Search NASA⌕ Search

SEARCH · Search NASA

Results for “Contour method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Numerical thermal analyses of heat exchangers for the stirling engine application

The Regenerator, Cooler and Heater for the NASA Space Power Research Engine (SPRE) have been analyzed in detail for laminar, incompressible and oscillatory flow conditions. Each component has been analyzed independently and in detail with the regenerator being modeled as two-parallel-plates channel with a solid wall. The ends of the channel are exposed to two reservoir maintained at different temperature thus providing an axial temperature gradient along the channel. The cooler and heater components have been modeled as circular pipes with isothermal walls. Two different types of thermal boundary conditions have been investigated for the cooler and heater, namely, symmetric and asymmetric temperature inflow. In symmetric temperature inflow the flow enters the channel with the same temperature in throughout the velocity cycle whereas, in asymmetric temperature inflow the flow enters with a different temperature in each half cycle. The study was conducted over a wide range of Maximum Reynolds number (RE(max) varying from 75 to 60000, Valensi number (Va) from 2.5 to 800, and relative amplitude of fluid displacement (A(sub r) from 0.357 to 1.34. A two dimensional Finite volume method based on the SIMPLE algorithm was used to solve the governing partial differential equations. Post processing programs were developed to effectively describe the heat transfer mechanism under oscillatory flows. The computer code was validated by comparing with existing analytical solutions for oscillating flows. The thermal field have been studied with the help of temperature contour and three dimensional plots. The instantaneous friction factor, wall heat flux and heat transfer coefficient have been examined. It has been concluded that in general, the frictional factor and heat transfer coefficient are higher under oscillatory flow conditions when the Valensi number is high. Also, the thermal efficiency decreases for lower A(r) values. Further, the usual steady state definition for the heat transfer coefficient does not seem to be valid.

Kannapareddy, Mohan Raj↗
DOE OSTI2026

Toward the analytic bootstrap of energy correlators

In this paper, we present a framework for the analytic bootstrap of three-point energy correlators, a crucial observable in $\mathcal{N}$ = 4 super Yang-Mills theory and quantum chromodynamics (QCD). Our approach combines spherical contour techniques, general physical constraints such as pole cancellations, and power correction data in the singular limits to determine its analytic expression. In contrast to previous bootstrap studies restricted to scattering amplitudes for supersymmetric theories, our framework makes use of the properties of Feynman integrals, marking a significant step toward bootstrapping realistic QCD observables. Using this method, we derive analytic expressions for leading-order three-point energy correlators in the multi-collinear limit with equal and unequal energy weights, where the latter are crucial ingredients for projected N -point energy correlators. We also apply the recently developed technique of analytic regression with lattice reduction as a way to bypass needing explicit expressions for the singular limits. Bridging theoretical advances in scattering amplitudes with the renewed interest in weighted cross-sections, our work opens the door to precision tests of QCD dynamics through analytic event-shape predictions.

jet substructure↗
DOE OSTI2021

Understanding the Origin of Tabula Rasa Process-Induced Defects in CZ n-type c-Si

High-temperature annealing, known as Tabula Rasa (TR) has been the subject of recent studies as a method to make n-type CZ silicon material resistant to temperature-induced and process-induced lifetime degradation during solar cell fabrication. In this work, we study the defects responsible for the lifetime changes after TR treatment. We use temperature and injection dependent lifetime spectroscopy (T-IDLS) and the recently introduce defect parameter contour mapping to identify the Energy Level (E t ) and capture cross-section ratio (k) of the most likely process-induced defect. We also present a closer look at changes in surface recombination velocity before and after TR annealing.

bulk lifetime↗
DOE OSTI2025

Toward the Analytic Bootstrap of Energy Correlators

In this paper, we present a framework for the analytic bootstrap of three-point energy correlators, a crucial observable in N = 4 N=4 super Yang-Mills theory and quantum chromodynamics (QCD). Our approach combines spherical contour techniques, general physical constraints such as pole cancellations, and power correction data in the singular limits to determine its analytic expression. In contrast to previous bootstrap studies restricted to scattering amplitudes for supersymmetric theories, our framework makes use of the properties of Feynman integrals, marking a significant step toward bootstrapping realistic QCD observables. Using this method, we derive analytic expressions for leading-order three-point energy correlators with equal and unequal energy weights, where the latter are crucial ingredients for projected N N-point energy correlators. We also apply the recently developed technique of analytic regression with lattice reduction as a way to bypass needing explicit expressions for the singular limits. Bridging theoretical advances in scattering amplitudes with the renewed interest in weighted cross-sections, our work opens the door to precision tests of QCD dynamics through analytic event-shape predictions.

