Search NASA⌕ Search

SEARCH · Search NASA

Results for “corn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Techno-economic assessment and life cycle assessment of three potential pathways for biomass liquefaction

Biomass liquefaction can enhance corn-stover slurry transportation by reducing yield stress and overall viscosity, easing biomass handling, especially for slurries at high solids loading (≥30 % (w/v). Implementing a liquefaction process at the front-end of the biorefinery could reduce downtime caused by equipment fouling. Furthermore, liquefaction reduces process complexity by transforming high fiber mass into a pumpable slurry. Three scenarios for liquefaction of corn stover pellets: enzyme process, enzyme mimetic process, and a combined process of enzyme and enzyme mimetic were assessed. The ideal process will have the best performance-to-cost ratio, with minimal impact on the environment. Techno-economic and life-cycle analyses were used to understand the economic and environmental effects of the three liquefaction scenarios and to determine if one or more can achieve cost parity. Here, results show that the enzyme process had the best performance in terms of cost and emissions (gCO 2 -equivalent/kg slurry)compared to the other scenarios.

09 BIOMASS FUELS↗
DOE OSTI2019

Signatures of Biologically Driven Hemicellulose Modification Quantified by Analytical Pyrolysis Coupled with Multidimensional Gas Chromatography Mass Spectrometry

Biomass storage operation is one major source of feedstock quality variability that impacts on downstream preprocessing, feeding, handling and conversion into biofuels, chemicals and products. In field Ccorn stover biomass bales undergoes degradation and cell wall components modification resulting from microbial biological heating occurring during storage. A molecular characterization of the modification was achieved to unveil and understand the changes of structural cell wall modification in corn stover samples by conducting low temperature (400°C) pyrolysis, comparing samples that were mildly biologicallyun heated to those that had been subjected to microbial severe biological heating (~60°C). Pyrolysis of the samples originating from biomass that had been heated during storage generated small oxygenates such as furfural, 5-methylfurfural and 2-(5H)-furanone with efficiencies that were as much as ten times greater than those measured for the mildly unheated samples. Most of the compounds having enhanced efficiencies were C5 oxygenates, suggesting that the pyrolysis products may be formed from hemicellulosic precursor polymers in the corn stover. The findings suggest that microbial heating may be disrupting the cell wall structure, fragmenting the hemicellulose or cellulose chains, generating more polymer termini that have higher efficiency for generating the oxygenates at lower temperatures. Pyrolysis variability with temperature may be a beneficial strategy for improved biomass cell wall characterization, and for guiding control strategies for enhanced control over product distributions , providing insights to understand and manage the feedstock variability as well as to inform harvest and storage best management practices.

09 BIOMASS FUELS↗
DOE OSTI2021

Controlling Bacterial Contamination During Fuel Ethanol Fermentation Using Thermochemically Depolymerized Lignin Bio-Oils

Lactic acid bacteria (LAB) contamination during fuel ethanol fermentation can lead to significant economic loses. To circumvent this, fuel ethanol plants add antibiotics prophylactically, but their overuse has resulted in the emergence of antibiotic-resistant LAB strains. Lignin is a sustainable biopolymer that can be found as a waste product from lignocellulosic biorefineries. Technical lignins and their smaller phenolic subunits have been shown to exhibit broad-spectrum antimicrobial properties, but there is a lack of demonstrations of lignin derivatives with highly selective properties in the literature. Here, corn stover lignin from a biorefinery was oxidatively depolymerized using an environmentally benign organic oxidant, peracetic acid, into a bio-oil that has selective antimicrobial properties against LAB and not yeasts. The resulting bio-oil demonstrated up to 90% inhibition of commercially sampled LAB (including antibiotic-resistant strains) at 4 mg ml-1 with no inhibition against an industrial yeast strain. These antimicrobial properties of the bio-oil are attributed to larger unidentified lignin oligomers, compared to monolignols, that have a membrane damaging mode of action. Using the bio-oil (4 mg ml-1) during simultaneous saccharification and fermentation (SSF) of raw corn starch showed no inhibition of enzymatic activity, and in LAB contaminated fermentations the bio-oil treatments showed an 8% increase in ethanol yields at higher bacterial contamination ratios (l : 100 yeast to LAB, CFU per ml). This study illustrates the efficacy of using lignin bio-oil as an antibiotic replacement during fuel ethanol fermentation and demonstrates the highly selective antimicrobial properties of lignin oligomers, which creates a viable lignin valorization strategy for biorefineries.

