Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROPAGATION MODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Low-frequency radio emissions at Neptune

The Voyager 2 plasma wave receiver detected weak radio emissions from Neptune's magnetosphere in the frequency range of 3 - 60 kHz. The emissions occurred in bursts lasting for typically 1.5 hours, often occurring twice per planetary rotation. Most of these radio bursts were detected within several degrees of the magnetic equatorial plane. During the passage through the magnetosphere, electrostatic upper hybrid resonance bands were observed close to the magnetic equator in conjunction with intensifications of the radio emissions at frequencies close to and above the upper hybrid bands. Further, near closest approach, the radio emissions were observed to cross the right-hand cutoff frequency with no apparent attenuation. It is concluded that the Neptunian radio emissions below about 60 kHz are produced by mode conversion from the upper hybrid waves and propagate in the ordinary mode into beams within about 12 deg of the magnetic equator. There is also evidence of an extraordinary mode emission at about 60 kHz which is apparently generated by an entirely different source from the escaping continuum radiation.

Kurth, W. S.↗
NASA NTRS1980

Examination of group-velocity criterion for breakdown of vortex flow in a divergent duct

A group-velocity criterion for vortex breakdown implied by wave trapping theory is applied to vortex flows in a slightly divergent duct that exhibits breakdown. The group velocities for both symmetric (n = 0) and nonsymmetric (n = plus or - 1) modes of wave propagation are calculated for the experimental data. It is found that the flow ahead of the breakdown region is always supercritical and stable to these modes of disturbances. However, the flow field behind the breakdown region may be either supercritical or subcritical to the modes n = 0 and n = 1, and always supercritical to mode n = -1. The flow field behind this breakdown region is unstable to the asymmetric mode disturbance (n = 1) for a finite range of wavenumbers. The calculated frequencies of the unstable disturbances are in good agreement with the frequencies obtained from the experimental measurements.

Tsai, C.-Y.↗
NASA NTRS1992

Control of VLF burst activity in the nightside ionosphere of Venus by the magnetic field orientation

A burst identificaton method developed by Ho et al. (1991) is used to analyze data on the nightside ionosphere of Venus in order to determine whether VLF bursts observed there are better interpreted as whistler mode waves or ion acoustic waves. The correlation between burst occurrence and the angle between the magnetic field and the radial direction, as well as the spacecraft flight direction are examined. Narrow-band 100-Hz bursts are found to be more frequently associated with radial magnetic fields while wideband signals are more frequently associated with horizontal fields. Under the assumption of vertical propagation, the normalized 100-Hz burst rate inside the resonance cone is larger than that outside. The burst rate inside the resonance cone dominates the altitude distribution. By assuming vertical propagation, the 100-Hz signals clearly divide into two populations. One is whistler mode propagating inside the resonance cone. The other is a nonpropagating mode outside the resonance cone which decreases quickly with altitude with a scale height of about 20 km.

Ho, C.-M.↗
NASA NTRS1991

Dynamic delamination crack propagation in a graphite/epoxy laminate

Dynamic delamination crack propagation in a (90/0) 5s Graphite/Epoxy laminate with an embedded interfacial crack was investigated experimentally using high speed photography. The dynamic motion was produced by impacting the beamlike laminate specimen with a silicon rubber ball. The threshold impact velocities required to initiate dynamic crack propagation in laminates with varying initial crack positions were determined. The crack propagation speeds were estimated from the photographs. Results show that the through the thickness position of the embedded crack can significantly affect the dominant mechanism and the threshold impact velocity for the onset of crack movement. If the initial delamination is placed near the top of bottom surface of the laminate, local buckling of the delaminated plies may cause instability of the crack. If the initial delamination lies on the midplane, local buckling does not occur and the initiation of crack propagation appears to be dominated by Mode II fracture. The crack propagation and arrest observed was seen to be affected by wave motion within the delamination region.

