Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reductive Effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Hexavalent Chromium Remediation: Hybrid Approach with Adsorption and Chemical/Biological Reduction - 18357

In this research the coupling of hexavalent chromium -Cr (VI)- removal technologies is investigated for remediation of contaminated sites. The process proposed in this research has two steps, with multiple treatment options investigated for each step to yield a variety of possible combinations. For the first step, Cr(VI) removal with ion exchange and granular activated carbon is investigated. Both chemical and biological technologies were investigated for the second step. Calcium polysulfide, ferrous sulfate, emulsified oil, fruit juice, and molasses, zero valent iron (ZVI) were used. The results show that: a selective ion-exchange resin removed 7 and 11 times more Cr (VI) than a non-selective resin and a granular activated carbon, respectively; Both calcium polysulfide and ferrous sulfate resulted in > 99% removal of Cr (VI). A lower dosage of CaSx (2 x stoichiometric ) is needed as compared to ferrous sulfate (5 x stoichiometric); Biological reduction of chromium using various substrates, including fruit juice, emulsified oil and molasses was found to be highly effective in supporting Cr (VI) reduction.. All substrates studied promoted chromium reduction from 14,000 μg/L to < 10 μg/L within 36 days; Cr(VI) removal with ZVI was shown to be highly effective, Nitrate reduction at nearly 50% was observed followed by diminishing reductions; The coupling of several types of separation technologies with brine treatment for Cr (VI) remediation represents an integrated approach and the selection of technologies has to consider the concentration of Cr (VI), site specific conditions, cost, presence of co-contaminants, and limitations of each technology. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

PtCoO 2 for Scaled Interconnects

Copper (Cu) interconnects are an increasingly important bottleneck in integrated circuits due to energy consumption and latency caused by the notable increase in Cu resistivity as dimensions decrease, primarily due to electron scattering at surfaces. Herein, the potential of a directional conductor, PtCoO 2 , which has a low bulk resistivity and a distinctive anisotropic structure that mitigates electron surface scattering is showcased. Thin films of PtCoO 2 of various thicknesses are synthesized by molecular beam epitaxy (MBE) coupled with a postdeposition annealing process and the superior quality of PtCoO 2 films is demonstrated by multiple characterization techniques. The thickness‐dependent resistivity curve illustrates that PtCoO 2 significantly outperforms effective Cu (Cu with TaN barriers) and Ru in resistivity below 20.0 nm with a more than 6x reduction compared to effective Cu below 6.0 nm, having a value of only 6.32 μΩ cm at 3.3 nm. It is determined that grain boundary scattering can still be improved for even lower resistivities in this material system through a combination of experiments and theoretical simulations. PtCoO 2 is therefore a highly promising alternative material for future interconnect technologies promising lower resistivities, better stability, and significant improvements in energy efficiency and latency for advanced integrated circuits.