bio-oil↗
DOE OSTI2020

Biopower: Impact of Biofuels Deployment to Replace Petroleum Liquids in Stationary Power Applications

Petroleum-based liquids are used in a portion of power generation applications in the United States, predominantly in the New England, Middle Atlantic, South Atlantic, and Pacific-Noncontiguous regions. Power plants that burn petroleum liquids, such as distillate or residual fuel oils, are generally used for short periods to accommodate peak electricity demands. The Energy Information Administration (EIA) estimated the U.S. consumption of petroleum liquids for electricity generation at 27 million barrels in 2018, representing a cost of $2.4 billion annually. This study assesses the potential to displace all or part of the petroleum liquids in U.S. power generation with biofuels. The biofuels for this application are assumed to be derived from terrestrial feedstocks, with conversion routes of both fast pyrolysis (bio-oil) and hydrothermal liquefaction (bio-crude). Regional models were used to assess the availability and cost of three different base materials: clean wood, forest residues, and corn stover; each was evaluated in the laboratory at small or experimental scales for conversion to bio-oil or bio-crude. The estimated biofuel production quantities depend on equivalent heating versus the current heavy fuel. In this report, the availability of each type of biomass for each section of the U.S. Census division is estimated using a conservative broker price (in each case) of $ 80 per dry tonne. The results show that the petroleum-liquid power generation in each of the Census Divisions could be supplied by one or more of the feedstocks evaluated. For all regions, clean wood supplies (only) could provide ample supply. For all but two regions (Middle Atlantic and New England), forest residues alone are sufficient. Finally, for all regions but three (Middle Atlantic, New England, and South Atlantic), corn stover alone is adequate. The Minimum Fuel Selling Price (MFSP) of bio-oil and bio-crude were also estimated for each feedstock type and Census Division. This analysis showed that fast pyrolysis bio-oil projections to be lower (14% on average) than current wholesale petroleum-based heating oil prices in each of the regions, assuming 100 dry tonnes/day processing capacity. However, bio-crude predictions were significantly higher (2X) in all cases. The effect of biorefinery size was also quantified. Based on the preliminary results in this study, it is apparent the biofuels could be an economical alternative for current petroleum liquids in U.S. power generation. However, additional research is needed to determine the necessary biofuel characteristics to support existing generation equipment. It is recommended that both power generation and biofuel production stakeholders to be engaged to outline the research and testing needed to identify the technical hurdles to enable the opportunity.

02 PETROLEUM↗
DOE OSTI2022

Gasification of Coal and Biomass: The Route to Net-Negative-Carbon Power and Hydrogen

