Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Residual turbulence from velocity shear stabilized interchange instabilities

The stabilizing effect of velocity shear on the macroscopic, broad bandwidth, ideal interchange instability is studied in linear and nonlinear regimes. A 2D dissipative magnetohydrodynamic (MHD) code is employed to simulate the system. For a given flow shear, V Prime , linear growth rates are shown to be suppressed to below the shear-free level at both the small and large wavelengths. With increasing V Prime , the unstable band in wavenumber-space shrinks so that the peak growth results for modes that correspond to relatively high wavenumbers, on the scale of the density gradient. In the nonlinear turbulent steady state, a similar turbulent spectrum obtains, and the convection cells are roughly circular. In addition, the density fluctuation level and the degree of flattening of the initial inverted density profile are found to decrease as V Prime increases; in fact, unstable modes are almost completely stabilized and the density profile reverts to laminar when V Prime is a few times the classic interchange growth rate. Moreover, the turbulent particle flux diminishes with increasing velocity shear such that all the flux is carried by the classical diffusive flux in the asymptotic limit. The simulations are compared with measurements of magnetic fluctuations from the Maryland Centrifugal Experiment, MCX, which investigated interchange modes in the presence of velocity shear. The experimental spectral data, taken in the plasma edge, are in general agreement with the numerical data obtained in higher viscosity simulations for which the level of viscosity is chosen consistent with MCX Reynolds numbers at the edge. In particular, the residual turbulence in both cases is dominated by elongated convection cells. Finally, concomitant Kelvin-Helmholtz instabilities in the system are also examined. Complete stability to interchanges is obtained only in the parameter space wherein the generalized Rayleigh inflexion theorem is satisfied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physical conditions in the cool parts of prominences and spicules - The effects of model atom level truncation on the derived plasma parameters

The effects on calculated lower-level population densities of the truncation of Na and Sr(+) model atoms are determined in the context of the present spectral diagnostic scheme for solar prominences and spicules. It is shown that neglect of the upper atomic levels in Na, in particular, leads to overestimates in electron density and gas pressure by factors of about 2 and about 4, respectively, and to underestimates in the degree of hydrogen ionization and in the line-of-sight thickness of emitting material again by factors of about 2 and about 4, respectively. The implications of the revised emitting region extents, in particular, on the validity of the diagnostic method for these features are discussed.

Landman, D. A.↗

Experimental characterization of a section of a spherically imploding plasma liner formed by merging hypersonic plasma jets

In this work, we report experimental results on merging of hypersonic plasma jets, which is the fundamental building block for forming spherically imploding plasma liners as a potential standoff compression driver for magneto-inertial fusion. Jets are formed and launched by contoured-gap coaxial plasma guns mounted at the six vertices and the center of a hexagon covering approximately one-tenth of the surface area of a 9-ft-diameter spherical chamber. First, from experiments with two and three merging jets of four different species (N, Ar, Kr, and Xe), we show that (1) density spatial non-uniformities can be large (with electron-density jumps ranging from 2.9 for N to 6.6 for Xe) when shocks form upon jet merging, but smaller (density jumps <2) when shocks do not form; (2) jet impurities (20% Ti in these experiments) can increase the level of density spatial non-uniformity by increasing the collisionality of jet merging, leading to shock formation rather than potentially more desirable shockless jet merging; and (3) the liner Mach number can remain high (≳10), as required for plasma liners to be an effective compression driver. Secondly, from experiments with six and seven merging jets using Ar, we present results with improved jet-to-jet mass balance of <2% across jets, including (1) evidence of substantially increased balance in the jet merging and symmetry of the liner structure and (2) potentially favorable changes in the jet-merging morphology with the addition of the seventh jet. Ultimately, for both experiments, we present comparisons between experimental and synthetic data from three-dimensional hydrodynamic codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predicting Mössbauer Parameters of Nonheme Diiron Complexes with Density Functional Theory

Mössbauer spectroscopy provides significant insights into the electronic structure and environment of the metal centers. In this work, we investigate the electronic structures of a set of nonheme diiron complexes by evaluating two key parameters pertaining to Mössbauer spectroscopy, namely, the isomer shift (δ) and quadrupole splitting (|ΔE Q |), using different levels of density functional theory (DFT). The diiron systems investigated here span diverse oxidation states, bridging motifs, and spin coupling patterns, which present a challenging case for theoretical predictions. We demonstrate that the combination of B97-D3/def2-TZVP is an efficient approach in modeling both the δ and |ΔEQ| values with high accuracy for the representative nonheme diiron complexes. We also show that δ is accurately predicted irrespective of the choice of approximate density functional while the |ΔE Q | is sensitive to the level of theory employed. Further investigation shows that the present methodology assessed using synthetic nonheme diiron complexes could be extended to nonheme diiron enzyme active sites, featuring both ferromagnetic and antiferromagnetic coupling between the iron centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

