Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Analysis of Photothermal Characterization of Layered Materials: Design of Optimal Experiments

In this paper numerical calculations are presented for the steady-periodic temperature in layered materials and functionally-graded materials to simulate photothermal methods for the measurement of thermal properties. No laboratory experiments were performed. The temperature is found from a new Green s function formulation which is particularly well-suited to machine calculation. The simulation method is verified by comparison with literature data for a layered material. The method is applied to a class of two-component functionally-graded materials and results for temperature and sensitivity coefficients are presented. An optimality criterion, based on the sensitivity coefficients, is used for choosing what experimental conditions will be needed for photothermal measurements to determine the spatial distribution of thermal properties. This method for optimal experiment design is completely general and may be applied to any photothermal technique and to any functionally-graded material.

Cole, Kevin D.↗
NASA NTRSDate not supplied

Joint Spectrum Access and Power Control in Air-Air Communications - A Deep Reinforcement Learning Based Approach

This paper considers the dynamic spectrum access and power control problem in a single-hop point-to-point Air-Air Communication Network (AACN). Due to spectrum scarcity, we assume the number of Aircraft-to-Aircraft (A2A) communication links is greater than that of the available channels, such that some communication links need to share the same channel, causing co-channel interference. We formulate the joint channel selection and power control optimization problem to maximize the Weighted Sum Spectral Efficiency (WSSE). A distributed and dynamic deep Q learning-based algorithm is proposed to find the optimal solution. Specifically, we design two different policies that are trained by conducting a trial-and-error scheme. Each communication link can achieve the optimal policy by exploiting the local information from its neighbors, and this distributive approach make it scalable to large networks. Finally, our experimental results demonstrate the effectiveness of the proposed solution in various AACN scenarios.

Zhe Wang↗
NASA NTRSDate not supplied

Joint Spectrum Access and Power Control in Air-Air Communications - A Deep Reinforcement Learning Based Approach

This paper considers the dynamic spectrum access and power control problem in a single-hop point-to-point Air-Air Communication Network (AACN). Due to spectrum scarcity, we assume the number of Aircraft-to-Aircraft (A2A) communication links is greater than that of the available channels, such that some communication links need to share the same channel, causing co-channel interference. We formulate the joint channel selection and power control optimization problem to maximize the Weighted Sum Spectral Efficiency (WSSE). A distributed and dynamic deep Q learning-based algorithm is proposed to find the optimal solution. Specifically, we design two different policies that are trained by conducting a trial-and-error scheme. Each communication link can achieve the optimal policy by exploiting the local information from its neighbors, and this distributive approach make it scalable to large networks. Finally, our experimental results demonstrate the effectiveness of the proposed solution in various AACN scenarios.

Zhe Wang↗
DOE OSTI2025

New Results on Communication- and Memory-Aware Load Balancing Model and Algorithms

While load balancing in distributed-memory computing has been well-studied, we present an innovative approach to this problem: a unified, reduced-order model that combines three key components to describe “work” in a distributed system: computation, communication, and memory. Our model enables an optimizer to explore complex tradeoffs in task placement, such as augmented parallelism, at the expense of data replication increasing memory usage. We propose a fully distributed, heuristic-based load balancing optimization algorithm, and demonstrate that it quickly finds close-to-optimal solutions. We formalize the complex optimization problem as a mixed-integer linear program, and compare it to our strategy. Finally, we show that when applied to an electromagnetics code, our approach obtains up to 2.3x speedups for the imbalanced execution.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2019

Adjoint-Based Design of a Distributed Propulsion Concept with a Power Objective

The adjoint-based design capability in FUN3D is extended to allow efficient gradient-based optimization and design of concepts with highly integrated and distributed aero-propulsive systems. Calculations of propulsive power, along with the derivatives needed to perform adjoint-based design, have been implemented in FUN3D. The design capability is demonstrated by the shape optimization and propulsor sizing of NASA’s PEGASUS aircraft concept. The optimization objective is the minimization of flow power at the aerodynamic interface planes for the wing-mounted propulsors, as well as the tail-cone boundary layer ingestion propulsor, subject to vehicle performance and propulsive constraints.

