Search NASA⌕ Search

SEARCH · Search NASA

Results for “reverse phasing system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Microstructural evolution in NaNbO{sub 3}-based antiferroelectrics

Our recent study found that CaZrO{sub 3} doping can effectively enhance the antiferroelectric P phase in NaNbO{sub 3} ceramics, leading to a double polarization hysteresis loop characteristic of a reversible antiferroelectric ↔ ferroelectric phase transition [Shimizu et al., Dalton Trans. 44, 10763 (2015)]. Here, a thorough transmission electron microscope study was performed to illustrate the CaZrO{sub 3} doping-assisted antiferroelectricity stabilization. In parallel to the bright-field imaging and selected area electron diffraction from multiple zone axes, detailed dark-field imaging was utilized to determine the superlattice structural origins, from either oxygen octahedral tilting or antiparallel cation displacements. By analogy with Pb(Zr{sub 1−x}Ti{sub x})O{sub 3} and rare-earth doped BiFeO{sub 3} systems, the chemical substitutions are such as to an induced polar-to-antipolar transition that is consistent with a tolerance factor reduction. The resultant chemical pressure has a similar effect to the compressive hydrostatic pressure where the antiferroelectric state is favored over the ferroelectric state.

36 MATERIALS SCIENCE↗

Reversible Electron Beam Heating for Suppression of Microbunching Instabilities at Free-Electron Lasers

The presence of microbunching instabilities due to the compression of high-brightness electron beams at existing and future x-ray free-electron lasers (FELs) results in restrictions on the attainable lasing performance and renders beam imaging with optical transition radiation impossible. The instability can be suppressed by introducing additional energy spread, i.e., heating the electron beam, as demonstrated by the successful operation of the laser heater system at the Linac Coherent Light Source. The increased energy spread is typically tolerable for self-amplified spontaneous emission FELs but limits the effectiveness of advanced FEL schemes such as seeding. In this paper, we present a reversible electron beam heating system based on two transverse deflecting radio-frequency structures (TDSs) upstream and downstream of a magnetic bunch compressor chicane. The additional energy spread is introduced in the first TDS, which suppresses the microbunching instability, and then is eliminated in the second TDS. We show the feasibility of the microbunching gain suppression based on calculations and simulations including the effects of coherent synchrotron radiation. Acceptable electron beam and radio-frequency jitter are identified, and inherent options for diagnostics and on-line monitoring of the electron beam's longitudinal phase space are discussed.

43 PARTICLE ACCELERATORS↗

Electrochromic device based on electrospun WO{sub 3} nanofibers

Highlights: • WO{sub 3} electrochromic nanofibers were prepared by electrospinning technique. • WO{sub 3} nanofibers switched reversibly from transparent to blue color. • Electrochromic device was assembled using ionic liquid based gel electrolyte. • Significant optical modulation and excellent cycling stability were achieved for ECD. - Abstract: The tungsten oxide (WO{sub 3}) nanofibers were grown directly onto an ITO-coated glass via an electrospinning method for electrochromic applications. The electrochromic properties of WO{sub 3} nanofibers were investigated in the presence of different electrolytes including a series of ionic liquids and classic LiClO{sub 4}-PC system. A significant optical modulation of 20.82% at 760 nm, reversible coloration with efficiency of 64.58 cm{sup 2}/C and excellent cycling stability were achieved for the nanofiber electrochromic device (ECD) with ionic liquid based gel electrolyte.

36 MATERIALS SCIENCE↗

Switchable polar spirals in tricolor oxide superlattices

There are increasing evidences that ferroelectric states at the nanoscale can exhibit fascinating topological structures including polar vortices and skyrmions, akin to those observed in the ferromagnetic systems. Here we report the discovery of a new type of polar topological structure, an ordered array of nanoscale spirals, in the PbTiO 3 /BiFeO 3 /SrTiO 3 tricolor ferroelectric superlattice system obtained via phase-field simulations. This polar spiral structure is composed of fine ordered semi-vortex arrays with vortex cores forming a wavy distribution. It is demonstrated that the tricolor system has an ultrahigh Curie temperature of ~1000 K and a temperature of ~800 K for the phase transformation from spiral structure to in-plane orthorhombic domain structure, demonstrating a great thermal stability. The periodicity phase-diagram is constructed, showing multiple phases from inplane domain, polar spiral, and polar vortex to flux-closure with increasing ferroelectric layer thickness. Moreover, the spiral structure has a net in-plane polarization that could be switched by an experimentally-feasible irrotational in-plane field. The switching process involves a metastable vortex state and is fully reversible. This discovery could open up a new routine to design novel multiferroic topological structures with enhanced stability and tunability towards potential future applications in next-generation electronics.

