Search NASA⌕ Search

SEARCH · Search NASA

Results for “α' precipitates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Additively-manufactured Al-0.3Zr-0.2Ce-0.2Cu alloy with high creep resistance and electrical conductivity

Here, a new, solute-lean Al-0.3Zr-0.2Ce-0.2Cu (wt.%) alloy is developed for additive manufacturing that overcomes the classical tradeoff between conductivity and creep resistance. The rapid-cooling-enabled supersaturation of Zr, and its uniform distribution in α-Al matrix, along with formation of submicron (Ce,Cu)-rich intermetallic particles on solidification lead to unusually high creep resistance at 200 °C. Near-zero secondary creep rates are achieved up to the alloy yield stress (YS) of 65 MPa at 200 °C in as-fabricated state. The Zr-solute-induced dislocation-climb suppression mechanism underlying this improvement also restricts dynamic recovery above YS, as noted from appreciable primary creep and its transitioning to near-zero secondary creep rates. A combination of relatively coarse, epitaxially-grown α-Al grains, low Zr concentration in α-Al, and the impurity-scavenging effect of Ce to purify α-Al matrix produces high electrical conductivity of ∼48 %IACS. Aging precipitation of L1 2 -Al 3 Zr nanoprecipitates doubles the YS (to ∼150 MPa) at room temperature and increases alloy conductivity to ∼58 %IACS, but loss of solid-solution Zr out of α-Al matrix leads to activation of dislocation climb, degrading the creep properties as compared to the supersaturated Al-Zr solid solution in the as-fabricated state. Compared to L1 2 -Al 3 Zr nanoprecipitates, submicron (Ce,Cu)-rich particles formed on solidification are more effective at impeding dislocation climb, producing a threshold stress for dislocation creep of ∼ 50 MPa at 200 °C. The new alloy design concepts, especially solute-induced dislocation-climb suppression for creep resistance, explored here may pave way for the design of new metallic alloys for thermal/electrical conductors and other high-temperature applications.

Additive Manufacturing↗
DOE OSTI2022

Delayed onset of discontinuous precipitation-based phase transformation in U10Mo alloys doped with Silicon

A uranium-10 wt% molybdenum (U-10Mo) alloy is one of the primary candidates for metallic fuels that would use low-enriched uranium in place of highly enriched uranium, to support nuclear nonproliferation efforts. Optimal performance of a U-based metallic nuclear fuel can be achieved by retaining the high-temperature, body-centered cubic (bcc) allotrope (γ-U) at room temperature, which can be accomplished in the U-10Mo alloy. However, presence of minor alloying elements can influence the final constitution of room-temperature phases in the U10Mo alloy, specifically, formation of α-U phase which results in anisotropic behavior of the fuel in reactor. Further, through a detailed transmission electron microscopy analysis, the present study reports the constituent phases that are present in a U10Mo alloy containing ~0.1 wt% Si after it is subjected to homogenization heat treatment and thermomechanical processing. For comparison, results from an undoped U10Mo alloy are also included. The experimental results reveal that γ-UMo solid solution is the major phase in a hot-rolled, Si-doped U10Mo alloy metallic fuel foil, along with U 2 MoSi 2 C, UC, and U 2 Mo, after isothermal annealing at 460 °C for 10h. In contrast, after the same heat treatment, the undoped U10Mo alloy metallic fuel had formed a noticeable amount of α-U along prior γ-UMo grain boundaries through discontinuous precipitation (DP, area fraction: ~27.9%) with characteristic lamellar morphology, together with γ-UMo, UC, and U 2 Mo. This result indicates that doping with Si could mitigate the DP reaction in U10Mo alloy and prevent formation of undesirable α-U. This work sheds light on optimizing Si-doping–dominated microstructure in U10Mo fuels and facilitates designing and tuning of microstructures of U10Mo alloys for tailoring the final designed performance of the fuel under irradiation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

High resolution microstructural, chemical studies and localized burnup analysis in an irradiated U–10Zr metallic fuel

