Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microscope and microscopy.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Effect of Chemical Composition on the Microstructure and Tribological Properties of Sn-Based Alloys

This article presents the test results of two bearing alloys on a tin matrix, differing in the content of alloy additions. Microscopic tests were performed using scanning electron microscopy, along with Brinell hardness tests and tests of tribological properties in the conditions of technical dry friction and wet friction using a TU-32 oil. Additionally, wear mechanisms were analyzed depending on the process conditions. The results indicate better tribological properties of the B82 alloy, with a higher content of antimony compared to the B89 alloy. This alloy contains more precipitates of hard phase β—SnSb, which both influence the level of the mechanical properties and determine the tribological properties. Additionally, it was proven that using the TU-32 oil as a lubricant practically eliminates adhesive wear, and the post-friction surfaces for both alloys are of a similar nature.

36 MATERIALS SCIENCE↗

Investigating calcite growth rates using a quartz crystal microbalance with dissipation (QCM-D)

Calcite precipitation plays a significant role in processes such as geological carbon sequestration and toxic metal sequestration and, yet, the rates and mechanisms of calcite growth under close to equilibrium conditions are far from well understood. In this study, a quartz crystal microbalance with dissipation (QCM-D) was used for the first time to measure macroscopic calcite growth rates. Calcite seed crystals were first nucleated and grown on sensors, then growth rates of calcite seed crystals were measured in real-time under close to equilibrium conditions (saturation index, SI = log ({Ca 2+ }/{CO 3 2– }/ K sp ) = 0.01–0.7, where {i} represent ion activities and K sp = 10 –8.48 is the calcite thermodynamic solubility constant). At the end of the experiments, total masses of calcite crystals on sensors measured by QCM-D and inductively coupled plasma mass spectrometry (ICP-MS) were consistent, validating the QCM-D measurements. Calcite growth rates measured by QCM-D were compared with reported macroscopic growth rates measured with auto-titration, ICP-MS, and microbalance. Calcite growth rates measured by QCM-D were also compared with microscopic growth rates measured by atomic force microscopy (AFM) and with rates predicted by two process-based crystal growth models. The discrepancies in growth rates among AFM measurements and model predictions appear to mainly arise from differences in step densities, and the step velocities were consistent among the AFM measurements as well as with both model predictions. Using the predicted steady-state step velocity and the measured step densities, both models predict well the growth rates measured using QCM-D and AFM. Furthermore, this study provides valuable insights into the effects of reactive site densities on calcite growth rate, which may help design future growth models to predict transient-state step densities.

58 GEOSCIENCES↗

Effect of 4 wt.% Cr on microstructure, corrosion resistance and tribological properties of Fe{sub 3}Al–20 wt.%Al{sub 2}O{sub 3} composites

Fe{sub 3}Al–20 wt.%Al{sub 2}O{sub 3} ultrafine grained composites with 4 wt.% Cr were prepared by mechanical alloying inducing self propagating high temperature synthesis with subsequent plasma activated sintering. Microstructures of the composites were studied by X-ray diffraction, scanning electron microscopy, energy dispersive spectrum and transmission electron microscope. Then the relative density, room temperature hardness, static corrosion resistance and dry sliding wear behavior at a temperature range of 25 °C–800 °C of the sintered samples were tested and analyzed. The results showed that the composites had high hardness and a good microstructure with fine grain size, high relative density. The composites with 4 wt.% Cr amount also exhibited excellent comprehensive tribological properties at medium–high temperatures especially at a temperature above 500 °C, although the wear resistance did not be improved at 25 °C–500 °C. 4 wt.% Cr element addition improved the corrosion resistance of the composites significantly with the corrosion loss decreasing by 19.48%. - Highlights: ► In-situ Fe{sub 3}Al–20 wt.%Al{sub 2}O{sub 3} composites with 4 wt.% Cr was prepared by MA-PAS. ► Composites had good tribological properties at the temperature above 500 °C. ► Corrosion resistance was improved obviously by 4 wt.% Cr amount.

