Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Computer simulation of reaction and transport of core-scale serpentinization of Fe-bearing olivine and evolution of geological hydrogen

We present reactive flow and transport simulations of core-scale serpentinization of forsteritic, Fe-bearing olivine under hydrothermal conditions. The model captures fluid flow, evolving porosity–permeability, and redox-controlled H 2 production in a cylindrical core over 55 days at 245 °C and 37 bar. Key processes include olivine dissolution, precipitation of serpentine and magnetite, and oxidation of Fe2+ to Fe 3+ . Here, results show strong coupling among flow velocity, alteration front propagation, and spatially heterogeneous H 2 generation. Elevated H2 concentrations align with inlet-localized magnetite precipitation, consistent with experiments. Secondary mineral formation reduces porosity and permeability, altering transport pathways. Reactive flow at the fluid–solid interface governs H 2 generation rates and distribution. Dissolved SiO2 promotes serpentine and talc formation by suppressing brucite, while bicarbonate extends reaction duration and moderates surface complexation effects.

Geologic hydrogen↗

Computer Simulations of Interstitial Loop Growth Kinetics in irradiated bcc Fe

The growth kinetics of (001) [001] interstitial loops in bcc Fe is studied by phase-field modeling. The effect of defect (vacancy/interstitial) concentration, generation, recombination, sink strength, and elastic interaction on the growth kinetics of interstitial loops is systematically simulated. Results show that the elastic interaction between the defects and interstitial loops speeds up the growth kinetics and affects the morphology of the interstitial loops. Linear growth rate, i.e., the loop average radius is linear to time, under both aging and irradiation are predicted, which is in agreement with experimental observation. The results also show that the interstitial loop growth rate, which is directly related to the sink strength of the interstitial loop for interstitials, increases linearly with the initial interstitial concentration during aging while changing logarithmically with the interstitial generation rate under irradiation.

growth kinetics↗

Computational simulations of [email protected] and [email protected] [email protected] nanotubes

Highlights: • [email protected] nanotubes are easily formed than [email protected] nanotubes. • Armchair [email protected] nanotubes present type-II behavior, while zigzag [email protected] nanotubes present type-I behavior. • The [email protected] had the piezoelectricity response improved until 10% of elongation. - Abstract: The structural, electronic, and mechanical properties of armchair and zigzag chiralities double-walled and [email protected] [email protected] and [email protected] nanotubes were investigated by periodic DFT/B3LYP calculations with an all-electron basis set. For both chiralities, [email protected] presents minor strain and deposition energies, which predict that this nanotube can be easier formed and the GaN is the most favorable substrate (the core) than ZnO. On the other hand, the zigzag [email protected] did not exhibit the major piezoelectric response, which is three times smaller than the [email protected] nanotube, showing that the compression of the [email protected] nanotube length is not favorable to this property. However, the piezoelectricity can be improved when the zigzag [email protected] is under elongation. The elastic constants showed that the [email protected] nanotubes are more rigid than the homogenous nanotubes and present higher piezoelectric constants. In addition, the projected DOS shows that [email protected] has a type-II interface and [email protected] has a type-I interface. Based on the results obtained from our theoretical models, the nanotubes have great potential for the experimental development of new electronic devices.

36 MATERIALS SCIENCE↗

Computer simulation of sputtering at the low index (1 0 0), (1 1 0) and (1 1 1) surfaces of Ni3Al in a STEM

The present study is relevant to the preferential Al sputtering and/or enhancement of the Ni/Al ratio in Ni3Al observed by the scanning transmission electron microscopy fitted with a field emission gun (FEG STEM). Atomic recoil events at the low index (1 0 0), (1 1 0) and (1 1 1) surfaces of Ni3Al through elastic collisions between electrons and atoms are simulated using molecular dynamics (MD) methods. The threshold energy for sputtering, Esp, and adatom creation, Ead, are determined as a function of recoil direction. Based on the MD determined Esp, the sputtering cross-sections for Ni and Al atoms in these surfaces are calculated with the previous proposed model. It is found that the sputtering cross-section for Al atoms is about 7–8 times higher than that for Ni, indicating the preferential sputtering of Al in Ni3Al, in good agreement with experiments. It is also found that the sputtering cross-sections for Ni atoms are almost the same in these three surfaces, suggesting that they are independent of surface orientation. Thus, the sputtering process is almost independent of the surface orientation in Ni3Al, as it is controlled by the sputtering of Ni atoms with a lower sputtering rate.

