Search NASA⌕ Search

SEARCH · Search NASA

Results for “ANALOG PROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Magnetoelectric switching of perpendicular exchange bias in Pt/Co/α-Cr{sub 2}O{sub 3}/Pt stacked films

We report the realization of magnetoelectric switching of the perpendicular exchange bias in Pt/Co/α-Cr{sub 2}O{sub 3}/Pt stacked films. The perpendicular exchange bias was switched isothermally by the simultaneous application of magnetic and electric fields. The threshold electric field required to switch the perpendicular exchange bias was found to be inversely proportional to the magnetic field, which confirmed the magnetoelectric mechanism of the process. The observed temperature dependence of the threshold electric field suggested that the energy barrier of the antiferromagnetic spin reversal was significantly lower than that assuming the coherent rotation. Pulse voltage measurements indicated that the antiferromagnetic domain propagation dominates the switching process. These results suggest an analogy of the electric-field-induced magnetization with a simple ferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Binary and ternary recombination of D{sub 3}{sup +} ions with electrons in He-D{sub 2} plasma

An experimental study is reported about the recombination of D{sub 3}{sup +} ions with electrons in a low-temperature plasma (200-300 K) consisting of He with a small admixture of D{sub 2}. At several temperatures, the pressure dependence of the apparent binary recombination rate coefficient ({alpha}{sub eff}) was measured over a broad range of helium pressures (200-2000 Pa). The binary and ternary recombination rate coefficients were obtained from measured pressure dependences of {alpha}{sub eff}. The binary recombination rate coefficient obtained {alpha}{sub bin}(300 K)=(2.7{+-}0.9)x10{sup -8} cm{sup 3} s{sup -1} is in agreement with recent theory. The ternary recombination rate coefficient obtained is K{sub He}(300 K)=(1.8{+-}0.6)x10{sup -25} cm{sup 6} s{sup -1}. In analogy with the recently described process of helium-assisted ternary recombination of H{sub 3}{sup +} ions, it is suggested that the ternary helium-assisted recombination of D{sub 3}{sup +} ions proceeds through the formation of a neutral long-lived highly excited Rydberg molecule D{sub 3} followed by a collision with a He atom.

74 ATOMIC AND MOLECULAR PHYSICS↗

Kinetics of the Formation of a Disordered Crystal Structure during High-Speed Solidification

A phase–field description is given for the kinetic transition in the structure of a binary ordering crystal growing from a supercooled liquid. The results are interpreted on the basis of the solution of the phasefield dynamics equation and the relaxation equation for the long-range order parameter at the diffuse crystal–liquid interface and in the bulk of the crystal. The critical temperatures for the variation of the growth rate and the long-range order parameter of a growing A{sub 50}B{sub 50} crystal are determined. A qualitative difference and analogies are found between the processes of nonequilibrium impurity trapping and the formation of a disordered structure of rapidly growing crystals. The results of the study are analyzed in comparison with the results of the theory of kinetic phase transitions [A.A. Chernov, Sov. Phys. JETP 26, 1182 (1967)] and the experimental data on the high-speed solidification of congruently melting samples [H. Hartmann et al., Europhys. Lett. 87, 40007 (2009)].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic Diagnostics For Equilibrium Reconstruction And Realtime Plasma Control In NSTX-Upgrade

This paper describes aspects of magnetic diagnostics for realtime control in NSTX-U. The sensor arrangement on the upgraded center column is described. New analog and digital circuitry for processing the plasma current rogowski data are presented. An improved algorithm for estimating the plasma vertical velocity for feedback control is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-Excited, Multi-kHz Dynamics in a Linear, Semi-Bounded Detonation Channel

A linear, semi-bounded detonation channel was studied to characterize the injection, mixing, and ignition process in a two dimensional analog of a rotating detonation wave combustor (RDWC). The linear channel was developed to provide large optical accessibility in support of high-fidelity diagnostics. The canonical geometry was also chosen to support the generation of future numerical validation. A high degree of modularity was designed into the combustor to allow for testing multiple injector con figurations, and for reconfiguring the high-frequency instrumentation and optical window locations. Initial experiments have shown the presence of self-excited, multi-kHz combustion waves that bear the distinct characteristics of detonation waves. High-frequency pressure data details the dynamic response to detonation propagation in the combustor. The role of manifold-chamber coupling is investigated as the mechanism behind the formation of self-excited detonation waves in the combustor. We explore the formation of the waves using Schlieren imaging techniques and examine the structures present within the reaction zone and the interface between reactants and products. Companion computations were carried out using an in-house CFD solver GEMS(General Equations and Mesh Solver) to develop understanding of the structure and dynamics of the flow, flame, and their coupled interactions.