Li, Yansong [Department of Electrical Engineering ↗

Lattice Design for PEP-X Ultimate Storage Ring Light Source

SLAC expertise in designing and operating high current storage rings and the availability of the 2.2-km PEP-II tunnel present an opportunity for building a next generation light source - PEP-X - that would replace the SPEAR3 storage ring in the future. The PEP-X 'baseline' design, with 164 pm-rad emittance at 4.5 GeV beam energy and a current of 1.5 A, was completed in 2010. As a next step, a so-called 'ultimate' PEP-X lattice, reducing the emittance to 11 pm-rad at zero current, has been designed. This emittance approaches the diffraction limited photon emittance for multi-keV photons, providing near maximum photon brightness and high coherence. It is achieved by using 7-bend achromat cells in the ring arcs and a 90-m damping wiggler in one of the 6 long straight sections. Details of the lattice design, dynamic aperture, and calculations of the intra-beam scattering effect and Touschek lifetime at a nominal 0.2 A current are presented. Accelerator-based light sources are in high demand for many experimental applications. The availability of the 2.2-km PEP-II tunnel at SLAC presents an opportunity for building a next generation light source - PEP-X - that would replace the existing SPEAR3 light source in the future. The PEP-X study started in 2008, and the 'baseline' design, yielding 164 pm-rad emittance at 4.5 GeV beam energy and a current of 1.5 A, was completed in 2010. This relatively conservative design can be built using existing technology. However, for a long term future, it is natural to investigate a more aggressive, so-called 'ultimate' ring design. The goal is to reduce the electron emittance in both x and y planes to near the diffraction limited photon emittance of 8 pm-rad at hard X-ray photon wavelength of 0.1 nm. This would provide a near maximum photon brightness and significant increase in photon coherence. This study was motivated by the advances in low emittance design at MAX-IV. The latter was used as a starting point for the PEP-X arc lattice, however new features were included into the design for better tuning capabilities and compensation of non-linear optics effects. Further emittance reduction is achieved with a 90-m damping wiggler. Finally, intra-beam scattering (IBS) and Touschek lifetime effects were estimated and cross-checked using various codes.

43 PARTICLE ACCELERATORS↗

Investigation of Mixed Oxide Catalysts for NO Oxidation

The oxidation of engine-generated NO to NO2 is an important step in the reduction of NOx in lean engine exhaust because NO2 is required for the performance of the LNT technology [2], and it enhances the activities of ammonia selective catalytic reduction (SCR) catalysts [1]. In particular, for SCR catalysts an NO:NO2 ratio of 1:1 is most effective for NOx reduction, whereas for LNT catalysts, NO must be oxidized to NO2 before adsorption on the storage components. However, NO2 typically constitutes less than 10% of NOx in lean exhaust, so catalytic oxidation of NO is essential. Platinum has been found to be especially active for NO oxidation, and is widely used in DOC and LNT catalysts. However, because of the high cost and poor thermal durability of Pt-based catalysts, there is substantial interest in the development of alternatives. The objective of this project, in collaboration with partner General Motors, is to develop mixed metal oxide catalysts for NO oxidation, enabling lower precious metal usage in emission control systems. [1] M. Koebel, G. Madia, and M. Elsener, Catalysis Today 73, 239 (2002). [2] C. H. Kim, G. S. Qi, K. Dahlberg, and W. Li, Science 327, 1624 (2010).

diesel oxidation catalyst↗

Significant thermal conductivity reduction of silicon nanowire forests through discrete surface doping of germanium

Silicon nanowires (SiNWs) are promising materials for the realization of highly-efficient and cost effective thermoelectric devices. Reduction of the thermal conductivity of such materials is a necessary and viable pathway to achieve sufficiently high thermoelectric efficiencies, which are inversely proportional to the thermal conductivity. In this article, vertically aligned forests of SiNW and germanium (Ge)-doped SiNW with diameters around 100 nm have been fabricated, and their thermal conductivity has been measured. The results show that discrete surface doping of Ge on SiNW arrays can lead to 23% reduction in thermal conductivity at room temperature compared to uncoated SiNWs. Such reduction can be further enhanced to 44% following a thermal annealing step. By analyzing the binding energy changes of Ge-3d and Si-2p using X-ray photoelectron spectroscopy, we demonstrate that surface doped Ge interacts strongly with Si, enhancing phonon scattering at the Si-Ge interface as has also been shown in non-equilibrium molecular dynamics studies of single nanowires. Overall, our results suggest a viable pathway to improve the energy conversion efficiency of nanowire-forest thermoelectric nanomaterials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrocatalytic Effects of Au Nanoclusters in its Electrochemiluminescence Enhanced by Coreactant Tertiary Amines