Grady, J. E.↗
NASA NTRS1995

The double oval UV auroral distribution. 2: The most poleward arc system and the dynamics of the magnetotail

The poleward arc system of a double oval distribution is shown to activate at the end of the optical expansion phase signifying the beginning of substorm recovery. The velocity dispersed ion signature (VDIS) can exist coincident with this discrete aurora developing on the most poleward oval. Although the VDIS is usually associated with ion beams in the plasma sheet boundary layer, it is demonstrated that the ionospheric signature is not beamlike but distributed in pitch angle. At the time when the double oval begins to form, the magnetic field in the magnetotail lobe becomes less flared and can show Pc 5 period oscillations. Similar pulsations also exist in the ionosphere associated with the most poleward oval and with stationary surge formation. Theoretical considerations link this phenomenon with a wave source tailward of x(sub GSE) = -30R(sub E) and fast mode evanescent waves propagating earthward in the tail lobe region. In this case the magnetotail appears to act like a waveguide and the plasma sheet boundary layer as a resonance region. This implies that the coupling of this fast mode waves is with the plasma sheet boundary layer and not with dipolar like field lines. The implications of this for the reconnection model of substorms are discussed.

Elphinstone, R. D.↗
DOE OSTI2022

Dynamic coupling and spin-wave dispersions in a magnetic hybrid system made of an artificial spin-ice structure and an extended NiFe underlayer

We present a combined experimental and numerical study of the spin-wave dispersion in a NiFe artificial spin-ice (ASI) system consisting of an array of stadium-shaped nanoislands deposited on the top of a continuous NiFe film with non-magnetic spacer layers of varying thickness. The spin-wave dispersion, measured by wavevector resolved Brillouin light scattering spectroscopy in the Damon–Eshbach configuration, consists of a rich number of modes, with either stationary or propagating character. We find that the lowest frequency mode displays a bandwidth of ~0.5 GHz, which is independent of the presence of the film underneath. On the contrary, the Brillouin light scattering intensity of some of the detected modes strongly depends on the presence of the extended thin-film underlayer. Micromagnetic simulations unveil the details of the dynamic coupling between the ASI lattice and film underlayer. Interestingly, the ASI lattice facilitates dynamics of the film either specific wavelengths or intensity modulation peculiar to the modes of the ASI elements imprinted in the film. Our results demonstrate that propagating spin waves can be modulated at the nanometer length scale by harnessing the dynamic mode coupling in the vertical, i.e., the out-of-plane direction of suitably designed magnonic structures.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Three-dimensional linear instability modeling of the cloud level Venus atmosphere

Based on the success of several two-dimensional (latitude, longitude) linear barotropic instability models at matching some of the observed characteristics of the cloud level, polar region of the Venus atmosphere, a more realistic, linear, three-dimensional (height, latitude and longitude) model has been developed to further test the hypothesis that the observed features can be described by linear instability theory. The approach taken is to vary the model input parameters to see whether it is possible to produce modes that resemble the observations of wave activity and to compare those input parameters with other observations of the mean state. Sensitivity studies show that in addition to a well-documented dependence on the mean zonal wind, the growth and propagation of unstable modes depends on the latitude variation of the mean temperature (and hence static stability). These studies have led to the specification of a model basic state wind and temperature field that produces modes which are matched to observations of spatial structure, preferred wavenumber and phase speed of the polar disturbances. Wavenumber 2 is found to have the shortest growth time and unlike the two-dimensional results, wavenumbers 1-3 share a nearly common period of about 3 days. The derived basic state has a temperature field that is quite similar to Pioneer Venus observations; however, in some regions the model basic state wind field departs from cyclostrophic values based on temperature observations.