36 MATERIALS SCIENCE↗

Computer simulation studies of self-assembling macromolecules

Coarse-grained (CG) molecular models are now widely used to understand the structure and functionality of macromolecular self-assembling systems. In the last few years, significant efforts have been devoted to construct quantitative CG models based on data from molecular dynamics (MD) simulations with more detailed all-atom (AA) intermolecular force fields as well as experimental thermodynamic data. We review some of the recent progress pertaining to the MD simulation of self-assembling macromolecular systems, using as illustrations the application of CG models to probe surfactant and lipid self-assembly including liposome and dendrimersome formation as well as the interaction of biomembranes with nanoparticles.

Biochemistry & Molecular Biology↗

Computational simulation of asymmetric phase transformation in cracked Li₇La₃Zr₂O₁₂: Variant selection and chemo-mechanical implications

Coupling between microcracks and phase transformation in ion-conducting ceramics can jointly affect mechanical responses and ion transport. In this work we investigate the cubic-to-tetragonal phase transformation in Li₇La₃Zr₂O₁₂ in the presence of a microcrack under hydrostatic loading and quantify its implications for crack-tip stress concentration and Li-ion transport using phase-field and molecular dynamics simulations. The phase transformation exhibits a strong asymmetry between hydrostatic tension and compression. Under tension, the crack edge nucleates one tetragonal variant that amplifies the crack-tip stress intensity and promotes crack opening. Under compression, the crack tip nucleates a different tetragonal variant that enhances the stress-induced crack-closure tendency. Effective Li diffusivity analysis shows faster transport degradation under compression due to accelerated transformation kinetics, exposing a trade-off between mechanical stability and ionic conductivity. These results highlight the intertwined nature of cracking, phase transformation, and ionic transport in ion-conducting oxides and provide mechanistic insights into chemo-mechanical degradation of solid electrolytes.

36 MATERIALS SCIENCE↗

Energy and cost analysis of a solar-hydrogen combined heat and power system for remote power supply using a computer simulation

A simulation program, based on Visual Pascal, for sizing and techno-economic analysis of the performance of solar-hydrogen combined heat and power systems for remote applications is described. The accuracy of the submodels is checked by comparing the real performances of the system's components obtained from experimental measurements with model outputs. The use of the heat generated by the PEM fuel cell, and any unused excess hydrogen, is investigated for hot water production or space heating while the solar-hydrogen system is supplying electricity. A 5 kWh daily demand profile and the solar radiation profile of Melbourne have been used in a case study to investigate the typical techno-economic characteristics of the system to supply a remote household. The simulation shows that by harnessing both thermal load and excess hydrogen it is possible to increase the average yearly energy efficiency of the fuel cell in the solar-hydrogen system from just below 40% up to about 80% in both heat and power generation (based on the high heating value of hydrogen). The fuel cell in the system is conventionally sized to meet the peak of the demand profile. However, an economic optimisation analysis illustrates that installing a larger fuel cell could lead to up to a 15% reduction in the unit cost of the electricity to an average of just below 90 c/kWh over the assessment period of 30 years. Further, for an economically optimal size of the fuel cell, nearly a half the yearly energy demand for hot water of the remote household could be supplied by heat recovery from the fuel cell and utilising unused hydrogen in the exit stream. Such a system could then complement a conventional solar water heating system by providing the boosting energy (usually in the order of 40% of the total) normally obtained from gas or electricity. (author)

14 SOLAR ENERGY↗

The Mechanism of the Translocation Step in DNA Replication by DNA Polymerase I: A Computer Simulation Analysis

High-fidelity DNA polymerases copy DNA rapidly and accurately by adding correct deoxynucleotide triphosphates to a growing primer strand of DNA. Following nucleotide incorporation, a series of conformational changes translocate the DNA substrate by one base pair step, readying the polymerase for the next round of incorporation. Molecular dynamics simulations indicate that the translocation consists globally of a polymerase fingers-opening transition, followed by the DNA displacement and the insertion of the template base into the preinsertion site. They also show that the pyrophosphate release facilitates the opening transition and that the universally conserved Y714 plays a key role in coupling polymerase opening to DNA translocation. The transition involves several metastable intermediates in one of which the O helix is bent in the vicinity of G711. Completion of the translocation appears to require a gating motion of the O1 helix, perhaps facilitated by the presence of G715. These roles are consistent with the high level of conservation of Y714 and the two glycine residues at these positions. It is likely that a corresponding mechanism is applicable to other polymerases.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrogen Dynamics in Supercritical Water Probed by Neutron Scattering and Computer Simulations

