Search NASA⌕ Search

SEARCH · Search NASA

Results for “superlattices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Dynamic Tuning of Moiré Excitons in a WSe 2 /WS 2 Heterostructure via Mechanical Deformation

Moiré superlattices in van der Waals (vdW) heterostructures form by stacking atomically thin layers on top of one another with a twist angle or lattice mismatch. The resulting moiré potential leads to a strong modification of the band structure, which can give rise to exotic quantum phenomena ranging from correlated insulators and superconductors to moiré excitons and Wigner crystals. Here, in this study, we demonstrate the dynamic tuning of moiré potential in a WSe 2 /WS 2 heterostructure at cryogenic temperature. We utilize the optical fiber tip of a cryogenic scanning near-field optical microscope (SNOM) to locally deform the heterostructure and measure its near-field optical response simultaneously. The deformation of the heterostructure increases the moiré potential, which leads to a red shift of the moiré exciton resonances. We observe the interlayer exciton resonance shifts up to 20 meV, while the intralayer exciton resonances shift up to 17 meV.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Domain-Dependent Surface Adhesion in Twisted Few-Layer Graphene: Platform for Moiré-Assisted Chemistry

Twisted van der Waals multilayers are widely regarded as a rich platform to access novel electronic phases thanks to the multiple degrees of freedom available for controlling their electronic and chemical properties. Here, in this work, we propose that the stacking domains that form naturally due to the relative twist between successive layers act as an additional ”knob” for controlling the behavior of these systems and report the emergence and engineering of stacking domain-dependent surface chemistry in twisted few-layer graphene. Using mid-infrared near-field optical microscopy and atomic force microscopy, we observe a selective adhesion of metallic nanoparticles and liquid water at the domains with rhombohedral stacking configurations of minimally twisted double bi- and trilayer graphene. Furthermore, we demonstrate that the manipulation of nanoparticles located at certain stacking domains can locally reconfigure the moiré superlattice in their vicinity at the micrometer scale. Our findings establish a new approach to controlling moiré-assisted chemistry and nanoengineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extraordinary Magnetic Response of an Anisotropic 2D Antiferromagnet via Site Dilution

A prominent characteristic of 2D magnetic systems is the enhanced spin fluctuations, which reduce the ordering temperature. We report that a magnetic field of only 1000th of the Heisenberg superexchange interaction can induce a crossover, which for practical purposes is the effective ordering transition, at temperatures about 6 times the Néel transition in a site-diluted two-dimensional anisotropic quantum antiferromagnet. Such a strong magnetic response is enabled because the system directly enters the antiferromagnetically ordered state from the isotropic disordered state, skipping the intermediate anisotropic stage. The underlying mechanism is achieved on a pseudospin-half square lattice realized in the [(SrIrO3)1/(SrTiO3)2] superlattice thin film that is designed to linearly couple the staggered magnetization to external magnetic fields by virtue of the rotational symmetry-preserving Dzyaloshinskii–Moriya interaction. Furthermore, our model analysis shows that the skipping of the anisotropic regime despite finite anisotropy is due to the enhanced isotropic fluctuations under moderate dilution.

2D antiferromagnet↗

Direct Measurement of Terahertz Conductivity in a Gated Monolayer Semiconductor

Two-dimensional semiconductors and their moiré superlattices have emerged as important platforms for investigating correlated electrons. However, many key properties of these systems, such as the frequency-dependent conductivity, remain experimentally inaccessible because of the mesoscopic sample size. Here we report a technique to directly measure the complex conductivity of electrostatically gated two-dimensional semiconductors in the terahertz frequency range. Applying this technique to a WSe2 monolayer encapsulated in hBN, we observe a clear Drude-like response between 0.1 and 1 THz, in a density range challenging to access even in DC transport. Our work opens a new avenue for studying tunable van der Waals heterostructures using terahertz spectroscopy.

2D semiconductors↗

Lithography-Defined Semiconductor Moirés with Anomalous In-Gap Quantum Hall States

Quantum materials and phenomena have attracted great interest for their potential applications in next-generation microelectronics and quantum-information technologies. In one especially interesting class of quantum materials, moiré superlattices (MSLs) formed by twisted bilayers of 2D materials, a wide range of novel phenomena are observed. However, there exist daunting challenges such as reproducibility and scalability of utilizing 2D MSLs for microelectronics and quantum technologies due to their exfoliate-tear-stack method. Here, we propose lithography-defined semiconductor MSLs, in which three fundamental parameters electron−electron interaction, spin−orbit coupling, and band topology are designable. We experimentally investigate quantum-transport properties in a moiré specimen made in an InAs quantum well. Strong anomalous in-gap states are observed within the same integer quantum Hall state. Our work opens up new horizons for studying 2D quantum-materials phenomena in semiconductors featuring superior industry-level quality and state-of-the-art technologies, and they may potentially enable new quantum-information and microelectronics technologies.

