Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reference Model 5”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Beyond the CMSSM without an accelerator: Proton decay and direct dark matter detection

Here, we consider two potential non-accelerator signatures of generalizations of the well-studied constrained minimal supersymmetric standard model (CMSSM). In one generalization, the universality constraints on soft supersymmetry-breaking parameters are applied at some input scale M in below the grand unification (GUT) scale M GUT , a scenario referred to as ‘sub-GUT’. The other generalization we consider is to retain GUT-scale universality for the squark and slepton masses, but to relax universality for the soft supersymmetry-breaking contributions to the masses of the Higgs doublets. As with other CMSSM-like models, the measured Higgs mass requires supersymmetric particle masses near or beyond the TeV scale. Because of these rather heavy sparticle masses, the embedding of these CMSSM-like models in a minimal SU(5) model of grand unification can yield a proton lifetime consistent with current experimental limits, and may be accessible in existing and future proton decay experiments. Another possible signature of these CMSSM-like models is direct detection of supersymmetric dark matter. The direct dark matter scattering rate is typically below the reach of the LUX-ZEPLIN (LZ) experiment if M in is close to M GUT , but it may lie within its reach if M in ≲10 11 GeV. Likewise, generalizing the CMSSM to allow non-universal supersymmetry-breaking contributions to the Higgs offers extensive possibilities for models within reach of the LZ experiment that have long proton lifetimes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Gravitational model improvement at the Goddard Space Flight Center

Major new computations of terrestrial gravitational field models were performed by the Geodynamics Branch of Goddard Space Flight Center (GSFC). This development has incorporated the present state of the art results in satellite geodesy and have relied upon a more consistent set of reference constants than was heretofore utilized in GSFC's GEM models. The solutions are complete in spherical harmonic coefficients out to degree 50 for the gravity field parameters. These models include adjustment for a subset of 66 ocean tidal coefficients for the long wavelength components of 12 major ocean tides. This tidal adjustment was made in the presence of 550 other fixed ocean tidal terms representing 32 major and minor ocean tides and the Wahr frequency dependent solid earth tidal model. In addition 5-day averaged values for Earth rotation and polar motion were derived for the time period of 1980 onward. Two types of models were computed. These are satellite only models relying exclusively on tracking data and combination models which have incorporated satellite altimetry and surface gravity data. The satellite observational data base consists of over 1100 orbital arcs of data on 31 satellites. A large percentage of these observations were provided by third generation laser stations (less than 5 cm). A calibration of the model accuracy of the GEM-T2 satellite only solution indicated that it was a significant improvement over previous models based solely upon tracking data. The rms geoid error for this field is 110 cm to degree and order 36. This is a major advancement over GEM-T1 whose errors were estimated to be 160 cm. An error propagation using the covariances of the GEM-T2 model for the TOPEX radial orbit component indicates that the rms radial errors are expected to be 12 cm. The combination solution, PGS-3337, is a preliminary effort leading to the development of GEM-T3. PGS-3337 has incorporated global sets of surface gravity data and the Seasat altimetry to produce a model complete to (50,50). A solution for the dynamic ocean topography to degree and order 10 was included as part of this adjustment.

Marsh, J. G.↗

Theoretical models of polar-cap convection under the influence of a northward interplanetary magnetic field

The unexpected patterns of high-latitude auroral luminosity and ionospheric convection that are observed when the interplanetary magnetic field (IMF) has a northward orientation have inspired a variety of theoretical interpretations. The existing models, all referring to steady-state conditions, can be classified according to the topology of the polar magnetic field lines and of the polar-cap convection streamlines. The classes of model include: (1) a closed magnetosphere model, (2) a conventional open model with a distorted, but topologically unchanged, polar-cap boundary, (3) a conventional open model with distorted, but topologically unchanged, polar-cap convection cells, (4) a modified open model with 'lobe convection cells' contained wholly on open magnetic-field lines, and (5) a modified open model with a bifurcated polar cap. The third and fourth types require significant regions of sunward flow on open polar-cap field lines, a concept that presents serious theoretical difficulties. The other three types appear equally viable from a theoretical point of view, and the comparison against observations is an ongoing enterprise. Outstanding theoretical questions include (a) how do observed structures in the polar ionosphere map along magnetic field lines into the magnetosphere?, (b) what is the mechanism that drives the observed sunward convection at highest latitudes on the day side?, and (c) what role does time dependence play in the observed phenomena?

