Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA RADIAL PROFILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

The motional Stark effect diagnostic for ITER

An overview of the plans for the motional Stark effect (MSE) diagnostic installation on the International Thermonuclear Experimental Reactor (ITER) is presented. The MSE diagnostic uniquely provides spatially localized magnetic field measurements inside the plasma. These are used to constrain equilibrium reconstructions to determine q(r), the safety factor as a function of minor radius. Meeting the system requirements to deliver q-profiles and related quantities with the specified radial resolution of 20 points over the minor radius, 10 ms time resolution, and better than 10% accuracy is challenging. MSE systems observe the D/H-α emission near 656.3 nm from neutral beams. As the beam atoms traverse the magnetic field, B⃗, at high velocity, v⃗, they experience a Lorentz electric field, v⃗×B⃗, which causes the spectral emission to be split and polarized due to the Stark effect. Traditional MSE-LP (line polarization) measurements determine the direction of the magnetic field in the observation volume using polarimetric analysis of the detected light. The harsh conditions of ITER are expected to deposit thin films of contaminants on the first mirror, which would alter the polarization state of reflected light significantly. On ITER, the combination of high magnetic field strength and high energy beams makes the Stark spectrum resolution suitable for the determination of the magnetic field magnitude from the line shift, so this approach has been selected. Every aspect of the measurement system must be planned for the burning plasma environment and carefully analyzed ahead of time. Current status and plans for the system are presented.

Instruments & Instrumentation↗

Finite-difference multiple fluid solution for source-driven rotation in highly magnetized linear plasma device

The rotation profile of a magnetized plasma cylinder composed of multiple fluids is investigated analytically, expanding on previous results. The analytic steady-state solution is used as a benchmark for a time-dependent multiple-fluid finite-difference code, MITNS: Multiple-Ion Transport Numerical Solver. Magnetic field evolution is taken into account, both analytically and numerically. Its details are shown to be of importance when particles are allowed out of the domain. MITNS reproduces the asymptotic expansion results for a small parameter $δ<<<1$. For $\sqrt{m_elm_i} ~ δ << 1$ , a slightly different regime, dominated by viscosity-induced transport of ions, is found numerically and analytically. Finally, this verification supports the use of this code for more complex time-dependent calculations in the future. Additionally, we derive the angular velocity profile of each species due to radial particle and charge fluxes of various strengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bohm-criterion approximation versus optimal matched solution for a cylindrical probe in radial-motion theory

The theory of positive-ion collection by a probe immersed in a low-pressure plasma was reviewed and extended by Allen et al. [Proc. Phys. Soc. 70, 297 (1957)]. The numerical computations for cylindrical and spherical probes in a sheath region were presented by F. F. Chen [J. Nucl. Energy C 7, 41 (1965)]. Here, in this paper, the sheath and presheath solutions for a cylindrical probe are matched through a numerical matching procedure to yield “matched” potential profile or “M solution.” The solution based on the Bohm criterion approach “B solution” is discussed for this particular problem. The comparison of cylindrical probe characteristics obtained from the correct potential profile (M solution) and the approximated Bohm-criterion approach are different. This raises questions about the correctness of cylindrical probe theories relying only on the Bohm-criterion approach. Also the comparison between theoretical and experimental ion current characteristics shows that in an argon plasma the ions motion towards the probe is almost radial.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of triggering and evolution of ELM by pellet injection in EAST under BOUT++ framework