This study involves high resolution characterization of a sodium bonded solid uranium (U)-10 wt% zirconium (Zr) metallic fuel irradiated in Fast Flux Test Facility (FFTF). The fuel centerline temperature during irradiation was estimated to be around 675 °C with the peak burnup 13.1 atomic percent. Samples for transmission electron microscopy (TEM) and atom probe tomography (APT) were prepared from different regions/zones in the fuel cross section radially to elucidate the microstructural changes and chemical redistribution of solute elements as well as fission products during irradiation experiment. TEM results indicate the irradiation in fast flux testing leads to the formation of extensive Zr-rich precipitates with varying sizes in the U–Zr fuel matrix. APT analysis performed to investigate redistribution of Zr, U and fission products along the radial direction of fuel pin showed Zr-rich precipitates entrapping the fission products in higher concentration as compared to the α-U phases. Here, the local burnup ( 235 U depletion) is found to be consistent, calculated by quantification of 235 U, 236 U and 238 U isotopes from mass spectrum obtained from APT along the radial direction. Zr-rich precipitation and its implication on fuel constitutional redistribution are discussed based on SEM, TEM and APT results.

APT↗
DOE OSTI2022

Understanding Instability in Formamidinium Lead Halide Perovskites: Kinetics of Transformative Reactions at Grain and Subgrain Boundaries

Transformative and reconstructive reactions impart significant structural changes at particle boundaries of hybrid perovskites, which influence environmental stability and optoelectronic properties of these materials. Here, we investigate the moisture-induced transformative reactions in formamidinium based perovskites FAPbX 3 (X=I, Br) and show that the ambient stability of these materials can be adjusted from a few hours to several months. For FAPbI 3 , roles of water vapor, particle size, and light illumination on the kinetic pathways of the cubic (a) transformation to the hexagonal (d) phase are analyzed by X-ray diffraction, optical microscopy, photoluminescence and solid-state NMR spectroscopy techniques. The grain and sub-grain boundaries exhibit different α→δ-FAPbI 3 phase transformation kinetics. Our study suggests that the dynamic transformation involves the local water-induced dissolution of the cubic phase occurring at the crystal surfaces followed by precipitation of the hexagonal phase. Insights into structures and dynamics of a kinetically trapped α-|δ-FAPbI 3 are obtained by 1 H, 2 H, and 207 Pb ssNMR spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Combining solution-, precipitation- and load-transfer strengthening in a cast Al-Ce-Mn- Sc -Zr alloy

Here, a cast Al-9Ce-0.75Mn-0.18Sc-0.12Zr (wt%) alloy is designed to combine three strengthening phases: (i) micron-scale Al 11 Ce 3 platelets formed during eutectic solidification, (ii) nano-scale L1 2 -Al 3 (Sc,Zr) precipitates formed during aging, and (iii) Mn in solid solution in the α-Al matrix. Microstructural analyses by SEM, TEM, and atom-probe tomography reveal that Mn remains in solid solution in the as-cast alloy, providing solution strengthening with no influence on the eutectic Al-Al 11 Ce 3 microstructure, which provides precipitation- and load-transfer strengthening. During long-term over-aging at 400 °C, Mn-rich precipitates grow at the Al-Al 11 Ce 3 interface, with no effect on the microhardness. However, after short aging at 350 °C, a high number density of fine L1 2 -Al 3 (Sc,Zr) nanoprecipitates form in the Al matrix (with a coarser size at the Al-Al 11 Ce 3 interface), providing precipitation strengthening. The synergistic combination of the three strengthening mechanisms (solution, precipitation, and load transfer) in our Al-Ce-Mn-Sc-Zr alloy results in higher microhardness after aging at 350 and 400 °C, and higher creep resistance at 300 °C, as compared to alloys with two strengthening mechanisms: an Al-10Ce-0.93Mn control alloy (without precipitation strengthening from Sc and Zr), Al-Ce-Sc-Zr (without solution strengthening from Mn), and Al-Mn-Zr-Er (without load-transfer strengthening from Ce). Furthermore, these dual-strengthened alloys are more creep resistant than alloys with a single strengthening mechanism (Al-Ce, Al-Mn, and Al-Sc-Zr), confirming that the three mechanisms can be combined in pairs or all together.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Microstructural evolution and precipitation in γ-LiAlO 2 during ion irradiation

