Search NASA⌕ Search

SEARCH · Search NASA

Results for “GARNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Solid-state synthesis of YAG powders through microwave coupling of oxide/carbon particulate mixtures

The rapid synthesis of yttrium aluminum garnet (Y 3 Al 15 O 12 , YAG) powder was investigated through the use of microwave irradiation of the oxide precursor system. For this investigation, an external hybrid heating source was not used. Instead, the rapid heating of the precursor materials (yttria and alumina powders, which are typically transparent to 2.45 GHz microwaves) was initiated by mixing an intrinsic absorbing material (carbon) into the original oxide precursors. The effect of the carbon characteristics, such as carbon source, concentration, particle size, and agglomerate microstructure were evaluated on the efficiency of coupling and resultant oxide reaction. The microwave power was varied to optimize the YAG conversion and eliminate intermediate phase formation. Interactions between the conductive carbon particles and the dielectric oxides within the microwave exposure produced local arching and micro-plasma formation within the powder bed, resulting in the rapid formation of the refractory YAG composition. This optimal conduction led to temperatures of 1000°C that could be achieved in less than 5 min resulting in the formation of > 90 vol% YAG. The understanding of a conductor/dielectric particulate system here, provided insight into possible application of similar systems where microwave irradiation could be used for enhanced solid-state formation, local melting events, and gas phase reactions with a composite powder media.

36 MATERIALS SCIENCE↗

Spin waves in YIG based magnonic networks: Design and technological aspects

Microwaveguides for spin waves based on yttrium iron garnet films and cross-like structures built on such waveguides are experimentally studied. Additionally, effects of the waveguides geometry, location of the microantennas for excitation and detection of the spin waves, and geometry of the waveguides junctions on the spin wave excitation and propagation efficiency are discussed.

36 MATERIALS SCIENCE↗

Structure and magnetic properties of new Be-substituted langasites A{sub 3}Ga{sub 3}Ge{sub 2}BeO{sub 14} (A=Pr, Nd, and Sm)

Langasites have been studied extensively in past for their functional properties and use in telecommunication. A thorough understanding of their ground state is limited by the difficulty in synthesizing new members belonging to this series due to the formation of competing phases such as the garnets. Three magnetic langasites A{sub 3}Ga{sub 3}Ge{sub 2}BeO{sub 14} (A=Pr, Nd, and Sm) and a non-magnetic lattice standard La{sub 3}Ga{sub 3}Ge{sub 2}BeO{sub 14} were synthesized using the ceramic method. These were further characterized by X-ray diffraction, magnetization, magnetic susceptibility and heat capacity measurements. All three langasites exhibit net antiferromagnetic interactions at low temperatures and no evidence of long range magnetic ordering was observed down to 0.350 K. - Graphical abstract: Kagome network formed by the magnetic ions in the new Be-langasites. The ground states of three new members were explored using different physical property measurements such as X-ray diffraction, magnetization, magnetic susceptibility and heat capacity (a–d show refinement patterns for the langasites). These can be added to the list of candidate spin liquid materials. - Highlights: • Four new langasites A{sub 3}Ga{sub 3}Ge{sub 2}BeO{sub 14} (A=La, Pr, Nd, and Sm) were synthesized. • These were characterized using physical and magnetic property measurements. • These langasites exhibit net antiferromagnetic interactions at low temperatures. • No evidence of long range magnetic ordering was observed down to 0.350 K. • Can be potential Spin liquid candidates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure characterization via stereological relations — A shortcut for beginners

Stereological relations that can be routinely applied for the quantitative characterization of microstructures of heterogeneous single- and two-phase materials via global microstructural descriptors are reviewed. It is shown that in the case of dense, single-phase polycrystalline materials (e.g., transparent yttrium aluminum garnet ceramics) two quantities have to be determined, the interface density (or, equivalently, the mean chord length of the grains) and the mean curvature integral density (or, equivalently, the Jeffries grain size), while for two-phase materials (e.g., highly porous, cellular alumina ceramics), one additional quantity, the volume fraction (porosity), is required. The Delesse–Rosiwal law is recalled and size measures are discussed. It is shown that the Jeffries grain size is based on the triple junction line length density, while the mean chord length of grains is based on the interface density (grain boundary area density). In contrast to widespread belief, however, these two size measures are not alternative, but independent (and thus complementary), measures of grain size. Concomitant with this fact, a clear distinction between linear and planar grain size numbers is proposed. Finally, based on our concept of phase-specific quantities, it is shown that under certain conditions it is possible to define a Jeffries size also for two-phase materials and that the ratio of the mean chord length and the Jeffries size has to be considered as an invariant number for a certain type of microstructure, i.e., a characteristic value that is independent of the absolute size of the microstructural features (e.g., grains, inclusions or pores). - Highlights: • Stereology-based image analysis is reviewed, including error considerations. • Recipes are provided for measuring global metric microstructural descriptors. • Size measures are based on interface density and mean curvature integral density. • Phase-specific quantities and a generalized Jeffries size are introduced. • Linear and planar grain size numbers are clearly distinguished and explained.