Elson, Lee S.↗
DOE OSTI2026

Magnonic spontaneous oscillation induced by parametric pumping

Spontaneous dynamic systems have attracted significant attention for their rich underlying physics such as phase-locking and synchronization. In this work, we report a new mechanism of generating magnetic spontaneous oscillation via parametric pumping. By applying a pump tone to excite propagating spin waves in a yttrium iron garnet delay line, four-wave mixing converts the pump mode into two phase-autonomous propagating magnon modes, i.e. a spontaneous mode with nearly twice the wavenumber of the pump mode and an idler mode with nearly zero wavenumber. This allows us to reliably generate ultrasharp spin wave dynamics with broad frequency tunability from the pump and magnetic field. We show that the spontaneous mode can be phase-locked to a probe tone, similar to an auto-oscillator. Furthermore, the spontaneous dynamics can be used to implement a high-gain magnonic parametric amplifier with a gain up to 40 dB. Our results open a new avenue for studying nonlinear magnonics and synchronization physics in propagating magnon geometry and for developing new magnonic devices.

Li, Yi↗
DOE OSTI2021

Monitoring of corrosion effects in pipes with multi-mode acoustic signals

Current commercial long-range guided wave inspection and monitoring technologies for pipes usually require establishment of certain specific acoustic modes for wave propagation and use a large number of sensors in a certain geometric arrangement (for example, uniformly-spaced arrays of sensors on a collar, placed around a pipe). This paper, in contrast, presents a long-range corrosion detection method in pipes based on multi-mode guided acoustic waves, generated and received using simple, single-element sensors. In this technique, available guided wave modes in any interrogated zone of the structure are automatically down-selected by the medium, and changes in energy distribution over the selected modes are analyzed through signal processing to monitor material loss or addition. Here, to investigate the feasibility of the proposed method, we have performed both experimental and numerical simulation studies on 50.8-mm (2-in)-diameter schedule-40 carbon steel pipes. In these studies, a linear chirp signal is injected in compression mode, perpendicular to the surface of the pipe, generating multi-mode, multi-directional guided waves that travel within the pipe wall. Corrosion effects in the pipes are simulated numerically and experimentally. To reduce errors in the measurement technique due to changes in the local or global temperature of the measured media, a universal temperature compensation algorithm is introduced. The experimental results show good agreement with simulation results, indicating that the proposed multi-mode wave generation and detection in a pipe could be used for long-range detection and monitoring of corrosion effects, such as pipe wall losses or solid material deposits.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Ultrasonic verification of five wave fronts in unidirectional graphite epoxy composite

The existence of five different waves fronts in a unidirectional graphite fiber reinforced epoxy composite with energy flux propagation at the angle of 60 deg with respect to the fiber direction is verified by measuring their corresponding group and phase velocities of longitudinal and shear waves using the through transmission technique. The experimental and theoretical values of phase velocities show excellent agreement for all three modes of wave propagation. It is also verified that the maximum output voltage amplitude is obtained when the line joining the centers of the transmitting and receiving transducers is parallel to the energy propagation direction defined by the deviation angle.

Seng, Han-Song↗
NASA NTRS1982

Meteorological effects on laser propagation for power transmission

An examination of possible laser operating parameters for power transmission to earth from solar power satellites is presented, with particular attention paid to assuring optimal delivery at midlatitudes. The degradation of beam efficiency due to molecular scattering, molecular absorption, aerosol scattering, and aerosol absorption during beam propagation through the atmosphere can be alleviated by judicious choice of wavelength windows, elevating the receptor sites, using a vertical propagation path, or by hole boring, i.e., vaporizing the aerosol particles in the beam path. Analyses are given for the beam propagation through fog, haze, clouds, and snow using various transitions. Only weapons-quality lasers are seen as being capable of boring through clouds and aerosols, employing a CW beam with superimposed pulses at high power densities. It is concluded that further short wavelength transmission experiments be performed to demonstrate transmission feasibility with the CW/pulsed mode of beam propagation.