36 MATERIALS SCIENCE↗

Substitutional nitrogen-doped tin oxide single crystalline submicrorod arrays: Vertical growth, band gap tuning and visible light-driven photocatalysis

High-density substitutional N-doped SnO{sub 2} submicrorod arrays were grown on Si and quartz substrates by catalysts-free reactive sputtering. Scanning electron microscope and high-resolution transmission electron microscopy results show that the submicrorods are vertically aligned single crystal with quasi-tetrahedral pyramid shape nanotip at the top end. The density and the shape of the submicrorods can be modulated by the nitrogen partial pressure. Ellipsometry and optical absorption characterization show that after substitutional N-doping, the band gap of N-doped SnO{sub 2} submicrorod shifts toward visible light region (up to 624 nm), and the visible light absorption are significantly enhanced due to the band gap narrowing. The photodegradation of methylene blue by N-doped SnO{sub 2} submicrorod under visible light illumination is demonstrated, and it was found that the surface-to-volume ratio plays an important role in achieving high photocatalytic reactivity. The SnO{sub 2}:N submicrorod arrays with visible light band gap may have potential applications in solar cells electrode and visible light sensitive photocatalyst.

36 MATERIALS SCIENCE↗

Synthesis of mesoporous Bi{sub 2}O{sub 3}/CeO{sub 2} microsphere for photocatalytic degradation of Orange II dye

Graphical abstract: - Highlights: • Bi{sub 2}O{sub 3}/CeO{sub 2} microspheres were successfully synthesized by a hydrothermal procedure. • Bi{sub 2}O{sub 3}/CeO{sub 2} microspheres were used to remove wastewater pollutant containing azo dye. • The activity of Bi{sub 2}O{sub 3}/CeO{sub 2} is synergically enhanced compared to its pristine forms. - Abstract: We report on the visible-light responsive porous assembly of Bi{sub 2}O{sub 3}/CeO{sub 2} microspheres, which were synthesized via a simple hydrothermal reaction between Bi(NO{sub 3}){sub 3}·5H{sub 2}O and Ce(NO{sub 3}){sub 3}·6H{sub 2}O in the presence of ethylene glycol and ethanol. Systematic structural (X-ray diffraction (XRD)), morphological (field emission scanning electron microscopy (FE-SEM) and transmission electron microscopic (TEM)), BET surface area and diffuse reflectance spectral (DRS) analyses were carried out to characterize the formed product. The effects of experimental parameters on the microstructural and morphological behavior of Bi{sub 2}O{sub 3}/CeO{sub 2} composites were discussed. The semiconductor material as obtained was evaluated as a heterogeneous photocatalyst for the photolytic degradation of an azo dye in water and the degradation was found to follow pseudo-first-order rate kinetics. The study compares the rate constants of the new hybrid catalyst to a pristine Bi{sub 2}O{sub 3} and CeO{sub 2}, which has excellent catalytic properties under visible light irradiation for the degradation of Orange II dye.

36 MATERIALS SCIENCE↗

Novel combustion method to prepare octahedral NiO nanoparticles and its photocatalytic activity

Graphical abstract: - Highlights: • NiO nanoparticles were synthesized by solution combustion method. • Prepared NiO nanoparticles are fcc structure. • Synthesized NiO nanoparticles are octahedral shape. • Shows good photocatalytic activity. - Abstract: Nickel oxide nanoparticles (NiO NPs) were synthesized by solution combustion method using glycine and citric acid as fuels. The X-ray diffraction (XRD) result confirms the face centered cubic (fcc) structure of NiO. The octahedral shape of NiO NPs was confirmed by field emission scanning electron microscope (FESEM) and high resolution transmission electron microscopy (HRTEM). It is possible to suggest that the organic fuel (citric acid/glycine) is responsible for the formation of the octahedral shape due to the easier complex formation. Photocatalytic activity of NiO NPs also evaluated and found that the prepared NiO NPs have high photocatalytic degradation. In the present study, the crystalline nature and shape of the NiO nanoparticles plays a vital role in determining the photocatalytic activity.

