Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogen Diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Observation of impurity accumulation and its compatibility with high plasma performance in W7-X

At the W7-X stellarator, the bolometer system has measured an intensive radiation zone in the inner plasma region (at a normalized radius $ρ$ ~ 0.3–0.4) in the hydrogen plasma generated by electron cyclotron resonance heating; it differs from the normal plasma radiation distribution with an edge-localized emission zone. Spectroscopic diagnostics have recorded high-Z elements such as iron. This phenomenon happens in the plasma phases after gas supply turn-off, which results in all impurity relevant diagnostic signals increasing for several seconds. Despite the enhancement of the core radiation, the plasma energy confinement is improved. A transport analysis shows that this impurity radiation behavior is associated with a low diffusion coefficient ($D$~ 0.02 m 2 s -1 ) and a reversal of the convection around the radial position of the emission peak, which, under normal conditions, separates the zones of outward convection in the central (|$V$| ~ 0.1 m s -1 ) and inward convection in the outer region (|$V$| ~ 0.3 m s -1 ). An impurity accumulation around this radial position has been identified. The transport coefficients obtained are comparable with the theoretical predictions of collisional impurity transport. In the plasma phases studied, both impurity and energy confinement are enhanced. The mechanism responsible for the improvement is believed to be a reduction of micro-instabilities associated with the observed steepening of the density profile, initiated by a low edge plasma density (<1.0 × 10 19 m -3 ) after switching off the gas fueling. The normalized temperature and density gradients fulfil the condition for the suppression of ITG turbulence.

suppression of ITG turbulence↗
DOE OSTI2022

Semi Transparent Three-Dimensional Macroporous Quaternary Oxynitride Photoanodes for Photoelectrochemical Water Oxidation

Semi transparent three-dimensional macroporous (3DM) photoanodes based on quaternary oxynitrides have the potential to simultaneously realize superior light harvesting and efficient charge transfer in a tandem photoelectrochemical (PEC) cell. A 3DM CaTaO 2 N photoanode was prepared for the first time on a GaN/Al 2 O 3 substrate via a chemical route, and it exhibits a high transmittance of >60% in the wide solar spectrum and a photoresponse onset at −0.3 V versus the reversible hydrogen electrode (V RHE ) under simulated solar illumination. In particular, a plateau photocurrent density of 0.21 mA cm –2 was achieved at a low potential of 0.4 V RHE , which was 1.6-fold and more than 50-fold higher than a two-dimensional macroporous (2DM) CaTaO 2 N/GaN/Al 2 O 3 photoanode and a conventional particle-based CaTaO 2 N/GaN/Al 2 O 3 photoanode, respectively. The bicontinuous, interconnected pore structure within this 3DM film can improve charge carrier separation and collection by reducing the average diffusion distance for minority carriers toward the electrolyte. Optical measurements and simulations verified the enhanced sunlight harvesting in the 3DM photoanode, which was ascribed to the concentrated distribution of the electric field and multiple scattering. Furthermore, this study provides guidance for future synthesis of highly efficient semitransparent 3DM quaternary oxynitride-based photoanodes for a tandem PEC device.

Layers↗
DOE OSTI2023

Gas nitriding behavior of refractory metals and implications for multi-principal element alloy design

Multi-principal element alloys (MPEAs) comprise a large, flexible compositional space that enables tuning of their chemistry, structure, and properties. Here, to facilitate the development of nitriding-based surface-enhancement strategies that harness a broad compositional space, this study examined the gas nitriding behavior of Hf, Mo, Nb, Ta, Ti, and Zr as a function of time, temperature (750 and 1000 °C), and nitriding potential (i.e. ammonia-to-hydrogen ratio). These metals were selected because they have a strong driving force to form nitrides, and appear in many promising refractory MPEA compositions. The nitriding temperatures were selected based on the phase transformation temperature of Ti and Zr, and the nitriding potentials were chosen such that all elements are expected to form nitrides. Mass gain measurements indicate that all six elements follow parabolic kinetics. The microstructure observations and quantitative microchemical analysis show formation of dense and well-adhered compound layers for Mo, Nb, and Ta. Thick diffusion zones appear in Hf, Ta, Ti, and Zr, and diffusion coefficients were fit to the composition profiles. Partial delamination of the compound layer occurred for Ti and Zr. Peak hardness values above 30 GPa are obtained in the dense compound layers, and the solute hardening of the underlying alloy is correlated with the nitrogen content. The results provide insight into the dynamics of nitride compound formation relative to interstitial dissolution of nitrogen, and are discussed in the context of MPEA composition and processing design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Deactivation of Cu/ZSM-5 Catalysts during the Conversion of 2,3-Butanediol to Butenes

