Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Modeling and Simulation of Phased Array Antennas to Support Next-Generation Satellite Design

Developing enhanced simulation capabilities has become a significant priority for the Space Communications and Navigation (SCaN) project at NASA as new space communications technologies are proposed to replace aging NASA communications assets, such as the Tracking and Data Relay Satellite System (TDRSS). When developing the architecture for these new space communications assets, it is important to develop updated modeling and simulation methodologies, such that competing architectures can be weighed against one another and the optimal path forward can be determined. There have been many simulation tools developed here at NASA for the simulation of single RF link budgets, or for the modeling and simulation of an entire network of spacecraft and their supporting SCaN network elements. However, the modeling capabilities are never fully complete and as new technologies are proposed, gaps are identified. One such gap is the ability to rapidly develop high fidelity simulation models of electronically steerable phased array systems. As future relay satellite architectures are proposed that include optical communications links, electronically steerable antennas will become more desirable due to the reduction in platform vibration introduced by mechanically steerable devices. In this research, we investigate how modeling of these antennas can be introduced into out overall simulation and modeling structure. The ultimate goal of this research is two-fold. First, to enable NASA engineers to model various proposed simulation architectures and determine which proposed architecture meets the given architectural requirements. Second, given a set of communications link requirements for a proposed satellite architecture, determine the optimal configuration for a phased array antenna. There is a variety of tools available that can be used to model phased array antennas. To meet our stated goals, the first objective of this research is to compare the subset of tools available to us, trading-off modeling fidelity of the tool with simulation performance. When comparing several proposed architectures, higher- fidelity modeling may be desirable, however, when iterating a proposed set of communication link requirements across ranges of phased array configuration parameters, the practicality of performance becomes a significant requirement. In either case, a minimum simulation - fidelity must be met, regardless of performance considerations, which will be discussed in this research. Given a suitable set of phased array modeling tools, this research then focuses on integration with current SCaN modeling and simulation tools. While properly modeling the antenna elements of a system are vital, this is only a small part of the end-to-end communication path between a satellite and the supporting ground station and/or relay satellite assets. To properly model a proposed simulation architecture, this toolset must be integrated with other commercial and government development tools, such that the overall architecture can be examined in terms of communications, reliability, and cost. In this research, integration with previously developed communication tools is investigated.

Phased Array↗

Hypersonic Research Facilities Study - Volume III, Part 2: Phase II Parametric Studies Flight Vehicle Synthesis

Airbreathing hypersonic aircraft employing liquid hydrogen fuel have the potential of satisfying a number of mission requirements in the 1980-2000 time period. However, major advances in the technological state of the art are necessary before such aircraft can be considered either feasible or practical. The objective was to assess the research and development requirements for hypersonic aircraft and based on these requirements, to provide the NASA with characteristics of a number of desirable hypersonic research facilities. The study is organized in three phases. Phase I was a preliminary analysis of a broad group of concepts which were reduced to seven flight research facilities and eleven ground research facilities for Phase II study. The purpose of Phase II was to perform parametric studies to refine the facility designs and obtain sensitivity information in the neighborhood of "near optimum" designs, and to select those facilities that appear most attractive in the sense of research potential vs cost for further refinement in Phase III. This part of Volume III presents the results of the synthesis of the flight research facilities.

Source record↗

The relationship between phase stability and frequency stability and a method of converting between them

A method is presented for obtaining the value of the phase stability from time domain frequency stability measurements. Definition of frequency and phase stability are presented. The various types of noise sources in an oscillator and how their location in the oscillator circuitry determines the resultant phase and frequency noise spectrum are described. With this knowledge, the type of noise spectrum from time domain frequency stability measurements is determined. Using certain conversions, the total phase noise spectrum is obtained, which is integrated to obtain the phase stability. Examples of the conversion process are also presented.

Bohn, P. P.↗

Two Phase Detonation Studies Conducted in 1971

The research covered by this third annual progress report represents a continuation of our efforts devoted to the study of detonation waves in liquid-gas systems. The motivation for the work is associated with liquid propellant rocket motor combustion instability although certainly the studies are also applicable to internal combustion engines, jet propulsion engines, safety aspects of spilled liquid fuel, coal mine explosions, and weaponry. The research has been divided into 5 phases, although all of them are intimately related. For the most part these phases are briefly summarized and the reader is referred to other publications for a more complete treatment. The exception to this is where the material herein represents the only printed information available on the particular facet of the problem. Phase A has been primarily concerned with the breakup and ignition of fuel drops by shock waves. The experimental portion of this study as well as a theoretical treatment of the ignition behavior was completed in the past year. The research is now concentrating on the passage of a shock wave over a burning drop. Phase B has been devoted to the assessment of the approximate energy release pattern in two phase detonations insofar as they affect the significant overpressures observed.

