increasing (decreasing) functions of x{sub Bj}. The results obtained can be important, in particular, for understanding of the hadronization process in the nuclear environment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SU-F-R-11: Designing Quality and Safety Informatics Through Implementation of a CT Radiation Dose Monitoring Program

Purpose: Recent legislative and accreditation requirements have driven rapid development and implementation of CT radiation dose monitoring solutions. Institutions must determine how to improve quality, safety, and consistency of their clinical performance. The purpose of this work was to design a strategy and meaningful characterization of results from an in-house, clinically-deployed dose monitoring solution. Methods: A dose monitoring platform was designed by our imaging physics group that focused on extracting protocol parameters, dose metrics, and patient demographics and size. Compared to most commercial solutions, which focus on individual exam alerts and global thresholds, the program sought to characterize overall consistency and targeted thresholds based on eight analytic interrogations. Those were based on explicit questions related to protocol application, national benchmarks, protocol and size-specific dose targets, operational consistency, outliers, temporal trends, intra-system variability, and consistent use of electronic protocols. Using historical data since the start of 2013, 95% and 99% intervals were used to establish yellow and amber parameterized dose alert thresholds, respectively, as a function of protocol, scanner, and size. Results: Quarterly reports have been generated for three hospitals for 3 quarters of 2015 totaling 27880, 28502, 30631 exams, respectively. Four adult and two pediatric protocols were higher than external institutional benchmarks. Four protocol dose levels were being inconsistently applied as a function of patient size. For the three hospitals, the minimum and maximum amber outlier percentages were [1.53%,2.28%], [0.76%,1.8%], [0.94%,1.17%], respectively. Compared with the electronic protocols, 10 protocols were found to be used with some inconsistency. Conclusion: Dose monitoring can satisfy requirements with global alert thresholds and patient dose records, but the real value is in optimizing patient-specific protocols, balancing image quality trade-offs that dose-reduction strategies promise, and improving the performance and consistency of a clinical operation. Data plots that capture patient demographics and scanner performance demonstrate that value.

60 APPLIED LIFE SCIENCES↗

Broad betacoronavirus neutralization by a stem helix–specific human antibody

Targeting a range of betacoranaviruses In the past 20 years, three highly pathogenic β-coronaviruses have crossed from animals to humans, including the most recent: severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). A spike protein that decorates these viruses has an S1 domain that binds host cell receptors and an S2 domain that fuses the viral and cell membranes to allow cell entry. The S1 domain is the target of many neutralizing antibodies but is more genetically variable than S2, and antibodies can exert selective pressure, leading to resistant variants. Pinto et al . identified five monoclonal antibodies that interact with a helix in the S2 domain. The most broadly neutralizing antibody inhibited all β-coronavirus subgenera and reduced viral burden in hamsters infected with SARS-CoV-2. —VV

59 BASIC BIOLOGICAL SCIENCES↗

Improving the Reproducibility of the Radial Argon Concentration in Beryllium Shells

We used sputter coating of beryllium on spherical mandrels at Lawrence Livermore National Laboratory and at General Atomics to produce graded, copper doped beryllium shells. While these coatings have consistent microstructure and acceptable void content, different coaters produced different results with respect to argon implantation. Each individual system met the requirements for argon implantation, but the deviation from one system to another and from run to run exceeded the variability requirements as specified by the National Ignition Facility target design requirements. We redesigned the fixturing within one system to improve reproducibility. Furthermore, we reconfigured the coaters so that the vertical and lateral alignments of the shells under the gun varied <1 mm between systems. After this process, the systems were able to produce beryllium capsules with radial argon profiles that met specifications and were consistent from run to run and from system to system. During this process we gained insight into the beryllium coating process. Finally, the radial argon variation was shown to be dependent on sputter target thickness. We also found that the argon content in the shells was extremely dependent on the position of the shells with respect to the gun.

42 ENGINEERING↗

Calculations Document

Figure 1 shows a simplified model schematic of the Tetracage target design. In this figure the green lines represent the Tetracage yarns, which consist of two parallel yarns on the top and two parallel yarns on the bottom with the pairs in a cross hatched pattern. For simplicity, as we are only considering vertical forces, we will perform calculations without consideration for the two pairs of yarns being perpendicular to each other. Also worth noting is the model shows the yarns extending directly to the capsule then closely hugging it – in reality, the yarns behave as you would expect where they hug the capsule only as much as the geometry of their deflection allows, similarly to if you held a tennis ball with a pair of parallel strings anchored at opposing ends. The dashed black lines show the path the yarns take straight across from slot glue point to slot glue point before the target is closed and the capsule deforms them. The variable r corresponds to the capsule outer radius. The variable L corresponds to the hohlraum inner radius. The variable a corresponds to the yarn offset from the center of the diagnostic band. The variable d corresponds to the wire deflection vertically.