This work determines the deactivation mechanisms of Cu/ZSM-5 catalysts used for the conversion of 2,3-butanediol to butene as part of an alcohol-to-jet route. The deactivation of the catalyst, reflected by a drop in the rate of the limiting hydrogenation step by over 90% in 24 h at a weight hourly space velocity of 5.92 h−1, proceeds via both the agglomeration of copper particles and the obstruction of copper surfaces due to carbonaceous deposits, although the former has less impact on the decrease in the hydrogenation rate. To reduce the detrimental effect of carbonaceous deposits on catalytic activity, ZMS-5 is modified through desilication of the HZSM-5 support with NaOH and CsOH solutions to generate a hierarchical structure with mesopores. The catalyst with the CsOH-treated support generates the highest overall yield of desired olefin products and experiences the slowest deactivation. This is a result of the lower Brønsted acidity and larger mesopores found in the CsOH-treated catalyst, leading to the slower formation of carbonaceous deposits and the faster diffusion of their precursors out of the pores.

Chemistry↗
DOE OSTI2020

Utilizing ink composition to tune bulk-electrode gas transport, performance, and operational robustness for a Fe-N-C catalyst in polymer electrolyte fuel cell

With lower site density and turnover frequency, platinum group metal (PGM)-free catalysts based electrodes are often greater than 50 mu m thick in order to increase performance across the fuel cell operating range. Consequently, PGM-free electrodes have an additional bulk electrode transport resistance beyond the local or aggregate level transport in thin platinum-based electrodes. In parallel to the development of more active and durable PGM-free catalysts, advancements in understanding the interplay between PGM-free electrode fabrication, bulk-electrode transport, proton conductivity and performance are needed. Here, the relationship between ionic and gas phase transport through the electrode thickness is modified by adjusting electrocatalyst and ionomer flocculation/interaction at the ink level. The influence of the ink composition (water/n-propanol content) is examined via various in-situ electrochemical and ex-situ characterization techniques and the resulting electrode structure/performance relationship contrasted with electrode performance robustness across a range of relative humidity (RH). For the electrocatalyst examined here, a water-rich (82 wt% H2O) ink formulation was favorable for operation at high RH due to improved molecular diffusion through larger electrode pores. In contrast, the improved interactions between ionomer and electrocatalyst enabled a more robust electrode and higher performance during low RH operation for the 50 wt% H2O content ink.

08 HYDROGEN↗
DOE OSTI2021

Catalytic decomposition of methane into hydrogen and high-value carbons: combined experimental and DFT computational study

Thermocatalytic decomposition (TCD) of methane can produce hydrogen and valuable nanocarbon co-products with low to near-zero CO2 emission. In this study, a series of Pd promoted Ni catalysts, prepared with various Ni/Pd ratios on a CNT support, were evaluated for methane TCD performance. Characterization and calculations using density functional theory (DFT) were carried out to elucidate the activity–structure relationship and growth mechanism of carbon nanomaterials. It was found that the methane conversion and stability of the catalysts were highly dependent on the Ni/Pd ratio and reaction temperature. DFT calculations revealed that the diffusion of carbon in the metal sublayer required for CNT growth was more favorable in the Ni–Pd alloy lattice suggesting that the buildup of carbon in the metal alloy sublayer facilitated the formation of CNTs and CNFs. A cyclic reaction–regeneration process for self-sustained TCD was experimentally demonstrated. In each cycle, a portion of the separated CNT product was used to re-synthesize the Ni–Pd/CNT catalyst for use in the next reaction cycle. After five cycles of operation, the CH4 conversion, morphology and crystallinity of the carbon product remained unchanged.

Wang, I-Wen↗
DOE OSTI2022

Atomically Precise Single Metal Oxide Cluster Catalyst with Oxygen–Controlled Activity