36 MATERIALS SCIENCE↗

The synthesis and optical property of solid-state-prepared YAG:Ce phosphor by a spray-drying method

Ce{sup 3+}-activated yttrium aluminum garnet (Y{sub 3}Al{sub 5}O{sub 12}:Ce, YAG:Ce) powder as luminescent phosphor was synthesized by the solid-state reaction method. The phase identification, microstructure and photoluminescent properties of the products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), absorption spectrum and photoluminescence (PL) analysis. Spherical phosphor particle is considered better than irregular-shaped particle to improve PL property and application, so this phosphor was granulated into a sphere-like shape by a spray-drying device. After calcinating at 1500 deg. C for 0, 4, and 8 h, the product was identified as YAG and CeO{sub 2} phases. The CeO{sub 2} phase content is decreased by increasing the calcination time or decreasing the Ce{sup 3+} doping content. The product showed higher emission intensity resulted from more Ce{sup 3+} content and larger grain size. The product with CeO{sub 2} was found to have lower emission intensity. This paper presents the crystal structures of Rietveld refinement results of powder XRD data.

36 MATERIALS SCIENCE↗

Crystallization kinetics and densification of YAG nanoparticles from various chelating agents

Yttrium aluminium garnet (YAG, Y{sub 3}Al{sub 5}O{sub 12}) nanoparticles were prepared using sonochemical sol-gel method with three different chelating agents and the effect of crystallization kinetics was investigated with differential scanning calorimetry-thermogravimetry (DSC-TG). The activation energy values of crystallization for the as-synthesized YAG nanoparticles using citric acid (CA), glycine (G) or a mixture of citric acid-glycine (CA-G), as chelating agents were found to be 160.5, 142.2 and 140.4 kJ mol{sup -1} and the corresponding Avarami constants were 2.2, 2.1 and 1.9, respectively. Samples produced with the mixed chelating agent under sonification, could be crystallized to single phase YAG nanoparticles (10-65 nm) after annealing at 1100 deg. C. Pellets made from the annealed YAG particles could be sintered to a relative density greater than 99% at 1500 deg. C with a grain size of 4.5 {mu}m, made up of secondary particles formed from primary nano-crystals within the grains. Grain size and relative density increased with different chelating agents from CA to G and CA-G in the increasing order when YAG samples were sintered. Grain growth and densification occurred at a relatively low temperature of 1500 deg. C as compared to over 1800 deg. C in solid-state reactions.

36 MATERIALS SCIENCE↗

Modification of Bi:YIG film properties by substrate surface ion pre-treatment

Highlights: • Effects of substrates ion beam treatment on magnetoptical properties Bi:YIG films. • Substrate surface damage results in sign inversion of the magneto-optical effects. • Atomically smooth films growth takes place on low energy ions treated substrates. • High energy ions treatment results in selective nucleation mechanism of the growth. - Abstract: The effect of a controlled ion beam pre-treatment of (1 1 1)-oriented Gd{sub 3}Ga{sub 5}O{sub 12} substrates on the magneto-optical properties and surface morphology of the ultrathin bismuth-substituted yttrium–iron garnet films with a composition Bi{sub 2.8}Y{sub 0.2}Fe{sub 5}O{sub 12} was studied. It has been shown that the observed sign inversion of magneto-optical effects (Faraday rotation and magnetic circular dichroism) observed in films that were deposited on the GGG substrate pre-treated by 1 keV and 4 keV Ar{sup +} ion beams is a result of the substrate surface amorphization caused by the ion bombardment.