Abstract Atomically precise metal nanoclusters are increasingly exploited in electrocatalysis such as water electrolysis and CO 2 reduction. The catalytic effects are generally evaluated by conventional electrochemical methods or end‐product analysis. Herein, near infrared electrochemiluminescence (ECL) of the nanoclusters is introduced as a new signaling mechanism to complement classical voltammetric analysis for elucidating essential electrocatalytic parameters. Coreactant ECL from an aqueous soluble Au 22 nanocluster (NCs) enhanced by a common pH buffer materials 4‐(2‐hydroxyethyl)‐1‐piperazineethanesulfonic acid (HEPES) and by a piperazine drug hydroxyzine (HDZ) is studied under oxidative reduction pathways. Foot of the wave analysis on voltametric features and the kinetics profiles in potential‐step experiments are studied in different nanocluster and coreactant concentrations. Benchmark parameters such as rate constants are determined under EC (Electron‐transfer‐Chemical‐reaction) mechanism as feasibility validations. Because the luminescence properties of AuNCs are sensitive to the surface ligands or adsorbents, ECL is proposed as a new signal readout for operando studies providing insights for governing reaction mechanism and kinetics during catalytic reactions. Retrospectively, mechanistic understanding of the complex multi‐step reactions during ECL generation can provide guidance for the evaluation and optimization of ECL property for better quantitative applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of NHTSA’s Report “Relationships Between Fatality Risk, Mass, and Footprint in Model Year 2003-2010 Passenger Cars and LTVs”

NHTSA recently completed a logistic regression analysis updating its 2003, 2010, and 2012 studies of the relationship between vehicle mass and US fatality risk per vehicle mile traveled (VMT; Kahane 2010, Kahane 2012, Puckett 2016). The new study updates the 2012 analysis using FARS data from 2005 to 2011 for model year 2003 to 2010. Using the updated databases, NHTSA estimates that reducing vehicle mass by 100 pounds while holding footprint fixed would increase fatality risk per VMT by 1.49% for lighter-than-average cars and by 0.50% for heavierthan- average cars, but reduce risk by 0.10% for lighter-than-average light-duty trucks, by 0.71% for heavier-than-average light-duty trucks, and by 0.99% for CUVs/minivans. Using a jack knife method to estimate the statistical uncertainty of these point estimates, NHTSA finds that none of these estimates are statistically significant at the 95% confidence level; however, the 1.49% increase in risk associated with mass reduction in lighter-than-average cars, and the 0.71% and 0.99% decreases in risk associated with mass reduction in heavier-than-average light trucks and CUVs/minivans, are statistically significant at the 90% confidence interval. The effect of mass reduction on risk that NHTSA estimated in 2016 is more beneficial than in its 2012 study, particularly for light trucks and CUVs/minivans. The 2016 NHTSA analysis estimates that reducing vehicle footprint by one square foot while holding mass constant would increase fatality risk per VMT by 0.28% in cars, by 0.38% in light trucks, and by 1.18% in CUVs and minivans.This report replicates the 2016 NHTSA analysis, and reproduces their main results. This report uses the confidence intervals output by the logistic regression models, which are smaller than the intervals NHTSA estimated using a jack-knife technique that accounts for the sampling error in the FARS fatality and state crash data. In addition to reproducing the NHTSA results, this report also examines the NHTSA data in slightly different ways to get a deeper understanding of the relationship between vehicle weight, footprint, and safety. The results of the NHTSA baseline results, and these alternative analyses, are summarized in Table ES.1; statistically significant estimates, based on the confidence intervals output by the logistic regression models, are shown in red in the tables. We found that NHTSA’s reasonable assumption that all vehicles will have ESC installed by 2017 in its baseline regression model slightly increases the estimated increase in risk from mass reduction in cars, but substantially decreases the estimated increase in risk from footprint reduction in all three vehicle types (Alternative 1 in Table ES.1; explained in more detail in Section 2.1 of this report). This is because NHTSA projects ESC to substantially reduce the number of fatalities in rollovers and crashes with stationary objects, and mass reduction appears to reduce risk, while footprint reduction appears to increase risk, in these types of crashes, particularly in cars and CUVs/minivans. A single regression model including all crash types results in slightly different estimates of the relationship between decreasing mass and risk, as shown in Alternative 2 in Table ES.1.

