A study of solid propellant rocket motor command termination by water injection
Optimal water quench of solid rockets using injection normal to propellant surface
Gerber, W.↗
SEARCH · Search NASA
Results for “Quench”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Field-ion microscopy of Frank loops in platinum - Computer simulation and experimental observation
Various Frank loops in quenched and annealed Pt, examining dislocations with field ion microscopy and computer simulated approximations
Hren, J. J.↗
Air lock mechanism speeds specimen testing in high-temperature vacuum furnaces
Mechanism, made of 347 stainless steel, is attached to furnace port by bolted flange. Unit incorporates quick opening, high vacuum valve and associated fittings which provide connections to air lock evacuation and to inert gas supply for quenching specimen after it is withdrawn from furnace into air lock.
Whitehead, C.↗
Ordering in CuAu
Rapidly quenched CuAu ordered state development on low temperature annealing, presenting Young modulus variation as function of heat treatment time
Brotzen, F. R.↗
Embrittlement of a ferrous alloy in a partially dissociated hydrogen environment
Quenched and tempered steel, investigating embrittlement as function of temperature in partially dissociated atomic hydrogen environment
Nelson, H. G.↗
A low cost versatile arc melter
Arc melter using Pyrex pipe cross for controlled atmosphere chamber, incorporating Ar jet into electrode holder for dynamic flushing and rapid quenching
Cadieu, F. J.↗
Injection and distribution of liquids in the flow fields of blunt shapes at hypersonic speeds
A possible method for reducing the attenuation of radio transmission from hypersonic vehicles is by injection of a liquid into the flow field. The hot plasma layer surrounding the vehicle could presumably be quenched if the latent heat of the liquid and the heat capacity of the vapor could be utilized efficiently. In the case of stagnation-point injection, the momentum of the liquid could be utilized to modify the bow shock and possibly reduce the initial ionization. To attain these objectives of efficient coolant utilization or modification of the bow shock a knowledge of the liquid injection, atomization, spray penetration, and evaporation processes is required. This report presents the results of a study of liquid injection into hypersonic flow fields. A simplified theory for evaporation distances is derived and is shown to be in qualitative agreement with experimental data. Correlation of experimental data for maximum cross-current penetration of the liquid spray for injection near the shoulder pf a hemisphere cylinder, a sphere 9° cone, and a Mercury model are given. These data were obtained in the Langley Mach 8 variable density tunnel with both liquid nitrogen and water injection to provide a large range of liquid parameters. Flow-field disturbances, as indicated by schlieren photographs and surface pressures, increased with the ratio of coolant mass flux to airstream mass flux. For stagnation-point injection, the maximum shock standoff distance was correlated by the ratio of the liquid jet momentum flux to the airstream momentum flux.
Ivan E. Beckwith↗
PTFE films with improved flexibility
Development and application of flexible polytetrafluroethylene films for expulsion bladders in spacecraft propellant tanks are described. Flexibility of material is obtained by reducing crystallinity through annealing and quenching in water. Physical and mechanical properties of material are presented.
Muraca, R. F.↗
Laboratory CO2 photolysis studies related to planetary atmospheres
The CO(a 3II) state, the upper state of the Cameron bands, was characterized with respect to its average radiative lifetime and its quenching coefficients for a series of simple molecules. The CO2 recombination reaction (O(3P) + CO + M yields CO2 + M) was studied as a function of temperature. For M = CO, the rate constant can be expressed as k = 6.5 x 10/33 exp(-4340 plus or minus 550/RT) cm to the 6th power molec/2 sec/1, whereas the rate for M = CO2, the pertinent species in the planetary atmospheres, is 1.6 times greater. The quantum yield for CO2 photodissociation was measured in the 1200-1500 A region, using atomic line sources. The yield throughout this spectral region was much lower than that measured at 1470 A, the lowest value obtained being 8% at 1304 A.
Slanger, T. G.↗
Research investigation directed toward extending the useful range of the electromagnetic spectrum
The lifetimes and fine structure of He(-) were studied using time-of-flight techniques and quenching by a static axial magnetic field. Using level-crossing spectroscopy the hyperfine constants A and B and the lifetime of the 3 2P3/2 state of Li-7 were measured. Polarization of the Ru 7S level was created as a first step in determining the hyperfine structure of the alkali excited S state. The parametric interaction between light and microwaves in optically pumped Rb-87 vapor were investigated. Measurements and analyses of transitions in formaldehyde and its isotopic species and in the lowest two excited vibrational states of H2CO were also made, as well as of transitions in furan, pyrrole, formic acid, and cyanoacetylene. The Hanle effect was studied in the NO molecule, and RF oscillators were developed with flat, wideband output to observe excited state hyperfine transitions at zero field. Data was generated on the time-dependent behavior of photon echoes in ruby. Stimulated Raman scattering was studied in atomic Tl vapor. A Q switched, temperature-tuned ruby laser was developed which operates between 6934 and 6938 A. The frequency shift due to resonant interaction between identical radiating atoms was calculated.