42 ENGINEERING↗

Calibration of the Nikon 200 for Close Range Photogrammetry

The overall objective of this project is to study the stability and reproducibility of the calibration parameters of the Nikon D200 camera with a Nikkor 20 mm lens for close-range photogrammetric surveys. The well known 'central perspective projection' model is used to determine the camera parameters for interior orientation. The Brown model extends it with the introduction of radial distortion and other less critical variables. The calibration process requires a dense network of targets to be photographed at different angles. For faster processing, reflective coded targets are chosen. Two scenarios have been used to check the reproducibility of the parameters. The first one is using a flat 2D wall with 141 coded targets and 12 custom targets that were previously measured with a laser tracker. The second one is a 3D Unistrut structure with a combination of coded targets and 3D reflective spheres. The study has shown that this setup is only stable during a short period of time. In conclusion, this camera is acceptable when calibrated before each use. Future work should include actual field tests and possible mechanical improvements, such as securing the lens to the camera body.

Sheriff, Lassana↗

ESMValTool (v1.0) – a community diagnostic and performance metrics tool for routine evaluation of Earth system models in CMIP

A community diagnostics and performance metrics tool for the evaluation of Earth system models (ESMs) has been developed that allows for routine comparison of single or multiple models, either against predecessor versions or against observations. The priority of the effort so far has been to target specific scientific themes focusing on selected essential climate variables (ECVs), a range of known systematic biases common to ESMs, such as coupled tropical climate variability, monsoons, Southern Ocean processes, continental dry biases, and soil hydrology–climate interactions, as well as atmospheric CO 2 budgets, tropospheric and stratospheric ozone, and tropospheric aerosols. The tool is being developed in such a way that additional analyses can easily be added. A set of standard namelists for each scientific topic reproduces specific sets of diagnostics or performance metrics that have demonstrated their importance in ESM evaluation in the peer-reviewed literature. The Earth System Model Evaluation Tool (ESMValTool) is a community effort open to both users and developers encouraging open exchange of diagnostic source code and evaluation results from the Coupled Model Intercomparison Project (CMIP) ensemble. This will facilitate and improve ESM evaluation beyond the state-of-the-art and aims at supporting such activities within CMIP and at individual modelling centres. Ultimately, we envisage running the ESMValTool alongside the Earth System Grid Federation (ESGF) as part of a more routine evaluation of CMIP model simulations while utilizing observations available in standard formats (obs4MIPs) or provided by the user.

58 GEOSCIENCES↗

Canopy spectral reflectance, Kougarok and Teller sites, Seward Peninsula, Alaska, 2016

Measurements of full-spectrum (350-2500 nm) canopy spectral reflectance of Arctic plant species at the Teller and Kougarok NGEE-Arctic sites, Seward Peninsula, Alaska. Spectra were collected in July 2016 using an SVC HR-2014i spectroradiometer together with a Spectralon white plate to calibrate each measurement under variable illumination conditions. The locations of the 43 measurement targets are provided as latitude and longitude recorded by the spectroradiometer internal GPS. This data package comprises .csv data and metadata files, and the SVC instrument output (.sig in .zip). The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Cratering and penetration experiments in teflon targets at velocities from 1 to 7 km/s

Approximately 20 sq m of protective thermal blankets, largely composed of Teflon, were retrieved from the Long Duration Exposure Facility after the spacecraft spent approximately 5.7 years in space. Examination of these blankets revealed that they contained thousands of hypervelocity impact features ranging from micron-sized craters to penetration holes several millimeters in diameter. We conducted impact experiments to reproduce such features and to understand the relationships between projectile size and the resulting crater or penetration hole diameter over a wide range of impact velocities. Such relationships are needed to derive the size and mass frequency distribution and flux of natural and man-made particles in low-earth orbit. Powder propellant and light-gas guns were used to launch soda-lime glass spheres into pure Teflon targets at velocities ranging from 1 to 7 km/s. Target thickness varied over more than three orders of magnitude from finite halfspace targets to very thin films. Cratering and penetration of massive Teflon targets is dominated by brittle failure and the development of extensive spall zones at the target's front and, if penetrated, the target's rear side. Mass removal by spallation at the back side of Teflon targets may be so severe that the absolute penetration hole diameter can become larger than that of a standard crater. The crater diameter in infinite halfspace Teflon targets increases, at otherwise constant impact conditions, with encounter velocity by a factor of V (exp 0.44). In contrast, the penetration hole size in very thin foils is essentially unaffected by impact velocity. Penetrations at target thicknesses intermediate to these extremes will scale with variable exponents of V. Our experimental matrix is sufficiently systematic and complete, up to 7 km/s, to make reasonable recommendations for velocity-scaling of Teflon craters and penetrations. We specifically suggest that cratering behavior and associated equations apply to all impacts in which the shock-pulse duration of the projectile is shorter than that assigned a unique projectile size, provided an impact velocity is known or assumed. This calibration seems superior to the traditional ballistic-limit approach.