36 MATERIALS SCIENCE↗

Synergistic Extraction of Dysprosium and Aggregate Formation in Solvent Extraction Systems Combining TBP and HDBP

During treatment of nuclear fuel in the Plutonium/URanium EXtraction (PUREX) process, the extractant tri-n-butyl phosphate (TBP) is known to degrade to dibutylphosphoric acid (HDBP), which increases the extraction of metal ions, thereby inhibiting their stripping from the organic phase. To better understand this phenomenon, we investigated how mixtures of TBP and HDBP influenced the extraction of metal, nitric acid, and water, and correlated the results to aggregated structures in the organic phase. The mole ratios of TBP-HDBP mixtures had a non-linear effect on the extraction of Dy 3+ and water from 0.2 M HNO 3 , indicating synergism. In 2 M HNO 3 , the TBP:HDBP mole ratio had a more linear relation to Dy 3+ and water extraction, so the synergistic effect was less pronounced than in the low acid system. The extraction of nitric acid showed no synergistic effect and follows closely what would be expected in a system using TBP only. The small-angle X-ray scattering (SAXS) data of the 0.2 M acid system showed maximum contrast at a TBP:HDBP mole ratio of 0.25, so that the synergistic mixture is also the most aggregated at 0.2 M acid. The 2 M acid system also showed that the mixed system is more aggregated than the end members, although this does not result in peak extraction. Previous studies of synergistic extraction of metal cations explain the enhanced extraction by increased dehydration of the metal ion. Although our data do not rule out the formation of mixed complexes according to the classical mechanism of synergism, our evidence of increased water extraction and aggregate formation in systems combining TBP and HDBP are complementary to the metal-centric dehydration aspects of the process. The findings in this study give insights into the complex chemistry of solvent extraction, thus providing a possible link between formation of aggregates in the organic phase and synergistic extraction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Unraveling two distinct polymorph transition mechanisms in one n-type single crystal for dynamic electronics

Cooperativity is used by living systems to circumvent energetic and entropic barriers to yield highly efficient molecular processes. Cooperative structural transitions involve the concerted displacement of molecules in a crystalline material, as opposed to typical molecule-by-molecule nucleation and growth mechanisms which often break single crystallinity. Cooperative transitions have acquired much attention for low transition barriers, ultrafast kinetics, and structural reversibility. However, cooperative transitions are rare in molecular crystals and their origin is poorly understood. Crystals of 2-dimensional quinoidal terthiophene (2DQTT-o-B), a high-performance n-type organic semiconductor, demonstrate two distinct thermally activated phase transitions following these mechanisms. Here we show reorientation of the alkyl side chains triggers cooperative behavior, tilting the molecules like dominos. Whereas, nucleation and growth transition is coincident with increasing alkyl chain disorder and driven by forming a biradical state. We establish alkyl chain engineering as integral to rationally controlling these polymorphic behaviors for novel electronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superconducting energy gap of 2 H - NbS e 2 in phonon spectroscopy

We present a high-energy-resolution inelastic x-ray scattering data investigation of the charge-density-wave (CDW) soft phonon mode upon entering the superconducting state in 2 H –NbSe 2 . Measurements were done close to the CDW ordering wave vector qCDW at q=q CDW + (0,0,l), 0.15 ≤ l ≤ 0.5, for T = 10K (CDW order) and 3.8K (CDW order+superconductivity). We observe changes of the phonon line shape that are characteristic for systems with strong electron-phonon coupling in the presence of a superconducting energy gap 2Δ c and from which we can demonstrate an l dependence of the superconducting gap. Reversely, our data imply that the CDW energy gap is strongly localized along the c* direction. The confinement of the CDW gap to a very small momentum region explains the rather low competition and easy coexistence of CDW order and superconductivity in 2 H –NbSe 2 . Furthermore, the energy gained by opening Δ CDW seems to be too small to be the driving force of the phase transition at T CDW = 33K, which is better described as an electron-phonon coupling driven structural phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insights into water extraction and aggregation mechanisms of malonamide-alkane mixtures