33 ADVANCED PROPULSION SYSTEMS↗

Brown Carbon Fuel and Emission Source Attributions to Global Snow Darkening Effect

Snow and ice albedo reduction due to deposition of absorbing particles (i.e., snow darkening effect (SDE)) warms the Earth system and is largely attributed to black carbon (BC) and dust. Absorbing organic aerosol (BrC) also contributes to SDE but has received less attention due to uncertainty and challenges in model representation. This work incorporates the SDE of absorbing organic aerosol (BrC) from biomass burning and biofuel sources into the Snow Ice and Aerosol Radiative (SNICAR) model within a variant of the Community Earth System Model (CESM). Additionally, 12 different emission regions of BrC and BC from biomass burning and biofuel sources are tagged to quantify the relative contribution to global and regional SDE. BrC global SDE (0.021–0.056 Wm -2 ) is larger than other model estimates, corresponding to 37%–98% of the SDE from BC. When compared to observations, BrC simulations have a range in median bias (-2.5% to +21%), with better agreement in the simulations that include BrC photochemical bleaching. The largest relative contributions to global BrC SDE are traced to Northern Asia (23%–31%), Southeast Asia (16%–21%), and South Africa (13%–17%). Transport from Southeast Asia contributes nearly half of the regional BrC SDE in Antarctica (0.084–0.3 Wm -2 ), which is the largest regional input to global BrC SDE. Lower latitude BrC SDE is correlated with snowmelt, in-snow BrC concentrations, and snow cover fraction, while polar BrC SDE is correlated with surface insolation and snowmelt. This indicates the importance of in-snow processes and snow feedbacks on modeled BrC SDE.

54 ENVIRONMENTAL SCIENCES↗

Nondegenerate n-type doping phenomenon on molybdenum disulfide (MoS{sub 2}) by zinc oxide (ZnO)

Highlights: • We have demonstrated nondegenerate n-type doping phenomenon of MoS{sub 2} by ZnO. • ZnO doping improved the electrical parameters of MoS{sub 2} transistor (I{sub on}↑, μ{sub FE}↑, n↑). • The reduction of ZnO doping effect (ΔV{sub TH}: ∼75% ↓) was observed in air. • The highest photoresponsivity of ZnO-doped MoS{sub 2} photodetector was 3.18 × 10{sup 3} A/W. • The highest detectivity of ZnO-doped MoS{sub 2} photodetector was 5.94 × 10{sup 12} Jones. - Abstract: In this paper, we have demonstrated nondegenerate n-type doping phenomenon of MoS{sub 2} by ZnO. The ZnO doping effects were systematically investigated by Raman spectroscopy and electrical/optical measurements (I{sub D}–V{sub G} with/without exposure to 520, 655, 785, and 850 nm laser sources). The ZnO doping improved the performance parameters of MoS{sub 2}-based electronics (I{sub on}↑, μ{sub FE}↑, n↑) owing to reduction of the effective barrier height between the source and the MoS{sub 2} channel. We also monitored the effects of ZnO doping during exposure to air; reduction in ΔV{sub TH} of about 75% was observed after 156 h. In addition, the optoelectronic performance of the MoS{sub 2} photodetector was enhanced due to the reduction of the recombination rate of photogenerated carriers caused by ZnO doping. In our results, the highest photoresponsivity (about 3.18 × 10{sup 3} A/W) and detectivity (5.94 × 10{sup 12} Jones) of the ZnO-doped photodetector were observed for 520 nm laser exposure.