Ordaz, Irian↗
NASA NTRS2004

Optimal Synthesis of Compliant Mechanisms using Subdivision and Commercial FEA (DETC2004-57497)

The field of distributed-compliance mechanisms has seen significant work in developing suitable topology optimization tools for their design. These optimal design tools have grown out of the techniques of structural optimization. This paper will build on the previous work in topology optimization and compliant mechanism design by proposing an alternative design space parameterization through control points and adding another step to the process, that of subdivision. The control points allow a specific design to be represented as a solid model during the optimization process. The process of subdivision creates an additional number of control points that help smooth the surface (for example a C(sup 2) continuous surface depending on the method of subdivision chosen) creating a manufacturable design free of some traditional numerical instabilities. Note that these additional control points do not add to the number of design parameters. This alternative parameterization and description as a solid model effectively and completely separates the design variables from the analysis variables during the optimization procedure. The motivation behind this work is to create an automated design tool from task definition to functional prototype created on a CNC or rapid-prototype machine. This paper will describe the proposed compliant mechanism design process and will demonstrate the procedure on several examples common in the literature.

Hull, Patrick V.↗
NASA NTRSDate not supplied

Low-Noise Propeller Design with the Vortex Lattice Method and Gradient-Based Optimization

This work aims to combine an aerodynamic model based on the unsteady vortex lattice method with an acoustic model provided by Farassat’s formulation 1A to perform gradient-based propeller optimizations with aerodynamic and acoustic constraints. Two optimization cases are attempted and successfully converged: an isolated propeller and a propeller-wing configuration, both operating in a 0.11 Mach freestream, representative of a cruise condition. The results show that simultaneously decreasing the RPM and increasing the collective angle of a propeller is an effective noise reduction technique, as expected, and little difference is observed between the two cases. A vortex dissipation model was found to be needed to stabilize the derivatives of the vortex lattice outputs, and a constraint on the propeller blade’s chord distribution concavity was needed to produce realistic-looking blade chord distributions.

Propellers↗
DOE OSTI2025

Electron density profile and associated fluctuation measurements using a microwave reflectometry diagnostic on Helically Symmetric eXperiment (HSX)

Abstract A dual-band frequency-modulated reflectometry is employed on the Helically Symmetric eXperiment (HSX) stellarator. This system equips a fast PIN switch to alternate the frequency source between two voltage-controlled oscillators, providing an operational frequency range from 14.5 GHz to 25.5 GHz. A monostatic antenna geometry and an ellipsoidal mirror are implemented in the vessel of HSX, where the polarization of the transmitted microwave can be switched between O- and X-mode to accommodate the magnetic field and plasma density. Although the original system was designed for density fluctuation measurement, significant efforts have been undertaken to improve the system performance and to realize the density profile inversion. Recent improvements of the system reported here include calibration of the dispersion in the transmission line, optimization of the waveform, and implementation of the Choi-Williams time–frequency distribution for spectral analysis. In this paper, we present the optimization of the reflectometry system along with first experimental measurements of the density profile and observations of fluctuations during gas puffing experiments.

Han, X. (ORCID:0000000184986433)↗
DOE OSTI2025

Physics-Informed Graph Neural Networks for Collaborative Dynamic Reconfiguration and Voltage Regulation in Unbalanced Distribution Systems