Hill, T. W.↗

Simulation of a Periodic Jet in a Crossflow with a RANS Solver Using an Unstructured Grid

A second-order unstructured-grid code, developed and used primarily for steady aerodynamic simulations, is applied to the synthetic jet in a cross flow. The code, FUN3D, is a vertex-centered finite-volume method originally developed by Anderson[1, 2], and is currently supported by members of the Fast Adaptive Aerospace Tools team at NASA Langley. Used primarily for design[3] and analysis[4] of steady aerodynamic configurations, FUN3D incorporates a discrete adjoint capability, and supports parallel computations using MPI. A detailed description of the FUN3D code can be found in the references given above. The code is under continuous development and contains a variety of flux splitting algorithms for the inviscid terms, two methods for computing gradients, several turbulence models, and several solution methodologies; all in varying states of development. Only the most robust and reliable components, based on experiences with steady aerodynamic simulations, were employed in this work. As applied in this work, FUN3D solves the Reynolds averaged Navier-Stokes equations using the one equation turbulence model of Spalart and Allmaras[5]. The spatial discretization is formed on unstructured meshes using a vertex-centered approach. The inviscid terms are evaluated by a flux-difference splitting formulation using least-squares reconstruction and Roe-type approximate Riemann fluxes. Green-Gauss gradient evaluations are used for viscous and turbulence modeling terms. The discrete spatial operator is combined with a backward time operator which is then solved iteratively using point or line Gauss-Seidel and local time stepping in a pseudo time. For steady flows, the physical time step is set to infinity and the pseudo time step is ramped up with the iteration count. A second-order backward in time operator is used for time accurate flows with 20 to 50 steps in the pseudo time applied at each physical time step. For this effort, FUN3D was modified to support spatially varying boundary and initial conditions, and unsteady boundary conditions. Also, a specialized in/out flow boundary condition was implemented to model the action of the diaphragm. This boundary condition is described below in more detail. The grids were generated using the internally developed codes GridEX[6] for meshing the surfaces and inviscid regions of the domain, and for CAD access; and MesherX[7] for meshing the viscous regions. Grid spacing in on the surfaces and in the inviscid regions are indirectly controlled by specifying sources. The viscous layers are generated using an advancing layer technique. MeshersX allows the user to control the spatial variation of the first step off the surface, growth rates, and the termination criterion by providing small problem dependent subroutines.

Atkins, H. L.↗

Risk Presentation Using the Three Dimensions of Likelihood, Severity, and Level of Control

Traditional hazard analysis techniques utilize a two-dimensional representation of the results determined by relative likelihood and severity of the residual risk. These matrices present a quick-look at the Likelihood (Y-axis) and Severity (X-axis) of the probable outcome of a hazardous event. A three-dimensional method, described herein, utilizes the traditional X and Y axes, while adding a new, third dimension, shown as the Z-axis, and referred to as the Level of Control. The elements of the Z-axis are modifications of the Hazard Elimination and Control steps (also known as the Hazard Reduction Precedence Sequence). These steps are: 1. Eliminate risk through design. 2. Substitute less risky materials for more hazardous materials. 3. Install safety devices. 4. Install caution and warning devices. 5. Develop administrative controls (to include special procedures and training.) 6. Provide protective clothing and equipment. When added to the two-dimensional models, the level of control adds a visual representation of the risk associated with the hazardous condition, creating a tall-pole for the leastwell-controlled failure while establishing the relative likelihood and severity of all causes and effects for an identified hazard. Computer modeling of the analytical results, using spreadsheets and three-dimensional charting gives a visual confirmation of the relationship between causes and their controls.