Nicholls, J. A.↗

Two phase pumping of cryogenic propellants

Two-phase cryogenic propellant pumping techniques developed during the past 5 years are discussed. During this period the theory of two-phase pumping of hydrogen was developed into an operational technique that can result in significant benefits to space vehicle propulsion systems. Using two-phase pumping techniques, zero LH2 tank net positive suction head (NPSH) was demonstrated on turbopump and rocket engine firings, and limited experimental results show that two-phase pumping of liquid oxygen is feasible. Design techniques were developed for improving the two-phase pumping capability of inducers.

H P Stinson↗

An experimental and theoretical evaluation of increased thermal diffusivity phase change devices

This study was to experimentally evaluate and mathematically model the performance of phase change thermal control devices containing high thermal conductivity metal matrices. Three aluminum honeycomb filters were evaluated at five different heat flux levels using n-oct-adecane as the test material. The system was mathematically modeled by approximating the partial differential equations with a three-dimensional implicit alternating direction technique. The mathematical model predicts the system quite well. All of the phase change times are predicted. The heating of solid phase is predicted exactly while there is some variation between theoretical and experimental results in the liquid phase. This variation in the liquid phase could be accounted for by the fact that there are some heat losses in the cell and there could be some convection in the experimental system.

White, S. P.↗

Characteristics of nonthermal electrons accelerated during the flash phase of small solar flares

Observations of impulsive hard X-rays and other flash phase emissions from small solar flares are analyzed in order to determine the characteristics of energetic electrons accelerated during the flash phase. The electron spectrum and its time variation are deduced from a model of the X-ray source in which the electron injection is continuous, and the electron energy loss is primarily due to collisions with the ambient plasma and escape into the corona. The instantaneous electron spectrum in the X-ray source, as well as the acceleration spectrum, are found to be nonthermal. The observations are consistent with a flare model having the following properties: (1) the acceleration region is located in the lower corona where the ion density is less than 10 to the 9th power per cubic centimeter, (2) the total kinetic energy of the nonthermal electron is approximately 10 percent of the total flare energy, so that the efficiency of the acceleration process is very high, (3) the nonthermal electrons (and protons) provide energy for all flash phase emissions, (4) the acceleration is a continuous process with a time constant less than 1 second, or a continuous series of impulses each lasting less than 1 second and a total duration of approximately 100 seconds, (5) the electron spectrum continuously hardens during the increasing phase of the X-ray burst and softens during the decreasing phase and, (6) the more energetic flares to not necessarily produce a harder electron spectrum.

Kane, S. R.↗

A study program on large aperture electronic scanning phased array antennas for the shuttle imaging microwave system

Fundamental phased array theory and performance parameters are discussed in terms of their application to microwave radiometry, and four scanning phased arrays representing current examples of state-of-the-art phased array technology are evaluated for potential use as components of the multispectral antenna system for the space shuttle imaging microwave system (SIMS). A discussion of problem areas, both in performance and fabrication is included, with extrapolations of performance characteristics for phased array antennas of increased sizes up to 20 m by 20 m. The possibility of interlacing two or more phased arrays to achieve a multifrequency aperture is considered, and, finally, a specific antenna system is recommended for use with SIMS.

Source record↗

Phase-locked loops

The basic analysis and design procedures are described for the realization of analog phase-locked loops (APLL), hybrid phase-locked loops (HPLL), discrete phase-locked loops, and digital phase-locked loops (DPLL). Basic configurations are diagrammed, and performance curves are given. A discrete communications model is derived and developed. The use of the APLL as an optimum angle demodulator and the Kalman-Bucy approach to APLL design are discussed. The literature in the area of phase-locked loops is reviewed, and an extensive bibliography is given. Although the design of APLLs is fairly well documented, work on discrete, hybrid, and digital PLLs is scattered, and more will have to be done in the future to pinpoint the formal design of DPLLs.

Gupta, S. C.↗

A method for determining optimum phasing of a multiphase propulsion system for a single-stage vehicle with linearized inert weight

A general analytical treatment is presented of a single-stage vehicle with multiple propulsion phases. A closed-form solution for the cost and for the performance and a derivation of the optimal phasing of the propulsion are included. Linearized variations in the inert weight elements are included, and the function to be minimized can be selected. The derivation of optimal phasing results in a set of nonlinear algebraic equations for optimal fuel volumes, for which a solution method is outlined. Three specific example cases are analyzed: minimum gross lift-off weight, minimum inert weight, and a minimized general function for a two-phase vehicle. The results for the two-phase vehicle are applied to the dual-fuel rocket. Comparisons with single-fuel vehicles indicate that dual-fuel vehicles can have lower inert weight either by development of a dual-fuel engine or by parallel burning of separate engines from lift-off.