36 MATERIALS SCIENCE↗

Luminescence properties of Eu2+-activated NaCaBeSi2O6F for white light-emitting diode applications

Highlights: • A novel blue-emitting garnet NaCaBeSi{sub 2}O{sub 6}F:Eu{sup 2+} phosphor was synthesized. • The broad NUV excitation band (300–400 nm) gives blue emission. • The LED made with NaCaBeSi{sub 2}O{sub 6}F:Eu{sup 2+} and green and red-emitting phosphors gives white-light emission. - Abstract: A series of blue-emitting NaCaBeSi{sub 2}O{sub 6}F:Eu{sup 2+} phosphors were obtained via a solid state reaction. NaCaBeSi{sub 2}O{sub 6}F:Eu{sup 2+} exhibit a broad absorption from 250 to 450 nm when monitored at 467 nm and display a broad emission band from 400 to 600 nm when excited at 397 nm. The concentration quenching was obtained when the concentration of Eu{sup 2+} was increased to 0.8 mol%. Energy transfer interactions between Eu{sup 2+} in host is due to dipole-dipole mechanisms and the critical distance was calculated to be 31.96 Å. The results obtained in this study highly indicates that NaCaBeSi{sub 2}O{sub 6}F:Eu{sup 2+} can be a potential blue-emitting phosphor for light quality improvement in white-LED applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A superior composite gel polymer electrolyte of Li7La3Zr2O12- poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for rechargeable solid-state lithium ion batteries

Highlights: • Solid electrolyte LLZO dispersed in PVDF-HFP matrix is studied. • Garnet inorganic fillers enhance the transport number of Li{sup +}. • Composite polymer electrolytes show superior electrochemical performance. • Coin cells (Li/PVDF-HFP: LLZO/LiFePO{sub 4}) show good cycling performance. - Abstract: High-quality solid electrolyte is essential for the growing need of lithium ion batteries. Herein, we report a novel organic-inorganic composite electrolyte based on Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} ceramic powder incorporated into PVDF-HFP through a simple combined method. At room temperature, the composite polymer electrolyte (CPE) possesses a good ionic transmission improvement of 3.71 × 10{sup −4} S cm{sup −1}. The CPE behaves a fine lithium ion transference number of 0.58 and an electrochemical window of up to 4.65 V. CPEs display meliorative electrochemical stability compared to pure PVDF-HFP electrolyte. The cathode presents an excellent initial discharge capacity of 163.1 mAh g{sup −1} at 0.2 C in Li/CPE/LiFePO{sub 4} cell. The cell with CPE displays much better capacity retention than that with pure PVDF-HFP electrolyte. The Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} modified PVDF-HFP is a promising electrolyte for lithium ion batteries.

36 MATERIALS SCIENCE↗

Molten Lithium-Brass/Zinc Chloride System as High-Performance and Low-Cost Battery

Batteries with high safety, low cost, and reasonable energy density are essential for grid-scale energy storage and still remain elusive. In this paper, we report a solid electrolyte-based liquid lithium-brass/zinc chloride (SELL-brass/ZnCl 2 ) battery using garnet-type lithium-ion solid electrolyte, lithium anode, and brass/ZnCl 2 cathode. The chemistry of the cell reaction and the ability of being assembled in discharged state ensures a high safety. The use of low-cost ZnCl 2 cathode can realize a low cell material cost of $16 kWh –1 . The adoption of lithium anode guarantees a high theoretical energy density of 750 Wh kg –1 and 2,250 Wh L –1 . Moreover, by using brass powder as a Zn source in the cathode, the Zn particle growth issue is successfully solved, and a good cycling stability of the battery can be obtained. As full cell performance and scalability are also verified, our SELL-brass/ZnCl 2 battery shows a high potential for practical use in grid energy storage.

25 ENERGY STORAGE↗

Insulating nanomagnets driven by spin torque

Magnetic insulators, such as yttrium iron garnet (Y 3 Fe 5 O 12 ), are ideal materials for ultra-low power spintronics applications due to their low energy dissipation and efficient spin current generation and transmission. Recently, it has been realized that spin dynamics can be driven very effectively in micrometer-sized Y 3 Fe 5 O 12 /Pt heterostructures by spin-Hall effects. We demonstrate here the excitation and detection of spin dynamics in Y 3 Fe 5 O 12 /Pt nanowires by spin-torque ferromagnetic resonance. The nanowires defined via electron-beam lithography are fabricated by conventional room temperature sputtering deposition on Gd 3 Ga 5 O 12 substrates and lift-off. We observe field-like and anti-damping-like torques acting on the magnetization precession, which are due to simultaneous excitation by Oersted fields and spin-Hall torques. The Y 3 Fe 5 O 12 /Pt nanowires are thoroughly examined over a wide frequency and power range. We observe a large change in the resonance field at high microwave powers, which is attributed to a decreasing effective magnetization due to microwave absorption. By comparing different nanowire widths, the importance of geometrical confinements for magnetization dynamics becomes evident. In conclusion, our results are the first stepping stones toward the realization of integrated magnonic logic devices based on insulators, where nanomagnets play an essential role.