Watson, Clifford↗

Risk Assessment Using the Three Dimensions of Probability (Likelihood), Severity, and Level of Control

Traditional hazard analysis techniques utilize a two-dimensional representation of the results determined by relative likelihood and severity of the residual risk. These matrices present a quick-look at the Likelihood (Y-axis) and Severity (X-axis) of the probable outcome of a hazardous event. A three-dimensional method, described herein, utilizes the traditional X and Y axes, while adding a new, third dimension, shown as the Z-axis, and referred to as the Level of Control. The elements of the Z-axis are modifications of the Hazard Elimination and Control steps (also known as the Hazard Reduction Precedence Sequence). These steps are: 1. Eliminate risk through design. 2. Substitute less risky materials for more hazardous materials. 3. Install safety devices. 4. Install caution and warning devices. 5. Develop administrative controls (to include special procedures and training.) 6. Provide protective clothing and equipment. When added to the two-dimensional models, the level of control adds a visual representation of the risk associated with the hazardous condition, creating a tall-pole for the least-well-controlled failure while establishing the relative likelihood and severity of all causes and effects for an identified hazard. Computer modeling of the analytical results, using spreadsheets and three-dimensional charting gives a visual confirmation of the relationship between causes and their controls.

Watson, Clifford C.↗

Performance and Costs of Ductless Heat Pumps in Marine-Climate High-Performance Homes Habitat for Humanity The Woods

The Washington State University (WSU) Energy Program's Building America (BA) team conducted a case study of a high-performance affordable housing community: The Woods (Figure 1). This BA effort is part of a larger-scale study of 30 homes funded from 2013-2016 by Tacoma Public Utilities (TPU) and the Bonneville Power Administration. The Woods is a Habitat for Humanity (HFH) community of homes certified by ENERGY STAR Homes Northwest (ESHNW); the community is in the marine climate of Tacoma/Pierce County, Washington. This research report builds on an earlier preliminary draft 2014 BA report and includes significant billing analysis and cost-effectiveness research from a collaborative and ongoing DHP research effort for TPU and the Bonneville Power Administration. This final BA report focuses on the results of field testing, modeling, and monitoring of ductless mini-split heat pump hybrid heating systems in seven homes built and first occupied at various times between September 2013 and October 2014. The report also provides WSU documentation of high-performance home observations, lessons learned, and stakeholder recommendations for builders of affordable high-performance housing. The research goal of the U.S. Department of Energy's BA research team Building America Partnership for Improved Residential Construction was to compare a ductless heat pump (DHP) hybrid system (DHP in common area/electric resistance [ER] in bedrooms) to an all-electric zonal ER system in high-performance single-family affordable housing. This effort included assessing the costs and benefits of a DHP/ER hybrid system located in the main living area to offset the primary heating demand of zonal ER heaters in the bedroom zones and comparing these findings to data from of new affordable single-family housing in Washington State. This report includes: (1) Measured indoor and outdoor temperatures and relative humidity (RH) in the homes. (2) Field testing results of heating, ventilating, and air-conditioning equipment; ventilation system airflows; building envelope tightness; lighting, appliance, and other input data required for preliminary Building Energy Optimization (BEopt) modeling; and ENERGY STAR field verification (3) BEopt modeling results compared to measured energy use. (4) A comparison of the space heat energy consumption of a DHP/ER hybrid heating system and a traditional zonal ER heating system installed in the same home. This comparison is made by implementing a series of weekly "flip-flop tests" (referred to here as "switchback" tests per TPU) to compare space heating, temperature, and RH in zonal ER heating mode with a DHP/ER mode as discussed in the Building America Test Plan (Lubliner 2010a). (5) Cost data from HFH and other sources related to building efficiency measures focusing on the DHP/ER hybrid heating system. (6) An evaluation of the thermal performance and cost benefit of DHP/ER hybrid heating systems in these high-performance homes employing life cycle cost analysis for energy code policy and monthly cash flow analysis of HFH homeowners. (7) Post-monitoring occupant survey results. The report also provides the following stakeholder findings and recommendations: (1) DHP single-head systems at The Woods are cost-effective to new homebuyers of these high-performance all-electric homes. (2) Stakeholder education is needed on design, inspection, and commissioning; documentation is needed for heat recovery ventilation (HRV) and from ENERGY STAR builders, verifiers, and inspectors to help ensure that the houses meet the goal of "build tight, ventilate right." (3) A code gap in inspection and enforcement was identified that should be addressed by: (3a) Improving the fire marshal's approach to sprinkler attic piping freeze protection; (3b) Improving the maintenance of ceiling insulation continuity; and (3c) Educating the local building inspector on attic insulation inspection concerns that allow for maximizing design improveme...