Network reconfiguration has long been employed as a strategic approach to minimize power distribution system losses and effectively regulate voltage levels. Tap-changing voltage regulators are also critical for controlling bus voltages, especially in accommodating the increasing integration of distributed energy resources (DERs) with intermittent outputs. This paper introduces novel methodologies to address the challenges of dynamic reconfiguration and optimal tap setting in unbalanced three-phase distribution systems. We propose an approximated mixed-integer quadratically constrained program (MIQCP) to model dynamic reconfiguration, along with a pioneering formulation for voltage regulator (VR) tap-setting based on Special Ordered Set type 1 (SOS1). To mitigate computational complexity, we propose a physics-informed spatial-temporal graph convolutional network (STGCN) with an integrated link classifier. The proposed approach enables efficient solution generation by fixing specific variables in the MIQCP instance and solving the simplified sub-MIP using an MIP solver. Numerical studies demonstrate the superior prediction accuracy of our STGCN model compared to baseline neural network models, resulting in reduced DER curtailment and voltage deviation with shorter computation time.

dynamic reconfiguration↗
DOE OSTI2025

Strategic Placement and Sizing of Distributed Generation for Resilience Enhancement of Distribution Grids With Microgrid Formation

The rise in frequency and severity of extreme weather events highlights the need for resilient power distribution networks. Microgrids can help improve the resilience of distribution grids by providing continuous power supply using local distribution generation (DG) when the distribution grid fails. In this paper, we propose an approach for optimal placement and sizing of DG to form multiple microgrids throughout the distribution network by restoration actions such as switching operations in case of distribution grid outages caused by extreme weather events. Considering the randomness of damaged distribution lines, the DG placement and sizing problem is formulated as a two-stage stochastic mixed-integer program, with the first stage determining the placement and size of DG, and the second stage focusing on minimizing the amount of load shedding through network restoration and microgrid formations for each scenario. Due to the large number of scenarios, the sample average approximation (SAA) method is employed to solve the problem. The results of case studies on a modified IEEE 33 bus distribution grid demonstrate the effectiveness of the proposed DG placement and sizing strategy in improving the resilience of distribution grids by allowing the formation of multiple microgrids. In addition, the robustness and accuracy of the SAA method are validated through various case studies.

Distributed generation planning↗
NASA NTRSDate not supplied

Wind-Optimal Trajectories for Multirotor eVTOL Aircraft on UAM Missions

Distributed electric propulsion powered electric vertical takeoff and landing aircraft are expected to enable urban air mobility. Low specific energy of onboard lithium-ion polymer batteries and wind conditions impose constraints on flight endurance. Therefore, from the safety and efficiency perspective, planning and flying minimum energy trajectories are important.The primary motivation for this paper is to determine if there is an operational benefit to flying wind-optimal trajectories for short flights (less than 60 miles) in the urban environment. This study employs wind-optimal trajectories for a NASA-proposed conceptual multirotor aircraft flight in the urban environment. The optimal control model presented includes a wind model for quantifying the effect of wind on the trajectory. The optimal control problem is numerically solved using the direct method. Energy consumption and flight duration flying wind-optimal trajectories between origins and destinations in a metropolitan area are compared with energy consumption and flight duration flying on the great-circle paths between the same origin and destination pairs to determine the operational benefit of wind-optimal routing for short flights.The flight duration results for different scenarios are validated using a simulation tool designed and developed by NASA for exploring advanced air traffic management concepts. In summary,this research study suggests that for short flights in an urban environment, the wind-optimal trajectories have a very slight (insignificant) operational advantage over the great-circle trajectories in terms of energy consumption and flight duration. As expected, headwinds and tailwinds along the route of flight have a significant impact on energy consumption and flight duration.

Urban Air Mobility↗
NASA NTRS1996

Effects of Inlet Flow Conditions on Crossflow Jet Mixing

An experimental investigation of the effects of mainstream turbulence, mainstream swirl and non-symmetric mass addition has been conducted for the isothermal mixing of multiple jets injected into a confined rectangular crossflow. Jet penetration and mixing in the near field was studied using planar Mie scattering to measure time-averaged mixture fraction distributions. Orifice configurations were used that were optimized for mixing performance based on previous experimental and computational results for a homogeneous approach flow. Mixing effectiveness, determined using a spatial unmixedness parameter based on the variance of the mean jet concentration distributions, was found to be minimally affected by free-stream turbulence but significantly influenced by the addition of swirl to the mainstream. The results for non-symmetric mass addition indicate that the concentration distribution of the flowfield can be tailored if desired.