36 MATERIALS SCIENCE↗

Twist-Angle-Dependent Excitons in Moiré MoTe 2 Visualized by Cryogenic STEM and Monochromated EELS

van der Waals twisted bilayers of transition-metal dichalcogenides exhibit diverse excitonic phenomena arising from moiré superlattices and lattice reconstruction. While interlayer strain and relaxation reshape their electronic bands, their nanoscale influence on the excitonic fine structure remains poorly understood. Here, we study the interplay between spin–orbit coupling (SOC) and the moiré lattice by probing excitons in H-type twisted (∼8-layer × 8-layer) MoTe 2 using atomic-resolution scanning transmission electron microscopy (STEM) combined with monochromated electron energy loss spectroscopy (EELS) at cryogenic temperature. Spatially resolved spectra reveal moiré-site-dependent variations in excitonic absorption, including modulation of the X B exciton across the moiré unit cell. We find that SOC in MoTe 2 increases with the twist angle within the studied range (2–4.5°), with the largest value observed at 4°. Furthermore, these findings establish the twist angle as a tunable parameter for SOC via moiré engineering and link local structural relaxation to excitonic fine structure in twisted MoTe 2 .

cryogenic STEM/EELS↗

The Diffusion Mechanism of Ge During Oxidation of Si/SiGe Nanofins

A recently discovered, enhanced Ge diffusion mechanism along the oxidizing interface of Si/SiGe nanostructures has enabled the formation of single-crystal Si nanowires and quantum dots embedded in a defect-free, single-crystal SiGe matrix. Here, we report oxidation studies of Si/SiGe nanofins aimed at gaining a better understanding of this novel diffusion mechanism. Here, a superlattice of alternating Si/Si 0.7 Ge 0.3 layers was grown and patterned into fins. After oxidation of the fins, the rate of Ge diffusion down the Si/SiO 2 interface was measured through the analysis of HAADF-STEM images. The activation energy for the diffusion of Ge down the sidewall was found to be 1.1 eV, which is less than one-quarter of the activation energy previously reported for Ge diffusion in bulk Si. Through a combination of experiments and DFT calculations, we propose that the redistribution of Ge occurs by diffusion along the Si/SiO 2 interface followed by a reintroduction into substitutional positions in the crystalline Si.

36 MATERIALS SCIENCE↗

One-Step Ligand-Exchange Method to Produce Quantum Dot–DNA Conjugates for DNA-Directed Self-Assembly

To address the current challenges in making bright, stable, and small DNA-functionalized quantum dots (QDs), we have developed a one-step ligand-exchange method to produce QD–DNA conjugates from commonly available hydrophobic QDs. We show that by systematically adjusting the reaction conditions such as ligand-to-nanoparticle molar ratio, pH, and solvent composition, stable and highly photoluminescent water-soluble QD–DNA conjugates with relatively high ligand loadings can be produced. Moreover, by site specifically binding these QD–DNA conjugates to a DNA origami template, we demonstrate that these bioconjugates have sufficient colloidal stability for DNA-directed self-assembly. Fluorescence quenching by an adjacent gold nanoparticle (AuNP) was demonstrated. Such QD–AuNP dimers may serve as biosensors with improved sensitivity and reproducibility. Furthermore, our simple method can facilitate the assembly of QDs into more complex superlattices and discrete clusters that may enable novel photophysical properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Unveiling the Interfacial Reconstruction Mechanism Enabling Stable Growth of the Delafossite PdCoO 2 on Al 2 O 3 and LaAlO 3

Delafossites, composed of noble metal (A + ) and strongly correlated sublayers (BO 2 – ), form natural superlattices with highly anisotropic properties. These properties hold significant promise for various applications, but their exploitation hinges on the successful growth of high-quality thin films on suitable substrates. Unfortunately, the unique lattice geometry of delafossites presents a significant challenge to thin-film fabrication. Different delafossites grow differently, even when deposited on the same substrate, ranging from successful epitaxy to complete growth suppression. These variations often lack a clear correlation to obvious causes like lattice mismatch. Unidentified stabilization mechanisms appear to enable growth in certain cases, allowing these materials to form stable thin films or act as buffer layers for subsequent delafossite growth. This study employs advanced scanning transmission electron microscopy techniques to investigate the nucleation mechanism underlying the stable growth of PdCoO 2 films on Al 2 O 3 and LaAlO 3 substrates grown via molecular-beam epitaxy. Our findings reveal the presence of a secondary phase within the substrate surface that stabilizes the films. This mechanism deviates from the conventional understanding of strain relief mechanisms at oxide heterostructure interfaces and differs significantly from those observed for Cu-based delafossites.