In this work, an investigation of supercritical water is presented combining inelastic and deep inelastic neutron scattering experiments and molecular dynamics simulations based on a machine-learned potential of ab initio quality. The local hydrogen dynamics is investigated at 250 bar and in the temperature range of 553–823 K, covering the evolution from subcritical liquid to supercritical gas-like water. The evolution of libration, bending, and stretching motions in the vibrational density of states is studied, analyzing the spectral features by a mode decomposition. Moreover, the hydrogen nuclear momentum distribution is measured, and its anisotropy is probed experimentally. It is shown that hydrogen bonds survive up to the higher temperatures investigated, and we discuss our results in the framework of the coupling between intramolecular modes and intermolecular librations. Results show that the local potential affecting hydrogen becomes less anisotropic within the molecular plane in the supercritical phase, and we attribute this result to the presence of more distorted hydrogen bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computer Simulation of the Phase Stabilities of Lithiated TiO2 Polymorphs

The structure and phase stability of a series of lithiated titania polymorphs were determined using spin unrestricted density functional theory and the B3LYP exchange-correlation potential. These calculations were performed following the linear combination of atomic orbital approach. The lithium content, x, of the titania phases was varied from 0 to 1. Rutile and anatase were found to be the most stable polymorphs in the absence of lithium. Anatase and ramsdellite were calculated to become energetically favored over rutile upon lithium insertion. The hexagonal, spinel, and rocksalt polymorphs were predicted to have stabilities approaching that of rutile with increasing lithium content. At x=1, the hexagonal, spinel, rocksalt and rutile polymorphs showed essentially equivalent total energies. This prediction is consistent with the experimental observation that rutile electrodes, in particular those that consist of nanomaterials, undergo a phase transformation to the hexagonal, spinel, or rocksalt structure upon lithium insertion. In addition, a set of potential parameters was developed to model lithium insertion with a potential shell model. The potential model was found to give good agreement with the structure and energetics of the lithiated titania polymorphs, as determined with the ab initio calculations, at all lithium contents.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Computational simulation and interpretation of the low-lying excited electronic states and electronic spectrum of thioanisole

Three singlet states, namely a closed-shell ground state and two excited states with 1 ππ* and 1 nσ* character, have been suggested to be responsible for the radiationless decay or photochemical reaction of photoexcited thioanisole. The correct interpretation of the electronic spectrum is critical for understanding the character of these low-lying excited states, but the experimental spectrum is yet to be fully interpreted. In the work reported here, we investigated the nature of those three states and a fourth singlet state of thioanisole using electronic structure calculations by multireference perturbation theory, by completely-renormalized equation-of-motion coupled cluster theory with single and double excitations and noniterative inclusion of connected triples (CR-EOM-CCSD(T)), and by linear-response time-dependent density functional theory (TDDFT). We clarified the assignment of the electronic spectrum by simulating it using a normal-mode sampling approach combined with TDDFT in the Tamm–Dancoff approximation (TDA). The understanding of the electronic states and of the accuracy of the electronic structure methods lays the foundation of our future work of constructing potential energy surfaces.

74 ATOMIC AND MOLECULAR PHYSICS↗

Computer Simulation of the Light Yield Nonlinearity of Inorganic Scintillators

To probe the nature of the physical processes responsible for the nonlinear photon response of inorganic scintillators, we have combined a Monte Carlo (MC) code for calculating the microscopic spatial distributions of electron-hole pairs with a kinetic Monte Carlo (KMC) model of energy-transfer processes. In this publication, we focus on evaluating the contribution of an annihilation mechanism between self-trapped excitons (STE) to the photon response of pure CsI and Ce-doped LaBr3. A KMC model of scintillation mechanisms in pure CsI was developed previously and we introduce in this publication a similar model for Ce-doped LaBr3. We show that the KMC scintillation model is able to reproduce both the kinetics and efficiency of the scintillation process in Ce-doped LaBr3. Relative light output curves were generated at several temperatures for both scintillators from simulations carried out at 2, 5, 10, 20, 100, and 400 keV. These simulations suggest that STE-STE annihilation can account for the initial rise in relative light yield with increasing incident energy. This is due to the fact that the proportion of high-density regions decreases as the incident energy increases thus reducing the likelihood for STE-STE encounter. In addition, the simulations clearly show a lack of temperature dependence of the relative light output, in agreement with a majority of experimental work on the temperature dependence of nonlinearity in inorganic scintillators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