Search NASA⌕ Search

SEARCH · Search NASA

Results for “hardness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Hard, transparent, sp3-containing 2D phase formed from few-layer graphene under compression

Despite several theoretically proposed two-dimensional (2D) diamond structures, experimental efforts to obtain such structures are in initial stage. Recent high-pressure experiments provided significant advancements in the field, however, expected properties of a 2D-like diamond such as sp 3 content, transparency and hardness, have not been observed together in a compressed graphene system. Here, we compress few-layer graphene samples on SiO 2 /Si substrate in water and provide experimental evidence for the formation of a quenchable hard, transparent, sp 3 -containing 2D phase. Our Raman spectroscopy data indicates phase transition and a surprisingly similar critical pressure for two-, five-layer graphene and graphite in the 4e6 GPa range, as evidenced by changes in several Raman features, combined with a lack of evidence of significant pressure gradients or local non-hydrostatic stress components of the pressure medium up to ≈ 8 GPa. The new phase is transparent and hard, as evidenced from indentation marks on the SiO 2 substrate, a material considerably harder than graphene systems. Furthermore, we report the lowest critical pressure (≈ 4 GPa) in graphite, which we attribute to the role of water in facilitating the phase transition. Overall, theoretical calculations and experimental data indicate a novel, surface to- bulk phase transition mechanism that gives hint of diamondene formation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of thermal treatment on energy density and hardness of torrefied wood pellets

Here, three types of wood pellets samples, including two types of commercial pellets and one type of lab-made control pellets were torrefied in a fixed bed unit to study the effect of thermal pretreatment on the quality of wood pellets. The quality of wood pellets was mainly characterized by the pellet density, bulk density, higher heating value, Meyer hardness, saturated moisture uptake, volumetric energy density, and energy yield. Results showed that torrefaction significantly decreased the pellet density, hardness, volumetric energy density, and energy yield. The higher heating value increased and the saturated moisture content decreased after torrefaction. In view of the lower density, lower hardness, lower volumetric energy density, and energy yield of torrefied pellets, it is recommended that biomass should be torrefied and then compressed to make strong pellets of high hydrophobicity and volumetric energy density.

09 BIOMASS FUELS↗

Effect of Nd:YAG laser welding on microstructure and hardness of an Al-Li based alloy

Butt joints of 3.0 mm thick sheets of an Al-Li based alloy have been produced using Nd:YAG laser welding without filler metals. The hardness distribution and microstructure of the alloy and welded joints were investigated. The changes in the grain shapes, grain orientations, microtexture, and precipitates of the fusion zone were analyzed using optical microscope, electron back scattered diffraction (EBSD) and transmission electron microscopy (TEM). The results show that Nd:YAG laser welding leads to a change of the microhardness, grain shape, grain orientations, and a disappearance of the microtexture and precipitates. A narrow band of EQZ along the fusion boundary and a predominantly equiaxed dendritic structure are developed in the fusion zone. The formation of the predominately equiaxed dendritic grains is due to a heterogeneous nucleation mechanism aided by equilibrium A1{sub 3}Zr phases as well as the growth of pre-existing nuclei created by dendrite fragmentation, or by grain detachment resulted from Nd:YAG laser welding processes. In addition, Nd:YAG laser welding produces lower Vickers hardness than that of the base metal due to the decrease in the in quantity of {delta} Prime precipitates in the fusion zone. - Graphical Abstract: The grain shapes, grain orientations, microtexture, and precipitates of the solidified fusion zone were investigated and compared with the base metal using optical microscope, electron back scattered diffraction (EBSD) and transmission electron microscope (TEM). EBSD orientation map of laser welded joint in 5A90 alloys is presented in Fig. 3. It clearly shows that a narrow band EQZ along the fusion boundary and the predominantly equiaxed grains have been developed in the fusion zone of 5A90 alloys. Also, it is clear that the microstructure of the base metal is characterized by laminated grains with preferred orientations, whereas the fusion zone is predominately equiaxed grains in different colors having random orientations. Highlights: Black-Right-Pointing-Pointer The predominantly equiaxed dendritic structure is developed in the fusion zone. Black-Right-Pointing-Pointer The fusion zone with equiaxed grains shows random orientations and microtexture. Black-Right-Pointing-Pointer The loss in hardness in the fusion zone is due to the decrease in {delta} Prime precipitates. Black-Right-Pointing-Pointer The non-epitaxial growth occurs at fusion boundary. Black-Right-Pointing-Pointer The equilibrium A1{sub 3}Zr phases maybe the nuclei of new grains in the fusion zone.