State densities of heavy nuclei in the static-path plus random-phase approximation

We report that nuclear state densities are important inputs to statistical models of compound-nucleus reactions. State densities are often calculated with self-consistent mean-field approximations that do not include important correlations and must be augmented with empirical collective enhancement factors. Here, we benchmark the static-path plus random-phase approximation (SPA + RPA) to the state density in a chain of samarium isotopes 148–155 Sm against exact results (up to statistical errors) obtained with the shell-model Monte Carlo (SMMC) method. The SPA + RPA method incorporates all static fluctuations beyond the mean field together with small-amplitude quantal fluctuations around each static fluctuation. Using a pairing plus quadrupole interaction, we show that the SPA + RPA state densities agree well with the exact SMMC densities for both the even- and odd-mass isotopes. For the even-mass isotopes, we also compare our results with mean-field state densities calculated with the finite-temperature Hartree-Fock-Bogoliubov (HFB) approximation. We find that the SPA + RPA repairs the deficiencies of the mean-field approximation associated with broken rotational symmetry in deformed nuclei and with the violation of particle-number conservation in the pairing condensate. In particular, in deformed nuclei the SPA + RPA reproduces the rotational enhancement of the state density relative to the mean-field state density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combining Pseudopotential and All Electron Density Functional Theory for the Efficient Calculation of Core Spectra Using a Multiresolution Approach

Broadly speaking, the calculation of core spectra such as electron energy loss spectra (EELS) at the level of density functional theory (DFT) usually relies on one of two approaches: conceptually more complex but computationally efficient projector augmented wave based approaches or more straightforward but computationally more intensive all electron (AE) based approaches. In this work we present an alternative method, which aims to find a middle ground between the two. Specifically, we have implemented an approach in the multiwavelet MADNESS molecular DFT code that permits a combination of atoms treated at the AE and pseudopotential (PSP) level. Atoms for which one wishes to calculate the core edges are thus treated at an AE level, while the remainder can be treated at the PSP level. This is made possible thanks to the multiresolution approach of MADNESS, which permits accurate and efficient calculations at both the AE and PSP level. Through examples of a small molecule and a carbon nanotube, this study demonstrates the potential applications of our approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure calculations of PbS quantum rods and tubes

We study absorption spectra, optical and HOMO-LUMO gaps, and the density of states for PbS quantum rods (QRs) and tubes (QTs). We find some similarities and also differences in QR and QT properties. For both QRs and QTs, the optical and HOMO-LUMO gaps reach the plateaus for small lengths. We find that tubes are as stable as rods. The optical spectra exhibit a peak that can be due to the electron-hole interaction or be a prototype of an S{sub e}–S{sub h} transition in the effective mass approximation. We also calculate the density of states by the density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods. The TDDFT density of states function is shifted towards the red side by 0.5 eV indicating the strong e-h interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, elastic, electronic and phonon properties of SnX{sub 2}O{sub 4} (X=Mg, Zn, Cd) spinel from density functional theory

First-principle calculations of structural, electronic, elastic and phonon properties of SnMg{sub 2}O{sub 4}, SnZn{sub 2}O{sub 4} and SnCd{sub 2}O{sub 4} compounds are presented, using the pseudo-potential plane waves approach based on density functional theory (DFT) within the generalized gradient approximation (GGA). The computed ground state structural parameters, i.e. lattice constants, internal free parameter and bulk modulus are in good agreement with the available theoretical results. Our calculated elastic constants are indicative of stability of SnX{sub 2}O{sub 4} (X=Mg, Zn, Cd) compounds in the spinel structure. The partial density of states (PDOS) of these compounds is in good agreement with the earlier ab-initio calculations. The phonon dispersion relations were calculated using the direct method. Phonon dispersion results indicate that SnZn{sub 2}O{sub 4} is dynamically stable, while SnMg{sub 2}O{sub 4} and SnCd{sub 2}O{sub 4} are unstable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Recognition and characterization of hierarchical interstellar structure. II - Structure tree statistics