affordable housing↗

Deucalionis Regio, Mars: Evidence for a unique mineralogic endmember and a crusted surface

A small equatorial region south of Sinus Meridiani, Deucalionis Regio, has been found spectrally distinct from other regions as seen in a high spectral resolution telescopic image of the meridian hemisphere of Mars. Analysis of Viking IRTM and other related data suggest that Deucalionis Regio has a crusted surface. The crust-bonding minerals may contribute to the spectral uniqueness of this region. Two independent analyses of spectral images, linear spectral mixing and supervised classification based on the spectral shapes, showed that in addition to the well-known spectral endmember regions in this image (western Arabia, south Acidalia, and Sinus Meridiani), Deucalionis Regio has spectral properties that are unique enough to make it a principle endmember unit. In those earlier works, Deucalionis Regio was referred to as 'Meridiani Border.' Analysis of thermal inertia, rock abundance, and albedo information derived from Viking images and Infrared Thermal Mapper (IRTM) data obtained 1977-80 also indicate that Deucalionis Regio has a surface of distinctly different physical properties when compared to Arabia, Sinus Meridiani, and Acidalia. Deucalionis Regio has a thermal inertia equivalent to the Martian average, a low rock abundance (less than 5 percent), and an intermediate albedo and color. Considerable effort by previous investigators has revealed a consistent model for the surface (upper few cm) properties of the endmember reigons Arabia, Sinus Meridiani, and Acidalia. Compared with these regions, we consider that Deucalionis Regio is not a region of either (1) unconsolidated, fine bright dust like Arabia, (2) considerable windblown unconsolidated sand like Sinus Meridiani, or (3) a rocky-and-sandy surface like Acidalia. Thus, we are forced to consider that either the surface of Deucalionis Regio is made of unconsolidated fine to medium sand (about 250 microns) of an unusual and previously unreported color and albedo, or that the surface is crusted, fine-grained weathered soil, and the thermal inertia is an indicator of the degree to which the surface sediments have become indurated. We favor the latter.

Merenyi, E.↗

Comparison of Non-Combusting Spray Fields in a Model Combustor using Shadowgraphy

Droplet sizes were measured using shadowgraphy in the spray issuing from the center element of the baseline configuration of the NASA 7-element lean direct injector (LDI) array. Each LDI element consisted of a 60 degree clockwise axial air swirler, converging-diverging venturi, and a pressure-swirl atomizer positioned with its tip at the venturi throat. The non-combusting measurements were conducted using water spray in a 3-inch diameter research combustor operating at pressure of 5 bar and air inlet temperature of 700 K. At these inlet conditions, three air flow rates were used, producing reference velocities of 7.6, 15.2, and 22.9 m/s. Only the center nozzle was used. At each reference velocity, water flow rates were adjusted to simulate a common equivalence. Data were collected at a frame rate of 15 Hz over a range of positions near the LDI dump plane, and downstream, along the combustor centerline. Velocity measurements were achieved by use of a dual head Nd:YAG laser and frame transfer PIV camera. Droplet size and velocity, mass and number density, and volume fraction are compared at these inlet conditions to determine the effect of nozzle pressure drop on the measured properties.

lean direct injection↗

Comparison of Non-Combusting Spray Fields in a Model Combustor using Shadowgraphy

Droplet sizes were measured using shadowgraphy in the spray issuing from the center element of the baseline configuration of the NASA 7-element lean direct injector (LDI) array. Each LDI element consisted of a 60 degree clockwise axial air swirler, converging-diverging venturi, and a pressure-swirl atomizer positioned with its tip at the venturi throat. The non-combusting measurements were conducted using water spray in a 3-inch diameter research combustor operating at pressure of 5 bar and air inlet temperature of 700 K. At these inlet conditions, three air flow rates were used, producing reference velocities of 7.6, 15.2, and 22.9 m/s. Only the center nozzle was used. At each reference velocity, water flow rates were adjusted to simulate a common equivalence. Data were collected at a frame rate of 15 Hz over a range of positions near the LDI dump plane, and downstream, along the combustor centerline. Velocity measurements were achieved by use of a dual head Nd:YAG laser and frame transfer PIV camera. Droplet size and velocity, mass and number density, and volume fraction are compared at these inlet conditions to determine the effect of nozzle pressure drop on the measured properties.

