Search NASA⌕ Search

SEARCH · Search NASA

Results for “Algorithm Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Quantifying Operational Drivers of Multimodal Biometric Verification in Aerial Surveillance

Multimodal biometric verification is increasingly applied across operational contexts ranging from close-range security cameras and building-mounted surveillance to long-range ground sensors and unmanned aerial system (UAS) imagery. Variations in acquisition conditions—such as image resolution, viewing geometry, and motion artifacts—pose significant challenges for cross-domain algorithmic generalization. This study evaluates two independent multimodal biometric verification systems developed under the Intelligence Advanced Research Projects Activity (IARPA) Biometric Recognition and Identification at Altitude and Range (BRIAR) program, comparing performance on close-range and aerial datasets. Close-range video served as a baseline to quantify the decline in verification performance on aerial footage. The dataset included six UAS platforms, spanning small quadcopters at 10m altitude to medium-sized fixed-wing aircraft at 360m. Mixed-effects logistic regression identified image resolution (head and body pixel counts), head height, sensor characteristics, and algorithm selection as primary determinants of verification success, whereas demographic attributes and mission gait were not significant predictors. Activity type and collection site influenced performance in close-range data but had negligible impact on UAS imagery. These results clarify modality-specific strengths and limitations and highlight opportunities to enhance cross-domain biometric verification.

Peluso, Alina [ORNL] (ORCID:0000000328950406)↗
DOE OSTI2024

Integration Development and Testing of Rear Transition Monitor for Beam Current Monitoring System

Addressing baseline effects in accelerator environments is crucial for accurate data acquisition and analysis, since baseline effects can obscure signal clarity and impact the reliability of beam current monitoring systems. There are many potential contributors to baseline noise, such as variations in beam dynamics, electromagnetic interference from nearby equipment, or RF interference. Previous applications of noise reduction systems don t sufficiently filter sources of asynchronous noise, so a new algorithm was implemented. A simulation dataset was created to replicate beam conditions and a Red Pitaya FPGA was used to collect data through the streaming application. A Python script was developed to implement noise reduction algorithms and efforts were made to integrate real-time data streaming with the Redis platform and Acnet Front End infrastructure.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Search for Fast Magnetic Monopoles with NOvA Far Detector

The NOvA experiment at Fermilab consists of two functionally identical liquid scintillator detectors called near detector and far detector to study neutrino oscillations using GeV-scale neutrinos from the Fermilab NuMI beam. Due to its location close to the earth’s surface, surface area of over 4,000 $(m^{2})$, and little overburden, the NOvA far detector is sensitive to an extensive range of magnetic monopole masses and velocities. With the help of the far detector, we are looking for signals of relic monopoles in the cosmic rays flux that might have been produced in the early universe. We have developed the data-driven trigger(DDT), a robust trigger algorithm optimized for continuously searching the magnetic monopole-like patterns in the live data. Due to the surface proximity of the far detector, the major challenge for this analysis at the offline level is the rejection of cosmic ray background in the collected data. In this talk, I will present the status of the search for fast-moving magnetic monopoles using the data collected by the NOvA far detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

An end-to-end deep learning solution for automated LiDAR tree detection in the urban environment

Cataloging and classifying trees in the urban environment is a crucial step in urban and environmental planning; however, manual collection and maintenance of this data is expensive and time-consuming. Although algorithmic approaches that rely on remote sensing data have been developed for tree detection in forests, they generally struggle in the more varied urban environment. This work proposes a novel end-to-end deep learning method for the detection of trees in the urban environment from remote sensing data. Specifically, we develop and train a novel PointNet-based neural network architecture to predict tree locations directly from LiDAR data augmented with multi-spectral imagery. We compare this model to a number of high-performing baselines on a large and varied dataset in the Southern California region, and find that our method outperforms all baselines in terms of tree detection ability (75.5% F-score) and positional accuracy (2.28 meter root mean squared error), while being highly efficient. We then analyze and compare the sources of errors, and how these reveal the strengths and weaknesses of each approach. Our results highlight the importance of fusing spectral and structural information for remote sensing tasks in complex urban environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Acceleration of the particle-in-cell code Osiris with graphics processing units