A new method of image analysis is described, in which images partitioned into 'clouds' are represented by simplified skeleton images, called structure trees, that preserve the spatial relations of the component clouds while disregarding information concerning their sizes and shapes. The method can be used to discriminate between images of projected hierarchical (multiply nested) and random three-dimensional simulated collections of clouds constructed on the basis of observed interstellar properties, and even intermediate systems formed by combining random and hierarchical simulations. For a given structure type, the method can distinguish between different subclasses of models with different parameters and reliably estimate their hierarchical parameters: average number of children per parent, scale reduction factor per level of hierarchy, density contrast, and number of resolved levels. An application to a column density image of the Taurus complex constructed from IRAS data is given. Moderately strong evidence for a hierarchical structural component is found, and parameters of the hierarchy, as well as the average volume filling factor and mass efficiency of fragmentation per level of hierarchy, are estimated. The existence of nested structure contradicts models in which large molecular clouds are supposed to fragment, in a single stage, into roughly stellar-mass cores.

Houlahan, Padraig↗

Advanced PGM-free Cathode Engineering for High Power Density and Durability

Polymer electrolyte fuel cells (PEFCs) are among the most promising technologies for future electric vehicles by using clean H2 with much-improved energy conversion efficiency, longer range, and rapid refueling. However, due to a large amount of platinum group metal (PGM) catalyst used in their electrodes, their prohibitively high cost hinders broad commercialization of PEFCs for transportation. Therefore, there is a critical need to develop low-cost, high-performance PGM-free cathode catalysts that have the potential to dramatically transform the economics of PEFC commercialization by reducing catalyst costs by one to two orders of magnitude. However, before PGM-free cathodes become viable, several technical challenges associated with PGM-free cathodes must be addressed, including insufficient activity and stability of the catalysts, as well as severe water flooding and large transport losses in the electrodes. Overcoming those barriers and ultimately meeting the challenging automotive PEFC performance targets was the focus of this comprehensive research and development effort on new PGM-free cathodes. To this end, we assembled a team including leading researchers from universities and industry with different but complementary expertise and capabilities. The project combined three novel and promising approaches: Advanced metal-organic framework (MOF)-derived M-N-C catalysts with a high activity and impressive durability, Novel PGM-free specific cathode architectures and fabrication strategies capable of addressing the substantial flooding and transport resistances in thicker cathodes by introducing engineered hydrophobicity through additives and support layers, and Advanced electrode ionomers with high proton conductivity for low ohmic losses across the electrode and more uniform catalyst utilization. The implementation of these new materials and electrode designs was supported by a suite of advanced experimental and simulation tools that allows us to identify performance and durability bottlenecks, devise solutions, and establish rational material design and synthesis targets. These methods include advanced electrochemical characterization, high-resolution imaging, and multi-scale modeling. In addition, the project team leveraged a broad cross-section of the ElectroCat consortium’s national laboratory facilities and expertise in advancing these materials and design strategies. Finally, the industry partners on the project facilitated the evaluation of scaled-up synthesis and manufacturing in the United States. Over its four-year period, the project made significant year-over-year advances in PGM-free cathode performance and viability. A combination of high activity and highly durable catalysts were developed through novel catalyst synthesis strategies, which met several performance and durability targets. More specifically, a catalyst prepared from MOFs and Fe2O3 nanoparticles with ammonium chloride and chemical vapor deposition treatments yielded a significant advancement in PGM-free cathode durability. Several novel strategies for fabricating cathodes were demonstrated, including those designed to reduce flooding and thickness of the cells for significantly increased volumetric power density. An optimized cathode with high conductivity ionomer and tuned ink processing for hydrophobicity yielded high fuel cell performance with new levels power density and maximum current. The scientific studies and modeling assessment also provided an outlook for future efforts, including a focus on catalysts with an increased density of the highly stable active sites developed in this project.