lean direct injection↗

Dynamic projection of anthropogenic emissions in China: methodology and 2015–2050 emission pathways under a range of socio-economic, climate policy, and pollution control scenarios

Abstract. Future trends in air pollution and greenhouse gas (GHG)emissions for China are of great concern to the community. A set of globalscenarios regarding future socio-economic and climate developments, combiningshared socio-economic pathways (SSPs) with climate forcing outcomes asdescribed by the Representative Concentration Pathways (RCPs), was createdby the Intergovernmental Panel on Climate Change (IPCC). Chinese researchers have also developed various emission scenarios by considering detailed local environmental and climate policies. However, a comprehensive scenario set connecting SSP–RCP scenarios with local policies and representing dynamic emission changes under local policies is still missing. In this work, to fill this gap, we developed a dynamic projection model, the Dynamic Projection model for Emissions in China (DPEC), to explore China'sfuture anthropogenic emission pathways. The DPEC is designed tointegrate the energy system model, emission inventory model, dynamicprojection model, and parameterized scheme of Chinese policies. The modelcontains two main modules, an energy-model-driven activity rate projectionmodule and a sector-based emission projection module. The activity rateprojection module provides the standardized and unified future energyscenarios after reorganizing and refining the outputs from the energy systemmodel. Here we use a new China-focused version of the Global ChangeAssessment Model (GCAM-China) to project future energy demand and supply inChina under different SSP–RCP scenarios at the provincial level. Theemission projection module links a bottom-up emission inventory model, theMulti-resolution Emission Inventory for China (MEIC), to GCAM-China andaccurately tracks the evolution of future combustion and production technologiesand control measures under different environmental policies. We developedtechnology-based turnover models for several key emitting sectors (e.g.coal-fired power plants, key industries, and on-road transportationsectors), which can simulate the dynamic changes in the unit/vehicle fleetturnover process by tracking the lifespan of each unit/vehicle on an annualbasis. With the integrated modelling framework, we connected five SSP scenarios(SSP1–5), five RCP scenarios (RCP8.5, 7.0, 6.0, 4.5, and 2.6), and threepollution control scenarios (business as usual, BAU; enhanced controlpolicy, ECP; and best health effect, BHE) to produce six combined emissionscenarios. With those scenarios, we presented a wide range of China's futureemissions to 2050 under different development and policy pathways. We foundthat, with a combination of strong low-carbon policy and air pollutioncontrol policy (i.e. SSP1-26-BHE scenario), emissions of major airpollutants (i.e. SO 2 , NO x , PM 2.5 , and non-methane volatile organic compounds – NMVOCs) in China willbe reduced by 34%–66% in 2030 and 58%–87% in 2050 compared to 2015. End-of-pipe control measures are more effective for reducing air pollutant emissions before 2030, while low-carbon policy will play a more important rolein continuous emission reduction until 2050. In contrast, China's emissionswill remain at a high level until 2050 under a reference scenario without activeactions (i.e. SSP3-70-BAU). Compared to similar scenarios set from theCMIP6 (Coupled Model Intercomparison Project Phase 6), our estimates ofemission ranges are much lower than the estimates from the harmonized CMIP6 emissions dataset in2020–2030, but their emission ranges become similar in the year 2050.