Schwinn, Kyle S.↗

Auxiliary circuit enables automatic monitoring of EKG'S

Auxiliary circuits allow direct, automatic monitoring of electrocardiograms by digital computers. One noiseless square-wave output signal for each trigger pulse from an electrocardiogram preamplifier is produced. The circuit also permits automatic processing of cardiovascular data from analog tapes.

Source record↗

Convective heating measurement by means of an infrared camera

The development of rapid and accurate wind tunnel techniques to measure convective heating distributions in complex reentry configurations is discussed. Major emphasis was put on the infrared camera technique. Its essence is the measurement of infrared emission from the surface of a wind tunnel model as a function of time. Prior calibration of the infrared camera relates the emission to the surface temperature of the model. The time history of the surface temperature can then be related to the heating rate by standard techniques. The output of the camera is an electrical signal that is tape-recorded in analog form, then digitized and processed by computer, so that automated and relatively rapid data reduction can be accomplished. In addition, the camera produces real-time visual displays of the infrared emission as pictures on an oscilloscope screen. These pictures give immediate indications of hot and cool spots on the model.

Compton, D. L.↗

Obtaining an electrical output from a mechanical flowmeter

Circuit using optical sensor, low power counting electronics, oneclip digital-to-analog converter and operational amplifier converts mechanical readout of water, gas, fuel-oil or power meter to analog signal suitable for online processings.

Powers, W. T.↗

Some disconnected speculations on slicing silicon

The basic principles for qualifying silicon wafering methods are summarized, and unconventional methods of wafering was discussed. Methods of cleaving analogous to diamond cutting, geological processes employing the expansion of freezing water, and karate chops are touched upon.

Iles, P. A.↗

Trimming an aircraft model for flight simulation

Real-time piloted aircraft simulations with digital computers have been performed at Ames Research Center (ARC) for over two decades. For the simulation of conventional aircraft models, the establishment of initial vehicle and control orientations at various operational flight regimes has been adequately handled by either analog techniques or simple inversion processes. However, exotic helicopter configurations have been introduced recently that require more sophisticated techniques because of their expanded degrees of freedom and environmental vibration levels. At ARC, these techniques are used for the backward solutions to real-time simulation models as required for the generation of trim points. These techniques are presented in this paper with examples from a blade-element helicopter simulation model.

Mcfarland, Richard E.↗

Automatic Detection Of Faults In Turbomachinery Bearings

System of analog and digital signal-processing equipment, computers, and programs detects faults in ball bearings in turbomachines. System operates in real time, extracting information from vibrations sensed by accelerometers, strain gauges, and/or acoustical sensors. Vibrations caused when pits in balls contact races, and pits in races contact balls.

Higbie, Nathan B.↗

Experiments In Characterizing Vibrations Of A Structure

Report discusses experiments conducted to test methods of identification of vibrational and coupled rotational/vibrational modes of flexible structure. Report one in series that chronicle development of integrated system of methods, sensors, actuators, analog and digital signal-processing equipment, and algorithms to suppress vibrations in large, flexible structure even when dynamics of structure partly unknown and/or changing. Two prior articles describing aspects of research, "Autonomous Frequency-Domain Indentification" (NPO-18099), and "Automated Characterization Of Vibrations Of A Structure" (NPO-18141).

Yam, Yeung↗

Massively parallel neurocomputing for aerospace applications

An innovative hybrid, analog-digital charge-domain technology, for the massively parallel VLSI implementation of certain large scale matrix-vector operations, has recently been introduced. It employs arrays of Charge Coupled/Charge Injection Device cells holding an analog matrix of charge, which process digital vectors in parallel by means of binary, non-destructive charge transfer operations. The impact of this technology on massively parallel processing is discussed. Fundamentally new classes of algorithms, specifically designed for this emerging technology, as applied to signal processing, are derived.

Fijany, Amir↗

Magnetofossils in Terrestrial Samples and Martian Meteorite ALH84001

Here we compare magnetite crystals produced by terrestrial magnetotactic bacteria strain MV-1 with a subpopulation of magnetites from ALH84001. We find both to be chemically and physically identical-specifically, both are single-domain, chemically pure, and exhibit an unusual crystal habit we describe as truncated hexa-octahedral. On Earth such truncated hexa-octahedral magnetites are only known to be produced by magnetotactic bacteria. We suggest that the observation of truncated hexa-octahedral magnetites in ALH84001 are both consistent with, and in the absence of terrestrial inorganic analogs, likely formed by biogenic processes. Additional information is contained in the original extended abstract.