36 MATERIALS SCIENCE↗

Controlled manipulation of oxygen vacancies using nanoscale flexoelectricity

Oxygen vacancies, especially their distribution, are directly coupled to the electromagnetic properties of oxides and related emergent functionalities that have implications for device applications. Here using a homoepitaxial strontium titanate thin film, we demonstrate a controlled manipulation of the oxygen vacancy distribution using the mechanical force from a scanning probe microscope tip. By combining Kelvin probe force microscopy imaging and phase-field simulations, we show that oxygen vacancies can move under a stress-gradient-induced depolarisation field. When tailored, this nanoscale flexoelectric effect enables a controlled spatial modulation. In motion, the scanning probe tip thereby deterministically reconfigures the spatial distribution of vacancies. Finally, the ability to locally manipulate oxygen vacancies on-demand provides a tool for the exploration of mesoscale quantum phenomena and engineering multifunctional oxide devices.

36 MATERIALS SCIENCE↗

Foucault imaging by using non-dedicated transmission electron microscope

An electron optical system for observing Foucault images was constructed using a conventional transmission electron microscope without any special equipment for Lorentz microscopy. The objective lens was switched off and an electron beam was converged by a condenser optical system to the crossover on the selected area aperture plane. The selected area aperture was used as an objective aperture to select the deflected beam for Foucault mode, and the successive image-forming lenses were controlled for observation of the specimen images. The irradiation area on the specimen was controlled by selecting the appropriate diameter of the condenser aperture.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Doping concentration driven morphological evolution of Fe doped ZnO nanostructures

In this paper, systematic study of structural, vibrational, and optical properties of undoped and 1-10 at.% Fe doped ZnO nanostructures, synthesized adopting chemical precipitation route, has been reported. Prepared nanostructures were characterized employing an assortment of microscopic and spectroscopic techniques, namely Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray (EDX) Spectroscopy, X-ray Diffraction (XRD), Fourier Transform Infrared (FTIR), Micro-Raman Spectroscopy (μRS), and UV-visible and Photoluminescence (PL) spectroscopy. With Fe incorporation, a gradual morphological transformation of nanostructures is demonstrated vividly through SEM/TEM characterizations. Interestingly, the morphology of nanostructures evolves with 1–10 at. % Fe doping concentration in ZnO. Nanoparticles obtained with 1 at. % Fe evolve to nanorods for 3 at. % Fe; nanorods transform to nanocones (for 5 at. % and 7 at. % Fe) and finally nanocones transform to nanoflakes at 10 at. % Fe. However, at all these stages, concurrence of primary hexagonal phase of Zn{sub 1-x}Fe{sub x}O along with the secondary phases of cubic ZnFe{sub 2}O{sub 4} and rhombohedric Fe{sub 2}O{sub 3}, is revealed through XRD analysis. Based on collective XRD, SEM, TEM, and EDX interpretations, a model for morphological evolution of nanostructures was proposed and the pivotal role of Fe dopant was deciphered. Furthermore, vibrational properties analyzed through Raman and FTIR spectroscopies unravel the intricacies of formation and gradual enhancement of secondary phases with increased Fe concentration. UV-visible and PL spectroscopic analyses provided further insight of optical processes altering with Fe incorporation. The blue shift and gradual quenching of visible photoluminescence with Fe doping was found in accordance with structural and vibrational analyses and explicated accordingly.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of Fe{sub 2}O{sub 3} nanoparticles by simple precipitation method

A simple and efficient synthesis of Iron-oxide nanoparticles was carried out by precipitation method using ferric chloride as precursor and ammonium hydroxide as a stabilizing agent at different calcination temperatures. The synthesized powder was characterized by powder X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscope (FE-SEM) and Transmission Electron Microscopy (TEM). X-ray diffraction indicated the formation hematite Fe{sub 2}O{sub 3} structure. FTIR showed various functional groups of particles and absorption bands related to metal oxygen vibration modes. The heating temperatures were varied at 100 °C, 200°C, and 300°C. The Fe{sub 2}O{sub 3} nanostructures with the average particle size of about 36.22 nm were prepared at 300°C for 4h. TEM study is also confirming the nanosize of Fe{sub 2}O{sub 3} particle. This aqueous precipitation method gives a large scale production of Fe{sub 2}O{sub 3} nanoparticles easily.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of sample anisotropy on scanning near-field optical microscope images

Scattering-type scanning near-field optical microscopy (s-SNOM) has been widely used to characterize strongly correlated electronic, two dimensional, and plasmonic materials, and it has enormous potential for biological applications. Many of these materials exhibit anisotropic responses that complicate the extraction of dielectric constants from s-SNOM measurements. Here, we generalize our recently developed approach for retrieving the near-field scattering signal from isotropic systems and apply it to anisotropic dielectrics. Specifically, we compare our theoretical results with experimental measurements on modestly anisotropic sapphire that exhibit strong resonances at the infrared frequency range. Good agreement with the experimental result is found. Finally, our result is important for understanding the near-field response of low damping, anisotropic polaritonic states in dielectric media.