Polycrystalline γ-LiAlO 2 pellets were sequentially irradiated with 120 keV He + and 80 keV D 2 + ions to the fluences of 1 × 10 17 and 2 × 10 17 (He + + D + )/cm 2 at 573 K. Additional irradiation was performed to a fluence of 2 × 10 17 (He + + D + )/cm 2 at 773 K. The irradiated pellets were characterized using scanning transmission electron microscopy, time-of-flight secondary ion mass spectrometry, and grazing incidence x-ray diffraction. Lattice damage, amorphization, and fractures are observed with no evidence for the formation of secondary-phase precipitates in the pellets irradiated up to an ion fluence of 2 × 10 17 (He + + D + )/cm 2 at 573 K. In contrast, faceted precipitates with sizes larger than 100 nm formed in a pellet irradiated to 2 × 10 17 (He + + D + )/cm 2 at 773 K. Analyses of the diffraction and composition data suggest that the precipitates have a spinel-type structure, likely a non-stoichiometric LiAl 5 O 8 with Li depletion. This could be an intermediate phase with Li atoms at the octahedral and possibly tetrahedral sites as well. It is speculated that as the dose increases, Li loss will continue and the precipitates will approach a composition of alumina primarily in phases of α-Al 2 O 3 and amorphized Al 2 O 3 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

The Dopamine Assisted Synthesis of MoO3/Carbon Electrodes With Enhanced Capacitance in Aqueous Electrolyte

A capacitance increase phenomenon is observed for MoO 3 electrodes synthesized via a sol-gel process in the presence of dopamine hydrochloride (Dopa HCl) as compared to α-MoO 3 electrodes in 5M ZnCl 2 aqueous electrolyte. The synthesis approach is based on a hydrogen peroxide-initiated sol-gel reaction to which the Dopa HCl is added. The powder precursor (Dopa) x MoO y , is isolated from the metastable gel using freeze-drying. Hydrothermal treatment (HT) of the precursor results in the formation of MoO 3 accompanied by carbonization of the organic molecules; designated as HT-MoO 3 /C. HT of the precipitate formed in the absence of dopamine in the reaction produced α-MoO 3 , which was used as a reference material in this study (α-MoO 3 -ref). Scanning electron microscopy (SEM) images show a nanobelt morphology for both HT-MoO 3 /C and α-MoO 3 -ref powders, but with distinct differences in the shape of the nanobelts. The presence of carbonaceous content in the structure of HT-MoO 3 /C is confirmed by FTIR and Raman spectroscopy measurements. X-ray diffraction (XRD) and Rietveld refinement analysis demonstrate the presence of α-MoO 3 and h-MoO 3 phases in the structure of HT-MoO 3 /C. The increased specific capacitance delivered by the HT-MoO 3 /C electrode as compared to the α-MoO 3 -ref electrode in 5M ZnCl 2 electrolyte in a −0.25–0.70 V vs. Ag/AgCl potential window triggered a more detailed study in an expanded potential window. In the 5M ZnCl 2 electrolyte at a scan rate of 2 mV s −1 , the HT-MoO 3 /C electrode shows a second cycle capacitance of 347.6 F g −1 . The higher electrochemical performance of the HT-MoO 3 /C electrode can be attributed to the presence of carbon in its structure, which can facilitate electron transport. Our study provides a new route for further development of metal oxides for energy storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Trends in Warm Season Mesoscale Convective Systems Over Asia in 2001–2020

Mesoscale convective systems (MCSs) frequently occur over Asia during the warm season, often producing intense precipitation with associated socioeconomic impacts. Here we reveal significant trends in MCS occurrence frequency and related precipitation in Asia during the warm season (March–September) in 2001–2020, using a tracking method that combines cloud and precipitation criteria with high-resolution satellite data from the Global Precipitation Measurement mission. To examine whether there are differences between MCSs of different scales, both meso-α scales (MαCSs) and meso-β scales (MβCSs), with horizontal scales of 200–2,000 km and 20–200 km, are tracked. The distribution pattern of frequency and related precipitation of both MαCSs and MβCSs are quite similar and manifest positive trends over East Asia (EA) and Northeast Asia, and negative trend over Southeast Asia (SEA). The MCS precipitation trend contributes significantly to total precipitation trend, with MαCSs contributing the most. Our analysis indicates the trend in lower-tropospheric water vapor flux convergence has a similar spatial pattern to the MCS frequency and related precipitation trend. Based on an atmospheric moisture flux decomposition analysis, the water vapor flux convergence trend can largely be explained by the change in horizontal wind convergence, while the specific humidity trend driven largely by temperature change plays a minor role. In conclusion, the trend in wind convergence in EA and SEA is possibly related to the evident trend in the lower-tropospheric anticyclone over the western North Pacific and SEA, which might be due to the relatively stronger warming in the Indian Ocean during the past two decades.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Selectivity of Electrochemical Ion Insertion into Manganese Dioxide Polymorphs