One promising process that is a candidate for meeting the goals of the US Department of Energy’s 21st Century Power Plant initiative is to gasify a mixture of coal and biomass to yield a syngas, which can have CO2 removed and then be used to produce hydrogen as well as an off-gas that can be used to flexibly produce power. This concept would overall be carbon net-negative and readily meet the 21st Century Power Plant initiative targets of smaller scale MW generation, high ramp rates and turndown, feedstock flexibility, and high efficiency—at a reasonable cost. Moreover, adding the large-scale production of “ultra-green” hydrogen yields a system tailored for the coming hydrogen economy, providing long-term energy storage and an attractive co-product for sale. The objective of the work being led by the Electric Power Research Institute, Inc. (EPRI), with support by Bechtel Corporation (Bechtel), Gas Technology Institute (GTI), Hamilton Mauer International, Inc. (HMI), Nebraska Public Power District (NPPD), NexantECA, Inc. (Nexant), and Wärtsilä, is to perform a front-end design and engineering (FEED) study on an oxygen-blown gasification system coupled with water-gas shift, pre-combustion CO2 capture, and pressure-swing adsorption working off a coal/biomass mix to yield high-purity hydrogen and a fuel off-gas that can generate power. Several designs are being considered that will be capable of producing 50 MW net from a flexible generator, over 8500 kg/hr of hydrogen, and net-negative CO2 emissions, at an efficiency of 50% net HHV. The plant would be hosted at an NPPD site, where opportunities for enhanced oil recovery and sequestration have been investigated and the need for low-carbon power and hydrogen is imminent. The principal biomass to be used is corn stover—prevalent in Nebraska where the plant will be located—mixed with Powder River Basin (PRB) coal, necessitating a gasifier that can use this feedstock and be flexible to allow other types. Waste plastics will also be reviewed for use. Two oxygen-blown gasifiers have been identified as candidates that have done testing with biomass including corn stover: the GTI gasifier—a high-pressure, fluidized-bed type—and HMI’s, a lower pressure moving-bed type. Both have relative advantages that are being investigated in the Phase I design study, with a resultant down select of one system for which the FEED will be performed in Phase II. The technical tasks for the proposed project are: • Design Development: Completion of design activities necessary to provide inputs for the FEED study. Multiple design cases will be assessed with the selection of the optimal one for the FEED. • Investment Case Preparation: Development of the draft investment case for the proposed process with business cases performed for the proposed host site and two other locations. • Host Site Selection: Evaluation of the two potential host sites within NPPD’s portfolio to select the preferred candidate based on technical, economic, and environmental considerations. • Environmental Information Volume (EIV) Development: Completion of the EIV for the host site. • FEED Study: Completion of a FEED study based on the design selected in Phase I. A Greenhouse Gas Life Cycle Analysis will also be performed for the process. • Update Investment Case: Finalization of the investment case based on findings from the FEED. The advantages of the proposed project are significant. Having an engaged U.S. power utility willing to provide a host site that will produce energy from coal plus a deep and experienced team is critical; the process meets all the goals of DOE’s 21st Century Power Plant initiative at an estimated total plant cost of ~$880M and a production cost of hydrogen of ~$2/kg-H2 while producing net-negative carbon power. If developed, this process has real commercial potential in the United States—supported by EPRI’s initial review of the considerable interest from selected U.S. utilities—and elsewhere around the globe. The process has fewer environmental hurdles compared to other concepts, lowering regulatory and protest risks—providing a pathway to preserving the viability of a critical indigenous energy source by transforming its use to match a changing world. This presentation will outline the motivation for the effort, summarize project plans, work completed to date, results of the Design Development task, and detailed work scope for the remainder of the project.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Gasification of Coal and Biomass: The Route to Net-Negative-Carbon Power and Hydrogen