Single cluster catalysts (SCCs) consisting of atomically precise metal nanoclusters dispersed on supports represent a new frontier of heterogeneous catalysis. However, the ability to synthesize SCCs with high loading and to precisely introduce non-metal atoms to further tune their catalytic activity and reaction scope of SCCs have been longstanding challenges. In this work, a new interface confinement strategy is developed for the synthesis of a high density of atomically precise Ru oxide nanoclusters (Ru 3 O 2 ) on reduced graphene oxide (rGO), attributed to the suppression of diffusion-induced metal cluster aggregation. Ru 3 O 2 /rGO exhibits a significantly enhanced activity for oxidative dehydrogenation of 1,2,3,4-tetrahydroquinoline (THQ) to quinoline with a high yield (≈86%) and selectivity (≈99%), superior to Ru and RuO 2 nanoparticles, and homogeneous single/multiple-site Ru catalysts. In addition, Ru 3 O 2 /rGO is also capable of efficiently catalyzing more complex oxidative reactions involving three reactants. The theoretical calculations reveal that the presence of two oxygen atoms in the Ru 3 O 2 motif not only leads to a weak hydrogen bonding interaction between the THQ reactant and the active site, but also dramatically depletes the density of states near the Fermi level, which is attributed to the increased positive valence state of Ru and the enhanced oxidative activity of the Ru 3 O 2 cluster for hydrogen abstraction.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Discerning structure sensitivity of Ni-core Pd-shell nanoparticles for enhanced nitrite reduction

Denitrification using Pd-based catalysts converts N-oxyanions into harmless products. However, the metal cost and scarcity are barriers to application. In this work, we synthesize water-suspended, structure-controlled Ni-core/Pd-shell nanoparticles (Ni@Pd NPs) that show Pd-catalyzed nitrite (NO 2 − ) reduction catalysis promoted by Ni. The NPs immobilized on Al 2 O 3 (0.47 wt % Pd and 0.74 wt % Ni) have higher NH 4 + selectivity and higher catalytic activity than wet-impregnated Pd/Al 2 O 3 (1.0 wt % Pd), i.e., 315.4 vs. 132.1 Lg surface Pd −1 min −1 . X-ray photoelectron spectroscopy (XPS) and CO-diffuse reflectance infrared Fourier transform spectroscopy (CO-DRIFTS) analyses show that Ni increases Pd electron density, which is proposed to lower the bond dissociation energy barrier for nitric oxide surface intermediate. Low-coordinated Pd atoms correlate to high activity and low NH 4 + selectivity. Using CatCost software, we estimate Ni@Pd/Al 2 O 3 to have a ∼40% lower manufacturing cost compared to wet-impregnated Pd/Al 2 O 3 . This rationally designed catalyst illustrates how nickel promotes Pd catalysis and how Pd usage can be lowered for denitrification and other hydrogenation reactions.

CO-DRIFTS↗
DOE OSTI2021

Sensitivity and Effective Parameterization of a Multi-Scale Model of Proton-Exchange-Membrane Water Electrolysis

The development of proton-exchange-membrane water electrolysis (PEMWE) is crucial to establishing a green-hydrogen infrastructure. Active research in hydrogen technologies is focused on minimizing costs, improving efficiency, and mitigating safety risks. In this study, sensitivity analyses were performed using a physics-based model and used to identify critical parameters capable of reducing overpotentials and safety risks. These parameters include operational (i.e. temperature), structural (i.e. thickness of the components), and material properties (i.e. exchange current density). Simulated results suggest that better engineering of the membrane electrode assemblies (MEA) can offset intrinsic limitations. Membrane thickness and conductivity yielded the largest percent change on performance. Gas crossover was observed to be sensitive to diffusion, solubility, and bubble formation. Current density regimes were identified, where each crossover parameter was most influential. MEA parameterization serves as a framework for theoretical PEMWE optimization simulations and input for design criteria for future research targets.

Dizon, A↗
DOE OSTI2024

Effect of Hydrogen and Helium on Irradiation Damage Accumulation in Nickel

We report our results on the study of the effects of hydrogen and helium on irradiation damage accumulation in nickel, aiming to understand the TEM observations made by Edwards et al. regarding the Ni-coatings protecting the getter tube in a TPBAR. We hypothesized that differences in the fluxes of 3 H and/or He between the coatings might explain these microstructural variations. However, our simulation results show that during the initial stages of irradiation, the presence of H or He enhances void nucleation by stabilizing small vacancy clusters against thermal dissociation and does not enhance void growth. Nevertheless, we think that helium’s higher diffusivity, stronger binding with vacancy clusters, and ability to displace a nearby lattice atom—either to create a new vacancy or to enlarge an existing vacancy cluster—could result in a larger average vacancy cluster size. Therefore, it is likely that void growth will occur post-nucleation phase as more He accumulates at higher doses than those simulated in this study.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Demystifying the Diffuse Vibrational Spectrum of Aqueous Protons Through Cold Cluster Spectroscopy

The ease with which the pH is routinely determined for aqueous solutions masks the fact that the cationic product of Arrhenius acid dissolution, the hydrated proton, or H + (aq), is a remarkably complex species. Here, we review how results obtained over the past 30 years in the study of H + &middot;(H 2 O) n cluster ions isolated in the gas phase shed light on the chemical nature of H + (aq). This effort has also revealed molecular-level aspects of the Grotthuss relay mechanism for positive-charge translocation in water. Recently developed methods involving cryogenic cooling in radiofrequency ion traps and the application of two-color, infrared–infrared (IR–IR) double-resonance spectroscopy have established a clear picture of how local hydrogen-bond topology drives the diverse spectral signatures of the excess proton. This information now enables a new generation of cluster studies designed to unravel the microscopic mechanics underlying the ultrafast relaxation dynamics displayed by H + (aq).