The ion insertion redox chemistry of manganese dioxide has diverse applications in energy storage, catalysis, and chemical separations. Unique properties derive from the assembly of Mn–O octahedra into polymorphic structures that can host protons and nonprotonic cations in interstitial sites. Despite many reports on individual ion-polymorph couples, much less is known about the selectivity of electrochemical ion insertion in MnO 2 . In this work, we use density functional theory to holistically compare the electrochemistry of A x MnO 2 (where A = H + , Li + , Na + , K + , Mg 2+ , Ca 2+ , Zn 2+ , Al 3+ ) in aqueous and nonaqueous electrolytes. We develop an efficient computational scheme demonstrating that Hubbard-U correction has a greater impact on calculating accurate redox energetics than choice of exchange-correlation functional. Using PBE+U, we find that for nonprotonic cations, ion selectivity depends on the oxygen coordination environments inside a polymorph. When H + is present, however, the driving force to form hydroxyl bonds is usually stronger. In aqueous electrolytes, only three ion-polymorph pairs are thermodynamically stable within water’s voltage stability window (Na + and K + in α-MnO 2 , and Li + in λ-MnO 2 ), with all other ion insertion being metastable. We find Al 3+ may insert into the δ, R, and λ polymorphs across the full 2-electron redox of MnO 2 at high voltage; however, electrolytes for multivalent ions must be designed to impede the formation of insoluble precipitates and facilitate cation desolvation. We also show that small ions coinsert with water in α-MnO 2 to achieve greater coordination by oxygen, while solvation energies and kinetic effects dictate water coinsertion in δ-MnO 2 . Finally, taken together, these findings explain reports of mixed ion insertion mechanisms in aqueous electrolytes and highlight promising design strategies for safe, high energy density electrochemical energy storage, desalination batteries, and electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Effect of thermal treatments on electrochemical behavior of binder jetted 17-4 PH stainless steel

Binder jetted 17–4 PH stainless steel was post-processed to relate heat treatment, microstructure, and corrosion in 3.5 wt% NaCl. Specimens were sintered at 1380 or 1400 °C, solution-annealed at 1055 °C for 1 h, and aged at 482 °C for 1 h. Here, as-sintered parts showed α′-martensitic matrix with a δ-ferrite network and Cu-rich precipitates in ferrite; inclusions (MnS, NbC) promoted localized attack. solutionizing redistributed elements and reduced ferrite, while aging generated coherent Cu nano-precipitates. Corrosion resistance was highly sensitive to post-processing in which aged specimens exhibited the lowest corrosion current density and formed a thicker, stable Cr 2 O 3 -rich passive film, whereas sintered specimens degraded most. Pitting potential depended on sintering temperature and microstructure, with 1400 °C sintering yielding more positive pitting potentials and the best overall performance after aging. Although the 1400-solutionized condition showed a relatively noble pitting response versus 1380-solutionized, it displayed unstable corrosion kinetics attributed to an imperfect passive film linked to higher NbC density. XPS depth profiles corroborated these trends, showing thicker, more continuous Cr 2 O 3 in aged states and discontinuous/thinning oxides in less resistant conditions. Practically, high-temperature sintering (∼1400 °C) followed by solutionizing and aging is recommended, with further gains expected from reducing NbC/MnS populations and porosity via powder and process control.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anodic Shock-Triggered Exsolution of Metal Nanoparticles from Perovskite Oxide