54 ENVIRONMENTAL SCIENCES↗

Flight evaluation of differential GPS aided inertial navigation systems

Algorithms are described for integration of Differential Global Positioning System (DGPS) data with Inertial Navigation System (INS) data to provide an integrated DGPS/INS navigation system. The objective is to establish the benefits that can be achieved through various levels of integration of DGPS with INS for precision navigation. An eight state Kalman filter integration was implemented in real-time on a twin turbo-prop transport aircraft to evaluate system performance during terminal approach and landing operations. A fully integrated DGPS/INS system is also presented which models accelerometer and rate-gyro measurement errors plus position, velocity, and attitude errors. The fully integrated system was implemented off-line using range-domain (seventeen-state) and position domain (fifteen-state) Kalman filters. Both filter integration approaches were evaluated using data collected during the flight test. Flight-test data consisted of measurements from a 5 channel Precision Code GPS receiver, a strap-down Inertial Navigation Unit (INU), and GPS satellite differential range corrections from a ground reference station. The aircraft was laser tracked to determine its true position. Results indicate that there is no significant improvement in positioning accuracy with the higher levels of DGPS/INS integration. All three systems provided high-frequency (e.g., 20 Hz) estimates of position and velocity. The fully integrated system provided estimates of inertial sensor errors which may be used to improve INS navigation accuracy should GPS become unavailable, and improved estimates of acceleration, attitude, and body rates which can be used for guidance and control. Precision Code DGPS/INS positioning accuracy (root-mean-square) was 1.0 m cross-track and 3.0 m vertical. (This AGARDograph was sponsored by the Guidance and Control Panel.)

Mcnally, B. David↗

A Critical Survey of Optimization Models for Tactical and Strategic Aspects of Air Traffic Flow Management

This document presents a critical review of the principal existing optimization models that have been applied to Air Traffic Flow Management (TFM). Emphasis will be placed on two problems, the Generalized Tactical Flow Management Problem (GTFMP) and the Ground Holding Problem (GHP), as well as on some of their variations. To perform this task, we have carried out an extensive literature review that has covered more than 40 references, most of them very recent. Based on the review of this emerging field our objectives were to: (i) identify the best available models; (ii) describe typical contexts for applications of the models; (iii) provide illustrative model formulations; and (iv) identify the methodologies that can be used to solve the models. We shall begin our presentation below by providing a brief context for the models that we are reviewing. In Section 3 we shall offer a taxonomy and identify four classes of models for review. In Sections 4, 5, and 6 we shall then review, respectively, models for the Single-Airport Ground Holding Problem, the Generalized Tactical FM P and the Multi-Airport Ground Holding Problem (for the definition of these problems see Section 3 below). In each section, we identify the best available models and discuss briefly their computational performance and applications, if any, to date. Section 7 summarizes our conclusions about the state of the art.

Bertsimas, Dimitris↗

Simulation of Tropical Biomass Burning

The research objectives that were achieved during the course of our studies include the following: (1) Over the last few years, a model has been developed in the Atmospheric Chemistry and Dynamics Branch at Ames Research Center in collaboration with the Physics Department at San Jose State University. It is referred to as the Global/Regional Atmospheric Chemistry Event Simulator (GRACES). Currently, the GRACES model system combines an atmospheric chemistry and transport model, and a regional mesoscale meteorological model. Therefore this system is suitable for simulating the conditions observed by the tropical observation missions, such as the Pacific Exploratory Mission in the 'Tropics (PEM-Tropics), Study of Ozone and Nitrogen oxides Experiment (SONEX), and other periods. Specifically, the research carried out included the evaluation of the behavior of several components of the MM5 (I.e., Meteorological Model 5, version 2) and the GRACES combined modeling system. We initiated research on (a) the ability of the MM5 model to assimilate downward vertical velocities at least as high as the analyses, (b) the ability of the Graces model to incorporate the vertical velocities from MM5, and (c) other factors related to transport patterns required to transport CO in the observed manner. We carried out improved calculations of the transport of tracers for both NASA airborne missions, SONEX and PEM-Tropics. We also made improved source strength estimates fopr isoprene dust, and similar emissions from the Earths surface. This required the use of newly available databases on the Earth's surface and vegetation. We completed atmospheric chemistry simulations of radicals and nitrogen oxide species. We have greatly improved the handling of cumulonimnbus convection by modifing an existing scheme.