08 HYDROGEN↗

Computational Fermi Level Engineering and Doping-Type Conversion of Ga2O3 Via Three-Step Processing

Ga2O3 is being actively explored for power electronics, and other applications due to its ultra- wide bandgap and low projected fabrication cost of high-quality crystals. N-type doping of Ga2O3 can be achieved and tuned, but p-type doping faces fundamental obstacles. Successful engineering of Ga2O3 based devices requires critical control of doping density, Fermi level position, providing opportunities for predictive process simulation. We use first-principles defect equilibrium calculations to simulate a 3-step growth- annealing-quench protocol for hydrogen assisted Mg doping in Ga2O3, taking into account the hydrogen- oxygen-water gas phase equilibrium. We predict type conversion to a net p-type regime following O-rich annealing after growth under reducing conditions in the presence of H2. We show that there is an optimal temperature that maximizes the net acceptor density during the equilibrium annealing step for a given Mg doping level. Quenching of non-equilibrium annealed samples then results in a Fermi level EF below mid-gap down to about EV +1.5 eV, creating a significant number of uncompensated neutral MgGa0 acceptors. This type converted Ga2O3 can create significant built-in field in a p-n junction with an adjoining n-type material and could enable vertical MOSFETs.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,M↗

Superfluid density of states and pseudogap phenomenon in the BCS-BEC crossover regime of a superfluid Fermi gas

We investigate single-particle excitations and strong-coupling effects in the BCS-BEC crossover regime of a superfluid Fermi gas. Including phase and amplitude fluctuations of the superfluid order parameter within a T-matrix theory, we calculate the superfluid density of states (DOS), as well as single-particle spectral weight, over the entire BCS-BEC crossover region below the superfluid transition temperature T{sub c}. We clarify how the pseudogap in the normal state evolves into the superfluid gap, as one passes through T{sub c}. While the pseudogap in DOS continuously evolves into the superfluid gap in the weak-coupling BCS regime, the superfluid gap in the crossover region is shown to appear in DOS after the pseudogap disappears below T{sub c}. In the phase diagram with respect to the temperature and interaction strength, we determine the region where strong pairing fluctuations dominate over single-particle properties of the system. Our results would be useful for the study of strong-coupling phenomena in the BCS-BEC crossover regime of a superfluid Fermi gas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Results for aliovalent doping of CeBr{sub 3} with Ca{sup 2+}

Despite the outstanding scintillation performance characteristics of cerium tribromide (CeBr{sub 3}) and cerium-activated lanthanum tribromide, their commercial availability and application are limited due to the difficulties of growing large, crack-free single crystals from these fragile materials. This investigation employed aliovalent doping to increase crystal strength while maintaining the optical properties of the crystal. One divalent dopant (Ca{sup 2+}) was used as a dopant to strengthen CeBr{sub 3} without negatively impacting scintillation performance. Ingots containing nominal concentrations of 1.9% of the Ca{sup 2+} dopant were grown, i.e., 1.9% of the CeBr{sub 3} molecules were replaced by CaBr{sub 2} molecules, to match our target replacement of 1 out of 54 cerium atoms be replaced by a calcium atom. Precisely the mixture was composed of 2.26 g of CaBr{sub 2} added to 222.14 g of CeBr{sub 3}. Preliminary scintillation measurements are presented for this aliovalently doped scintillator. Ca{sup 2+}-doped CeBr{sub 3} exhibited little or no change in the peak fluorescence emission for 371 nm optical excitation for CeBr{sub 3}. The structural, electronic, and optical properties of CeBr{sub 3} crystals were studied using the density functional theory within the generalized gradient approximation. Calculated lattice parameters are in agreement with the experimental data. The energy band structures and density of states were obtained. The optical properties of CeBr{sub 3}, including the dielectric function, were calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ensemble v-representable ab initio density-functional calculation of energy and spin in atoms: A test of exchange-correlation approximations

The total energies and the spin states for atoms and their first ions with Z=1-86 are calculated within the the local spin-density approximation (LSDA) and the generalized-gradient approximation (GGA) to the exchange-correlation (xc) energy in density-functional theory. Atoms and ions for which the ground-state density is not pure-state v-representable are treated as ensemble v-representable with fractional occupations of the Kohn-Sham system. A recently developed algorithm which searches over ensemble v-representable densities [E. Kraisler et al., Phys. Rev. A 80, 032115 (2009)] is employed in calculations. It is found that for many atoms, the ionization energies obtained with the GGA are only modestly improved with respect to experimental data, as compared to the LSDA. However, even in those groups of atoms where the improvement is systematic, there remains a non-negligible difference with respect to the experiment. The ab initio electronic configuration in the Kohn-Sham reference system does not always equal the configuration obtained from the spectroscopic term within the independent-electron approximation. It was shown that use of the latter configuration can prevent the energy-minimization process from converging to the global minimum, e.g., in lanthanides. The spin values calculated ab initio fit the experiment for most atoms and are almost unaffected by the choice of the xc functional. Among the systems with incorrectly obtained spin, there exist some cases (e.g., V, Pt) for which the result is found to be stable with respect to small variations in the xc approximation. These findings suggest a necessity for a significant modification of the exchange-correlation functional, probably of a nonlocal nature, to accurately describe such systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