36 MATERIALS SCIENCE↗

Effects of redox cycling of iron in nontronite on reduction of technetium

In situ technetium-99 ( 99 Tc) immobilization by Fe(II) associated with clay minerals is a potential cost-effective method for Tc remediation at contaminated sites. The oxidation state of Fe is constantly cycled in sedimentary environments, however the effect of this cycle on Tc reduction and immobilization has not yet been investigated. The objective of this project was therefore to study how multiple cycles of reduction-reoxidation of Fe-rich clay mineral, nontronite, affected its reactivity toward Tc (VII) reduction. Iron-rich nontronite NAu-2 was used as a model clay mineral. NAu-2 suspension was first bioreduced by Shewanella putrefaciens CN32, which was subsequently re-oxidized by air. Three cycles of reduction-oxidation were conducted and bioreduced NAu-2 samples from all three cycles were collected and used for Tc(VII) reduction experiments. Each redox cycle resulted in a small fraction of dissolution of small size and/or poorly crystalline NAu-2. The released Fe(II) from the dissolution was likely adsorbed onto NAu-2 surface/edge sites with a high reactivity. Upon exposure to O2, this reactive Fe(II) fraction was oxidized more rapidly than structural Fe(II) and may have accounted for a two-step reoxidation kinetics of NAu-2 associated Fe(II): rapid oxidation over first few hours followed by slow oxidation. Progressive increase of this reactive fraction of Fe(II), from increased dissolution, accounted for the successively higher rate of bioreduction and reoxidation with increased redox cycles. The same Fe redistribution accounted for two-step Tc(VII) reduction kinetics as well. Rapid Tc(VII) reduction in the first few hours may be attributed to a small fraction of highly reactive Fe(II) at the NAu-2 surface/edge sites, and more steady Tc(VII) reduction over longer time may be carried out by structural Fe(II). Similar to the increased rates of Fe(III) reduction and Fe(II) oxidation, the Tc(VII) reduction rate also increased with redox cycles and could be explained by progressive increase of the reactive Fe(II) on NAu-2 surface/edges. Iron-rich clay minerals undergo important changes after redox cycles, but eventually reach a steady state with continued reactivity toward heavy metals.

36 MATERIALS SCIENCE↗

Effects of Low-Carbon Energy Adoption on Airborne Particulate Matter Concentrations With Feedbacks to Future Climate Over California

California plans to reduce emissions of long-lived greenhouse gases (GHGs) through adoption of new energy systems that will also lower concentrations of short-lived absorbing soot contained in airborne particulate matter (PM). Here we examine the direct and indirect effects of reduced PM concentrations under a low-carbon energy (GHG-Step) scenario on radiative forcing in California. Simulations were carried out using the source-oriented WRF/Chem (SOWC) model with 12 km spatial resolution for the year 2054. Furthermore, the avoided aerosol emissions due to technology advances in the GHG-Step scenario reduce ground level PM concentrations by ~8.85% over land compared to the Business-as-Usual (BAU) scenario, but changes to meteorological parameters are more modest. Top-of-atmospheric forcing predicted by the SOWC model increased by 0.15 W m -2 , surface temperature warmed by 0.001 K, and planetary boundary layer height (PBLH) increased by 2.20 cm in the GHG-Step scenario compared to the BAU scenario. PM climate feedbacks are small because the significant changes in ground level PM concentrations associated with the GHG-Step scenario are limited to the first few hundred meters of the atmosphere, with little change for the majority of the vertical column above that level. As an order-of-magnitude comparison, the long-term effects of global reductions in GHG emissions (RCP8.5–RCP4.5) lowered average surface temperature over the California study domain by approximately 0.76 K. The effects of long-lived climate pollutants such as CO 2 are much stronger than the effects of short-lived climate pollutants such as PM soot over California in the year 2054.