Chemistry↗
DOE OSTI2026

Molecular insights into CO 2 -to-bicarbonate transformation in functionalized anion exchange ionomers for electrochemical separations

Bipolar membrane (BPM) electrochemical processes are a promising platform for carbon dioxide (CO 2 ) separations, but the molecular level thermodynamic and kinetic understanding of CO 2 -to-bicarbonate (HCO 3 − ) transformation remain poorly understood. This study employs a multiscale computational approach to systematically explore the adsorption and reactive transformation of CO 2 in five anion exchange ionomer systems. Classical molecular dynamics (MD) simulation results demonstrate that polymers with imidazolium groups significantly reduce CO 2 diffusion and enhance (OH − )–CO 2 interactions due to stronger electrostatic and π-interactions. Compared to the commonly used quaternary ammonium ionomers, imidazolium-functionalized ionomers show improved CO 2 proximity and interaction strength. Ab initio MD and density functional theory (DFT) calculations reveal that the benzyl-substituted imidazolium (IM-Ben) substantially reduces the energy barrier for HCO 3 − formation (∼72 meV lower) compared to the alkyl-substituted IM-nBu, while also mitigating imidazolium deprotonation under moderate hydration conditions. Transition state analysis shows IM-Ben forms more extensive hydrogen-bonding networks, which stabilize the transition state structure and contribute to a lower energy barrier for bicarbonate formation. These findings highlight the advantage of the adjacent benzyl moiety in enabling efficient CO 2 -to-bicarbonate transformation via hydrated hydroxide ion counterions, offering mechanistic insights and clear molecular design principles for optimizing anion exchange ionomers at bipolar membrane interfaces for electrochemical CO 2 separation applications.

Bipolar membranes, Reactive transformation of CO2,↗
DOE OSTI2021

Potential Foldamers Based on an ortho- Terphenyl Amino Acid

We describe the synthesis and characterization of a new class of oligomers built from a terphenyl-based amino acid. Here, these oligomeric amides are of interest because the adoption of specific conformations could potentially be driven by the coordinated formation of inter-residue hydrogen bonds and aromatic interactions. Although high-resolution structural data have proven inaccessible, circular dichroism and nuclear magnetic resonance studies suggest that the new oligomers fold concomitantly with discrete self-association in chloroform. Molecular simulations find no sign of folding as a monomer, and in fact suggest that hydrogen bond patterning is anti-cooperative, inhibiting longer helices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tritiated Water Disposition Strategies

Tritium, a radioactive isotope of hydrogen, is typically confined within one or more confinement barriers. Tritium readily reacts with oxygen to form tritiated water or can exchange with protium or deuterium atoms in water to create tritiated water which is around 10,000 times more toxic than elemental tritium. Primary tritium confinement systems can create small volumes of highly tritiated water. Secondary confinement systems, like inert gloveboxes, will produce larger volumes of lower concentration tritiated water. Much larger volumes of tritiated water of very low tritium content are produced by tritium permeation/diffusion. Tritium from inside primary and secondary confinement barriers will diffuse from these systems into cooling water systems. Closed loop, recirculating cooling water systems will slowly accumulate tritium and create concentrations which exceed drinking water (or permitted discharge) concentrations. The cooling water systems designed as series of interconnected cooling loops that can slowly transfer tritium from one cooling loop to another cooling loop through heat exchangers. These large volumes of tritiated water may be above federal discharge limits and also lack convenient disposition pathways. This document will discuss tritiated water management strategies from the perspective of large volume, low tritium concentrations that exceed drinking water or permitted discharge limits. Applicable US regulatory requirements for a Molybdenum-99 (Mo-99) production facility concerning tritiated water are also cited. Tritiated water disposition options, based on typical waste minimization strategies will guide dispositions options. A Case Study example is presented to illustrate the pros and cons of several disposition options. The report does not recommend any particular disposition pathway but discusses strategies to be explored by a producer to guide selection of processes which best fits the needs of a particular waste stream.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Photoresponsive Azobenzene-Functionalized Shell Cross-Linked Micelles for Selective Asymmetric Transfer Hydrogenation