One promising process that is a candidate for meeting the goals of the US Department of Energy’s 21st Century Power Plant initiative is to gasify a mixture of coal and biomass to yield a syngas, which can have CO2 removed and then be used to produce hydrogen as well as an off-gas that can be used to flexibly produce power. This concept would overall be carbon net-negative and readily meet the 21st Century Power Plant initiative targets of smaller scale MW generation, high ramp rates and turndown, feedstock flexibility, and high efficiency—at a reasonable cost. Moreover, adding the large-scale production of “ultra-green” hydrogen yields a system tailored for the coming hydrogen economy, providing long-term energy storage and an attractive co-product for sale. The objective of the work being led by the Electric Power Research Institute, Inc. (EPRI), with support by Bechtel Corporation (Bechtel), Gas Technology Institute (GTI), Hamilton Mauer International, Inc. (HMI), Nebraska Public Power District (NPPD), NexantECA, Inc. (Nexant), and Wärtsilä, is to perform a front-end design and engineering (FEED) study on an oxygen-blown gasification system coupled with water-gas shift, pre-combustion CO2 capture, and pressure-swing adsorption working off a coal/biomass mix to yield high-purity hydrogen and a fuel off-gas that can generate power. Several designs are being considered that will be capable of producing 50 MW net from a flexible generator, over 8500 kg/hr of hydrogen, and net-negative CO2 emissions, at an efficiency of 50% net HHV. The plant would be hosted at an NPPD site, where opportunities for enhanced oil recovery and sequestration have been investigated and the need for low-carbon power and hydrogen is imminent. The principal biomass to be used is corn stover—prevalent in Nebraska where the plant will be located—mixed with Powder River Basin (PRB) coal, necessitating a gasifier that can use this feedstock and be flexible to allow other types. Waste plastics will also be reviewed for use. Two oxygen-blown gasifiers have been identified as candidates that have done testing with biomass including corn stover: the GTI gasifier—a high-pressure, fluidized-bed type—and HMI’s, a lower pressure moving-bed type. Both have relative advantages that were investigated in the Phase I design study, with a resultant down select of one system for which the FEED will be performed in Phase II. The technical tasks for the project are: • Design Development: Completion of design activities necessary to provide inputs for the FEED study. Multiple design cases will be assessed with the selection of the optimal one for the FEED. • Investment Case Preparation: Development of the draft investment case for the proposed process with business cases performed for the proposed host site and two other locations. • Host Site Selection: Evaluation of the two potential host sites within NPPD’s portfolio to select the preferred candidate based on technical, economic, and environmental considerations. • Environmental Information Volume (EIV) Development: Completion of the EIV for the host site. • FEED Study: Completion of a FEED study based on the design selected in Phase I. A Greenhouse Gas Life Cycle Analysis will also be performed for the process. • Update Investment Case: Finalization of the investment case based on findings from the FEED. The advantages of the proposed project are significant. Having an engaged U.S. power utility willing to provide a host site that will produce energy from coal plus a deep and experienced team is critical; the process meets all the goals of DOE’s 21st Century Power Plant initiative at an estimated total plant cost of ~$880M and a production cost of hydrogen of ~$2/kg-H2 while producing net-negative carbon power. If developed, this process has real commercial potential in the United States—supported by EPRI’s initial review of the considerable interest from selected U.S. utilities—and elsewhere around the globe. The process has fewer environmental hurdles compared to other concepts, lowering regulatory and protest risks—providing a pathway to preserving the viability of a critical indigenous energy source by transforming its use to match a changing world. This presentation outlines the motivation for the effort, summarizes project plans, work completed to date, results of the Phase I effort and, and detailed work scope for the remainder of the project in the Phase II FEED effort.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Bird Species Use of Bioenergy Croplands in Illinois, USA—Can Advanced Switchgrass Cultivars Provide Suitable Habitats for Breeding Grassland Birds?

Grassland birds have sustained significant population declines in the United States through habitat loss, and replacing lost grasslands with bioenergy production areas could benefit these species and the ecological services they provide. Point count surveys and autonomous acoustic monitoring were used at two field sites in Illinois, USA, to determine if an advanced switchgrass cultivar that is being used for bioenergy feedstock production could provide suitable habitats for grassland and other bird species. At the Brighton site, the bird use of switchgrass plots was compared to that of corn plots during the breeding seasons of 2020–2022. At the Urbana site, the bird use of restored prairie, switchgrass, and Miscanthus × giganteus was studied in the 2022 breeding season. At Brighton, Common Yellowthroat, Dickcissel, Grasshopper Sparrow, and Sedge Wren occurred on switchgrass plots more often than on corn; Common Yellowthroat and Dickcissel increased on experimental plots as the perennial switchgrass increased in height and density over the study period; and the other two species declined over the same period. At Urbana, Dickcissel was most frequent in prairie and switchgrass; Common Yellowthroat was most frequent in miscanthus and switchgrass. These findings suggest that advanced switchgrass cultivars could provide suitable habitats for grassland birds, replace lost habitats, and contribute to the recovery of these vulnerable species.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2015

Relative Water Content, Bidirectional Reflectance and Bidirectional Transmittance of the Interior of Detached Leaves During Dry Down.