36 MATERIALS SCIENCE↗

Signatures of Coherent Phonon Transport in Ultralow Thermal Conductivity Two-Dimensional Ruddlesden–Popper Phase Perovskites

An emerging class of methylammonium lead iodide (MAPbI 3 )-based Ruddlesden-Popper (RP) phase perovskites, BA 2 MA n-1 Pb n I 3n+1 (n = 1-7), exhibit enhanced stability to environmental conditions relative to MAPbI 3 , yet still degrade at elevated temperatures. Here, we experimentally determine the thermal conductivities of these layered RP phases for n = 1-6, where n defines the number of repeated perovskite octahedra per layer. We measure thermal conductivities of 0.37 ± 0.13/0.12, 0.17 ± 0.08/0.07, 0.21 ± 0.05/0.04, and 0.19 ± 0.04/0.03 W/m∙K in thin films of n = 1-4 and 0.08 ± 0.06/0.04, 0.06 ± 0.04/0.03, 0.06 ± 0.03/0.03, and 0.08 ± 0.07/0.04 W/m∙K in single crystals of n = 3-6. With the exception of n = 1, these thermal conductivities are lower than the range of 0.34-0.50 W/m∙K reported for single-crystal MAPbI 3 . Reduced-order lattice dynamics modeling suggests that the initially decreasing trend of thermal conductivity in similarly oriented perovskites with increasing n may result from the transport properties of coherent phonons, emergent from the superstructure, that do not scatter at the interfaces of organic butylammonium chains and perovskite octahedra. Reduced group velocity of coherent phonons in n = 3-6, a consequence of band flattening in the phonon dispersion, is primarily responsible for their ultralow thermal conductivities. Similar effects on thermal conductivity have been experimentally demonstrated in deposited superlattices, but never in naturally defined materials such as RP phases. GIWAXS measurements reveal that higher n RP phase thin films are less orientationally controlled and therefore possess apparently elevated thermal conductivities relative to single crystals of the same n.

2D perovskites↗

Colloidal Dispersions of Sterically and Electrostatically Stabilized PbS Quantum Dots: Structure Factors, Second Virial Coefficients, and Film-Forming Properties

Electrostatically stabilized nanocrystals (NCs) and, in particular, quantum dots (QDs) hold promise for forming strongly coupled superlattices due to their compact and electronically conductive surface ligands. However, studies of the colloidal dispersion and interparticle interactions of electrostatically stabilized sub-10 nm NCs have been limited, hindering the optimization of their colloidal stability and self-assembly. In this study, we employed small-angle X-ray scattering (SAXS) experiments to investigate the interparticle interactions and arrangement of PbS QDs with thiostannate ligands (PbS-Sn2S64-) in polar solvents. The study reveals significant deviations from the ideal solution behavior in electrostatically stabilized QD dispersions. Our results demonstrate that PbS-Sn2S64- QDs exhibit long-range interactions within the solvent, in contrast to the short-range steric repulsion characteristic of PbS QDs with oleate ligands (PbS-OA). Introducing highly charged multivalent electrolytes screens electrostatic interactions between charged QDs, reducing the length scale of the repulsive interactions. Furthermore, we calculated the second virial (B2) coefficients from SAXS data, providing insights into how surface chemistry, solvent, and size influence pair potentials. Finally, we explore the influence of long-range interparticle interactions of PbS-Sn2S64- QDs on the morphology of films produced by drying or spin-coating colloidal solutions. The long-range repulsive term of PbS-Sn2S64- QDs promotes the formation of amorphous films, and screening the electrostatic repulsion by the addition of an electrolyte enables the formation of crystalline domains. These findings highlight the critical role of NC-NC interactions in tailoring the properties of functional materials made of colloidal NCs.