Hamill, Patrick↗

A global geodetic reference frame from Lageos ranging (SL5.1AP)

A summary of the results obtained for a new comprehensive geodetic parameter solution from the analysis of Lageos laser ranging data for the period May 1976 to the end of 1982 is presented. Estimates of each component of the polar motion and earth rotation, the station coordinates, the value of the earth's gravitational constant GM, and the elements of the Lageos orbit comprise this SL5.1AP solution. The results differ from previously published values primarily through incorporation of more rigorous dynamic models for the ocean and solid earth tides. The precision of the geodetic parameters are on average 5-marc sec polar motion, 0.2-ms length of day, better than 5-cm center-of-mass geodetic positioning, 3-cm global baselines, and 2-cm regional baselines. An assessment of the contribution of systematic errors in the interstation distance determination is presented.

Smith, D. E.↗

How correlations change the magnetic structure factor of the kagome Hubbard model

The kagome Hubbard model (KHM) is a paradigmatic example of a frustrated two-dimensional model. While its strongly correlated regime, described by a Heisenberg model, is of topical interest due to its enigmatic prospective spin-liquid ground state, the weakly and moderately correlated regimes remain largely unexplored. Motivated by the rapidly growing number of metallic kagome materials (e.g., Mn 3 Sn, Fe 3 Sn 2 , FeSn, Co 3 Sn 2 S 2 , Gd 3 Ru 4 Al 12 , and AV 3 Sb 5 with A = K, Rb, Cs), here we study the respective regimes of the KHM by means of three complementary numerical methods: the dynamical mean-field theory, the dynamical vertex approximation, and determinant quantum Monte Carlo. In contrast to the archetypal square lattice, we find no tendencies toward magnetic ordering, as magnetic correlations remain short-range. Nevertheless, the magnetic correlations undergo a remarkable crossover as the system approaches the metal-to-insulator transition. The Mott transition itself does not affect the magnetic correlations. Our equal-time and dynamical structure factors can be used as a reference for inelastic neutron scattering experiments on the growing family of metallic kagome materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

LABORATORY IR STUDIES AND ASTROPHYSICAL IMPLICATIONS OF C{sub 2}H{sub 2}-CONTAINING BINARY ICES

Studies of molecular hot cores and protostellar environments have shown that the observed abundance of gas-phase acetylene (C{sub 2}H{sub 2}) cannot be matched by chemical models without the inclusion of C{sub 2}H{sub 2} molecules subliming from icy grain mantles. Searches for infrared (IR) spectral features of solid-phase acetylene are under way, but few laboratory reference spectra of C{sub 2}H{sub 2} in icy mixtures, which are needed for spectral fits to observational data, have been published. Here, we report a systematic study of the IR spectra of condensed-phase pure acetylene and acetylene in ices dominated by carbon monoxide (CO), carbon dioxide (CO{sub 2}), methane (CH{sub 4}), and water (H{sub 2}O). We present new spectral data for these ices, including band positions and intrinsic band strengths. For each ice mixture and concentration, we also explore the dependence of acetylene's {nu}{sub 5}-band position (743 cm{sup -1}, 13.46 {mu}m) and FWHM on temperature. Our results show that the {nu}{sub 5} feature is much more cleanly resolved in ices dominated by non-polar and low-polarity molecules, specifically CO, CO{sub 2}, and CH{sub 4}, than in mixtures dominated by H{sub 2}O-ice. We compare our laboratory ice spectra with observations of a quiescent region in Serpens.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of vacuum conductance in commercially available (sintered) and additively manufactured porous structures

This report documents the work performed in characterizing the vacuum conductance of porous structures made by conventional sintering (purchased as commercially available products from Mott Corporation ranging from 20 to 100 media grade) and additive manufacturing (powder bed fusion). The additively manufactured structures described in this report were originally intended to be the first iteration of several in an effort to produce desirable conductance characteristics. While resources were not available to link the experimental results to a modeling effort to better understand why certain characteristics were observed, the author hopes that this report may provide a useful set of data for future use, especially as sintered porous structures are not uncommonly procured from Mott corporation for research and development purposes. For that reason, all of the raw data is tabulated in the Appendix: it is possible to reproduce all of the figures shown in this report independently. For a quick order-of magnitude scan of the conductances, refer to Figures 5, 6, 8 and 9.

36 MATERIALS SCIENCE↗