36 MATERIALS SCIENCE↗

Effect of milling time and CNT concentration on hardness of CNT/Al{sub 2024} composites produced by mechanical alloying

Carbon nanotube/2024 aluminum alloy (CNT/Al{sub 2024}) composites were fabricated with a combination of mechanical alloying (MA) and powder metallurgy routes. Composites were microstructurally and mechanically evaluated at sintering condition. A homogeneous dispersion of CNTs in the Al matrix was observed by a field emission scanning electron microscopy. High-resolution transmission electron microscopy confirmed not only the presence of well dispersed CNTs but also needle-like shape aluminum carbide (Al{sub 4}C{sub 3}) crystals in the Al matrix. The formation of Al{sub 4}C{sub 3} was suggested as the interaction between the outer shells of CNTs and the Al matrix during MA process in which crystallization took place after the sintering process. The mechanical behavior of composites was evaluated by Vickers microhardness measurements indicating a significant improvement in hardness as function of the CNT content. This improvement was associated to a homogeneous dispersion of CNTs and the presence of Al{sub 4}C{sub 3} in the aluminum alloy matrix. - Highlights: Black-Right-Pointing-Pointer The 2024 aluminum alloy was reinforced by CNTs by mechanical alloying process. Black-Right-Pointing-Pointer Composites were microstructural and mechanically evaluated after sintering condition. Black-Right-Pointing-Pointer The greater the CNT concentration, the greater the hardness of the composites. Black-Right-Pointing-Pointer Higher hardness in composites is achieved at 20 h of milling. Black-Right-Pointing-Pointer The formation of Al{sub 4}C{sub 3} does not present a direct relationship with the milling time.

36 MATERIALS SCIENCE↗

Meta-equilibrium transition microstructure for maximum austenite stability and minimum hardness in a Ti-stabilized supermartensitic stainless steel

We report that the maximization of stable reverted austenite at room temperature through inter-critical tempering is a widely used method to reduce hardness in supermartensitic stainless steels. Nevertheless, partial martensitic transformation might occur due to insufficient compositional stabilization. In this work, we conducted a time-resolved triple-step inter-critical tempering, specially designed to obtain maximum austenite stability and minimum hardness through the progressive suppression of the martensitic transformation. The mechanism behind the progressive increase in stable reverted austenite was the generation of a meta-equilibrium state, which imposed a limit in both high temperature austenite reversion and room temperature austenite stabilization. Such limit corresponded to the high temperature volume fraction of austenite, obtained right before cooling from the first cycle. Additionally, this effect was associated to the Ni-rich fresh martensite laths acting as local Ni compositional pockets, providing site-specific austenite reversion; and to the suppression of any additional nucleation at the Ni-poor matrix as the T0 temperature for austenite reversion was strongly increased. The softening mechanism was mainly controlled by the carbon arrest effect by the precipitation of Ti (C, N), which was completed after the first tempering cycle. Nevertheless, maximizing reverted austenite and suppressing fresh martensite at room temperature did not result in additional hardness reductions.

36 MATERIALS SCIENCE↗

Wear penalty for steel rubbing against hard coatings in reactive lubricants due to tribochemical interactions

Hard coatings and surface adsorptive/reactive lubricants are two common strategies for improving wear protection, but what if they are used together? In this study, steel-steel and steel-coating sliding was investigated in boundary lubrication of polar and non-polar oils containing a ZDDP or an ionic liquid. Two hard coatings, diamond-like-carbon (DLC) and chromium nitride (CrN), were used. Furthermore, for a steel-steel contact, wear was effectively reduced by using a more surface reactive lubricant, as expected. However, the steel ball wear was increased against a hard coating and further worsened with a more polar oil and/or a more surface reactive additive. The wear mechanism is proposed as a combined effect of physicochemical interactions with the lubricant, mechanical polishing by the counterface, and material adhesion.