A BOUT ++ three-field magnetohydrodynamic model is employed to study the triggering and evolution of edge localized mode (ELM) by Li pellets injected along the outer mid-plane in the EAST configuration. The linear simulation shows that compared with a large deposition on the pedestal top (scenario I), a smaller deposition within the steep-gradient pedestal region (scenario II) can stimulate much larger linear growth rates of all-n peeling-ballooning modes (PBMs). The nonlinear simulation shows that there exists a pellet size threshold for ELM triggering for two deposition locations; the threshold for scenario I predicted in the present study matches the EAST observation well. Comparison of the two scenarios reveals that a smaller deposition is sufficient to trigger an ELM in a much shorter time in scenario II, whose ELM size is comparable to that in scenario I. This conclusion confirms previous DIII-D and ASDEX-Upgrade observations, suggesting that the steep-gradient pedestal region is a favorable deposition location for ELM triggering with minimum pellet size. Simulation analyses also find that the positive radial gradient of the hump-like pressure profile in the outer mid-plane induced by the pellet deposition plays a different role in the two scenarios. In scenario I, the force resulting from the gradient hinders the outflow of core plasmas and in return, the perturbation is suppressed from spreading inwards after ELM crashes. In scenario II, with a sizable deposition, the gradient results in another competitive perturbation growth region during the linear phase, thus dispersing the free energy and reducing the efficiency of destabilizing PBMs by pellet injection. The suppressing effect of saturated zonal flow on other modes, the short ELM fast crash phase, and the restricting transport effect of the positive radial pressure gradient work together to constrain the pedestal energy loss, especially when the pellet deposition amount is high.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluid and gyrokinetic turbulence in open field-line, helical plasmas

Two-fluid Braginskii codes have simulated open-field line turbulence for over a decade, and only recently, it has become possible to study these systems with continuum gyrokinetic codes. This work presents a first-of-its-kind comparison between fluid and (long-wavelength) gyrokinetic models in open field-lines, using the GDB and Gkeyll codes to simulate interchange turbulence in the Helimak device at the University of Texas [T. N. Bernard et al., Phys. Plasmas 26, 042301 (2019)]. Partial agreement is attained in a number of diagnostic channels when the GDB sources and sheath boundary conditions (BCs) are selected carefully, especially the heat-flux BCs that can drastically alter the temperature. The radial profile of the fluctuation levels is qualitatively similar and quantitatively comparable on the low-field side, although statistics such as moments of the probability density function and the high-frequency spectrum show greater differences. This comparison indicates areas for future improvement in both simulations, such as sheath BCs, and improvements in GDB like particle conservation and spatially varying thermal conductivity, in order to achieve better fluid-gyrokinetic agreement and increase fidelity when simulating experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of weakly damped modes using high resolution measurement of turbulence in a dipole confined plasma

When plasma is confined by a levitated superconducting current ring, the turbulent radial particle flux changes the direction depending upon the gradient of the particle number within tubes of equal magnetic flux [Garnier et al., Phys. Plasmas 24, 012506 (2017)]. When the density profile is highly peaked, the particle flux is outward. When the density profile is less peaked, turbulence drives an inward “particle pinch.” This change in the direction of particle flux coincides with a reversal of the mean toroidal propagation direction of turbulent fluctuations. Previously, only the mean wavenumber of the fluctuations was reported. The mean wavenumber was computed from the ensemble correlation between two probes. Here, the full frequency-wavenumber power spectrum of the saturated turbulence is calculated by applying Capon’s “maximum likelihood method” to floating potential measurements from an array of probes. The power spectrum shows that the highest intensity modes are due to unstable entropy modes, and the less intense modes coincide with weakly damped convective cells, which rotate toroidally in the direction opposite to the unstable modes. Because the weakly damped modes make up a significant fraction of the fluctuating power, these measurements imply that saturated turbulence in a dipole-confined plasma involves the excitation of weakly damped rotating convective cells.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of the radial electric field from a modified Ohm's law

A modified Ohm's Law, derived from the conservation of deuterium and carbon ions and electron momentum and the requirement for charge neutrality, yields an expression for the radial electric field, E r , in the edge pedestal region in terms of the motional electric field due to the carbon and deuterium ion rotation velocities as well as pressure gradients and the radial plasma current. This analytical Ohm's Law model for E r is first shown to be consistent with the conventional "experimental" electric field calculated from the carbon radial momentum balance using experimental carbon rotation and pressure gradient measurements when experimental profiles are used to evaluate the Ohm's Law in three DIII-D [Luxon, Nucl. Fusion 42, 614 (2002)] representative discharges (for L-mode, H-mode, and Resonant Magnetic Perturbation operating regimes). In order to test the practical predictive ability of the modified Ohm's Law, the calculations were repeated using rotation velocities calculated with neoclassical rotation models instead of measured rotation velocities. The Ohm's Law predicted E r using theoretical rotation velocities did not agree with the "experimental" E r as well as the Ohm's Law prediction using experimental rotation velocities, indicating that more accurate models for predicting edge rotation velocity are thus needed in order to have a validated predictive model of E r in the plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Intrinsic rotation produced by ion orbit loss and X-loss