Structure at the nanoscale in the organic phase of liquid–liquid extraction systems is often tied to separation performance. However, the weak interactions that drive extractant assembly lead to poorly defined structures that are challenging to identify. Here, in this work, we investigate the mechanism of water extraction for a malonamide extractant commonly applied to f-element separations. We measure extractant concentration fluctuations in the organic phase with small angle X-ray scattering (SAXS) before and after contact with water at fine increments of extractant concentration, finding no qualitative changes upon water uptake that might suggest significant nanoscopic reorganization of the solution. The critical composition for maximum fluctuation intensity is consistent with small water–extractant adducts. The extractant concentration dependence of water extraction is consistent with a power law close to unity in the low concentration regime, suggesting the formation of 1 : 1 water–extractant adducts as the primary extraction mechanism at low concentration. At higher extractant concentrations, the power law slope increases slightly, which we find is consistent with activity effects modeled using Flory–Huggins theory without introduction of additional extractant–water species. Molecular dynamics simulations are consistent with these findings. The decrease in interfacial tension with increasing extractant concentration shows a narrow plateau region, but it is not correlated with any change in fluctuation or water extraction trends, further suggesting no supramolecular organization such as reverse micellization. This study suggests that water extraction in this system is particularly simple: it relies on a single mechanism at all extractant concentrations, and only slightly enhances the concentration fluctuations characteristic of the dry binary extractant/diluent mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

“Quantum Geometric Nesting” and Solvable Model Flat-Band Systems

We introduce the concept of “quantum geometric nesting” (QGN) to characterize the idealized ordering tendencies of certain flat-band systems implicit in the geometric structure of the flat-band subspace. Perfect QGN implies the existence of an infinite class of local interactions that can be explicitly constructed and give rise to solvable ground states with various forms of possible fermion bilinear order, including flavor ferromagnetism, density waves, and superconductivity. For the ideal Hamiltonians constructed in this way, we show that certain aspects of the low-energy spectrum can also be exactly computed including, in the superconducting case, the phase stiffness. Examples of perfect QGN include flat bands with certain symmetries (e.g., chiral or time reversal) and non-symmetry-related cases exemplified with an engineered model for pair-density wave. Extending this approach, we obtain exact superconducting ground states with nontrivial pairing symmetry. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Final Technical Report: Results of Phase 1

Arizona Public Service Company (APS) expects that by 2027, renewable energy will account for 6,590 GWh in energy consumption by its customers. While much of this future energy will come from large centrally-located power plants, distributed renewable energy, sited at the point of end-use will also play an important role in meeting the needs of APS customers and is expected to provide 1,734 GWh. With increasing penetration of residential and commercial photovoltaic (PV) systems at the point of end-use, PV power generation not only offsets the load, but could also cause significant shifts in power flow patterns through the distribution system, and could possibly cause reversal of flow through some branches of a distribution circuit. Significant changes to power flow introduced into existing distribution systems due to the increased amount of PV systems may cause operational issues, including over-voltage on the distribution feeder (loss of voltage regulation) and incorrect operation of control equipment, which may lead to an increase in the number of operations and related equipment wear that could affect equipment reliability and customer power quality. Additionally, connecting generation resources to a distribution feeder can introduce additional sources of short-circuit current to the distribution system. This could potentially result in increased short-circuit currents, potentially reaching damaging levels, causing protection desensitization and a potential loss of protection coordination. These effects may be further compounded by variability of PV production due to shading by clouds. The effects of these phenomena in distributed PV applications are not well understood, and there is a great need to characterize this variability. This project will contribute to understanding the effects of high-penetration solar electricity on the design and operation of distribution systems by demonstrating how a high penetration of PV systems affects grid operations of a working, utility distribution feeder. To address the technical challenges related to the integration of distributed PV when PV penetration levels reach or exceed 30% of the total load, technologies and methods to ensure the stable and safe operation of the feeder will be evaluated. Lessons learned will enable APS to improve the framework for future PV integration on its system and may also aid other utilities across the United States energy sector in accelerating the adoption of distributed photovoltaic generation.