Remotely sensing the water status of plants and the water content of canopies remain long-term goals of remote sensing research [1]. Estimates of canopy water content commonly involve measurements in the 900nm to 2000nm portion of the optical spectrum [1]. We have used optical polarization techniques to remove leaf surface reflection and to demonstrate that the visible light reflected by the interior of green healthy corn leaves measured in situ inversely depends upon the leaf relative water content (RWC) [2]. In the research reported here, we again used optical polarization techniques in order to remove the leaf surface reflection from our measurements. This allowed us to monitor the interiors of detached corn leaf samples during leaf dry down measuring for each sample the RWC, bidirectional spectral reflectance and bidirectional spectral transmittance over the wavelength range 450nm to 2,500nm. Our new results like our earlier results show light scattered by the leaf interior measured in the visible wavelength region generally increased as leaf RWC decreased. However, the spectral character and the much improved signal noise of our new results shows the RWC-linked visible light scattering changes are due to leaf structural changes. Our new results show that scattering changes that occur with changing leaf RWC are not attributable to molecular configuration changes in cellular pigments.

Corn↗
NASA NTRS2021

USA Crop Yield Estimation with MODIS NDVI: Are Remotely Sensed Models Better Than Simple Trend Analyses?

Crop yield forecasting is performed monthly during the growing season by the United States Department of Agriculture’s National Agricultural Statistics Service. The underpinnings are long-established probability surveys reliant on farmers’ feedback in parallel with biophysical measurements. Over the last decade though, satellite imagery from the Moderate Resolution Imaging Spectroradiometer (MODIS) has been used to corroborate the survey information. This is facilitated through the Global Inventory Modeling and Mapping Studies/Global Agricultural Monitoring system, which provides open access to pertinent real-time normalized difference vegetation index (NDVI) data. Hence, two relatively straightforward MODIS-based modeling methods are employed operationally. The first model constitutes mid-season timing based on the maximum peak NDVI value, while the second is reflective of late-season timing by integrating accumulated NDVI over a threshold value. Corn model results nationally show the peak NDVI method provides a R^(2) of 0.88 and a coefficient of variation (CV) of 3.5%. The accumulated method, using an optimally derived 0.58 NDVI threshold, improves the performance to 0.93 and 2.7%, respectively. Both these models outperform simple trend analysis, which is 0.48 and 7.4%, correspondingly. For soybeans the R^(2) results of the peak NDVI model are 0.62, and 0.73 for the accumulated using a 0.56 threshold. CVs are 6.8% and 5.7%, respectively. Spring wheat’s R2performance with the accumulated NDVI model is 0.60 but just 0.40 with peak NDVI. The soybean and spring wheat models perform similarly to trend analysis. Winter wheat and upland cotton show poor model performance, regardless of method. Ultimately, corn yield forecasting derived from MODIS imagery is robust, and there are circumstances when forecasts for soybeans and spring wheat have merit too.

crop yield↗
DOE OSTI2023

Direct Conversion of Delignified Biomass into Non-Volatile Products Using Thermophilic Bacteria

Butyric acid (BA) can be used as a platform intermediate for diesel and sustainable aviation fuels (SAFs) as well as a precursor for diverse commodity chemicals for the production of polymers, fibers, solvents, and preservatives. This work presents a co-culture-based bioprocess for the production of BA from corn stover by two thermophilic bacteria, Clostridium thermocellum, a well-known efficient degrader of insoluble and oligomeric cellulosic substrates, and Clostridium thermobutyricum, a highly efficient BA producer from monomeric sugars. First, we tested the capability of C. thermocellum to deconstruct three different biomass streams from the NREL pilot plant pretreatment process -raw, deacetylated, and deacetylated and mechanically refined corn stover (DMR)-, and up to 82% solids deconstruction and 91% carbohydrate utilization were obtained when using DMR solids. Then, the sugar utilization and by-product formation capabilities on various substrates by C. thermobutyricum were compared to evaluate its potential as a co-culture partner for C. thermocellum. Model carbon sources -glucose and xylose- were compared to a mixture of substrates present in soluble DMR hydrolysate streams, and the highest cell density as well as the maximum BA titer (8.3 g/L) were observed on DMR hydrolysate. Finally, clostridial co-cultivations on DMR solids were performed to investigate the inoculation time for both organisms that enhances BA production; while C. thermocellum was always inoculated at the beginning of the cultivation, C. thermobutyricum was inoculated at 0, 36, or 72h. It was found that BA production begins immediately upon inoculation of C. thermobutyricum regardless of the inoculation time. However, higher solids deconstruction and carbohydrate utilization results (83.7 and 95.6%, respectively) were obtained when both organisms were inoculated at the beginning of the fermentation. Under those conditions, up to 2.6 g/L of BA were obtained from DMR solids after 120h of cultivation. This work provides relevant information for the sustainable production of BA using thermophilic bacteria.

