Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATES - PLASTICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Variation of strain energy release rate with plate thickness

An analytical model of a through-thickness crack in a statically stretched plate is presented in which the crack front stress state is permitted to vary in the direction of the plate thickness. The amplitude or intensity of this stress field can be made nearly constant over a major portion of the interior crack front which is in a state of plane strain. The average amount of work available for extending a small segment of the crack across the thickness is associated with an energy release rate quantity in a manner similar to the two-dimensional Griffith crack model. The theoretically calculated energy release rate is shown to increase with increasing plate thickness, indicating that available work for crack extension is higher in a thicker plate.

Sih, G. C.↗
NASA NTRS1973

Laboratory and field observations of the growth of columnar and plate crystals from frozen droplets

A laboratory experiment was initiated to grow the banded columnar crystals found in cirrus clouds and to determine if they nucleated through a freezing nucleus. Banded columnar crystals were collected in cirrus clouds and also grown in a laboratory cold box over a temperature range of -20 to -46C. They were observed to grow from a frozen droplet through several distinct crystalline transitions. The first distinct crystalline form observed following the growth of a frozen droplet was a polyhedral crystal. With further growth, the polyhedral crystal developed end plates, and it appeared to be a 'double plate.' Then the separation between the plates nearly filled in to leave the characteristic band. Certain columns (-6 to -10C) and plates (-10 to -20C) were also observed to grow from a frozen droplet and showed similar crystalline transitions.

Heymsfield, A. J.↗
NASA NTRS1974

A plate with a crack, stiffened by a partially debonded stringer

The effect of a partially debonded infinite stringer on the stress intensity factor at the crack tip is investigated. It is assumed that the stringer is bonded to an isotropic plate through an adhesive, along a line perpendicular to the crack. Due to the high stress concentration around the crack tip and on the adhesive, partial debonding is assumed to develop between the stringer and the plate. The integral equation, obtained from the continuity of displacements along the line where the stringer and the plate are bonded, is solved numerically to give the shear stress distribution between the plate and the stringer and the stress intensity factors at both crack tips.

Arin, K.↗
NASA NTRS1974

On the interaction of a vibrating plate with an acoustic medium

The interaction of a vibrating plate with an adjacent acoustic medium is important in problems involving the radiation of sound from panels, in problems involving the transmission of sound through walls of buildings, aircraft, or launch vehicles; and in problems involving the estimation of damping and the stress amplitude of vibration for panel-fatigue predictions. There appear to have been no systematic studies of the effects on the plate of fluid coupling for an arbitrary fluid-mass/plate-mass loading ratio. An attempt is made to determine this effect for a wide range of fluid-plate mass ratios without resorting to the usual simplifications of light or heavy fluid loading. Emphasis is with the plate motion rather than the radiation of sound.

Mixson, J. S.↗
NASA NTRS1975

Variation of solar-selective properties of black chrome with plating time

The spectral reflectance properties of a commercially prepared black chrome over dull nickel, both plated on steel, for various plating times of the black chrome were measured. The plating current was 180 amperes per square foot. Values of absorptance integrated over the solar spectrum, and of infrared emittance integrated over black-body radiation at 250 F were obtained. It is shown that plating between one and two minutes produces the optimum combination of highest heat absorbed and lowest heat lost by radiation.

Mcdonald, G. E.↗
NASA NTRS1975

Absolute plate motions by boundary velocity minimizations

The main interaction of the earth's interior with the lithosphere is as a material source and sink. An absolute reference frame defined by minimizing the translational motion of tectonic plate boundaries differs by 0.6 cm/year from a frame defined by hot spot traces and by 0.4 cm/year from the frame defined by the most plausible model of drag forces on the plates. The rms absolute translational velocities are about 2 cm/year for ocean-ocean plate boundaries and 1.5 cm/year for ocean-continent plate boundaries. The close agreement between the source and sink and the drag-dependent definitions suggests that the lithosphere, as a stress guide, to some extent controls the locations of its sources and sinks.