36 MATERIALS SCIENCE↗

Bcl-2 expression is essential for development and normal physiological properties of tooth hard tissue and saliva production

Background: Apoptosis plays a fundamental role in appropriate tissue development and function. Although expression of Bcl-2 has been reported during tooth and submandibular gland (SMG) development, the physiological role Bcl-2 plays during these processes has not been addressed. This study was performed to evaluate the impact of Bcl-2 expression on the formation and properties of tooth hard tissue, and saliva production. Methods: Twenty-four mice (12 males and 12 females) were divided into three groups of eight (n=8): group A (Bcl-2 +/+), group B (Bcl-2 +/-), and group C (Bcl-2 -/-) and subjected to micro-CT analyses. The mineral content of first molars was analyzed by X-Ray diffraction (XRD) and scanning electron microscopy (SEM) color dot map. The surface microhardness was determined by Vickers test on labial surfaces of incisors. Saliva was collected from different groups of mice after subcutaneous injection of pilocarpine. Results: Samples from Bcl-2 -/- mice showed significantly smaller micro-CT values, lower and poor crystallinity of hydroxyapatite (HA), and lowest surface micro hardness. SMG from Bcl-2 -/- mice showed remarkable reduction in size, consistent with reduced saliva accumulation. Conclusions: The absence of Bcl-2 expression in SMG did not affect the expression of other Bcl-2 family members. Thus, Bcl-2 expression influence on the formation and properties of tooth hard tissue, and saliva accumulation. Significance: Bcl-2 expression has a significant impact on the mineralogical content of enamel crystals of tooth structure. Lack of Bcl-2 expression led to impaired production of enamel ACP crystals. - Highlights: • Lack of Bcl-2 expression led to impaired production of enamel ACP crystals. • Germline deletion of Bcl-2 reduced the surface microhardness of enamel. • Bcl-2 expression is vitally important for SMG function and saliva production. • Lack of Bcl-2 expression was not compensated by expression of other Bcl-2 family members.

60 APPLIED LIFE SCIENCES↗

Achieving High-Resolution Hard X-ray Microscopy using Monolithic 2D Multilayer Laue Lenses

This article introduces the 2D multilayer Laue lens (MLL) nanofocusing optics recently developed for high-resolution hard X-ray microscopy. The new optics utilized a micro-electro-mechanical-system (MEMS)-based template to accommodate two linear MLL optics in a pre-aligned configuration. Angular misalignment between the two lenses was controlled in tens of millidegrees, and the lateral position error was on a micrometer scale. Using the developed 2D MLLs, an astigmatism-free point focus of approximately 14 nm by 13 nm in horizontal and vertical directions, respectively, at 13.6 keV photon energy was obtained. In conclusion, the success of 2D MLL optics with an approaching 10 nm resolution is a significant step forward for the development of high-resolution hard X-ray microscopy and applications of MLL optics in the hard X-ray community.

36 MATERIALS SCIENCE↗

Observing Framework Expansion of Ordered Mesoporous Hard Carbon Anodes with Ionic Liquid Electrolytes via in Situ Small-Angle Neutron Scattering

Here, the reversible capacity of materials for energy storage, such as battery electrodes, is deeply connected with their microstructure and any major changes in the microstructure that occur during cycling can cause a dramatic loss in capacity. Here, we address the fundamental mechanism by which hard mesoporous carbons, which exhibit high capacities versus Li, achieve stable cycling during the initial “break-in” cycles. Using in-situ small angle neutron scattering we show that hard carbon anodes that exhibit reversible Li + cycling typically expand in volume up to 5% during the first discharge cycle, with only relatively minor expansion and contraction in subsequent cycles after a suitable solid electrolyte interphase (SEI) has formed. Reversible carbon framework expansion is observed in the electrolyte lithium bis(trifluoro-methanesulfonyl)imide (LiTFSI)/1-ethyl-3-methyl-imidazolium bis(trifluoromethanesulf-onyl)imide (EMIM.TFSI) related to EMIM + intercalation before a stable SEI is formed. However, intercalation by 1-methyl-1-propypyrrolidinium bis-(trifluoromethanesulfonyl)imide (MPPY.TFSI) and lithium result in irreversible framework expansion. Irreversible framework ex-pansion in conjunction with SEI formation is found to be essential for the stable cycling of hard carbon electrodes.