SAXS↗

Prospects of Nanoscience with Nanocrystals: 2025 Edition

Abstract Nanocrystals (NCs) of various compositions have made important contributions to science and technology, with their impact recognized by the 2023 Nobel Prize in Chemistry for the discovery and synthesis of semiconductor quantum dots (QDs). Over four decades of research into NCs has led to numerous advancements in diverse fields, such as optoelectronics, catalysis, energy, medicine, and recently, quantum information and computing. The last 10 years since the predecessor perspective “Prospect of Nanoscience with Nanocrystals” was published in ACS Nano have seen NC research continuously evolve, yielding critical advances in fundamental understanding and practical applications. Mechanistic insights into NC formation have translated into precision control over NC size, shape, and composition. Emerging synthesis techniques have broadened the landscape of compounds obtainable in colloidal NC form. Sophistication in surface chemistry, jointly bolstered by theoretical models and experimental findings, has facilitated refined control over NC properties and represents a trusted gateway to enhanced NC stability and processability. The assembly of NCs into superlattices, along with two-dimensional (2D) photolithography and three-dimensional (3D) printing, has expanded their utility in creating materials with tailored properties. Applications of NCs are also flourishing, consolidating progress in fields targeted early on, such as optoelectronics and catalysis, and extending into areas ranging from quantum technology to phase-change memories. In this perspective, we review the extensive progress in research on NCs over the past decade and highlight key areas where future research may bring further breakthroughs.

Chemistry↗

Systematic Study of Al Impurity for NCM622 Cathode Materials

Many recycling processes have been developed for spent Li-ion batteries (LIBs), such as pyrometallurgy, hydrometallurgy, and direct recycling. For all the recycling methods, however, impurities are always introduced from the current collectors or casing materials, especially aluminum (Al), which might lead to negative effects on recovered electrode materials. Therefore, it is significant to determine the impacts of Al impurity on recovered materials. Here, the influence of the Al impurity for the synthesized LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) precursor and cathode is systematically studied. The cell with 0.2 at % Al impurity displays the highest reversible capacities (145.2, 130.5, and 100.3 mAh g -1 from 2, 3, and 5 C, respectively) and striking cycling capability at 2 C after 100 cycles with the highest retention capacity of 138.5 mAh g -1 . Meanwhile, the excess Al ions (5 at %) lead to the Li/Mn superlattice structure and deteriorate electrochemical performance of the synthesized NCM622 cathode.

25 ENERGY STORAGE↗

Supramolecular Assembly of U(IV) Clusters and Superatoms with Unconventional Countercations

Superatoms are nanometer-sized molecules or particles that form ordered lattices, mimicking their atomic counterparts. Hierarchical assembly of superatoms gives rise to emergent properties in lattices of quantum dots, p-block clusters, and fullerenes. In this report, we introduce a family of uranium-oxysulfate cluster anions whose hierarchical assembly in water is controlled by two parameters: acidity and the lanthanide or transition-metal countercation. In acid, larger Ln III (Ln = La–Ho) link hexamer (U 6 ) oxoclusters into body-centered cubic frameworks, while smaller Ln III (Ln = Er–Lu and Y) promote linking of 14 U 6 clusters into hollow superclusters (U 84 superatoms). U 84 assembles into superlattices including cubic-closest packed, body-centered cubic, and interpenetrating networks, bridged by interstitial countercations and U 6 clusters. Divalent transition metals (TM = Mn II and Zn II ) charge-balance and promote the fusion of 10 U 6 and 10 U monomers into a wheel-shaped cluster (U 70 ). Dissolution of U 70 in organic media shows (by small-angle X-ray scattering) that differing supramolecular assemblies are accessed, controlled by TM II -linking of U 70 clusters. Magnetic measurements of these assemblies reveal Curie–Weiss behavior at high temperatures, without pairing of the 5f 2 -electrons down to 2 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure Induced Assembly and Coalescence of Lead Chalcogenide Nanocrystals

We report here pressure induced nanocrystal coalescence of ordered lead chalcogenide nanocrystal arrays into one dimensional (1D) and 2D nanostructures. In particular, atomic crystal phase transitions and mesoscale coalescence of PbS and PbSe nanocrystals have been observed and monitored in-situ respectively by wide- and small-angle synchrotron X-ray scattering techniques. At the atomic scale, both nanocrystals underwent reversible structural transformations from cubic to orthorhombic at significantly higher pressures than those for the corresponding bulk materials. At the mesoscale, PbS nanocrystal arrays displayed a superlattice transformation from face-centered cubic to lamellar structures, while no clear mesoscale lattice transformation was observed for PbSe nanocrystal arrays. Intriguingly, transmission electron microscopy (TEM) showed that the applied pressure forced both spherical nanocrystals to coalesce into single crystalline 2D nanosheets and 1D nanorods. Our results confirm that pressure can be used as a straightforward approach to manipulate the interparticle spacing and engineer nanostructures with specific morphologies, and therefore provide insights into the design and functioning of new semiconductor nanocrystal structures under high-pressure conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering Robust Metallic Zero-Mode States in Olympicene Graphene Nanoribbons