A practical calculation model for the intrinsic rotation imparted to the edge plasma by the directionally preferential loss of ions on orbits that cross the last closed flux surface is presented and applied to calculate intrinsic rotation in several DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)] discharges. The intrinsic rotation produced by ion loss is found to be sensitive to the edge temperature and radial electric field profiles, which has implications for driving intrinsic rotation in future large tokamaks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of gas-puff Z-pinches on COBRA

Gas-puff Z-pinch experiments were conducted on the 1 MA, 200 ns pulse duration Cornell Beam Research Accelerator (COBRA) pulsed power generator in order to achieve an understanding of the dynamics and instability development in the imploding and stagnating plasma. The triple-nozzle gas-puff valve, pre-ionizer, and load hardware are described. Specific diagnostics for the gas-puff experiments, including a Planar Laser Induced Fluorescence system for measuring the radial neutral density profiles along with a Laser Shearing Interferometer and Laser Wavefront Analyzer for electron density measurements, are also described. The results of a series of experiments using two annular argon (Ar) and/or neon (Ne) gas shells (puff-on-puff) with or without an on- (or near-) axis wire are presented. For all of these experiments, plenum pressures were adjusted to hold the radial mass density profile as similar as possible. Initial implosion stability studies were performed using various combinations of the heavier (Ar) and lighter (Ne) gasses. Implosions with Ne in the outer shell and Ar in the inner were more stable than the opposite arrangement. Current waveforms can be adjusted on COBRA and it was found that the particular shape of the 200 ns current pulse affected on the duration and diameter of the stagnated pinched column and the x-ray yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Driving toroidally asymmetric current through the tokamak scrape-off layer. I. Potential for edge localized mode suppression

A potential technique for suppressing edge localized modes is theoretically analyzed. Recent experiments have shown that externally generated resonant magnetic perturbations (RMPs) can stabilize edge localized modes (ELMs) by modifying the density profile [T. E. Evans et al., Nat. Phys. 2, 419 (2006); Y. Liang et al., Phys. Rev. Lett. 98, 265004 (2007)]. Driving toroidally asymmetric current internally through the scrape-off layer (SOL) plasma itself can also generate RMPs that are close to the required threshold for ELM control. Ion saturation current densities can be achieved by producing potential differences on the order of the electron temperature. Although the threshold is uncertain in future devices, if driven coherently through the SOL, the upper limit for the resulting perturbation field would exceed the present experimental threshold. This analysis provides the tools required for estimating the magnitude of the coherent SOL current and RMP generated via toroidally asymmetric biasing of the target. Flux expansion increases the perturbation near the X-point, while phase interference due to the shearing of field lines near the X-point reduces the amplitude of the effective SOL perturbation and makes the result sensitive to both toroidal mode number n and the phasing at the target plate. If the current density driven at the target plate decays radially, the amplitude over the useful coherence width of the current profile will be reduced. The RMP can still exceed the present threshold at low n if the radial location and width of the biasing region are optimally chosen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental observation of the transition from nonlocal to local electron kinetics in inductively coupled plasmas

The transition from nonlocal to local kinetics was observed through the spatially resolved measurements of electron energy distribution functions in inductively coupled plasmas. As gas pressures increase, the spatial profiles of the effective electron temperatures (T{sub eff}) from the electron energy distribution functions changed dramatically from hollow shapes to flat shapes. With further increases in gas pressures, the T{sub eff} had saddle-shaped profiles with the highest T{sub eff} in the vicinity of an antenna coil. These changes in the radial profiles of the T{sub eff} show a transition of the electron kinetics from nonlocal to local regimes. This transition occurred when the electron energy relaxation lengths became smaller than the antenna half size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron magneto-hydrodynamic waves bounded by magnetic bubble