54 ENVIRONMENTAL SCIENCES↗

Vibrational stark effects to identify ion pairing and determine reduction potentials in electrolyte-free environments

A recently-developed instrument for time-resolved infrared detection following pulse radiolysis has been used to measure the ν(C≡N) IR band of the radical anion of a CN-substituted fluorene in tetrahydrofuran. Specific vibrational frequencies can exhibit distinct frequency shifts due to ion-pairing, which can be explained in the framework of the vibrational Stark effect. Measurements of the ratio of free ions and ion-pairs in different electrolyte concentrations allowed us to obtain an association constant and free energy change for ion-pairing. As a result, this new method has the potential to probe the geometry of ion-pairing and allows the reduction potentials of molecules to be determined in the absence of electrolyte in an environment of low dielectric constant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A recirculation system for concentrating CO 2 electrolyzer products

Electrochemical carbon dioxide reduction represents a promising path to utilize CO 2 as a feedstock for generating valuable products such as fuels and chemicals. Faradaic efficiencies near 100% have been achieved for certain CO 2 reduction products such as CO, but the electrolyzer outlet streams usually contain large fractions of unreacted CO 2 , dropping the product concentrations below 1% in many cases. The system disclosed here recycles the unreacted CO 2 together with the products and flows them back into the CO 2 reduction reactor, enabling much higher CO 2 conversion rates without dropping the gas flow rate. However, simple recirculation is shown to accumulate significant amounts of hydrogen, impeding effective CO 2 reduction. In this looped system, an electrochemical H 2 pump is placed in series with the CO 2 reactor, which effectively removes all the H 2 from the recycled gas stream, increasing the concentrations of carbon-containing products. Here, the system was initially tested with a CO-generating catalyst and CO concentrations above 70% were achieved in the recycled gas stream, compared to a maximum CO concentration of 8% in single-pass configuration. Results with a CO 2 reactor targeting ethylene as the main product show that ethylene concentrations of at least 10% can be achieved, which is roughly 20 times higher compared to a single-pass system.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Optimization and Directed, Natural Evolution of Biologically-Mediated Chromate Reduction in Subsurface Soil Microcosms (Final Technical Report)

The U.S. Department of Energy (DOE) is faced with the complex challenge of remediating or containing the various mixed wastes present in the subsurface environments of numerous DOE sites. The development of scientifically grounded strategies for the effective management and reclamation of these contaminated sites requires fundamental knowledge on the composition, dynamics, and metabolic potential of indigenous microbial communities, which are of primary importance in the fate and transport of heavy metals and radionuclides in subsurface environments. To date, the complex effect of environmental (both geochemical and biological) parameters on the bioremediative potential of subsurface microbial populations is only partially understood; this is primarily because the majority of microbial ecological studies have focused only on a qualitative analysis of subsurface microbial diversity, while the impact of quantitative changes in microbial communities as a function of environmental factors has been ignored. The project described here directly addresses the need for a more comprehensive, molecular understanding of how microbial growth and activity quantitatively relate to mineral and contaminant biotransformation (Science Element: Subsurface Microbial Ecology and Community, Notice DE-FG02-06ER06-12). The proposed study uses a truly novel combination of standard molecular phylogenetic analyses, rRNA-targeted fluorescence in situ hybridization, and mass spectrometry (MS)-based proteomics to investigate the biological response to experimentally controlled conditions and the concomitant effect on chromate reduction in situ. This response will be characterized in terms of microbial community structure (principally, population number and spatial distribution) and community proteome dynamics. Towards this overarching goal, we will (1) set up aerobic and anaerobic laboratory microcosms derived from subsurface soil collected from a chromate [Cr(VI)]-contaminated DOE site, and introduce Cr(VI)-reducing Pseudomonas putida (a facultative anaerobe) and/or Desulfovibrio desulfuricans (an obligate anaerobe) into the extant microbial community of each microcosm (Objective 1); (2) determine the qualitative and quantitative effects of organic carbon amendments on microcosm community structure, metabolic activity, and, most importantly, biologically-mediated chromate reduction (Objective 2); and (3) investigate the microbial community response from molecular and quantitative perspectives in microcosms challenged with increasing levels of chromate in order to drive selection of chromate-reducing populations (Objective 3). The proposed project is a collaborative endeavor among scientists from Purdue University and Oak Ridge National Laboratory. A unique aspect of this project is the application of shotgun MS techniques as molecular ecology tools for metabolically profiling targeted microbial species within the context of complex environmental communities and searching for unique or abundant proteins that might serve as indicators for heavy metal stress and reduction in microsites. Studies such as this one that tackle the challenge of characterizing the proteome dataset of a complex microbial microcosm will be needed to push the capabilities of current MS methodologies and to develop the next generation of microbial ecology tools of use in assessing bioremediation performance. We expect that the experimental protocols and results generated in this project will expand our quantitative and mechanistic understanding of the in situ biological contributions to metal contaminant transformation.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of Carbon Doping on CO 2 –Reduction Activity of Single Cobalt Sites in Graphitic Carbon Nitride