bacterial co-culture↗
DOE OSTI2023

Fractionation of Lignocellulosic Biomass into High-Value Products - CRADA Report

Idaho National Laboratory (INL) has developed a process for adding value in the biomass feedstock supply chain. The key aspects of this process include: (1) anaerobic and chemical treatment of biomass during storage, (2) fractionation of biomass into conversion-ready feedstock and high-value coproducts, and (3) high-moisture pelleting to increase the bulk density and stabilize the feedstock. The purpose of the chemical treatment is to overcome the recalcitrant nature of the feedstock to improve the biochemical conversion process of breaking down the biomass into sugars. To maximize the utilization of the biomass, the feedstock can be fractionated into hemicellulose and lignin rich fractions. Finally, to increase the materials overall energy density, produce a shelf-stable material, and to facilitate transport, the feedstock is densified in a pelleting process. The first two steps of the processes have been verified at bench scale showing an improvement in theoretical glucose yield from 23.1% to 44.5% and an improvement in theoretical xylose yield from 8.9% to 23.1% from ground corn stover. It is hypothesized that densification will further increase the carbohydrate yield in the sample. The goal of this project was to evaluate the technical feasibility and process economics of the above process and to provide preliminary data to Golden Leaf Energy, Inc to access its potential commercialization for converting biomass to ethanol and renewable chemicals. Corn stover (CS), the largest available agricultural residue, and Chinese tallow (CT), an invasive wood species with no current commercial value, were chosen as feedstocks for this project.

09 BIOMASS FUELS↗
DOE OSTI2025

A Data-Driven Framework for Predicting the Sorting and Screening Performance of an Integrated Biomass Feedstock Preprocessing System

The characteristics of mechanically sorted and screened lignocellulosic biomass, such as the mass contents of corn stover anatomical fractions (leaves, husks, stalks, cobs, etc.), can be used to calculate the intermediate feedstock quality attributes “yield” and “purity” that indicate the conversion efficiency of biocrude. No prior study has investigated the correlations from the characteristics of raw biomass and preprocessing unit operation parameters to those intermediate feedstock quality attributes. This work presents a data-driven framework for assessing and predicting the intermediate feedstock quality attributes in an integrated biomass feedstock preprocessing system. Our study used corn stover as a typical type of herbaceous biomass because of its abundance in the U.S. It began with data acquisition of moisture content, particle size distribution, and anatomical fractions of the materials after each unit operation in the system. The objective of this preprocessing system is to minimize husks and leaves and maximizing cobs and stalks by mechanically separating the materials into three streams via disc screen and air separator. Prototype neural network models were then developed to evaluate the feasibility of predicting process outcomes based on measurable parameters. It is found that incorporating physical constraints into these prediction models significantly enhances the accuracy of the predicted yield and purity against the ground truth data. The experimental data and model predictions indicate that decreasing throughput increases purity, while higher throughput results in lower purity. Finally, an optimization problem was introduced to search optimal combinations of feed material properties and preprocessing unit operation parameters, as the intermediate feedstock quality attributes – yield and purity, appeared to be competing factors. The study also suggests the continual need to improve the data-driven framework’s predictability by incorporating more accurate physical models to describe the dynamics in the preprocessing units such as the air separator.