Gong, Jianyu [State Key Laboratory]↗
NASA NTRS1984

Wave drag as the objective function in transonic fighter wing optimization

The original computational method for determining wave drag in a three dimensional transonic analysis method was replaced by a wave drag formula based on the loss in momentum across an isentropic shock. This formula was used as the objective function in a numerical optimization procedure to reduce the wave drag of a fighter wing at transonic maneuver conditions. The optimization procedure minimized wave drag through modifications to the wing section contours defined by a wing profile shape function. A significant reduction in wave drag was achieved while maintaining a high lift coefficient. Comparisons of the pressure distributions for the initial and optimized wing geometries showed significant reductions in the leading-edge peaks and shock strength across the span.

Phillips, P. S.↗
NASA NTRS1994

Numerical study of the effects of icing on viscous flow over wings

An improved hybrid method for computing unsteady compressible viscous flows is presented. This method divides the computational domain into two zones. In the outer zone, the unsteady full-potential equation (FPE) is solved. In the inner zone, the Navier-Stokes equations are solved using a diagonal form of an alternating-direction implicit (ADI) approximate factorization procedure. The two zones are tightly coupled so that steady and unsteady flows may be efficiently solved. Characteristic-based viscous/inviscid interface boundary conditions are employed to avoid spurious reflections at that interface. The resulting CPU times are less than 60 percent of that required for a full-blown Navier-Stokes analysis for steady flow applications and about 60 percent of the Navier-Stokes CPU times for unsteady flows in non-vector processing machines. Applications of the method are presented for a rectangular NACA 0012 wing in low subsonic steady flow at moderate and high angles of attack, and for an F-5 wing in steady and unsteady subsonic and transonic flows. Steady surface pressures are in very good agreement with experimental data and are essentially identical to Navier-Stokes predictions. Density contours show that shocks cross the viscous/inviscid interface smoothly, so that the accuracy of full Navier-Stokes equations can be retained with a significant savings in computational time.

Sankar, L. N.↗
NASA NTRS1980

Application of advanced computational procedures for modeling solar-wind interactions with Venus: Theory and computer code

Computational procedures are developed and applied to the prediction of solar wind interaction with nonmagnetic terrestrial planet atmospheres, with particular emphasis to Venus. The theoretical method is based on a single fluid, steady, dissipationless, magnetohydrodynamic continuum model, and is appropriate for the calculation of axisymmetric, supersonic, super-Alfvenic solar wind flow past terrestrial planets. The procedures, which consist of finite difference codes to determine the gasdynamic properties and a variety of special purpose codes to determine the frozen magnetic field, streamlines, contours, plots, etc. of the flow, are organized into one computational program. Theoretical results based upon these procedures are reported for a wide variety of solar wind conditions and ionopause obstacle shapes. Plasma and magnetic field comparisons in the ionosheath are also provided with actual spacecraft data obtained by the Pioneer Venus Orbiter.

Stahara, S. S.↗
NASA NTRS1972

Lunar topography - Global determination by radar.

Previous methods used for two-dimensional radar mapping of the moon are contrasted with new techniques that add altitude information to the radar map. Delay-Doppler stereoscopy and delay-Doppler interferometry are shown to provide surface-height variations with higher accuracy and better global fidelity than has been possible previously. Sample results are presented for altitude contours on the moon as obtained with the Haystack and Westford radar systems of the Massachusetts Institute of Technology. An appendix describes the mathematical principles of delay-Doppler interferometry in determining the position of an arbitrary reflecting region of the lunar surface from measurements of the time delay, Doppler shift, and fringe phase of radar echoes from that region.