Nanoparticles decorated electrodes (NDEs) are useful in fuel cells, electrolyzers, water treatment, and chemical synthesis. Here, in this study, we show that by rapidly bringing a mixed ionic-electronic conductor outside its electrochemical stability window, one can achieve uniform dispersion of metallic nanoparticles inside its bulk and at the surface and improve its electrocatalytic performance when back under normal functional conditions. Surprisingly, this can happen under anodic as well as cathodic current/voltage shocks in an ABO 3 perovskite oxide, La 0.4 Ca 0.4 Ti 0.88 Fe 0.06 Ni 0.06 O 3-δ (LCTFN), across a wide range of H 2 /O 2 gas environments at 800 °C. One possible mechanism for bulk Fe 0 /Ni 0 precipitation under anodic shock condition is the incomplete oxygen oxidation (O 2 – → O α– , 0 < α < 2), migration and escape of oxygen to interfaces, and “whiplash” transition-metal reduction due to low electronic conductivity. We show that both cathodic and anodic shocks can produce NDEs to enhance electrocatalytic performance, potentially improving the flexibility of this approach in practical devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Retrospective Analysis and Bayesian Model Averaging of CMIP6 Precipitation in the Nile River Basin

The Nile River basin is one of the global hotspots vulnerable to climate change impacts because of a fast-growing population and geopolitical tensions. Previous studies demonstrated that general circulation models (GCMs) frequently show disagreement in the sign of change in annual precipitation projections. Here, we first evaluate the performance of 20 GCMs from phase six of the Coupled Model Intercomparison Project (CMIP6) benchmarked against a high-spatial-resolution precipitation dataset dating back to 1983 from Precipitation Estimation from Remotely Sensed Information Using Artificial Neural Networks–Climate Data Record (PERSIANN-CDR). Next, a Bayesian model averaging (BMA) approach is adopted to derive probability distributions of precipitation projections in the Nile basin. Retrospective analysis reveals that most GCMs exhibit considerable (up to 64% of mean annual precipitation) and spatially heterogenous bias in simulating annual precipitation. Moreover, it is shown that all GCMs underestimate interannual variability; thus, the ensemble range is underdispersive and is a poor indicator of uncertainty. The projected changes from the BMA model show that the value and sign of change vary considerably across the Nile basin. Specifically, it is found that projected changes in the two headwaters basins, namely, the Blue Nile and Upper White Nile, are 0.03% and -1.65%, respectively; both are statistically insignificant at α = 0.05. The uncertainty range estimated from the BMA model shows that the probability of a precipitation decrease is much higher in the Upper White Nile basin whereas projected change in the Blue Nile is highly uncertain both in magnitude and sign of change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Annealing influence on the microstructure of irradiated U-Mo monolithic fuel foils

In this study we compared the microstructure evolution of U-Mo fuel foils produced with and without heat treatment at low burn-up via advanced post-irradiation examination. The aim of this study is to observe after irradiation the ways in which the fabrication processes have influenced fuel behavior at early-stage irradiation, as for very low burn up microstructural studies are lacking. In this work it was observed that the larger grain size detected in the heat-treated samples before irradiation led to decreased grain refinement after irradiation. Grain refinement was associated with the presence of small nano-size bubbles and precipitates. This phenomenon is hypothesized to influence early fuel swelling during reactor irradiation. Grain refinement was also observed to increase in regions where γ-U decomposition was present. Thus, it was enhanced in the samples fabricated without heat treatment. The heat treatment also increased the thickness of the U-Mo/Zr interface, namely of the UZr 2 layer. However, the influence of this layer on fuel performance needs further investigation. On one side, it may contribute to better mechanical bonding; on the other, it may influence swelling and blistering in the interaction layer as porosity increases when this layer is increased. This was observed especially in the presence of increased area containing low Mo concentration, and thus containing a higher fraction of the α-U phase, which is highly susceptible to irradiation induced swelling. Strong evidence of reverse transformation under irradiation (α-U + γ'-U2Mo → bcc γ-U) was observed in these samples. While the precipitates (carbides and oxide) seem to be unaffected by the irradiation at these low burnups. However, further analyses are necessary at higher burn-up to assess the exact impact different heat treatments have on fuel performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