09 - BIOMASS FUELS↗
DOE OSTI2020

Loamy sand soil approaches organic carbon saturation after 37 years of conservation tillage

Conservation tillage is reported to increase soil organic carbon (SOC) and total nitrogen (TN) contents, but long-term (>30 yr) field results quantifying the responses in Coastal Plain Ultisols are sparse. The distribution, accumulation, and topsoil storage of SOC and TN after 37 yr of crop production using conventional (CvT) or conservation tillage (CnT) on a Norfolk loamy sand (fine-loamy, kaolinitic, thermic, Typic Kandiudults) were quantified. Soil samples were collected annually from the 0-5-, 5-10-, and 10-15-cm depth increments beneath corn (Zea mays L.), soybean [Glycine max (L.) Merr.], and cotton (Gossypium hirsutum L.) crops. Overall, SOC and TN accumulation in the 0-5-cm depth were highest for Norfolk soil under CnT. Focusing on total long-term changes for the 0-15-cm sampling depth beneath various corn crops shows that CnT and CvT sequestered 24.7 and 21.4 Mg C ha -1 , respectively. Between 1978 and 2016, there was a highly significant (P < .0001) exponential increase in SOC within the top 5-cm soil depth. However, the exponential curves began to plateau suggesting the Norfolk topsoil was approaching its organic carbon (OC) storage capacity. These field measurements strongly indicate that additional topsoil SOC increases with current tillage and crop management practices are limited.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Briquetting characteristics of woody and herbaceous biomass blends: Impact on physical properties, chemical composition, and calorific value

Abstract Intercropping (or polyculture) is gaining a lot of interest as it increases yields, allows better utilization of resources (water and nutrients), and provides better land management. The objective of this study is to understand the briquetting characteristics of woody and herbaceous biomass blends, which might result from intercropping. Tests were conducted on blends of lodgepole pine, switchgrass, and corn stover biomass using three hammer mill screen sizes (i.e., 4.8, 12.7, and 19.05 mm), three blend moistures (12%, 15%, and 18%, w.b.), and two‐ and three‐blend ratios (i.e., 1:1 and 1:1:1) using a pilot‐scale hydraulic briquette press. The briquette properties, such as unit and bulk density, durability rating after 5 days of storage (as they tend to attain stable density), and the energy consumption of the process were measured. The results indicate that moisture content of 12% and 15% (w.b.) and smaller hammer mill screen size of 4.8 mm increased the unit and bulk densities to >750 and >430 kg/m 3 and moisture content (15% and 18% (w.b.)) and hammer mill screen size of 12.7 and 19.05 mm produced briquettes with durability rating values of >95%. The higher moisture content of 18% (w.b.) and the hammer mill screen size of 12.7 and 19.05 mm had the highest energy consumption. The proximate and ultimate analysis showed that energy content improved by blending lodgepole pine with both corn stover and switchgrass and also showed increased calorific value and reduced ash content. Scanning electron microscopy micrographs showed interlocking of particles and cracks in the briquettes. © 2020 Society of Chemical Industry and John Wiley & Sons, Ltd

Tumuluru, Jaya Shankar↗
DOE OSTI2022

Techno-economic analysis of cellulosic ethanol conversion to fuel and chemicals

In this paper, we describe multiple scenarios investigated to assess the techno-economic results of producing fuels from corn stover-derived ethanol and the impact of co-producing higher-value, ethanol-derived n-butanol and 1,3-butadiene to improve economic feasibility. An alternative approach that produces only chemicals from the lignocellulosic-derived ethanol while producing fuels from the residual cell mass, unconverted sugars and lignin using hydrothermal liquefaction and hydrotreating also is described. Our results indicate that the hydrothermal liquefaction pathway has cost advantages relative to pathways that burn lignin from the corn stover conversion process to make ethanol when the associated ethanol stream is used to make only chemicals.