36 MATERIALS SCIENCE↗

Effect of Liquid Electrolyte Soaking on the Interfacial Resistance of Li 7 La 3 Zr 2 O 1 2 for All-Solid-State Lithium Batteries

In this work, the impact of liquid electrolyte soaking on the interfacial resistance between the garnet-structured Li 7 La 3 Zr 2 O 12 (LLZO) solid electrolyte and metallic lithium has been studied. Lithium carbonate (Li 2 CO 3 ) formed by inadvertent exposure of LLZO to ambient conditions is generally known to increase interfacial impedance and decrease lithium wettability. Soaking LLZO powders and pellets in the electrolyte containing lithium tetrafluoroborate (LiBF 4 ) shows a significantly reduced interfacial resistance and improved contact between lithium and LLZO. Raman spectroscopy, X-ray diffraction, and soft X-ray absorption spectroscopy reveal how Li 2 CO 3 is continuously removed with increasing soaking time. On-line mass spectrometry and free energy calculations show how LiBF 4 reacts with surface carbonate to form carbon dioxide. Using a very simple and scalable process that does not involve heat-treatment and expensive coating techniques, we show that the Li–LLZO interfacial resistance can be reduced by an order of magnitude.

25 ENERGY STORAGE↗

Structural and Computational Assessment of the Influence of Wet-Chemical Post-Processing of the Al-Substituted Cubic Li 7 La 3 Zr 2 O 12

Li 7 La 3 Zr 2 O 12 (LLZO) and related compounds are considered as promising candidates for future all-solid-state Li-ion battery applications. Still, the processing of those materials into thin membranes with the right stoichiometry and crystal structure is difficult and laborious. The sensitivity of the Li-ion conductive garnets against moisture and the associated Li + /H + cation exchange makes their processing even more difficult. Formulation of suitable polymer/ceramic hybrid solid state electrolytes could be a prosperous way to reach the future large scale production of solid state Li-ion batteries. In fact, solvent mediated and/or slurry based wet-processing of the LLZO, e.g., tape-casting, could result in irreversible Li-ion loss of the pristine material due to Li + /H + cation exchange. The concomitant structural changes and loss in functionality in terms of Li-ion conductivity are the results of the above process. As such, in the present work a systematic study on the chemical stability and structural retention of Al-substituted LLZO in different solvents is reported. It was found that Li + /H + exchange in LLZO occurs upon solvent immersion, and its magnitude is dependent on the availability of –OH functional groups of the solvent molecules. As a result, a larger degree of Li + /H + exchange causes higher increase of the lattice parameter of the LLZO, determined by synchrotron diffraction analyses. The expansion of the cubic unit cell was ascertained, when Li + was replaced by H + in the host lattice, by ab initio computational studies. The application of the most common solvent as dispersion medium, i.e., high purity water, causes the most significant Li + /H + exchange and, therefore, structural change, while acetonitrile was proven to be the best suitable solvent for wet postprocessing of LLZO. Finally, computational calculations suggested that the Li + /H + exchange could result in diminished ionic, i.e., mixed Li + –H + , conductivity due to the insertion of protons with lower mobility than that of Li-ions.

36 MATERIALS SCIENCE↗

ITER LIDAR performance analysis

The core LIDAR Thomson scattering for ITER is specified for core profile measurements with a spatial resolution of 7 cm (a/30) for the range of 500 eV<T{sub e}<40 keV and n{sub e}>3x10{sup 19} m{sup -3} at an accuracy of <10% for T{sub e}. These specifications are verified using a full profile Monte Carlo simulation code. In the simulations it is assumed that the input transmission is 50% and the collection transmission is 10% for {lambda}=300-1200 nm and F/=6-17. A crucial design decision lies on the choice of laser and detector combination. It is evaluated that the system can meet its spatial and accuracy specifications for higher temperatures of T{sub e}>5 keV with a combination of a neodymium-doped yttrium aluminum garnet (Nd:YAG) laser ({lambda}{sub 0}=1064 nm, {delta}{lambda}<1 nm, 5 J, and {delta}t{sub FWHM}=250 ps, 5-10 Hz) and S20, GaAs, and GaAsP microchannel plate photomultipliers ({delta}t{sub FWHM}<300 ps, effective quantum efficiency, EQE=3%-4%, and D=18 mm). In order to reach the required T{sub e} of 500 eV with Nd:YAG first harmonic, this choice requires a development of fast near infrared detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spectroscopic characterization of laser ablation brass plasma