Metallic graphene nanoribbons (GNRs) represent a critical component in the toolbox of low-dimensional functional materials technology serving as 1D interconnects capable of both electronic and quantum information transport. The structural constraints imposed by on-surface bottom-up GNR synthesis protocols along with the limited control over orientation and sequence of asymmetric monomer building blocks during the radical step-growth polymerization have plagued the design and assembly of metallic GNRs. Here, we report the regioregular synthesis of GNRs hosting robust metallic states by embedding a symmetric zero-mode (ZM) superlattice along the backbone of a GNR. Tight-binding electronic structure models predict a strong nearest-neighbor electron hopping interaction between adjacent ZM states, resulting in a dispersive metallic band. First-principles density functional theory-local density approximation calculations confirm this prediction, and the robust, metallic ZM band of olympicene GNRs is experimentally corroborated by scanning tunneling spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability Frontiers in the AM 6 X 6 Kagome Metals: The Ln Nb 6 Sn 6 ( Ln :Ce–Lu,Y) Family and Density-Wave Transition in LuNb 6 Sn 6

The kagome motif is a versatile platform for condensed matter physics, hosting rich interactions between magnetic, electronic, and structural degrees of freedom. In recent years, the discovery of a charge density wave (CDW) in the AV 3 Sb 5 superconductors and structurally-derived bond density waves (BDW) in FeGe and ScV 6 Sn 6 have stoked the search for new kagome platforms broadly exhibiting density wave (DW) transitions. Here, in this work, we evaluate the known AM 6 X 6 chemistries and construct a stability diagram that summarizes the structural relationships among the >125 member family. Subsequently, we introduce our discovery of the broader LnNb 6 Sn 6 (Ln:Ce–Nd,Sm,Gd–Tm,Lu,Y) family of kagome metals and an analogous DW transition in LuNb 6 Sn 6 . Our X-ray scattering measurements clearly indicate a (1/3, 1/3, 1/3) ordering wave vector (√$\bar{3}$ x √$\bar{3}$ x $3$ superlattice) and diffuse scattering on half-integer L-planes. Our analysis of the structural data supports the “rattling mode” DW model proposed for ScV 6 Sn 6 and paints a detailed picture of the steric interactions between the rare-earth filler element and the host Nb–Sn kagome scaffolding. We also provide a broad survey of the magnetic properties within the HfFe 6 Ge 6 -type LnNb 6 Sn 6 members, revealing a number of complex antiferromagnetic and metamagnetic transitions throughout the family. This work integrates our new LnNb 6 Sn 6 series of compounds into the broader AM 6 X 6 family, providing new material platforms and forging a new route forward at the frontier of kagome metal research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Salt-Induced Polymorphs Observed in Colloidal Single Crystals

Polymorphs are solid materials with the same chemical composition but different crystallographic structures. A unique aspect of polymorphs is that they exhibit different physical properties, such as solubility, melting point, density, color, hardness, and bioavailability. Here, we synthesized polymorphs of colloidal crystals engineered with DNA by slow-cooling gold nanoparticle-core programmable atom equivalents (PAEs, particles with DNA sequences that control their bonding characteristics) under salt concentrations ranging from 0.5 to 4 M NaCl. This approach yielded a diverse set of single-crystalline phases with cubic, tetragonal, and hexagonal lattice symmetries. The structural transitions observed here arise solely from the modulation of interparticle repulsion via ionic strength and thermal processing. Notably, in certain cases, we observed diffusionless phase transformations, wherein the superlattices evolve from cubic to lower-symmetry tetragonal lattices. By tuning the thermal stability and salt concentration, we captured intermediate, metastable body-centered tetragonal structures during the slow-cool process, indicating that subtle changes in free energy can direct crystallization to low-symmetry phases. In conclusion, this study demonstrates that thermal and ionic parameters can be tuned to access and stabilize colloidal crystal polymorphs with emergent structures and interesting functional properties.

Colloidal crystallization↗