25 ENERGY STORAGE↗

Transient Microstructure of Low Hard Segment Thermoplastic Polyurethane under Uniaxial Deformation

Microstructure evolution of a low hard segment (<10 mol %) thermoplastic polyurethane (LHS-TPU) has been followed by in-situ wide-angle X-ray (WAX) and small-angle X-ray scattering (SAX) with a focus on elucidating peculiar microstructural changes during uniaxial deformation ({gamma} = 1-3.5). For the LHS-TPU, the hard segments, due to their low content and chemical structure, do not crystallize but form glassy regions that act as physical cross-links. Two types of soft segment crystallites are resolved upon elongation via DSC, SAX, and WAX experiments. Phase I consists of a small amount of initial crystallites (<2%) that function similar to conventional PU hard segment domains, deforming at small uniaxial strains ({gamma} = 1-2) to a chevron-type morphology, which exhibit equatorial 4-point patterns in SAX. Phase II evolves at higher deformations ({gamma} > 2) due to strain-induced crystallization. Phase II exhibits a conventional meridional 2-point pattern along the deformation direction with lamellar crystallites aligning in the plane normal to the deformation. WAX, SAX, and DSC confirm that both phases coexist over a small strain window ({gamma} = 1.9-2.5), demonstrating the independent nature of the two crystalline phases. These findings indicate that the LHS-TPU in this study is similar to poly(butylene adipate) (PBA) in its morphological and structural behavior. This is further substantiated by NMR, which reveals that the LHS-TPU consists of 90% soft segments, which are identified as PBA via crystal structure analysis of a highly aligned fiber. The soft segments in the LHS-TPU dominate the morphology and the X-ray patterns upon deformation.

36 MATERIALS SCIENCE↗

High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re 2 (N 2 )(N) 2 stable at ambient conditions

High-pressure synthesis in diamond anvil cells can yield unique compounds with advanced properties, but often they are either unrecoverable at ambient conditions or produced in quantity insufficient for properties characterization. Here we report the synthesis of metallic, ultraincompressible ( K 0 = 28(10) GPa), and very hard (nanoindentation hardness 36.7(8) GPa) rhenium nitride pernitride Re 2 (N 2 )(N) 2 . Unlike known transition metals pernitrides Re 2 (N 2 )(N) 2 contains both pernitride N 2 4– and discrete N 3– anions, which explains its exceptional properties. Re 2 (N 2 )(N) 2 can be obtained via a reaction between rhenium and nitrogen in a diamond anvil cell at pressures from 40 to 90 GPa and is recoverable at ambient conditions. We develop a route to scale up its synthesis through a reaction between rhenium and ammonium azide, NH 4 N 3 , in a large-volume press at 33 GPa. Although metallic bonding is typically seen incompatible with intrinsic hardness, Re 2 (N 2 )(N) 2 turned to be at a threshold for superhard materials.

36 MATERIALS SCIENCE↗

Revealing the closed pore formation of waste wood-derived hard carbon for advanced sodium-ion battery

Abstract Although the closed pore structure plays a key role in contributing low-voltage plateau capacity of hard carbon anode for sodium-ion batteries, the formation mechanism of closed pores is still under debate. Here, we employ waste wood-derived hard carbon as a template to systematically establish the formation mechanisms of closed pores and their effect on sodium storage performance. We find that the high crystallinity cellulose in nature wood decomposes to long-range carbon layers as the wall of closed pore, and the amorphous component can hinder the graphitization of carbon layer and induce the crispation of long-range carbon layers. The optimized sample demonstrates a high reversible capacity of 430 mAh g −1 at 20 mA g −1 (plateau capacity of 293 mAh g −1 for the second cycle), as well as good rate and stable cycling performances (85.4% after 400 cycles at 500 mA g −1 ). Deep insights into the closed pore formation will greatly forward the rational design of hard carbon anode with high capacity.

25 ENERGY STORAGE↗

Self-consistent hardness measurements spanning eleven decades of strain rate on a single material surface

A comprehensive understanding of material strength across strain rates typically requires the combination of results from different methods, which often vary in loading conditions and/or sampled volumes, leading to discrepancies in material behavior. This study presents a microindentation approach to measure hardness covering eleven orders of magnitude in strain rate, from quasi-static to phonon drag-dominated rates, on a single material surface under uniform testing conditions. By engineering the geometry of impactors used in laser induced particle impact testing, we extend the breadth of accessible strain rates, including multiple distinct rates exceeding 10⁵ s⁻¹. This self-consistent approach provides clearer insights into high-rate deformation mechanisms. Our results demonstrate a gradual increase in hardness with strain rate from quasi-static up to ultra-high rates, where a sharp upturn in hardness is observed.