36 MATERIALS SCIENCE↗

Nano-infrared imaging of epitaxial graphene on SiC revealing doping and thickness inhomogeneities

Here, we report on a nano-infrared (IR) imaging and spectroscopy study of epitaxial graphene on silicon carbide (SiC) by using scattering-type scanning near-field optical microscopy (s-SNOM). With nano-IR imaging, we reveal in real space microscopic domains with distinct IR contrasts. By analyzing the nano-IR, atomic force microscopy, and scanning tunneling microscopy imaging data, we conclude that the imaged domains correspond to single-layer graphene, bilayer graphene (BLG), and higher-doped BLG. With nano-IR spectroscopy, we find that graphene can screen the SiC phonon resonance, and the screening is stronger at more conductive sample regions. Our work offers insights into the rich surface properties of epitaxial graphene and demonstrates s-SNOM as an efficient and effective tool in characterizing graphene and possibly other two-dimensional materials.

2D materials↗

Imaging effectiveness calculator for non-design microscope samples

When attempting to integrate single-molecule fluorescence microscopy with microfabricated devices such as microfluidic channels, fabrication constraints may prevent using traditional coverslips. Instead, the fabricated devices may require imaging through material with a different thickness or index of refraction. Altering either can easily reduce the quality of the image formation (measured by the Strehl ratio) by a factor of 2 or more, reducing the signal-to-noise ratio accordingly. In such cases, successful detection of single-molecule fluorescence may prove difficult or impossible. Furthermore, we provide software to calculate the effect of non-design materials upon the Strehl ratio or ensquared energy and explore the impact of common materials used in microfabrication.

47 OTHER INSTRUMENTATION↗

Experimental approaches to well controlled studies of thin-film nucleation and growth.

Particular features and the performance of two experimental systems are described for quantitative studies of thin-film nucleation and growth processes including epitaxial depositions. System I consists of a modified LEED-Auger instrument combined with high-resolution electron microscopy. System II is a UHV electron microscope adapted for in-situ deposition studies. The two systems complement each other ideally, and the combined use of both can result in a comprehensive investigation of vapor deposition processes not obtainable with any other known method.

Poppa, H.↗

Transmission electron microscopic examination of phosphoric acid fuel cell components

Transmission electron microscopy (TEM) was used to physically characterize tested and untested phosphoric acid fuel cell (PAFC) components. Those examined included carbon-supported platinum catalysts, carbon backing paper, and Teflon-bonded catalyst layers at various stages of fabrication and after testing in pressurized PAFC's. Applicability of electron diffraction and electron energy loss spectroscopy for identifying the various phases was explored. The discussion focuses on the morphology and size distribution of platinum, the morphology and structural aspects of Teflon in catalyst layers, and the structural evidence of carbon corrosion. Reference is made to other physical characterization techniques where appropriate. A qualitative model of the catalyst layer that emerged from the TEM studies is presented.

Pebler, A.↗

Corrosion Failure in Electronic Devices for Aerospace Application

Corrosion of complex electronic systems is a growing and expensive concern. New materials and technology are constantly being introduced to increase performance of devices. There are many factors that can induce a corrosive environment during the various stages of manufacturing, processing, transport, and storage of these devices. The scope of this paper was to identify potential causes for the corrosion failure of optocoupler batches being used in launch applications. Optical microscope with surface profile measurements, scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), and X-ray photoelectron spectroscopy (XPS) were used to identify and analyze the source of these failure. These studies revealed that the loss of adhesion between the electrolytic plated gold and nickel layers is the critical area that traps impurity ions into the chip allowing for blisters to form along the pins of the optocoupler.

Corrosion↗