The propagation of electron magneto-hydrodynamic (EMHD) waves is studied experimentally in a 3-dimensional region of low magnetic field surrounded by stronger magnetic field at its boundaries. We report observations where bounded left hand polarized Helicon like EMHD waves are excited, localized in the region of low magnetic field due to the boundary effects generated by growing strengths of the ambient magnetic field rather than a conducting or dielectric material boundary. An analytical model is developed to include the effects of radially nonuniform magnetic field in the wave propagation. The bounded solutions are compared with the experimentally obtained radial wave magnetic field profiles explaining the observed localized propagation of waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ENERGY CONTENT AND PROPAGATION IN TRANSVERSE SOLAR ATMOSPHERIC WAVES

Recently, a significant amount of transverse wave energy has been estimated propagating along solar atmospheric magnetic fields. However, these estimates have been made with the classic bulk Alfven wave model which assumes a homogeneous plasma. In this paper, the kinetic, magnetic, and total energy densities and the flux of energy are computed for transverse MHD waves in one-dimensional cylindrical flux tube models with a piecewise constant or continuous radial density profile. There are fundamental deviations from the properties for classic bulk Alfven waves. (1) There is no local equipartition between kinetic and magnetic energy. (2) The flux of energy and the velocity of energy transfer have, in addition to a component parallel to the magnetic field, components in the planes normal to the magnetic field. (3) The energy densities and the flux of energy vary spatially, contrary to the case of classic bulk Alfven waves. This last property has the important consequence that the energy flux computed with the well known expression for bulk Alfven waves could overestimate the real flux by a factor in the range 10-50, depending on the flux tube equilibrium properties.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of parallel electron dynamics on plasma blob transport

The 3D effects on sheath connected plasma blobs that result from parallel electron dynamics are studied by allowing for the variation of blob density and potential along the magnetic field line and using collisional Ohm's law to model the parallel current density. The parallel current density from linear sheath theory, typically used in the 2D model, is implemented as parallel boundary conditions. This model includes electrostatic 3D effects, such as resistive drift waves and blob spinning, while retaining all of the fundamental 2D physics of sheath connected plasma blobs. If the growth time of unstable drift waves is comparable to the 2D advection time scale of the blob, then the blob's density gradient will be depleted resulting in a much more diffusive blob with little radial motion. Furthermore, blob profiles that are initially varying along the field line drive the potential to a Boltzmann relation that spins the blob and thereby acts as an addition sink of the 2D potential. Basic dimensionless parameters are presented to estimate the relative importance of these two 3D effects. The deviation of blob dynamics from that predicted by 2D theory in the appropriate limits of these parameters is demonstrated by a direct comparison of 2D and 3D seeded blob simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Grassy ELM regime at low pedestal collisionality in high-power tokamak plasma

Spontaneous mitigation of giant ELMs and appearance of grassy ELMs have been observed repeatedly at low pedestal collisionality (${\nu }_{\mathrm{e},\mathrm{p}\mathrm{e}\mathrm{d}}^{{\ast}}\sim 0.15$) in the high-power (P inj > 13 MW) hybrid scenario in DIII-D. Higher β p and higher q 95 appear to be beneficial to achieving the grassy ELM regime. The grassy ELM H-mode plasma shows high energy confinement performance (H 98y2 up to over 1.5) under the conditions of high neutral beam torque and high core rotation. The pedestal width appears to exceed the EPED1.0 model prediction by more than 50%. Pedestal stability analysis performed with the ELITE code indicates that the stability against low-n kink/peeling modes is improved with increased auxiliary heating power and the operational point in the grassy ELM regime is located near the ballooning boundary. The pedestal stability characteristics during the grassy ELM crashes have been investigated in comparison with the giant ELM crashes based on plasma profiles experimentally measured with high resolution and accuracy. It has been found that the underlying mechanism for the observed small-amplitude ELM crashes is mainly the expansion of the ballooning stability boundary induced by an initial radially localized collapse in the pedestal, which helps to stop the growth of instabilities and further collapse of the pedestal. The effect of electron density pedestal on mitigating edge localized instabilities has been analyzed by numerical simulation, suggesting that the electron density pedestal characterized by high n e,sep /n e,ped and low density gradient helps to stabilize peeling-ballooning modes because of a low pressure pedestal gradient and to lower the ballooning boundary mainly because of a low ion diamagnetic frequency in the pedestal region, thus triggering ballooning instabilities and producing the intrinsic grassy ELMs. Numerical simulation of the Chinese fusion engineering test reactor (CFETR) with the SOLPS code indicates that the separatrix density might be insensitive to the electron diffusivity in the pedestal region and increase with the power flowing from the core region to the edge region. Furthermore, pedestal stability analysis suggests that the flat density pedestal with high separatrix density obtained in the high-power plasma in CFETR would make the operational point close to the ballooning boundary, which is considered to help destabilize ballooning instabilities and facilitate the access to the grassy ELM regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterizing impurity sourcing and transport in the high temperature boundary of DIII-D wide pedestal QH-mode plasmas