14 SOLAR ENERGY↗

Association Kinetics for Perfluorinated n -Alkyl Radicals

Radical-radical reaction channels are important in the pyrolysis and oxidation chemistry of perfluoroalkyl substances (PFAS). In particular, unimolecular dissociation reactions within unbranched n-perfluoroalkyl chains, and their corresponding reverse barrierless association reactions, are expected to be significant contributors to the gas-phase thermal decomposition of families of species such as perfluorinated carboxylic acids and perfluorinated sulfonic acids. Unfortunately, experimental data for these reactions are scarce and uncertain. Furthermore, obtaining reliable theoretical predictions for such reactions is a laborious and computationally intensive task. Here, in this work, the chemical kinetics of the various association/decomposition reactions producing/decomposing the C 2 -C 4 series of unbranched n-perfluoroalkanes (C 2 F 6 , C 3 F 8 , and C 4 F 10 ) are examined using state-of-the-art ab initio transition-state-theory-based master-equation calculations. The variable-reaction-coordinate transition-state theory (VRC-TST) formalism is employed in computing the microcanonical and canonical rates for the association reactions. Reaction thermochemistry is obtained via composite quantum chemistry calculations and the laddering of error-canceling reaction schemes via a connectivity-based hierarchy approach employing ANL1/ANL0-style reference energies. Lennard-Jones collision model parameters for the considered systems were estimated by a direct dynamics approach, and collisional energy transfer parameters were obtained from analogies to systems of similar size and heavy-atom connectivity. A one-dimensional master equation approach was used to convert the microcanonical rate coefficients from the VRC-TST analysis into temperature- and pressure-dependent rate constants for the association reactions and the reverse dissociation reactions. The data are reported in standardized formats for usage in comprehensive chemical kinetic models for PFAS thermal destruction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast and Highly Reversible Sodium Storage in Zinc-Antimony Intermetallic Nanomaterials

The progress on sodium-ion battery technology faces many grand challenges, one of which is the considerably lower rate of sodium insertion/deinsertion in electrode materials due to the larger size of sodium (Na) ions and complicated redox reactions compared to the lithium-ion systems. Here, it is demonstrated that sodium ions can be reversibly stored in Zn-Sb intermetallic nanowires at speeds that can exceed 295 nm s -1 . Remarkably, these values are one to three orders of magnitude higher than the sodiation rate of other nanowires electrochemically tested with in situ transmission electron micro­scopy. It is found that the nanowires display about 161% volume expansion after the first sodiation and then cycle with an 83% reversible volume expansion. Despite their massive expansion, the nanowires can be cycled without any cracking or facture during the ultrafast sodiation/desodiation process. Additionally, most of the phases involved in the sodiation/desodiation process possess high electrical conductivity. More specifically, the NaZnSb exhibits a layered structure, which provides channels for fast Na + diffusion. This observation indicates that Zn-Sb intermetallic nanomaterials offer great promise as high rate and good cycling stability anodic materials for the next generation of sodium-ion batteries.

Nie, Anmin↗

Effective dynamics of two-dimensional Bloch electrons in external fields derived from symmetry

We develop a comprehensive theory for the effective dynamics of Bloch electrons based on symmetry. We begin with a scheme to systematically derive the irreducible representations (IRs) characterizing the Bloch eigenstates in a crystal. Starting from a tight-binding (TB) approach, we decompose the TB basis functions into localized symmetry-adapted atomic orbitals and crystal-periodic symmetry-adapted plane waves. Each of these two subproblems is independent of the details of a particular crystal structure and it is largely independent of the relevant aspects of the other subproblem, hence permitting for each subproblem an independent universal solution. Taking monolayer MoS 2 and few-layer graphene as examples, we tabulate the symmetrized p and d orbitals as well as the symmetrized plane-wave spinors relevant for these crystal structures. The symmetry-adapted basis functions block-diagonalize the TB Hamiltonian such that each block yields eigenstates transforming according to one of the IRs of the group of the wave vector G k . For many crystal structures, it is possible to define multiple distinct coordinate systems such that for wave vectors k at the border of the Brillouin zone the IRs characterizing the Bloch states depend on the coordinate system, i.e., these IRs of G k are not uniquely determined by the symmetry of a crystal structure. The different coordinate systems are related by a coordinate shift that results in a rearrangement of the IRs of G k characterizing the Bloch states. We illustrate this rearrangement with three coordinate systems for MoS 2 and trilayer graphene. The freedom to choose different distinct coordinate systems can simplify the symmetry analysis of the Bloch states. Given the IRs of the Bloch states in one coordinate system, a rearrangement lemma yields immediately the IRs of the Bloch states in the other coordinate systems. The rearrangement of the IRs in different coordinate systems does not affect observable physics such as selection rules or the effective Hamiltonians for the dynamics of Bloch states in external fields. Using monolayer MoS 2 as an example, we combine the symmetry analysis of its bulk Bloch states with the theory of invariants to construct a generic multiband Hamiltonian for electrons near the K point of the Brillouin zone. Here, the Hamiltonian includes the effect of spin-orbit coupling, strain, and external electric and magnetic fields. Invariance of the Hamiltonian under time reversal yields additional constraints for the allowed terms in the Hamiltonian and it determines the phase (real or imaginary) of the prefactors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluid-based gating mechanism with tunable multiphase selectivity and antifouling behavior