Single atom catalysts have demonstrated interesting activity in a variety of applications. In this study, we prepared single C o2+ sites on graphitic carbon nitride (C 3 N 4 ), which was doped with carbon for enhanced activity in visible-light CO 2 reduction. The synthesized materials were characterized with a variety of techniques, including microscopy, X-ray powder diffraction, UV-vis spectroscopy, infrared spectroscopy, photoluminescence spectroscopy, and X-ray absorption spectroscopy. Here, doping C 3 N 4 with carbon was found to have profound effect on the photocatalytic activity of the single Co 2+ sites. At relatively low levels, carbon doping enhanced the photoresponse of C 3 N 4 in the visible region and improved charge separation upon photoactivation, thereby enhancing the photocatalytic activity. Furthermore, high levels of carbon doping were found to be detrimental to the photocatalytic activity of the single Co 2+ sites by altering the structure of C 3 N 4 and generating defect sites responsible for charge recombination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of nickel laterite reduction from Pomalaa, Sulawesi Tenggara

The effect of using different reductors in the reduction process of nickel laterite was investigated. In this work, the author conducted the reduction of nickel laterite ores by anthracite coal, lamtoro charcoal, and carbon raiser, in air and CO{sub 2} atmosphere, within the temperature ranged from 800°C and 1000°C. The results indicate that at higher temperatures, the reduction reactions proceed more complete. According to the X-ray powder diffraction (XRD) analysis, the type of carbon used greatly influence the rate of the reduction of nickel laterite. The order of reactivity is anthracite coal, lamtoro charcoal, and carbon raiser, respectively. The reduction atmospheric condition also greatly influences the reduction process. The reduction process in CO{sub 2} atmospheric condition gives a lot of significant decrease in hematite and magnetite presence, means that the reduction reactions proceed more complete compared to the reduction process in the air atmospheric condition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Desorption of Phosphate from Iron-Bearing Soil Minerals by a Plant Secondary Metabolite

In soils, phosphorus readily adsorbs to the surfaces of ubiquitous iron (oxyhydr)oxide minerals, rendering it less accessible to plants and microorganisms. Plants have a number of strategies to access iron, among them the secretion of redox-active metabolites from their roots. Although these strategies likely increase the bioavailability of surface-adsorbed phosphorus through reductive dissolution, their effect on phosphorus cycling has not yet been investigated. We tested the ability of fraxetin, a coumarin-type redox-active metabolite produced by the model plant Arabidopsis thaliana and other dicotyledon plant species, to reductively solubilize phosphate from the surface of ferrihydrite. Our findings show that, at low and neutral pH, fraxetin increased aqueous phosphate concentrations under both oxic and anoxic conditions; at high pH, it was only effective in anoxic experiments. Additionally, a combination of liquid chromatography–mass spectrometry and spectroscopic methods demonstrated substantial fraxetin adsorption to the mineral surface but showed that iron reduction did not alter the mineral structure or change the nature of the chemical environment of the phosphorus atom over short time scales. These results provide evidence that the secretion of redox-active metabolites from roots is likely to be an effective phosphorus acquisition tactic in iron-rich soils.

36 MATERIALS SCIENCE↗