On the calculation of atomic term populations

The usefulness of calculations on model atomic term systems which can give spectral multiplet intensities is emphasized, in contrast to more detailed level calculations which are not always feasible because of lack of appropriate atomic data. A more general expression for the multiplet radiative transition rate is proposed to facilitate term representations. The differences between term and level representations are discussed quantitatively with respect to a model three-level atom and real examples of the C III and Ne IV ions. It is shown that term representations fail at lower densities when level inverse lifetimes within terms differ by only a few orders of magnitude. In such cases one must resort to other methods; a hybrid calculation is therefore proposed to fill this need and is carried out for the C III ion to demonstrate its feasibility and validity.

Kastner, S. O.↗

Engineering the surface of LiCoO 2 electrodes using atomic layer deposition for stable high-voltage lithium ion batteries

Here, developing advanced technologies to stabilize positive electrodes of lithium ion batteries under high-voltage operation is becoming increasingly important, owing to the potential to achieve substantially enhanced energy density for applications such as portable electronics and electrical vehicles. Here, we deposited chemically inert and ionically conductive LiAlO 2 interfacial layers on LiCoO 2 electrodes using the atomic layer deposition technique. During prolonged cycling at high-voltage, the LiAlO 2 coating not only prevented interfacial reactions between the LiCoO 2 electrode and electrolyte, as confirmed by electrochemical impedance spectroscopy and Raman characterizations, but also allowed lithium ions to freely diffuse into LiCoO 2 without sacrificing the power density. As a result, a capacity value close to 200 mA·h·g –1 was achieved for the LiCoO 2 electrodes with commercial level loading densities, cycled at the cut-off potential of 4.6 V vs. Li + /Li for 50 stable cycles; this represents a 40% capacity gain, compared with the values obtained for commercial samples cycled at the cut-off potential of 4.2 V vs. Li + /Li.

25 ENERGY STORAGE↗

Scale-selective turbulence reduction in H-mode plasmas in the TJ-II stellarator

Wavenumber spectra of density turbulence in L- and H-mode plasmas have been measured in the TJ-II stellarator by means of Doppler reflectometry. A pronounced suppression of the density fluctuation level is observed in H-mode close to the radial position of maximum radial electric field (E{sub r}) shear. Furthermore, intermediate scale density turbulence is reduced preferentially. This effect can be interpreted within the framework of vortex stretching feeding energy through Reynolds stress into zonal flows, while shear decorrelation of turbulent structures might not play a central role in TJ-II. Moreover, it is shown that in both L- and H-mode, the phase velocity of density fluctuations does not depend on the structure scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Comparative Ab Initio Study of the Primary Hydration and Proton Dissociation of Various Imide and Sulfonic Acid Ionomers

We compare the role of neighboring group substitutions on proton dissociation of hydrated acidic moieties suitable for proton exchange membranes through electronic structure calculations. Three pairs of ionomers containing similar electron withdrawing groups within the pair were chosen for the study: two fully fluorinated sulfonyl imides (CF3SO2NHSO2CF3 and CF3CF2SO2NHSO2CF3), two partially fluorinated sulfonyl imides (CH3SO2NHSO2CF3 and C6H5SO2NHSO2CF2CF3), and two aromatic sulfonic acid based material s (CH3C6H4SO3H and CH3 OC6 - H3OCH3C6H4SO3H). Fully optimized counterpoise (CP) corrected geometries were obtained for each ionomer fragment with the inclusion of water molecules at the B3LYP/6-311G** level of density functional theory. Spontaneous proton dissociation was observed upon addition of three water molecules in each system, and the transition to a solvent-separated ion pair occurred when four water molecules were introduced. No considerable quantitative or qualitative differences in proton dissociation, hydrogen bond networks formed, or water binding energies were found between systems containing similar electron withdrawing groups. Each of the sulfonyl imide ionomers exhibited qualitatively similar results regarding proton dissociation and separation. The fully fluorinated sulfonyl imides, however, showed a greater propensity to exist in dissociated and ion-pair separated states at low degrees of hydration than the partially fluorinated sulfonyl imides. This effect is due to the additional electron withdrawing groups providing charge stabilization as the dissociated proton migrates away from the imide anion.

30 DIRECT ENERGY CONVERSION↗