Search NASA⌕ Search

SEARCH · Search NASA

Results for “moss”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Viscous shock-layer solutions for the low-density hypersonic flow past long slender bodies

Results are obtained for the surface pressure, drag, heat-transfer, and skin-friction coefficients for hyperboloids and sphere cones. Body half angles from 5 to 22.5 degrees are considered for various low-density flow conditions. Recently obtained surface-slip and shock-slip equations are employed to account for the low-density effects. The method of solution employed for the viscous shock-layer (VSL) equations is a partially coupled spatial-marching implicit finite-difference technique. The flow cases analyzed include highly cooled long slender bodies in high Mach number flows. The present perfect-gas VSL calculations compare quite well with available experimental data. Results have also been obtained from the steady-state Navier-Stokes (NS) equations by successive approximations. Comparison between the NS and VSL results indicates that VSL equations even with body and shock-slip boundary conditions may not be adequate in the stagnation region at altitudes greater than about 75 km for the cases analyzed here.

Gupta, R. N.↗

Optical evidence for the metallization of Xenon at 132(5) GPa

Xe has been compressed in a diamond-anvil cell to approximately 200 GPa. The metallization of Xe by band-gap closure was investigated by obtaining optical data in both the metallic and insulating states. In the metallic state, the pressure dependence of the plasma frequency was determined from absorption data fitted with a free-electron model. In the insulating state, the pressure dependence of the band gap was determined from absorption data fitted with an indirect-band-gap model. The optical data indicate that the insulator-to-metal transition in Xe occurs at 132(5) GPa.

Goettel, Kenneth A.↗

Hypersonic rarefied flow about plates at incidence

The direct-simulation Monte Carlo method has been used in a numerical study of the transitional flow about two plate configurations at incidence; one of the two plates, both of which are 12 m long, has zero thickness, while the other has a thickness of 0.5 m and a node radius of 0.5 m. The flow conditions simulated are those of the Space Shuttle Orbiter during 7.5 km/hr reentry, in the 200-100 km altitude range encompassing most of the transitional flow for this vehicle. The results obtained clearly demonstrate that transitional effects are significant even at those altitudes where the flow about a typical space vehicle has been considered free-molecular.

Dogra, Virendra K.↗

Study of hypersonic flow past sharp cones

Calculations using the direct simulation Monte Carlo (DSMC) method of Bird for flow past sharp cones in the near continuum to free molecule flow regime are presented and compared with experiment. It is found that results are sensitive to the grid and the interaction potential. Moreover, the time counter method was found to be as accurate as other methods when the solution is grid independent. Finally, the results show that the effects of the wake on the forebody surface properties are minimal.

Taylor, Jeff C.↗

MOXE: An X-ray all-sky monitor for Soviet Spectrum-X-Gamma Mission

A Monitoring Monitoring X-Ray Equipment (MOXE) is being developed for the Soviet Spectrum-X-Gamma Mission. MOXE is an X-ray all-sky monitor based on array of pinhole cameras, to be provided via a collaboration between Goddard Space Flight Center and Los Alamos National Laboratory. The objectives are to alert other observers on Spectrum-X-Gamma and other platforms of interesting transient activity, and to synoptically monitor the X-ray sky and study long-term changes in X-ray binaries. MOXE will be sensitive to sources as faint as 2 milliCrab (5 sigma) in 1 day, and cover the 2 to 20 KeV band.

Priedhorsky, W.↗

Design considerations for a space database

Part of the information used in a real-time simulator is stored in the visual database. This information is processed by an image generator and displayed as a real-time visual image. The database must be constructed in a specific format, and it should efficiently utilize the capacities of the image generator that is was created for. A visual simulation is crucially dependent upon the success with which the database provides visual cues and recognizable scenes. For this reason, more and more attention is being paid to the art and science of creating effective real-time visual databases. Investigated here are the database design considerations required for a space-oriented real-time simulator. Space applications often require unique designs that correspond closely to the particular image-generator hardware and visual-database-management software. Specific examples from the databases constructed for NASA and its Evans and Sutherland CT6 image generator illustrate the various design strategies used in a space-simulation environment. These database design considerations are essential for all who would create a space database.

Moss, Lance M.↗

Laboratory characterization of direct readout Si:Sb and Si:Ga infrared detector arrays

Highlights of recent results obtained at Ames Research Center in performance evaluations of infrared detector arrays are presented. Antimony- and gallium-doped silicon direct readout 58x62 element hybrid devices from Ames' ongoing detector technology development program are described. The observed characteristics meet most of the performance goals specified by the Space Infrared Telescope Facility (SIRTF) instrument teams and compare favorably with the best performance reported for discrete non-integrating extrinsic silicon detectors. Initial results of radiation environment testing are reported, and non-ideal behavior demonstrated by these test devices is discussed.