Horz, Friedrich↗

Project trades model for complex space missions

A Project Trades Model (PTM) is a collection of tools/simulations linked together to rapidly perform integrated system trade studies of performance, cost, risk, and mission effectiveness. An operating PTM captures the interactions between various targeted systems and subsystems through an exchange of computed variables of the constituent models. Selection and implementation of the order, method of interaction, model type, and envisioned operation of the ensemble of tools rpresents the key system engineering challenge of the approach. This paper describes an approach to building a PTM and using it to perform top-level system trades for a complex space mission. In particular, the PTM discussed here is for a future Mars mission involving a large rover.

web services↗

Mineralogy of the Pahrump Hills Region, Gale Crater, Mars

The Pahrump Hills region of Gale crater is a approximately 12 millimeter thick section of sedimentary rocks in the Murray formation, interpreted as the basal geological unit of Mount Sharp. The Mars Science Laboratory, Curiosity, arrived at the Pahrump Hills in September, 2014, and performed a detailed six-month investigation of the sedimentary structures, geochemistry, and mineralogy of the area. During the campaign, Curiosity drilled and delivered three rock samples to its internal instruments, including the CheMin XRD/XRF. The three targets, Confidence Hills, Mojave 2, and Telegraph Peak, contain variable amounts of plagioclase, pyroxene, iron oxides, jarosite, phyllosilicates, and X-ray amorphous material. Hematite was predicted at the base of Mount Sharp from orbital visible/near-IR spectroscopy, and CheMin confirmed this detection. The presence of jarosite throughout Pahrump Hills suggests the sediments experienced acid-sulfate alteration, either in-situ or within the source region of the sediments. This acidic leaching environment is in stark contrast to the environment preserved within the Sheepbed mudstone on the plains of Gale crater. The minerals within Sheepbed, including Fe-saponite, indicate these sediments were deposited in a shallow lake with circumneutral pH that may have been habitable.

Rampe, E. B.↗

The Simulation and Subseasonal Forecasting of Hydrological Variables: Insights from a Simple Water Balance Model

Past work has shown that a land surface model’s (LSM’s) implicit (not explicitly coded) relationships between soil moisture and both evapotranspiration (ET) and runoff largely determine the LSM’s hydrological behavior. Here we estimate the relationships that appear to be operating in the real world and compare them to those of the LSM component of a state-of-the-art Earth system model (ESM). The two sets of relationships are determined by calibrating them within a simple water balance model (WBM): once using stream gauge observations from small, unregulated rivers over the eastern half of the U.S., and once using the runoffs generated by the LSM as part of a state-of-the-art atmospheric reanalysis. Hydrological simulations and subseasonal hydrological forecasts performed with the two calibrated versions of the WBM provide two key results. First, the version calibrated to the LSM-generated runoffs does successfully reproduce, to first order, the hydrological behavior of the full LSM within its ESM environment. Second, of the two WBM versions, the one calibrated to the observations reproduces more accurately a broad collection of fully independent streamflow observations as well as a similarly broad collection of in-situ soil moisture measurements. Taken together, the two results suggest that the observations-calibrated ET and runoff efficiency functions do successfully represent, at least to some degree, soil moisture controls over hydrological variability in Nature and can serve as potentially useful targets for further LSM development.

Water Balance Model↗

CMIP5 Scientific Gaps and Recommendations for CMIP6

The Coupled Model Intercomparison Project (CMIP) is an ongoing coordinated international activity of numerical experimentation of unprecedented scope and impact on climate science. Its most recent phase, the fifth phase (CMIP5), has created nearly 2 PB of output from dozens of experiments performed by dozens of comprehensive climate models available to the climate science research community. In so doing, it has greatly advanced climate science. While CMIP5 has given answers to important science questions, with the help of a community survey we identify and motivate three broad topics here that guided the scientific framework of the next phase of CMIP, that is, CMIP6: (1) How does the Earth system respond to changes in forcing? (2) What are the origins and consequences of systematic model biases? (3) How can we assess future climate changes given internal climate variability, predictability, and uncertainties in scenarios? CMIP has demonstrated the power of idealized experiments to better understand how the climate system works. We expect that these idealized approaches will continue to contribute to CMIP6. The quantification of radiative forcings and responses was poor, and thus it requires new methods and experiments to address this gap. There are a number of systematic model biases that appear in all phases of CMIP that remain a major climate modeling challenge. In conclusion, these biases need increased attention to better understand their origins and consequences through targeted experiments. Improving understanding of the mechanisms’ underlying internal climate variability for more skillful decadal climate predictions and long-term projections remains another challenge for CMIP6.

58 GEOSCIENCES↗