Liscinsky, D. S.↗
DOE OSTI2026

Structural coherence model for predicting molten salt thermal conductivity informed by the pair distribution function

To enable thermal behavior prediction and design optimization of molten salt reactors, thermal conductivity of molten salts must be characterized in terms of salt composition and temperature. Current theoretical models fail to provide consistent approximations for all halide mixtures, particularly actinide-bearing melts. This study aims to link the short-range order structure of molten salts to the mean free path of energy carriers through a simple structural coherence model informed by the partial pair distribution function. The proposed method is used to predict the thermal conductivity of 33 alkali and alkaline earth halide salts. Predictions approximate experimental measurements with a mean absolute error of 15.7% for dissociating, complexing, and actinide salts, including unary LiCl, NaCl, and MgCl 2 as well as mixtures LiF–NaF–KF (FLiNaK), LiF–BeF 2 (FLiBe), and NaCl–UCl 3 . The work provides evidence for the validity of energy carrier descriptions of molecular-level heat transfer in molten salts, with implications for improved theories of liquid energy transport in general.

Actinide mixtures↗
NASA NTRS1972

Aeroelastic optimization of a panel in high Mach number supersonic flow.

Solution for a least-weight skin thickness distribution for a panel with a flutter parameter constraint. This panel weighs less than any similar constant thickness panel, but has the same critical supersonic panel flutter parameter. The panel rests on simple supports and is of sandwich construction. The span to chord ratio is large enough that the inertial, elastic, and aerodynamic behavior is one-dimensional. The Mach number is great enough that the aerodynamic forces acting on the upper panel surface may be accurately described by quasi-steady, linearized, supersonic aerodynamic theory. The final optimum design is obtained from theoretical and numerical methods adapted from optimal control theory. The results of this investigation show that the optimal panel thickness distribution is symmetric about the panel chord midpoint. Compared to a reference panel with constant thickness, optimum panels are found to be nearly 12% lighter.

Weisshaar, T. A.↗
DOE OSTI2024

REopt Model Overview and Example Use Cases [Slides]

REopt(R) is a mixed-integer optimization model that minimizes the lifecycle cost of serving energy loads at a site. This work provides and introduction to the model along with its key workflow, techno-economic inputs, key outputs, and key caveats for readers to understand REopt the when, why, how of using this model. This resource also includes helpful links related to REopt model and the data sources it uses during the optimization.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1983

Calculation of potential flow past non-lifting bodies at angle of attack using axial and surface singularity methods

Two different singularity methods have been utilized to calculate the potential flow past a three dimensional non-lifting body. Two separate FORTRAN computer programs have been developed to implement these theoretical models, which will in the future allow inclusion of the fuselage effect in a pair of existing subcritical wing design computer programs. The first method uses higher order axial singularity distributions to model axisymmetric bodies of revolution in an either axial or inclined uniform potential flow. Use of inset of the singularity line away from the body for blunt noses, and cosine-type element distributions have been applied to obtain the optimal results. Excellent agreement to five significant figures with the exact solution pressure coefficient value has been found for a series of ellipsoids at different angles of attack. Solutions obtained for other axisymmetric bodies compare well with available experimental data. The second method utilizes distributions of singularities on the body surface, in the form of a discrete vortex lattice. This program is capable of modeling arbitrary three dimensional non-lifting bodies. Much effort has been devoted to finding the optimal method of calculating the tangential velocity on the body surface, extending techniques previously developed by other workers.

Shu, J. Y.↗
NASA NTRS1980

Local distributed estimation

Based on partial differential equations of motion the closed form solution for the optimal estimation of a spatially continuous state vector is derived, using a continuously distributed sensor. Local control is shown to be the feedback that minimizes a quadratic performance index of sensor and process disturbances. A detailed example of the control of a string in tension is presented.

Schaechter, D. B.↗