Kaula, W. M.↗
NASA NTRS1975

Flutter analysis of two parallel elastically coupled flat plates

Flutter of two parallel elastically coupled flat plates was investigated analytically. A closed-form solution including both aerodynamic and structural damping is presented for flutter of flat orthotropic plates coupled by an elastic medium. Both plates are simply supported along the side edges but are supported by deflectional, rotational, and torsional springs of arbitrary stiffness at the leading and trailing edges. Two-dimensional quasi-steady aerodynamics was utilized in the solution. Since the large number of variables present in the problem precludes extensive parametric studies, results are presented to indicate the basic flutter characteristics of coupled two-plate systems and to assess the validity of previously published modal solutions for similar problems.

Shore, C. P.↗
NASA NTRS1976

A metal sheet stiffened by a partially debonded composite quarter-plate

An isotropic sheet stiffened by means of an orthotropic quarter-plate is considered. The quarter-plate is assumed to be perfectly bonded to the metal sheet everywhere except an area of debonding which may develop due to high stress concentrations. The adhesive which has a small constant thickness is treated as a shear spring. The loads are applied at infinity and supposed to be transmitted through the metal plate. Shear stress distribution between the two plates was obtained from the continuity of displacements along an area where they were bonded to each other.

Arin, K.↗
NASA NTRS1976

Evaluation of the flat-plate solar collector system for electric power generation

This evaluation of the flat-plate collector system was designed to determine the number of flat-plate collectors required to generate a given amount of electricity with optimum efficiency. Variable parameters are the temperature of the heat-transport fluid, both to and from the collector field. In the analysis, the efficiency of the flat-plate collectors was coupled to the efficiency of the thermal cycle to calculate optimal overall system efficiencies. Overall system efficiencies for the system are on the order of 3.5 per cent or less. Over two million 4 ft-by-4 ft collectors would be required to produce 100,000 kW(e). Based on the results, it can be shown that the limiting factor in the use of the flat-plate collector system for electric power generation is the efficiency of the collectors. An increase in the overall system efficiency can occur only if the collector efficiency can be increased at higher surface temperatures.

Athey, R. E.↗
NASA NTRS1976

Aeroheating model advancements featuring electroless metallic plating

Discussed are advancements in wind tunnel model construction methods and hypersonic test data demonstrating the methods. The general objective was to develop model fabrication methods for improved heat transfer measuring capability at less model cost. A plated slab model approach was evaluated with cast models containing constantan wires that formed single-wire-to-plate surface thermocouple junctions with a seamless skin of electroless nickel alloy. The surface of a space shuttle orbiter model was selectively plated with scaled tiles to simulate, with high fidelity, the probable misalignments of the heatshield tiles on a flight vehicle. Initial, Mach 8 heating results indicated a minor effect of tile misalignment roughness on boundary layer transition, implying a possible relaxation of heatshield manufacturing tolerances. Some loss of the plated tiles was experienced when the model was tested at high heating rates.

Stalmach, C. J., Jr.↗
NASA NTRS1976

Industrialization of the ion plating process

A new process referred to as ion plating by induction heating (IPIH) is described, which combines the advantages of both ion plating and induction heating. The IPIH apparatus consists of the specimen (cathode) to be coated and the evaporation heating source, which is a ceramic crucible containing the metal to be heated. The specimen is an internal part of the high-voltage ceramic-metal vacuum feedthrough and is connected to the negative terminal of the high-voltage power supply, the positive terminal of the power supply being grounded. The plating conditions are the same as those most commonly used in industrial ion plating. A number of metals - such as nickel, iron, platinum - which were practically impossible to deposit by resistance heating evaporation can now be effectively evaporated and deposited to any desired thickness. Excellent adherence is observed for many metals deposited on various metal surfaces in thicknesses from 0.15 to 50 microns, regardless of the materials selected for coating and substrate.

Spalvins, T.↗
NASA NTRS1977

Forced vibrations of simply supported orthotropic sandwich plates

Force transmissibility, driving-point impedance, and transfer impedance of a simply supported rectangular orthotropic sandwich plate are investigated. The plate is driven by a sinusoidally varying point force either at the plate center or at any arbitrary location. The variation of force transmissibility and impedance with frequency, and the manner in which this is influenced by the various sandwich-plate parameters are studied and presented graphically.