Hartmann, S. R.↗
Electrostatic instability of ring current protons beyond the plasmapause during injection events
The stability of ring current protons with an injection spectrum modeled by an m = 2 mirror distribution function was examined for typical ring current parameters. It was found that the high frequency loss cone mode can be excited at wave numbers K lambda sub Di about = to 0.1 to 0.5, at frequencies omega about = to (0.2 to 0.6) omega sub pi and with growth rates up to gamma/omega about = to 0.03. These waves interact with the main body of the proton distribution and propagate nearly perpendicular to the local magnetic field. Cold particle partial densities tend to reduce the growth rate so that the waves are quenched at or near to the plasmapause boundary. Wave e-folding lengths are comparable to 0.1 R sub e, compared to the value of about 4 R sub e found for ion cyclotron waves at the same plasma conditions.
Coroniti, F. V.↗
The excitation of O2 in auroras
Newly measured electron impact cross sections for excitation of the a 1 Delta g and b 1 Sigma g+ electronic states of O2 were employed to predict the absolute volume emission rates from these states under auroral conditions. A secondary electron electron flux typical of an IBC II nighttime aurora was used and the most important quenching processes were included in the calculations. The new excitation cross sections for the a 1 Delta g and b 1 Sigma g+ states are more than an order of magnitude larger than previous estimates, and lead to correspondingly greater intensities in the atmospheric and IR-atmospheric band systems. The calculated intensity ratios of the volume emission rates of 7621 A and 1.27 microns to that for 3914 A are smaller than obtained from aircraft observations and recent rocket experiments.
Cartwright, D. C.↗
Amorphous magnetism in fcc Vicalloy 2
The results of magnetization and Mossbauer experiments are reported which give evidence for superparamagnetism in the quenched face centered cubic (gamma) phase of the ternary system Fe(0.34)C(0.52)V(0.14) (Vicalloy 2). while the magnetization data agree with the limited data of Nesbitt et al., this more complete study shows clearly that this alloy does not acquire long-range ferromagnetic order, nor does it indicate either antiferromagnetic long-range ordering or mictomagnetic behavior, down to 4.2 K. The data can best be described as resulting from ferromagnetic clusters in a weakly magnetic lattice. The Mossbauer data show a slightly broadened single line spectrum of 300 K which broadens with decreasing temperature without development of resolvable hyperfine splitting down to 4.2 K. The broadening is attributed to relaxation effects associated with magnetic cluster coalescence.
Cusick, J. P.↗
Heterogeneous nucleation of gamma prime in Al-Ag and Al-Ag /Cd or Cu/ alloys.
Results of transmission electron microscopy studies of heterogeneous nucleation of the metastable gamma prime phase were made in binary and ternary alloys of Al-5 at. % Ag, Al-4.8 at. % Ag-0.15 at. % Cd, and Al-4.8 at. % Ag-0.2 at. % Cu. Heterogeneous nucleation of gamma prime was found to be associated with four types of dislocations, regardless of the quenching treatment or alloy additions which were used. Nucleation was found to occur on: (a) jogged dislocations; (b) helical dislocations; (c) dislocation loops; (d) heterogeneous climb sources. Only one nucleation mechanism was found to be unique to the ternary alloys: that of nucleation on heterogeneous climb sources.
Passoja, D. E.↗
Photovoltage inversion effect and its application to semiconductor surface studies: CdS.
Experimental results on the surface states of the basal plane of CdS are presented and discussed in the light of a model of the photovoltage inversion effect. It is found that the surface states associated with this effect are in poor communication with the bulk and under normal conditions may require long periods of time to reach equilibrium. A combination of photovoltage inversion, photovoltage quenching, and photovoltage spectroscopy is believed to constitute a very effective tool for the study of surfaces of wide energy gap semiconductors.
Lagowski, J.↗
Deactivation of N2 A/super 3/Sigma/sub u/+ molecules in the aurora.
Recent rocket observations of the molecular nitrogen Vegard-Kaplan system in the aurora have been reinterpreted using an atmospheric model based on mass spectrometer measurements in an aurora of similar intensity at the same time of year. It is found that the population rates of the considered levels in the aurora are accurately determined by radiative cascade from two other states excited by direct electron impact. In some bright auroras the role of NO in quenching the lower vibrational levels of the A state is significant. The conclusions are based on a number of relevant auroral observations in combination with calculations using electron cross section and transition probability measurements by Shemansky and Broadfoot (1971).
Shemansky, D. E.↗
6300 A quantum efficiency of the recombination mechanism in the night-time F layer.
Simultaneous airglow and electron content measurements made at Hawaii are used to infer the number of 6300 and 6364 A quanta produced per electron lost in the nighttime F layer of the ionosphere. The equation of continuity of electrons is then solved numerically to obtain the electron density profile, and the amount of quenching is estimated. This leads to the number of excitations of O(super-1 D) per O2(+) recombination (epsilon). We find, for an exospheric temperature of 1100 K, epsilon is equal to 1.1 plus or minus 0.6, in good agreement with Zipf's laboratory measurement at 300 K.
Brown, W. E.↗
Electronic characteristics of 'real' CdS surfaces.
Photovoltage spectroscopy (including photovoltage inversion and photovoltage quenching) was used to determine the electronic characteristics of real (basal and prismatic) surfaces of CdS. In room atmosphere, surface states with the following positions were found in the cadmium surfaces: Ec - Et equal to 0.05, 0.4, and 0.8 eV, and Ev - Et equal to 0.83 eV. The same surface states were present in the sulfur surfaces, with the exception of those at Ec - Et equal to 0.4 eV. In the prismatic and unetched basal surfaces, states at Ec - Et equal to 1.1 eV were found in addition to all of those found on the cadmium surfaces.
Lagowski, J.↗