Beverly, R. E., III↗
NASA NTRS2013

Automated Generation of Fault Management Artifacts from a Simple System Model

Our understanding of off-nominal behavior - failure modes and fault propagation - in complex systems is often based purely on engineering intuition; specific cases are assessed in an ad hoc fashion as a (fallible) fault management engineer sees fit. This work is an attempt to provide a more rigorous approach to this understanding and assessment by automating the creation of a fault management artifact, the Failure Modes and Effects Analysis (FMEA) through querying a representation of the system in a SysML model. This work builds off the previous development of an off-nominal behavior model for the upcoming Soil Moisture Active-Passive (SMAP) mission at the Jet Propulsion Laboratory. We further developed the previous system model to more fully incorporate the ideas of State Analysis, and it was restructured in an organizational hierarchy that models the system as layers of control systems while also incorporating the concept of "design authority". We present software that was developed to traverse the elements and relationships in this model to automatically construct an FMEA spreadsheet. We further discuss extending this model to automatically generate other typical fault management artifacts, such as Fault Trees, to efficiently portray system behavior, and depend less on the intuition of fault management engineers to ensure complete examination of off-nominal behavior.

Spinup and Orient↗
NASA NTRS1987

Measurement of impact-induced delamination buckling in composite laminates

High-velocity impact tests were performed on graphite/epoxy laminates with embedded delaminations. High-speed photography of the transversely impacted laminates shows that dynamic local buckling of the sublaminate region formed by the delamination can cause a mode-I-dominated propagation of that delamination. Simultaneous recordings of the dynamic strain histories at several locations in the buckled sublaminate region are used to measure the laminate and sublaminate responses to the impact loading. Flexural motion resulting from transverse impact is shown to reduce local buckling of the sublaminate. This buckling causes a progressive separation of the delaminated surfaces and subsequent extension of the delamination in a mode-I dominated fashion.

Grady, J. E.↗
DOE OSTI2025

Interfacial Strong Coupling and Negative Dispersion of Propagating Polaritons in Freestanding Oxide Membranes

Membranes of complex oxides like perovskite SrTiO3 extend the multi-functional promise of oxide electronics into the nanoscale regime of 2D materials. Here, it is demonstrated that freestanding oxide membranes supply a reconfigurable platform for nano-photonics based on propagating surface phonon polaritons. Infrared near-field imaging and spectroscopy enabled by a tunable ultrafast laser are applied to study pristine nano-thick SrTiO3 membranes prepared by hybrid molecular beam epitaxy. As predicted by coupled mode theory, it is found that strong coupling of interfacial polaritons realizes symmetric and antisymmetric hybridized modes with simultaneously tunable negative and positive group velocities. By resolving reflection of these propagating modes from membrane edges, defects, and substrate structures, their dispersion is quantified with position-resolved nano-spectroscopy. Remarkably, polariton negative dispersion is found to be both robust and tunable through choice of membrane dielectric environment and thickness, and proposes a novel design for in-plane Veselago lensing harnessing this control. This work lays the foundation for tunable transformation optics at the nanoscale using polaritons in a wide range of freestanding complex oxide membranes.

freestanding oxide membranes↗
DOE OSTI2021

Chiral Topological Surface States on a Finite Square Photonic Crystal Bounded by Air

Chiral, topologically protected, photonic surface states can be found at the boundary between gyrotropic photonic crystals where a changing magnetic field induces different topology across the interface. Typically, photonic crystals with either a suitable band structure on both sides of the interface to provide a band gap and evanescent decay of the surface states away from the interface, or an outer layer with engineered material properties is required. In this paper, we show the emergence of topological, unidirectional surface states at the termination of finite gyrotropic photonic crystals with a simple square lattice and C 4 rotational symmetry bounded by a vacuum, eliminating the need for an outside layer to enable chiral surface modes. Here, we start from an infinite, time-reversal-symmetry-breaking photonic crystal with a band gap associated with bands with nonzero Chern numbers, different from all-zero Chern numbers in air. We then modify the photonic crystal to move this band gap below the light line, while maintaining the Chern-number discontinuities. Band-structure calculations for a supercell approximating a photonic crystal finite in the direction normal to the surface demonstrate the existence, dispersion, and chirality of the surface mode. Extensive direct scattering calculations for a point source and spatial Fourier analysis further reveal a unidirectional free-space topological surface state, which propagates counterclockwise around the surface of a finite photonic crystal, providing a nearly foolproof way to cross-check the surface-mode band structure unaffected by backscattering from local defects. Additionally, scattering simulations allow an independent characterization of the state dispersion and unveil the robustness of the topological plasmonic mode propagation around the 90° bends of the structure, being due to only radiation leakage. In contrast to buried topological surface states, the observed surface modes at the photonic crystal–air interface have the advantage of being accessible to the outside world, allowing one to take advantage of the defect-tolerant backscattering-free surface modes to engineer emission from photonic crystal surfaces into arbitrary free-space beam shapes and directions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2017