Fully relativistic particle-in-cell (PIC) simulations are crucial for advancing our knowledge of plasma physics. Modern supercomputers based on graphics processing units (GPUs) offer the potential to perform PIC simulations of unprecedented scale, but require robust and feature-rich codes that can fully leverage their computational resources. In this work, this demand is addressed by adding GPU acceleration to the PIC code Osiris. An overview of the algorithm, which features a CUDA extension to the underlying Fortran architecture, is given. Detailed performance benchmarks for thermal plasmas are presented, which demonstrate excellent weak scaling on NERSC's Perlmutter supercomputer and high levels of absolute performance. The robustness of the code to model a variety of physical systems is demonstrated via simulations of Weibel filamentation and laser-wakefield acceleration run with dynamic load balancing. Finally, measurements and analysis of energy consumption are provided that indicate that the GPU algorithm is up to ~14 times faster and ~7 times more energy efficient than the optimized CPU algorithm on a node-to-node basis. The described development addresses the PIC simulation community's computational demands both by contributing a robust and performant GPU-accelerated PIC code and by providing insight into efficient use of GPU hardware.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Accelerating Instanton Theory with the Line Integral Nudged Elastic Band Method and Gaussian Process Regression

Quantum tunneling plays a fundamental role in many chemical reactions, particularly proton transfer processes. Ring polymer instanton theory offers a practical framework for computing tunneling rates in complex molecular systems. However, applying the ring polymer instanton method with a potential energy surface generated on-the-fly using electronic structure calculations can be computationally demanding. Here, in this work, we present a new efficient implementation of the ring polymer instanton method by combining the Line Integral Nudged Elastic Band (LI-NEB) approach with Gaussian Process Regression (GPR). We benchmarked this method on prototypical ground-state proton transfer systems, including the benchmark gas-phase hydrogen abstraction reaction H + CH 4 → H 2 + CH 3 , malonaldehyde, and Z-3-amino-propenal (aminopropenal). Our results show that this approach is an order of magnitude faster than traditional instanton algorithms while maintaining excellent agreement with their tunneling rates. This development opens the door to studying proton transfer in larger systems with improved efficiency.

chemical physics↗
DOE OSTI2024

Accuracy versus precision in boosted top tagging with the ATLAS detector

The identification of top quark decays where the top quark has a large momentum transverse to the beam axis, known as top tagging , is a crucial component in many measurements of Standard Model processes and searches for beyond the Standard Model physics at the Large Hadron Collider. Machine learning techniques have improved the performance of top tagging algorithms, but the size of the systematic uncertainties for all proposed algorithms has not been systematically studied. This paper presents the performance of several machine learning based top tagging algorithms on a dataset constructed from simulated proton-proton collision events measured with the ATLAS detector at $\sqrt{s}$ = 13 TeV. The systematic uncertainties associated with these algorithms are estimated through an approximate procedure that is not meant to be used in a physics analysis, but is appropriate for the level of precision required for this study. The most performant algorithms are found to have the largest uncertainties, motivating the development of methods to reduce these uncertainties without compromising performance. To enable such efforts in the wider scientific community, the datasets used in this paper are made publicly available.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Improving missing transverse momentum estimation with a deep neural network

At hadron colliders, the net transverse momentum of particles that do not interact with the detector (missing transverse momentum, $^→_𝑝$$^{miss}_{T}$) is a crucial observable in many analyses. In the standard model, $^→_𝑝$$^{miss}_{T}$ originates from neutrinos. Many beyond-the-standard-model particles, such as dark matter candidates, are also expected to leave the experimental apparatus undetected. This paper presents a novel deep neural network based $^→_𝑝$$^{miss}_{T}$ estimator, DeepMET, developed by the CMS Collaboration at the LHC. The DeepMET algorithm produces a weight for each reconstructed particle based on its properties. The estimator is based on the negative vector sum of the weighted transverse momenta of all reconstructed particles in an event. Compared with other estimators currently employed by CMS, DeepMET improves the $^→_𝑝$$^{miss}_{T}$ resolution by 10%–30%, shows improvement for a wide range of final states, is easier to train, and is more resilient against the effects of additional proton-proton interactions accompanying the collision of interest.

artificial neural networks↗
DOE OSTI2026

Fast Fourier transform evaluation of the Fresnel integral for gravitational-wave lensing