We present optical emission studies of the laser ablation brass plasma generated by the fundamental, second, and third harmonics of a neodymium doped yttrium aluminum garnet laser. The spectra predominantly reveal the spectral lines of the neutral and singly ionized copper and zinc. The excitation temperatures are determined by the Boltzmann plot method, whereas the electron number densities have been extracted from the Stark broadened line profiles. The spatial variations in the spectral line intensities and the plasma parameters at 1000, 500, and 100 mbar air pressures have been evaluated. Besides, the effect of the ambient gases (He, Ne, and Ar), the laser irradiance, and the laser wavelengths on the plasma parameters have been investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A scanning Hall probe microscope for high resolution magnetic imaging down to 300 mK

We present the design, construction, and performance of a low-temperature scanning Hall probe microscope with submicron lateral resolution and a large scanning range. The detachable microscope head is mounted on the cold flange of a commercial {sup 3}He-refrigerator (Oxford Instruments, Heliox VT-50) and operates between room temperature and 300 mK. It is fitted with a three-axis slip-stick nanopositioner that enables precise in situ adjustment of the probe location within a 6x6x7 mm{sup 3} space. The local magnetic induction at the sample surface is mapped with an easily changeable microfabricated Hall probe [typically GsAs/AlGaAs or AlGaAs/InGaAs/GaAs Hall sensors with integrated scanning tunnel microscopy (STM) tunneling tips] and can achieve minimum detectable fields {>=}10 mG/Hz{sup 1/2}. The Hall probe is brought into very close proximity to the sample surface by sensing and controlling tunnel currents at the integrated STM tip. The instrument is capable of simultaneous tunneling and Hall signal acquisition in surface-tracking mode. We illustrate the potential of the system with images of superconducting vortices at the surface of a Nb thin film down to 372 mK, and also of labyrinth magnetic-domain patterns of an yttrium iron garnet film captured at room temperature.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Doppler frequency up conversion of electromagnetic waves in a slotline on an optically excited silicon substrate

The Doppler frequency up conversion of microwaves in a slotline on an optically excited silicon substrate was experimentally observed. An array of 24 optical fibers with different lengths was used to effectively tilt the wave front of a 532 nm neodymium-doped yttrium aluminum garnet laser beam with a pulse duration of 33 ps. The tilted laser beam produced electron-hole surface plasma whose boundary moved at a relativistic velocity of about c/3.4 (c is the speed of light) along the slotline. The experiments showed that microwaves reflected at the moving boundary of the plasma in the slotline are converted to millimeter waves with a frequency up conversion ratio of 3.82.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evolution and imaging of nanoparticles observed in laser ablated carbon plume

We report evidence of nanoparticles formation in laser ablated carbon plasma created by irradiating a graphite target with nanosecond neodymium doped yttrium aluminum garnet laser. The temporal evolution and spatial distribution of C{sub 2} molecules in the plasma is studied using optical emission spectroscopy, dynamic imaging and laser induced fluorescence techniques. The laser induced fluorescence spectrum and imaging of C{sub 2} fluorescence corresponding to transition d {sup 3}PI{sub g}-a {sup 3}PI{sub u} (0, 1) (lambda=563.5 nm) is investigated by probing the expanding plume using a dye laser. The temporal evolution of ground state number density of C{sub 2} shows density varying from 2.6x10{sup 20}/m{sup 3} to 1.2x10{sup 22}/m{sup 3} on varying delay between the ablating and probe pulse from 200 to 600 ns. A peculiar bifurcation of carbon plume into two parts at approx270 ns after the formation of plasma is attributed to recombination of carbon species and formation of nanoparticles. This study may help in quantitatively understanding of formation of carbon molecular species and the nanoparticles produced in laser ablated carbon plume.

77 NANOSCIENCE AND NANOTECHNOLOGY↗