Wide Pedestal QH-mode (WPQH) plasmas in the DIII-D tokamak show a sheath limited SOL, where electron density and temperature remain nearly constant along field lines from the midplane to the divertor. Consequently, parallel gradients are weak. The first Langmuir probe measurements in this regime point to a high sheath temperature with target electron temperature T e up to ~150 eV, leading to high carbon self-sputtering. Midplane carbon densities from SOLPS-ITER modeling of these plasmas in a double-null configuration fall far below experimental measurements unless full drifts are activated. In the drift-dependent SOLPS-ITER modeling, anomalous poloidally uniform, radially varying transport is adjusted to match measured radial electron temperature and density profiles in the pedestal and SOL region. The resulting carbon density (C6+) matches measured carbon densities just inside the separatrix. The C2+ density near the outer strike point is also consistent with spectroscopic imaging. With the ion B×∇B drift towards the X-point, carbon in the lower divertors is redistributed from the private flux region to the high field side (HFS) and pushed upstream in the SOL by poloidal E×B drifts. The B × ∇B drift dominates the radial flow of carbon as it moves upstream. Simulations with reversed toroidal field (ion B × ∇B drift away from the X-point) show a radically different behavior, where carbon accumulates on the low field side in lower divertors, and is pushed towards the HFS in the upper divertors, indicating a strong effect of particle drifts on impurity distribution. In double-null configurations which are usually used in WPQH plasmas, these drift effects tend to counterbalance, so that the carbon density and Z eff are reduced at the outer mid-plane only modestly, by around 7% in the modeling. Further predictive modeling indicates that the carbon density can be significantly reduced by an order of magnitude by implementing a single-null shape with reversed toroidal field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Properties of convective cells generated in magnetized toroidal plasmas

Convective cells for turbulence control, generated by means of biased electrodes, are investigated in the simple magnetized toroidal plasmas of TORPEX. A two-dimensional array of 24 electrodes is installed on a metal limiter to test different biasing schemes. This allows influencing significantly both radial and vertical blob velocities. It is shown that these changes agree quantitatively with the flows deduced from the time averaged potential perturbations induced by the biasing. Detailed measurements along and across the magnetic field provide a rather clear picture of the effect of biasing on time averaged profiles. The biased electrodes produce perturbations of the plasma potential and density profiles that are fairly uniform along the magnetic field. Background flows influence the location where potential variations are induced. The magnitude of the achievable potential variations in the plasma is strongly limited by cross-field currents and saturates at large bias voltages once the electrodes draw electron saturation current. A quantitative discussion on the origin of cross-field currents is presented, considering contributions related with diamagnetic drifts, ion inertia, collisions with neutrals, and viscosity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transport dynamics of self-consistent, near-marginal drift-wave turbulence. I. Investigation of the ability of external flows to tune the non-diffusive dynamics

The reduction of turbulent transport across sheared flow regions has been known for a long time in magnetically confined toroidal plasmas. However, details of the dynamics are still unclear, in particular, in what refers to the changes caused by the flow on the nature of radial transport itself. In Paper II, we have shown in a simplified model of drift wave turbulence that, when the background profile is allowed to evolve self-consistently with fluctuations, a variety of transport regimes ranging from superdiffusive to subdiffusive open up depending on the properties of the underlying turbulence. In this study, we show that externally applied sheared flows can, under the proper conditions, cause the transport dynamics to be diffusive or subdiffusive

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