We describe the substrate-selective asymmetric transfer hydrogenation of aromatic ketones using rhodium complexes immobilized on a photoresponsive nanoreactor. The nanoreactor is based on multifunctional amphiphilic poly(2-oxazoline)s that are covalently cross-linked with functionalized azobenzene after micelle formation in water. The nanoreactor switches its morphology upon light irradiation in a wavelength-selective manner as confirmed by dynamic light scattering. Kinetic studies show that the gated behavior induced by the phototriggered reversible isomerization of trans- azobenzene to cis- azobenzene in the cross-linking layer is key to discriminate among substrates and reagents during catalysis. Under UV light irradiation, the diffusion of larger substrates into the core is slower in comparison to smaller substrates. The nanoreactor displays substrate selectivity, converting smaller ketone-substrates faster to the corresponding secondary alcohols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Critical Practices in Rigorously Assessing the Inherent Activity of Nanoparticle Electrocatalysts

Accurate activity measurements for electrocatalytic materials are the backbone of impactful electrocatalyst research. Inherent to accurate measurements is the correct accounting of the active catalyst sites and the design of experiments to ensure that these sites are participating in the measured reaction. Improvements in electrocatalyst activity for fuel cell reactions (hydrogen oxidation and oxygen reduction) are essential for the widespread adoption of this carbon-neutral energy source. Activities for these half-reactions can be reported in a variety of ways including specific activities, mass activities, volumetric activities, and half-wave potentials. These values are traditionally measured with a rotating disk electrode (RDE) in which the electrocatalyst is supported on a porous active layer film attached to the RDE. To accurately measure electrocatalyst activity with an RDE, two major sources of errors must be addressed: (i) accurate electrochemical surface area (ECSA) quantification and (ii) fast diffusion of reactants through the active layer film. In this contribution, we first aim to detail through RDE experiments and mass transport modeling the potential errors that can be observed when these factors are not properly addressed. We then present recommendations and discuss techniques for properly constructing electrocatalyst thin films and characterizing the ECSA on monometallic and novel alloy electrocatalysts. These practices, when adopted, ensure greater confidence and reliability in reports of electrocatalyst activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A chemo-mechanical model for describing sorption hysteresis in a glassy polyurethane

Abstract Hysteretic sorption and desorption of water is observed from 0 to 95% relative humidity and 298–333 K on a glassy polyurethane foam. It is postulated that sorption-induced swelling of the glassy polyurethane increases the concentration of accessible hydrogen-bonding adsorption sites for water. The accessibility of sites is kinetically controlled due to the restricted thermal motions of chains in the glassy polymer, causing a difference in accessible site concentrations during sorption and desorption. This discrepancy leads to hysteresis in the sorbed concentrations of water. A coupled chemo-mechanical model relating volumetric strain, adsorption site concentration, and sorbed water concentration is employed to describe water sorption hysteresis in the glassy polyurethane. This model not only describes the final mass uptake for each relative humidity step, but also captures the dynamics of water uptake, which exhibit diffusion and relaxation rate-controlled regimes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Low Temperature Water-Gas Shift: Enhancing Stability through Optimizing Rb Loading on Pt/ZrO 2

Recent studies have shown that appropriate levels of alkali promotion can significantly improve the rate of low-temperature water gas shift (LT-WGS) on a range of catalysts. At sufficient loadings, the alkali metal can weaken the formate C–H bond and promote formate dehydrogenation, which is the proposed rate determining step in the formate associative mechanism. In a continuation of these studies, the effect of Rb promotion on Pt/ZrO 2 is examined herein. Pt/ZrO 2 catalysts were prepared with several different Rb loadings and characterized using temperature programmed reduction mass spectrometry (TPR-MS), temperature programmed desorption (TPD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), an X-ray absorption near edge spectroscopy (XANES) difference procedure, extended X-ray absorption fine structure spectroscopy (EXAFS) fitting, TPR-EXAFS/XANES, and reactor testing. At loadings of 2.79% Rb or higher, a significant shift was seen in the formate ν(CH) band. The results showed that a Rb loading of 4.65%, significantly improves the rate of formate decomposition in the presence of steam via weakening the formate C–H bond. However, excessive rubidium loading led to the increase in stability of a second intermediate, carbonate and inhibited hydrogen transfer reactions on Pt through surface blocking and accelerated agglomeration during catalyst activation. Optimal catalytic performance was achieved with loadings in the range of 0.55–0.93% Rb, where the catalyst maintained high activity and exhibited higher stability in comparison with the unpromoted catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