Mckelvey, Mark E.↗

Direct simulation of hypersonic rarefied flow about a delta wing

Three-dimensional hypersonic rarefied flow about a delta wing at angle of incidence has been studied using the direct simulation Monte Carlo technique. Results are obtained for a transitional flow case which has been investigated in a nitrogen wind-tunnel experiment. The simulations are performed using a nonreacting, single-species gas model that accounts for rotational and vibrational internal energies. The computations yield an attached leeside flow associated with supersonic expansion over the leeside of the wing. Results are presented for the computed flowfield and surface quantities and overall aerodynamic coefficients.

Celenligil, M. Cevdet↗

Direct simulation of AFE forebody and wake flow with thermal radiation

Calculated results for the flowfield structure and surface quantities are presented for an axisymmetric representation of an aeroassist flight experiment vehicle. The direct simulation Monte Carlo (DSMC) method is used to perform the calculations, since the flow is highly nonequilibrium about the vehicle during both the compression and expansion phases. The body configuration is an elliptically blunt nose followed by a skirt with a circular radius and an afterbody. Freestream conditions correspond to a single point along the entry trajectory at an altitude of 90 km and a velocity of 9.9 km/s. The calculations account for nonequilibrium in the translational and internal modes, dissociation, ionization, and thermal radiation. The degree of dissociation is large, but the maximum ionization is only about 2 percent by mole fraction. The blunt forebody flow experiences a high degree of thermal nonequilibrium in which the translational temperature is generally greater than the internal temperature. However, as the flow expands about the aerobrake skirt and afterbody, the internal temperature is generally greater than the translational temperature.

Moss, James N.↗

Direct simulation of three-dimensional flow about the AFE vehicle at high altitudes

Three-dimensional hypersonic rarefied flow about the Aeroassist Flight Experiment (AFE) vehicle was studied using the direct simulation Monte Carlo (DSMC) technique. Results are presented for the transitional flow regime encountered between 120 and 200 km altitudes with a reentry velocity of 9.92 km/s. In the simulations, a five-species reacting real-gas model that accounts for internal energies (rotational and vibrational) is used. The results indicate that the transitional effects are significant even at an altitude of 200 km and influence the overall vehicle aerodynamics. For the cases considered, the aerodynamic coefficients, surface pressures, convective heating, and flow field structure variations with rarefaction effects are presented.

Celenligil, M. Cevdet↗

Rarefied flow past a flat plate at incidence

Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for the transitional flow about a flat plate at 40 deg incidence. The plate has zero thickness and a length of 1.0 m. The flow conditions simulated are those experienced by the Shuttle Orbiter during reentry at 7.5 km/s. The range of freestream conditions are such that the freestream Knudsen number values are between 0.02 and 8.4, i.e., conditions that encompass most of the transitional flow regime. The DSMC simulations show that transitional effects are evident when compared with free molecule results for all cases considered. The calculated results demonstrate clearly the necessity of having a means of identifying the effects of transitional flow when making aerodynamic flight measurements as are currently being made with the Space Shuttle Orbiter vehicles. Previous flight data analyses have relied exclusively on adjustments in the gas-surface interaction models without accounting for the transitional effect which can be comparable in magnitude. The present calculations show that the transitional effect at 175 km would increase the Space Shuttle Orbiter lift-drag ratio by 90 percent over the free molecule value.

Dogra, Virendra K.↗

Monte Carlo simulation of vibrational relaxation in nitrogen

Monte Carlo simulation of nonequilibrium vibrational relaxation of (rotationless) N2 using transition probabilities form an extended SSH theory is presented. For the range of temperatures considered, 4000-8000 K, the vibrational levels were found to be reasonably close to an equilibrium distribution at an average vibrational temperature based on the vibrational energy of the gas. As a result, they do not show any statistically significant evidence of the bottleneck observed in earlier studies of N2. Based on this finding, it appears that, for the temperature range considered, dissociation commences after all vibrational levels equilibrate at the translational temperature.

Olynick, David P.↗

Test chamber for low-background IR focal plane testing

A unique and versatile vacuum chamber has been designed for JPL's IR Focal Plane Technology Group. This chamber is equipped with multiple ports for cryogen and electrical vacuum feedthroughs, pumping units, vacuum gages, sources, and detector camera heads. The design incorporates a liquid-nitrogen-cooled optical table and radiation shield for low-background IR detector testing. Focal planes can be tested at temperatures ranging from 300 K to that of liquid helium. This paper describes the design and construction of this low-background IR focal plane test chamber and discusses some of its distinctive features. An analysis of the test chamber's performance is also presented.

Staller, Craig↗

Enhancements and applications of DSMC for hypersonic rarefied flows

A review of the direct simulation Monte Carlo (DSMC) method of Bird is presented. The DSMC method provides the capability of simulating real gas flows in the rarefield flow regime. Recent developments and applications of the method for hypersonic flows are reported for both ground-based tests and during entry. The flows considered were three-dimensional, and both an existing general code and a new code under development were used.

Moss, James N.↗