Instability Wave-Streak Interactions in a Supersonic Boundary Layer

Optimal initial conditions for transient growth in a two-dimensional boundary layer flow correspond to stationary, counter-rotating vortices that subsequently develop into streamwise elongated streaks, which are characterized by an alternating pattern of low and high streamwise velocity. For incompressible flows, previous studies have shown that boundary layer modulation due to streaks below a threshold amplitude level can stabilize the Tollmien-Schlichting instability waves, resulting in a delay in the onset of laminar-turbulent transition. In the supersonic regime, the linearly, most-amplified waves become three-dimensional, corresponding to oblique, first-mode waves. This change in the character of dominant instabilities leads to an important change in the transition process, which is now dominated by oblique breakdown via nonlinear interactions between pairs of first-mode waves that propagate at equal but opposite angles with respect to the free stream. Because the oblique breakdown process is characterized by a rapid amplification of stationary streamwise streaks, artificial excitation of such streaks may be expected to promote transition in a supersonic boundary layer. Indeed, suppression of those streaks has been shown to delay the onset of transition in prior literature. Consistent with those findings, the present study shows that optimally growing stationary streaks indeed destabilize the first-mode waves, but only when the spanwise wavelength of the instability waves is equal to or smaller than twice the streak spacing. Transition in a benign disturbance environment typically involves first-mode waves with significantly longer spanwise wavelengths, and hence, these waves are stabilized by the optimal growth streaks. Thus, as long as the amplification factors for the destabilized, short wavelength instability waves remain below the threshold level for transition, a significant net stabilization is achieved, yielding a transition delay that is comparable to the length of the laminar region in the uncontrolled case.

Boundary layer transition↗
NASA NTRS2011

Effect of Data Reduction and Fiber-Bridging on Mode I Delamination Characterization of Unidirectional Composites

Reliable delamination characterization data for laminated composites are needed for input in analytical models of structures to predict delamination onset and growth. The double-cantilevered beam (DCB) specimen is used to measure fracture toughness, GIc, and strain energy release rate, GImax, for delamination onset and growth in laminated composites under mode I loading. The current study was conducted as part of an ASTM Round Robin activity to evaluate a proposed testing standard for Mode I fatigue delamination propagation. Static and fatigue tests were conducted on specimens of IM7/977-3 and G40-800/5276-1 graphite/epoxies, and S2/5216 glass/epoxy DCB specimens to evaluate the draft standard "Standard Test Method for Mode I Fatigue Delamination Propagation of Unidirectional Fiber-Reinforced Polymer Matrix Composites." Static results were used to generate a delamination resistance curve, GIR, for each material, which was used to determine the effects of fiber-bridging on the delamination growth data. All three materials were tested in fatigue at a cyclic GImax level equal to 90% of the fracture toughness, GIc, to determine the delamination growth rate. Two different data reduction methods, a 2-point and a 7-point fit, were used and the resulting Paris Law equations were compared. Growth rate results were normalized by the delamination resistance curve for each material and compared to the nonnormalized results. Paris Law exponents were found to decrease by 5.4% to 46.2% due to normalizing the growth data. Additional specimens of the IM7/977-3 material were tested at 3 lower cyclic GImax levels to compare the effect of loading level on delamination growth rates. The IM7/977-3 tests were also used to determine the delamination threshold curve for that material. The results show that tests at a range of loading levels are necessary to describe the complete delamination behavior of this material.

Murri, Gretchen B.↗