Engineering↗

Locating the atoms at the hard-soft interface of gold nanoparticles

Surface structure affects the growth, shape and properties of nanoparticles. In wet chemical syntheses, metal additives and surfactants are used to modify surfaces and guide nanocrystal growth. To understand this process, it is critical to understand how the surface structure, and hence its energy, is modified. However, measuring the type and arrangement of atoms at hard-soft interfaces on nanoscale surfaces, especially in the presence of surfactants, is extremely challenging. Here, we determine the atomic structure of the hard-soft interface in a metallic nanoparticle by developing low-dose imaging conditions in four-dimensional scanning transmission electron microscopy that are preferentially sensitive to surface adatoms. By revealing experimentally the copper additives and bromide surfactant counterion at the surface of a gold nanocuboid and quantifying their interatomic distances, our direct, low-dose imaging method provides atomic-level understanding of chemically sophisticated nanomaterial surface structures. These measurements of the atomic structure of the hard-soft interface provide the information necessary to understand and quantify surface chemistries and energies and their pivotal role in nanocrystal growth.

Li, Weilun [Monash University, Melbourne, VIC (Aus↗

A MHz-repetition-rate hard X-ray free-electron laser driven by a superconducting linear accelerator

The European XFEL is a hard X-ray free-electron laser (FEL) based on a high-electron-energy superconducting linear accelerator. The superconducting technology allows for the acceleration of many electron bunches within one radio-frequency pulse of the accelerating voltage and, in turn, for the generation of a large number of hard X-ray pulses. In this paper, we report on the performance of the European XFEL accelerator with up to 5,000 electron bunches per second and demonstrating a full energy of 17.5 GeV. Feedback mechanisms enable stabilization of the electron beam delivery at the FEL undulator in space and time. The measured FEL gain curve at 9.3 keV is in good agreement with predictions for saturated FEL radiation. Hard X-ray lasing was achieved between 7 keV and 14 keV with pulse energies of up to 2.0 mJ. Using the high repetition rate, an FEL beam with 6 W average power was created.

43 PARTICLE ACCELERATORS↗

All hard X-ray transient grating spectroscopy

Optical-domain transient grating (TG) spectroscopy is the ideal tool to investigate transport phenomena in gases, liquids and solids, but it is limited to typically micron-size grating periods. Extreme-Ultraviolet TG has represented a major leap forward to access the mesoscopic scales. Hard X-ray TGs open access in principle to the nanoscale. Hard X-ray TGs were recently generated using the Talbot effect and probed by optical pulses, but these hinder exploiting the advantages of the nanoscale gratings. Here, we present an all-X-ray TG study, in which few-femtosecond hard X-ray pulses are used both for excitation and probing. Our experiment was performed on an amorphous film of an FeGd alloy and on a thin silicon single crystal. The results show a manifestation of the TG induced by the X-ray pump and probe pulses in the form of Talbot carpets, as well as temporal evolution of the grating in crystalline silicon showing coherent optical phonons. Ultrafast all-X-ray TG spectroscopy has the potential to study fundamental excitations with femtosecond time resolution and nanometer spatial sensitivity.

Ferrari, Eugenio [Deutsches Elektronen-Synchrotron↗

Hard Photodisintegration of Proton Pairs in {sup 3}He

Hard deuteron photodisintegration has been investigated for 20 years, as its cross section follows the constituent counting rule and it provides insight into the interplay between hadronic and quark-gluon degrees of freedom in high-momentum transfer exclusive reactions. We have now measured for the first time hard pp-pair disintegration in the reaction {gamma}{sup 3}He{yields}pp+n, using kinematics corresponding to a spectator neutron. Cross sections were measured for 90 deg. c.m. at 8 beam energies, from 0.8 to 4.7 GeV. Preliminary results will be presented and compared to the hard deuteron photodisintegration data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Compact Collision Kernels for Hard Sphere and Coulomb Cross Sections; Fokker-Planck Coefficients

A compact collision kernel is derived for both hard sphere and Coulomb cross sections. The difference between hard sphere interaction and Coulomb interaction is characterized by a parameter {eta}. With this compact collision kernel, the calculation of Fokker-Planck coefficients can be done for both the Coulomb and hard sphere interactions. The results for arbitrary order Fokker-Planck coefficients are greatly simplified. An alternate form for the Coulomb logarithm is derived with concern to the temperature relaxation in a binary plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