Bhat, B. R.↗
NASA NTRS1977

The influence of composition, annealing treatment, and texture on the fracture toughness of Ti-5Al-2.5Sn plate at cryogenic temperatures

The plane strain fracture toughness K sub Ic and conventional tensile properties of two commercially produced one-inch thick Ti-5Al-2.5Sn plates were determined at cryogenic temperatures. One plate was extra-low interstitial (ELI) grade, the other normal interstitial. Portions of each plate were mill annealed at 1088 K (1500 F) followed by either air cooling or furnace cooling. The tensile properties, flow curves, and K sub Ic of these plates were determined at 295 K (room temperature), 77 K (liquid nitrogen temperature), and 20 K (liquid hydrogen temperature).

Vanstone, R. H.↗
NASA NTRS1980

Electrodeposition process reduces cost of cold plates

Efficient nickel heat-exchanger cold plates can be fabricated less expensively than stainless steel plates. If adapted to mass production, it is estimated that nickel cold plates might be made for about 30 percent less than stainless-steel plates.

Ruppe, E. P.↗
NASA NTRS1979

Experimental investigation of jet-induced loads on a flat plate in hover out-of-ground effect

Effects of varying jet decay rate on jet-induced loads on a flat plate located in the plane of the jet exit perpendicular to the jet axis were investigated using a small-scale laboratory facility. Jet decay rate has been varied through use of two cylindrical centerbodies having either a flat or hemispherical tip, which were submerged various distances below the flat plate jet exit plane. Increased jet decay rate, caused by the presence of a center-body or plug in the jet nozzle, led to an increased jet-induced lift loss on the flat plate. Jet-induced lift losses reached 1 percent of the jet thrust for the quickest jet decay rates for plate areas equal to 100 times the effective jet exit area. The observed lift loss versus jet decay rate trend agreed well with results of previous investigations.

Kuhlman, J. M.↗
NASA NTRS1978

Present-day plate motions

An instantaneous plate-motion model, Relative Motion 2 (RM2), is obtained by inverting a data set comprising 110 spreading rates, 78 transform fault azimuths, and 142 earthquake slip vectors. RM2 is compared with angular velocity vectors which best fit the data along individual plate boundaries and, while the model performs close to optimally in most regions, attention is directed to those regions which are not suitably described by the model. Reasons for the discrepancies between RM2 and observations for the India-Antarctica plate boundary, the Pacific-India plate boundary, and the east-west trending transform fault azimuths observed in the French-American Mid-Ocean Undersea Study area are discussed.

Minster, J. B.↗
NASA NTRS1980

Application of Laser Ranging and VLBI Data to a Study of Plate Tectonic Driving Forces

The conditions under which changes in plate driving or resistive forces associated with plate boundary earthquakes are measurable with laser ranging or very long base interferometry were investigated. Aspects of plate forces that can be characterized by such measurements were identified. Analytic solutions for two dimensional stress diffusion in a viscoelastic plate following earthquake faulting on a finite fault, finite element solutions for three dimensional stress diffusion in a viscoelastic Earth following earthquake faulting, and quantitative constraints from modeling of global intraplate stress on the magnitude of deviatoric stress in the lithosphere are among the topics discussed.

Solomon, S. C.↗
NASA NTRS1980

A correlation method to predict the surface pressure distribution of an infinite plate or a body of revolution from which a jet is issuing

A correlation method to predict pressures induced on an infinite plate by a jet exhausting normal to the plate into a subsonic free stream was extended to jets exhausting at angles to the plate and to jets exhausting normal to the surface of a body revolution. The complete method consisted of an analytical method which models the blockage and entrainment properties of the jet and an empirical correlation which accounts for viscous effects. For the flat plate case, the method was applicable to jet velocity ratios up to ten, jet inclination angles up to 45 deg from the normal, and radial distances up to five diameters from the jet. For the body of revolution case, the method was applicable to a body at zero degrees angle of attack, jet velocity ratios 1.96 and 3.43, circumferential angles around the body up to 25 deg from the jet, axial distances up to seven diameters from the jet, and jet-to-body diameter ratios less than 0.1.

Perkins, S. C., Jr.↗