A gating mechanism that uses a capillary stabilized liquid as a reversible, reconfigurable gate that fills and seals pores in the closed state, and creates a non-fouling, liquid-lined pore in the open state is disclosed. Theoretical modeling and experiments demonstrate that for each transport substance, the gating threshold—the pressure needed to open the pores—can be rationally tuned over a wide pressure range. This enables realizing in one system differential response profiles for a variety of liquids and gases, even letting liquids flow through the pore while preventing gas from escaping. These capabilities allow dynamic modulation of gas-liquid sorting and to separate multi-phase mixtures, with the liquid lining ensuring sustained antifouling behavior. Because the liquid gating strategy enables efficient short-term and long-term operation and can be applied to a variety of pore structures and membrane materials, and to nano, micro as well as macroscale fluid systems, the gating systems is useful in a wide range of applications.

36 MATERIALS SCIENCE↗

Electron microscopy: Phase transition singled out

One of the fundamental challenges within nanotechnology is to understand and control how nanoscale properties are initiated, evolve, and eventually terminate as a system moves from an individual nanostructure towards the meso- and macro-scale ensembles that are used in most applications. The ability to directly observe individual nanostructures and characterize their structure and composition has long been within the purview of transmission electron microscopy (TEM). The almost ubiquitous application of spherical aberration correction in TEM and in scanning-TEM (STEM) that has occurred over the last 10 years, now means it is possible to routinely characterize such nanostructures with both atomic resolution and sensitivity [1,2]. The development of temporal resolution in the TEM and the ability to study fast dynamics, on the other hand, has only recently come to the forefront of instrumentation development and is currently defined by two different approaches in the use of photoemission sources: the single shot s-ns dynamic TEM (DTEM) [3] and the stroboscopic ps-fs 4-D EM [4]. In the case of the DTEM, the goal is to observe the longer timescale irreversible structural changes that occur during nucleation and growth phenomena (here the single shot approach means there are enough electrons in a single pulsed beam to form a complete image). The 4-D EM focuses on a stroboscopic approach with the goal of studying very rapid reversible effects that occur during phase transitions (here an image is composed of thousands of pump-probe events each occurring with exactly the same time signature, with an individual pulse containing only a few electrons).

36 MATERIALS SCIENCE↗

Chemical and Electrochemical Lithiation of van der Waals Tetrel-Arsenides

Lithiation of van der Waals tetrel–arsenides, GeAs and SiAs, has been researched. Electrochemical lithiation demonstrated large initial capacities of over 950 mAh g -1 accompanied by rapid fading over successive cycling in the voltage range 0.01–2 V. Limiting the voltage range to 0.5–2 V achieved more stable cycling, which was attributed to the intercalation process with lower capacities. Ex situ powder X–ray diffraction confirmed complete amorphization of the samples after lithiation, as well as recrystallization of the binary tetrel–arsenide phases after full delithiation in the voltage range 0.5–2 V. Solid–state synthetic methods produce layered phases, in which Si–As or Ge–As layers are separated by Li cations. The first layered compounds in the corresponding ternary systems were discovered, Li 0.9 Ge 2.9 As 3.1 and Li 3 Si 7 As 8 , which crystallize in the Pbam (No. 55) and P2/m (No. 10) space groups, respectively. Semiconducting layered GeAs and SiAs accommodate the extra charge from Li cations through structural rearrangement in the Si–As or Ge–As layers and eventually by replacement of the tetrel dumbbells with sets of Li atoms. Ge and Si monoarsenides reflected high structural flexibility and a mild ability for reversible lithiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