Martin, J. A.↗

Interplanetary field and plasma during initial phase of geomagnetic storms

Twenty-three geomagnetic storm events during 1966 to 1970 were studied by using simultaneous interplanetary magnetic field and plasma parameters. Explorer 33 and 35 field and plasma data were analyzed on large-scale (hourly) and small-scale (3 min.) during the time interval coincident with the initial phase of the geomagnetic storms. The solar-ecliptic Bz component turns southward at the end of the initial phase, thus triggering the main phase decrease in Dst geomagnetic field. The By component also shows large fluctuations along with Bz. When there are no clear changes in the Bz component, the By shows abrupt changes at the main phase onset. On the small-scale, behavior of the magnetic field and electric field were studied in detail for the three events; it is found that the field fluctuations in By, Bz and Ey and Ez are present in the initial phase. In the large-scale, the behavior field remains quiet because the small-scale variations are averaged out. It appears that large as well as small time scale fluctuations in the interplanetary field and plasma help to alter the internal electromagnetic state of the magnetosphere so that a ring current could causing a geomagnetic storm decrease.

Patel, V. L.↗

A generalized expression for lag-time in the gas-phase permeation of hollow tubes

A generalized expression for the nonsteady-state parameter, lag-time, has been obtained from Fick's second law for gas-phase transport through hollow, cylindrical membranes. This generalized expression is simplified for three limiting cases of practical interest: (1) diffusion controlled transport, (2) phase boundary reaction control at the inlet surface, and (3) phase boundary reaction control at the outlet surface. In all three cases the lag-time expressions were found to be inversely proportional only to the diffusion coefficient and functionally dependent on the membrane radii. Finally, the lag-time expressions were applied to experimentally obtained lag-time data for alpha-phase titanium and alpha-phase iron.

Shah, K. K.↗

Phase and amplitude relationships of wave structure observed in the lower thermosphere

Data from the Atmosphere Explorer-C satellite clearly exhibit wavelike variations in neutral composition, ion density, and electron temperature, which appear to be a general feature of the atmosphere. The neutral constituents do not exhibit uniform wave characteristics since the density variations of argon are approximately twice those of molecular nitrogen and helium structure has about one-half the amplitude of the N2 variation. The waves evident in the ion density are nearly in phase with the heavy neutrals, while the electron-temperature variations are predominantly out of phase with those in the ion density. A simple model is suggested to explain the neutral composition results, wherein the enhancements in the major gas densities are in phase with the vertical component of the perturbation velocity of the gas. The vertical velocity modifies the composition by transporting parcels of air to higher or lower regions where the composition is different. The phase relationship between density and velocity implies phase velocities (assuming that these are gravitational waves) of the order of 500 meters per sec.

Reber, C. A.↗

A decision directed detector for the phase incoherent Gaussian channel

A vector digital signalling scheme is proposed for simultaneous adaptive data transmission and phase estimation. The use of maximum likelihood estimation methods predicts a better performance than the phase-locked loop. The phase estimate is shown to converge to the true value, so that the adaptive nature of the detector effectively achieves phase acquisition and improvement in performance. No separate synchronization interval is required and phase fluctuations can be tracked simultaneously with the transmission of information.

Kazakos, D.↗

Redetermination of the Fe-rich portion of the Fe-Ni-Co phase diagram

The iron rich portion of the Fe-Ni-Co ternary diagram was determined at four temperatures. The phase boundaries and tie-lines of the (alpha + gamma) phase field were measured by analyzing the alpha and gamma phases with an electron microprobe. Grain boundary allotrimorphs of the alpha phase were observed in the polished and etched sections of samples which were step cooled from the gamma phase into the (alpha + gamma) region. Widmanstaetten-type microstructures composed of gamma-precipitates were observed in samples which were directly heated from room temperature into the (alpha + gamma) region.

Widge, S.↗

On estimating the phase of a periodic waveform in additive Gaussian noise, part 1

Motivated by recent advances in technology, a new look is taken at the problem of estimating the phase of a periodic waveform in additive Gaussian noise. The maximum a posteriori probability criterion with signal space interpretation is used to obtain the structures of optimum and some suboptimum phase estimators for the following cases: (1) known constant frequency and unknown constant phase with an a priori distribution; (2) unknown constant frequency and phase with a joint a priori distribution; (3) frequency a parameterized function of time with a joint a priori distribution on parameters and phase and (4) frequency a Gaussian random process.

Rauch, L. L.↗

Connection and validation of narrow-band delta VLBI phase observations

Narrow-band differential very long baseline interferometry required phase connections between consecutive scans. An efficient computer aided scheme for this purpose is presented. This scheme is an iteration process alternating between a grand fit on many scans and integer quantization of the phase shift cycles to be assigned to the scans. Only linear simultaneous equations of a few unknowns need to be solved. A simulation analysis indicates that faultless phase connection can be expected when there is no localized systematic noise. When systematic noise of moderate level exists, the possible incorrect phase connection can be detected and connected for by comparing the connected phases from the two alternating observations, after removing the residual diurnal effects.

Wu, S. C.↗

Phased models for evaluating the performability of computing systems

A phase-by-phase modelling technique is introduced to evaluate a fault tolerant system's ability to execute different sets of computational tasks during different phases of the control process. Intraphase processes are allowed to differ from phase to phase. The probabilities of interphase state transitions are specified by interphase transition matrices. Based on constraints imposed on the intraphase and interphase transition probabilities, various iterative solution methods are developed for calculating system performability.

Wu, L. T.↗