Gravitational waves (GWs) exhibit wave-optics effects when their wavelength is comparable to the scale of the gravitational lens. This may occur in lensing from galactic subhalos in GWs emitted by binary black-hole mergers and is gaining interest as a novel probe of dark matter. Predictions for observables in these cases ultimately rely on evaluating a Fresnel integral that quantifies the effect of lensing on the amplitude of a GW at a given frequency. However, numerical evaluation of this Fresnel integral is tricky, and several algorithms and publicly available codes that implement it have been developed. Here, we show that the dependence of this integral on the lens position can be written as a two-dimensional Fourier transform. Modern FFT techniques then enable rapid evaluation at all-sky positions simultaneously for general lenses without symmetry. Vectorization of FFT routines allows for derivatives with respect to model parameters to be obtained with only incremental additional computational cost. If the lens is axisymmetric, further speedups can be achieved with recently developed techniques for nonuniform fast Hankel transforms. To demonstrate, we make available Fresnel Integral Optimization with Nonuniform Transforms (fiona), an efficient and accurate code that is significantly faster than current methods for dense source grids, reaching 2 orders of magnitude speedups for ∼10 6 GW-emitting points. As part of FIONA , we developed code that provides vectorized nonuniform fast Hankel transforms that may have other uses (e.g., calculation of cosmological two-point correlation functions) beyond those considered here.

dark matter↗
DOE OSTI2026

PyJMAK: An Open-Source Python Toolkit for Modeling Solid-State Metallurgical Phase Transformations

Accurate prediction of metallurgical phase transformations is an essential basis for autonomous optimization and rapid part qualification. Several methods can be used to estimate the evolution of phase fractions such as JMAK kinetics-based models, phase-field models, thermodynamic models, and data-driven machine learning models. Thermodynamic and phase-field-based methodologies solve multiphysics equations requiring numerous calibration parameters and significant computational resources. As a result, the computation domain is limited to a point or on order of micron-meters. The data-driven models rely on large datasets from experiments and simulations. While the JMAK model only provides information about phase fraction evolution, it can predict this evolution in near real-time using thermal history and thermodynamic data without restriction on the domain. JMAK models have been popularly used by researchers to model phase transformations occuring during additive manufacturing or over arbitrary temperature profiles. Commercial proprietary software such as Abaqus and Ansys or closed-source in-house implementations offer the ability to model JMAK based kinetics to predict phase transformation. However, these software packages are not open-source or freely available for use and development in conjunction with manufacturing machines, sensors, and machine learning algorithms. In addition, the use of the model is restricted by a license token. In contrast, given temperature profiles at multiple points in the domain, this Python-based PyJMAK model can compute phase evolution in parallel due to its stand-alone modular, voxel-based structure, and it can be executed on high-performance computing resources without any license restrictions.

Prabhune, Bhagya [Oak Ridge National Laboratory (O↗
DOE OSTI2024

300_underground robot (final research report)

Recent advancements in mobile robotics have displayed impressive capabilities in traversing and accessing areas that are inaccessible to humans either due to the characteristics of the environment or potential hazards. Furthermore, these advancements within the field of mobile robotics, more specifically uncrewed ground vehicles (UGVs), give the ability to potentially survey, observe, and map these inaccessible areas for humans. However, one of the most challenging areas to implement this technology is underground environments. The main challenge with implementing this technology in underground environments is the dependence on either GPS or RF communication for UGVs to navigate properly. Therefore, in order to properly demonstrate the mapping capabilities of the UGV this challenge must be resolved. The overall goal of this study is to demonstrate the mapping capabilities of a UGV while addressing this challenge and documenting the implementation and testing phase of the robot. The proposed solution to this challenge is to implement a SLAM algorithm onto the main computational device of the UGV utilizing the Robot Operating System (ROS). The algorithm is the open-source software package Slam Toolbox developed by Steve Macenski. Furthermore, the sllidar_ros2 package from Slamtec will be used to gather the lidar data from an A3M1 2D lidar. A separate program will be created to gather odometry information for our UGV robot. All of these software packages will run together in a Docker environment. Through working on this project I have developed a better understanding of the world of robotics/autonomous systems, especially with applications such as navigation and mapping. Furthermore, through this project, I have been given exposure to how research is conducted within a DOE lab setting. As robotics/autonomous systems become more advanced it's important to pursue more avenues of research such as this project as it will ensure the development of our capabilities.