ThomasKeptra, Kathie L.↗

"Smart" Sensor Module

An assembly that contains a sensor, sensor-signal-conditioning circuitry, a sensor-readout analog-to-digital converter (ADC), data-storage circuitry, and a microprocessor that runs special-purpose software and communicates with one or more external computer(s) has been developed as a prototype of "smart" sensor modules for monitoring the integrity and functionality (the "health") of engineering systems. Although these modules are now being designed specifically for use on rocket-engine test stands, it is anticipated that they could also readily be designed to be incorporated into health-monitoring subsystems of such diverse engineering systems as spacecraft, aircraft, land vehicles, bridges, buildings, power plants, oilrigs, and defense installations. The figure is a simplified block diagram of the "smart" sensor module. The analog sensor readout signal is processed by the ADC, the digital output of which is fed to the microprocessor. By means of a standard RS-232 cable, the microprocessor is connected to a local personal computer (PC), from which software is downloaded into a randomaccess memory in the microprocessor. The local PC is also used to debug the software. Once the software is running, the local PC is disconnected and the module is controlled by, and all output data from the module are collected by, a remote PC via an Ethernet bus. Several smart sensor modules like this one could be connected to the same Ethernet bus and controlled by the single remote PC. The software running in the microprocessor includes driver programs for operation of the sensor, programs that implement self-assessment algorithms, programs that implement protocols for communication with the external computer( s), and programs that implement evolutionary methodologies to enable the module to improve its performance over time. The design of the module and of the health-monitoring system of which it is a part reflects the understanding that the main purpose of a health-monitoring system is to detect damage and, therefore, the health-monitoring system must be able to function effectively in the presence of damage and should be capable of distinguishing between damage to itself and damage to the system being monitored. A major benefit afforded by the self-assessment algorithms is that in the output of the module, the sensor data indicative of the health of the engineering system being monitored are coupled with a confidence factor that quantifies the degree of reliability of the data. Hence, the output includes information on the health of the sensor module itself in addition to information on the health of the engineering system being monitored.

Mahajan, Ajay↗

Mars Science Laboratory Sample Acquisition, Sample Processing and Handling: Subsystem Design and Test Challenges

The Sample Acquisition/Sample Processing and Handling subsystem for the Mars Science Laboratory is a highly-mechanized, Rover-based sampling system that acquires powdered rock and regolith samples from the Martian surface, sorts the samples into fine particles through sieving, and delivers small portions of the powder into two science instruments inside the Rover. SA/SPaH utilizes 17 actuated degrees-of-freedom to perform the functions needed to produce 5 sample pathways in support of the scientific investigation on Mars. Both hardware redundancy and functional redundancy are employed in configuring this sampling system so some functionality is retained even with the loss of a degree-of-freedom. Intentional dynamic environments are created to move sample while vibration isolators attenuate this environment at the sensitive instruments located near the dynamic sources. In addition to the typical flight hardware qualification test program, two additional types of testing are essential for this kind of sampling system: characterization of the intentionally-created dynamic environment and testing of the sample acquisition and processing hardware functions using Mars analog materials in a low pressure environment. The overall subsystem design and configuration are discussed along with some of the challenges, tradeoffs, and lessons learned in the areas of fault tolerance, intentional dynamic environments, and special testing

Jandura, Louise↗

Distributed Motor Controller (DMC) for Operation in Extreme Environments

This paper presents an extreme environment capable Distributed Motor Controller (DMC) module suitable for operation with a distributed architecture of future spacecraft systems. This motor controller is designed to be a bus-based electronics module capable of operating a single Brushless DC motor in extreme space environments: temperature (-120 C to +85 C required, -180 C to +100 C stretch goal); radiation (>;20K required, >;100KRad stretch goal); >;360 cycles of operation. Achieving this objective will result in a scalable modular configuration for motor control with enhanced reliability that will greatly lower cost during the design, fabrication and ATLO phases of future missions. Within the heart of the DMC lies a pair of cold-capable Application Specific Integrated Circuits (ASICs) and a Field Programmable Gate Array (FPGA) that enable its miniaturization and operation in extreme environments. The ASICs are fabricated in the IBM 0.5 micron Silicon Germanium (SiGe) BiCMOS process and are comprised of Analog circuitry to provide telemetry information, sensor interface, and health and status of DMC. The FPGA contains logic to provide motor control, status monitoring and spacecraft interface. The testing and characterization of these ASICs have yielded excellent functionality in cold temperatures (-135 C). The DMC module has demonstrated successful operation of a motor at temperature.

SiGe↗