09 BIOMASS FUELS↗
DOE OSTI2022

Identification of quantitative trait loci for sorghum leaf blight resistance

Sorghum leaf blight and northern corn leaf blight, both caused by Exserohilum turcicum {(Pass.) K. J. Leonard and Suggs [syn. Setosphaeria turcica (Luttr.) K. J. Leonard and Suggs.]}, are major diseases of sorghum [Sorghum bicolor (L.) Moench] and maize (Zea mays L.), respectively. Examining the genetic architecture of resistance in sorghum will lead to a better understanding of the relationship between resistance in sorghum and maize, which can ultimately enhance management options in both crops. In 2018 and 2019, we evaluated two sorghum recombinant inbred line (RIL) populations for resistance to E. turcicum. The BTx623 × IS3620C and BTx623 × SC155 populations consisted of 235 and 81 RILs, respectively. Resistance in both populations was moderately to highly heritable. We identified a total of six quantitative trait loci (QTL) across the two populations. Three QTL with small- to moderate-effect sizes were identified in the BTx623 × IS3620C population. Three QTL, including a large-effect QTL on chromosome three that explained 24% of the variation, were identified in the BTx623 × SC155 population. We compared the identified QTL with the position of northern corn leaf blight candidate genes and found eight candidate resistance gene orthologs that colocalize with the sorghum leaf blight QTL. There were also several nucleotide-binding leucine-rich repeat encoding genes within the candidate intervals. Understanding host resistance in multiple species furthers our understanding of the Exserohilum turcicum patho-system.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

No–till establishment improves the climate benefit of bioenergy crops on marginal grasslands

Expanding biofuel production is expected to accelerate the conversion of unmanaged marginal lands to meet biomass feedstock needs. Greenhouse gas production during conversion jeopardizes the ensuing climate benefits, but most research to date has focused only on conversion to annual crops and only following tillage. Here we report the global warming impact of converting USDA Conservation Reserve Program (CRP) grasslands to three types of bioenergy crops using no–till (NT) vs. conventional tillage (CT). We established replicated NT and CT plots in three CRP fields planted to continuous corn, switchgrass, or restored prairie. For the 2 yr following an initial soybean year in all fields, we found that, on average, NT conversion reduced nitrous oxide (N 2 O) emissions by 50% and CO 2 emissions by 20% compared with CT conversion. Differences were higher in Year 1 than in Year 2 in the continuous corn field, and in the two perennial systems the differences disappeared after Year 1. In all fields net CO 2 emissions (as measured by eddy covariance) were positive for the first 2 yr following CT establishment, but following NT establishment net CO 2 emissions were close to zero or negative, indicating net C sequestration. Overall, NT improved the global warming impact of biofuel crop establishment following CRP conversion by over 20–fold compared with CT (–6.01 Mg CO 2 e ha –1 yr –1 for NT vs. –0.25 Mg CO 2 e ha –1 yr –1 for CT, on average). We also found that Intergovernmental Panel on Climate Change estimates of N 2 O emissions (as measured by static chambers) greatly underestimated actual emissions for converted fields regardless of tillage. Policies should encourage adoption of NT for converting marginal grasslands to perennial bioenergy crops to reduce C debt and maximize climate benefits.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Sustainable Supply Chains by Integrating Life Cycle Modeling and Techno-Ecological Synergy with Application to Mitigation of Harmful Algal Blooms

Harmful algal blooms (HABs) are a challenge in water bodies across the planet and are often caused by fertilizer runoff from intensively farmed lands. This chapter describes a framework by which producers of biomass-based products could manage their supply chain to encourage mitigation of HABs and their life cycle environmental impacts, while also considering economic implications. The emphasis is on corn-based products such as ethanol in the region around Lake Erie in Northwest Ohio. It shows how wetland ecosystems could be designed synergistically with farming practices, transportation of the corn, and conversion and use of ethanol. The resulting techno-ecologically synergistic supply chains can be environmentally and economically superior to conventional techno-centric supply chains. The resulting designs can help ethanol manufacturers choose between farms, encourage farmers to adopt wetland ecosystems for intercepting and mitigating nutrient runoff, and determine the location of biorefineries for optimizing environmental and economic objectives.

air quality regulation↗