42 ENGINEERING↗
DOE OSTI2025

Phase-Field Modeling of Damage Evolution in Ceramic Matrix Composite (CMC) and Environmental Barrier Coating (EBC)

Ceramic matrix composites (CMCs) protected by environmental barrier coatings (EBCs) present a promising materials solution for next generation gas turbines. Developments of more robust and efficient EBCs and mechanically tougher CMCs are thus of significant technological importance. Here we develop a phase-field modeling framework that incorporates the thermally grown oxide (TGO), recognized as a critical factor for degradation and failure of EBCs. We simulate crack growth in the TGO and the potential extension into the bond coat / CMC substrate. The model efficiently takes account of the large inelastic deformation induced by the severe volume expansion of TGO, thanks to our recently developed, so-called incremental realization of inelastic deformation (IRID) algorithm. A phase-field model is built for damage evolution in CMCs including crack growth and interfacial sliding. The effects of fiber layout and interfacial sliding on the macroscopic toughness of CMCs are revealed by large-scale simulations and compared to experiments.

advanced energy systems and materials↗
DOE OSTI2025

Elastic Stochastic Full Waveform Inversion (eSFWI)

This collaboration between Lawrence Livermore National Security, LLC (LLNS) as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Chevron USA Inc., acting through its Chevron Technical Center division, aimed at developing next-generation computational methods for the Elastic Stochastic Full Waveform Inversion (eSFWI). Seismic imaging is heavily used in the oil and gas industry for identifying and operating subsurface reservoirs. Improved seismic imaging methods can improve productivity, lower costs, and improve operational and environmental safety. This CRADA demonstrated that new high-performance computing (HPC) architectures being rolled out over the next five years can enable unprecedented seismic imaging resolution when using eSFWI techniques to process active seismic data. An open-source computational mini-application was developed, capable of demonstrating near-peak performance for eSFWI algorithms on CPU and GPU enabled HPC platforms. Performance was demonstrated on LLNL HPC systems such as Lassen, as well as on Chevron systems. This project benefited Chevron USA Inc. by demonstrating the potential computational efficiency of their full waveform inversion capabilities used to characterize oil/gas reservoirs, which in turn benefits the public through potential increases in capabilities to perform analysis of leasing sites.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2025

SolarSTARTS: Solar-Assisted State-Aware and ResilienT infrastructure System

This final technical report provides a description and results of the design, development, testing, and validation of the Automated Resilience Management System (ARMS) solution, which integrates different systems to collect, store and process relevant information from the power distribution system to automatically manage the operation of multiple energy assets to enhance the resilience of the power grid against high-impact physical incidents (e.g., hurricanes) and cyber threats. The developed solution comprises a suite of novel AI-based algorithms designed to first detect, locate, and classify anomalies by collecting and analyzing data from multiple monitoring and control devices

14 SOLAR ENERGY↗
DOE OSTI2026

Optimal Co-Design of Integrated Thermal-Electrical Networks and Control Systems for Grid-interactive Efficient District (GED) Energy Systems

This project advances a unified, open-source framework for the optimal co-design of thermal, electrical, and control systems in grid-interactive efficient districts (GEDs). As communities integrate growing levels of distributed energy resources, traditional approaches that model thermal and electrical networks independently lead to reduced efficiency, limited flexibility, and missed opportunities for coordinated operation. To address these challenges, the research team developed a comprehensive suite of physics-based models, control algorithms, and software tools that enable holistic simulation, optimization, and demonstration of district-scale energy systems.

14 SOLAR ENERGY↗
DOE OSTI2025

Likelihood-Based Particle Identification in SBND

Accurate particle identification is crucial in any high-energy physics experiment, allowing scientists to understand the unique interactions and mechanisms at play in a detector. In this project, I develop and study a likelihood-based particle identification (PID) algorithm for the Short-Baseline Near Detector, which offers a more physically motivated strategy for PID.

Vanderwaal, Sophia [U. Alabama, Huntsville]↗
DOE OSTI2026

Testing the Common Platform LLRF with a 197 MHz NCRF Cavity

The Common Platform is the hardware that will support the new LLRF platform to be used for the Electron-Ion Collider. The Common Platform features a carrier board that is used to interface with a variety of daughter for different applications. This paper details the testing that was done using the Common Platform and an RF Digitizer Daugther Board. Firstly, the firmware and software development is discussed followed by a description of the controls algorithms used in the testing. Then, testing and verification of the platform with a 197 MHz NCRF cavity is discussed. The paper concludes with results from the testing and the path forward.

42 ENGINEERING↗