Shapiro, I. I.↗
NASA NTRS1984

Direct numerical simulation of curved turbulent channel flow

Low Reynolds number, mildly curved, turbulent channel flow has been simulated numerically without subgrid scale models. A new spectral numerical method developed for this problem was used, and the computations were performed with 2 million degrees of freedom. A variety of statistical and structural information has been extracted from the computed flow fields. These include mean velocity, turbulence stresses, velocity skewness, and flatness factors, space time correlations and spectra, all the terms in the Reynolds stress balance equations, and contour and vector plots of instantaneous velocity fields. The effects of curvature on this flow were determined by comparing the concave and convex sides of the channel. The observed effects are consistent with experimental observations for mild curvature. The most significant difference in the turbulence statistics between the concave and convex sides was in the Reynolds shear stress. This was accompanied by significant differences in the terms of the Reynolds shear stress balance equations. In addition, it was found that stationary Taylor-Gortler vortices were present and that they had a significant effect on the flow by contributing to the mean Reynolds shear stress, and by affecting the underlying turbulence.

Moser, R. D.↗
DOE OSTI2020

The impact of tillage row orientation on physical and chemical sediment enrichment

Abstract This study aimed to better understand how tillage row orientation with respect to dominant flow‐pathway along hillslope impacts runoff and the transport of different sediment size fractions. Experimental plots were constructed in contour ridge till (CRT) and parallel ridge till (PRT) sites to monitor runoff and sediment fluxes. Particle size fractions of the sediment, along with organic C and N contents were measured to quantify physical and chemical enrichment ratios for the two tillage orientations. In the CRT plot, tillage produced large oriented roughness elements along the contours, which acted as little check dams, while in the PRT site, the roughness elements helped confine and concentrate the runoff. In the CRT, the “check dams” resulted in a runoff coefficient of .03, while in the PRT, the flow confinement between rows produced a runoff coefficient of .82. Moreover, the erosion rates at the CRT site were 97% less than those in the PRT plot. Large contours produced finer sediment fractions due to the selective sorting in ponded furrows. More aggregate sediment fractions were present in the PRT site, which was dominated by rill erosion. Physical enrichment revealed selective entrainment of finer sediment particles during erosion. Finer‐grain particles with higher specific surface areas, attached more organic C resulting in chemical enrichment. Physical and chemical enrichment methods were found to be in good agreement. These findings suggest transport models that can simulate size fraction updates to the soil active layer can be used to estimate SOC redistribution and hence more accurate C budgets.

Wacha, Kenneth M.↗
NASA NTRS1976

A FORTRAN program for the analysis of linear continuous and sample-data systems

A FORTRAN digital computer program which performs the general analysis of linearized control systems is described. State variable techniques are used to analyze continuous, discrete, and sampled data systems. Analysis options include the calculation of system eigenvalues, transfer functions, root loci, root contours, frequency responses, power spectra, and transient responses for open- and closed-loop systems. A flexible data input format allows the user to define systems in a variety of representations. Data may be entered by inputing explicit data matrices or matrices constructed in user written subroutines, by specifying transfer function block diagrams, or by using a combination of these methods.

Edwards, J. W.↗
NASA NTRS1977

Three-dimensional modelling in magnetotelluric and magnetic variational sounding

The Galerkin finite-element method is used to obtain approximate solutions for the three-dimensional induction problem. A rectangular conductive prism is considered as an example, and solutions are obtained for linear and circularly polarized incident plane-wave fields. Magnetotelluric tensor impedances and magnetic transfer functions are computed. Polar diagrams of the tensor impedances and magnetic transfer functions along with their amplitude contour maps are presented. The dimensionality parameter, skew, is contoured at the surface of the earth. It is shown that the relative amplitudes and shapes of the additional and principal impedance polar diagrams can be used to determine the dimensionality of geoelectrical structures. Stations with skew values greater than 0.2 are significantly influenced by the three-dimensionality of the geoelectric structure. The amplitudes of the magnetic transfer function and the orientations of its polar diagrams exhibit large anomalies in the vicinity of the intersection of the lateral contacts.

Reddy, I. K.↗
NASA NTRS1981

Mesh generation by conformal and quasiconformal mappings

It is pointed out that many recent advances in the finite-difference solution of elliptic equations have been limited to regions whose boundary contours coincide with coordinate lines of the Cartesian coordinate system. The reason for this is related to the fact that in the case of an arbitrary curvilinear coordinate system the original equation becomes much more complex. However, there is no added complexity if an orthogonal coordinate system is generated from a conformal mapping. In the present investigation, a finite difference method developed for the construction of conformal mappings has been generalized to construct quasi-conformal mappings. It is expected that the use of more sophisticated numerical algorithms could lead to improvements in both speed and accuracy. Quasi-conformal mappings have applications not only in the solution of elliptic equations but also in other areas such as orthogonal mesh generation on surfaces and the solution of certain fluid flow problems.

Mastin, C. W.↗
NASA NTRS1986

Flight research on natural laminar flow nacelles - A progress report

This paper presents a progress report on an ongoing flight experiment for natural laminar flow nacelles. The results given herein were obtained during the first phase of the experiment, in which an instrumented natural laminar flow nacelle fairing was flight tested in the presence of turbofan engine noise and a controlled noise source. The results indicate that with the controlled noise source off, natural laminar flow was measured as far aft as 37 percent of the fairing length. The transition front was irregular in contour, and the extent of natural laminar flow was significantly affected by the relative flow angle for the fairing. In addition to these test results, the paper discusses the results of some recent computational analyses to predict pressure distributions and transition location, and to explain some of the data trends. Comparisons between measured and predicted data indicate that the analytical methods successfully predicted trends for the baseline (no controlled noise source) studies.

Hastings, E. C., Jr.↗
NASA NTRS1986

Statistics of equivalent width data and new oscillator strengths for Si II, Fe II, and Mn II

Equivalent width data from Copernicus and IUE appear to have an exponential, rather than a Gaussian distribution of errors. This is probably because there is one dominant source of error: the assignment of the background continuum shape. The maximum likelihood method of parameter estimation is presented for the case of exponential statistics, in enough generality for application to many problems. The method is applied to global fitting of Si II, Fe II, and Mn II oscillator strengths and interstellar gas parameters along many lines of sight. The new values agree in general with previous determinations but are usually much more tightly constrained. Finally, it is shown that care must be taken in deriving acceptable regions of parameter space because the probability contours are not generally ellipses whose axes are parallel to the coordinate axes.

Van Buren, Dave↗
NASA NTRS2006

On the Mixing of Single and Opposed Rows of Jets With a Confined Crossflow

The primary objectives of this study were 1) to demonstrate that contour plots could be made using the data interface in the NASA GRC jet-in-crossflow (JIC) spreadsheet, and 2) to investigate the suitability of using superposition for the case of opposed rows of jets with their centerlines in-line. The current report is similar to NASA/TM-2005-213137 but the "basic" effects of a confined JIC that are shown in profile plots there are shown as contour plots in this report, and profile plots for opposed rows of aligned jets are presented here using both symmetry and superposition models. Although superposition was found to be suitable for most cases of opposed rows of jets with jet centerlines in-line, the calculation procedure in the JIC spreadsheet was not changed and it still uses the symmetry method for this case, as did all previous publications of the NASA empirical model.

Holdeman, James D.↗
NASA NTRS2013

Longitudinally Jointed Edge-wise Compression Honeycomb Composite Sandwich Coupon Testing and FE Analysis: Three Methods of Strain Measurement, and Comparison

Three means (i.e., typical foil strain gages, fiber optic sensors, and a digital image correlation (DIC) system) were implemented to measure strains on the back and front surfaces of a longitudinally jointed curved test article subjected to edge-wise compression testing, at NASA Goddard Space Flight Center, according to ASTM C364. The Pre-test finite element analysis (FEA) was conducted to assess ultimate failure load and predict strain distribution pattern throughout the test coupon. The predicted strain pattern contours were then utilized as guidelines for installing the strain measurement instrumentations. The strain gages and fiber optic sensors were bonded on the specimen at locations with nearly the same strain values, as close as possible to each other, so that, comparisons between the measured strains by strain gages and fiber optic sensors, as well as the DIC system are justified. The test article was loaded to failure (at approximately 38 kips), at the strain value of approximately 10,000mu epsilon As a part of this study, the validity of the measured strains by fiber optic sensors is examined against the strain gage and DIC data, and also will be compared with FEA predictions.

Farrokh, Babak↗
NASA NTRS1976

Testing electroexplosive devices by programmed pulsing techniques

A novel method for testing electroexplosive devices is proposed wherein capacitor discharge pulses, with increasing energy in a step-wise fashion, are delivered to the device under test. The size of the energy increment can be programmed so that firing takes place after many, or after only a few, steps. The testing cycle is automatically terminated upon firing. An energy-firing contour relating the energy required to the programmed step size describes the single-pulse firing energy and the possible sensitization or desensitization of the explosive device.

Rosenthal, L. A.↗