High-temperature lean Cu alloys with Cr-to-Nb atomic ratio of 2

Two Cu-Cr-Nb alloys, denoted as alloy 1 (comprising Cu-0.89 at% Cr-0.42 at% Nb) and alloy 2 (comprising Cu-1.84 at% Cr-0.99 at% Nb), were produced through a series of manufacturing processes including vacuum induction melting, melt spinning, consolidation, brazing, and baking, with both alloys aimed at achieving a nominal Cr-to-Nb atomic ratio of 2. Microstructural characterization using transmission electron microscopy and X-ray diffraction identified the cubic C15 Laves-phase Cr 2 Nb as the dominant precipitate in both alloys, cross-validated by thermodynamic calculations and atomistic simulation-based density functional theory (DFT). Besides cubic C15 Cr 2 Nb, hexagonal C14-phase Cr 2 Nb and α-BiF3 cubic structured Cr 3 Nb were also observed in the alloys, including a coherent interface formed between the Cr 3 Nb precipitate and the Cu matrix. The hardness of the alloys increases, and the electrical conductivity decreases with increasing alloying addition content; two practical equations described the trends. Further DFT simulations revealed that the electrical conductivity (conductance) of the Cu/Cr 2 Nb interface is an order of magnitude higher than the intrinsic Cu high-angle grain boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Local chemical ordering of a neutron-irradiated CrFeMnNi compositionally complex alloy

While ion-irradiation studies are a critical first step in studying compositionally complex alloys (CCAs) for nuclear applications, they do not capture all the microstructural changes occurring under the low irradiation dose rates and different particles’ scattering patterns experienced in a nuclear reactor setting. To explore these phenomena in reactor-relevant conditions for the first time in CCA, the single-phase solid-solution Cr 10 Fe 30 Mn 30 Ni 30 was neutron irradiated up to 6.61 displacements per atom at 395 and 579 °C. Irradiation-enhanced local chemical ordering (LCO) well beyond the range of short range ordering was observed, and is predicted to be the precursor to the precipitation of a coherent Ni-Mn L1 0 phase and a Cr-rich α’ phase, though TEM analysis did not indicate the presence of either in any irradiation condition. The line density of faulted dislocation loops decreased from 6.47 to 1.69 ∙ 10 15 m -2 from 3.43 to 6.61 dpa at 579 °C despite no appreciable faulted loop content in the unirradiated material. LCO is expected to increase the complexity of the energy landscape within this alloy, restricting interstitial point defect mobility and creating local regions of greater stacking fault energy. These contribute to the negative correlation between irradiation dose and faulted dislocation loop density in this study, as well as the lack of void swelling observed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Laser powder bed fusion of ODS Fe–Cr–Al (0.3Zr, 0.3Y 2 O 3 ): Unveiling processing-microstructure- mechanical property relationships

Here, this study investigates the fabrication of oxide dispersion strengthened (ODS) Fe-Cr-Al alloys via laser powder bed fusion (LPBF) with strategic additions of 0.3 wt% Zr and 0.3 wt% Y 2 O 3 for enhanced mechanical performance in nuclear applications. Systematic processing parameter optimization yielded three distinct conditions: one low-density product with significant defects and two near-full-density materials with improved consolidation. Comprehensive characterization confirmed single-phase α-ferrite matrix formation with successful incorporation of Y-, Zr-, O-, and C-rich precipitates characteristic of ODS alloys. However, precipitate density remained low (∼10 7 cm −3 ), resulting in sink strength values substantially below optimal levels for radiation resistance. Microhardness values (mid-200s HV) correlated inversely with grain size following the Hall-Petch relationship, indicating grain boundary strengthening as the dominant mechanism rather than precipitation strengthening. The optimized processing conditions achieved excellent mechanical properties with room temperature yield strength of approximately 500 MPa and 30 % elongation, demonstrating superior strength-ductility synergy compared to other additively manufactured ODS materials and performance consistent with literature values for LPBF-processed ODS-FeCrAl alloys. This investigation reveals both the potential and limitations of LPBF processing for ODS Fe-Cr-Al alloys. While successful defect-free fabrication was achieved, results highlight the critical need for systematic optimization of processing parameters and post-processing heat treatments to enhance precipitate density for effective dispersion strengthening and radiation resistance while maintaining additive manufacturing advantages.

Additive manufacturing↗
DOE OSTI2020

Orientation and morphology of Pt nanoparticles in γ-alumina processed via ion implantation and thermal annealing

Structure and chemistry of metal/metal-oxide interfaces are critical for many catalytic processes and sensing. Pristine interfaces of Pt and γ-Al 2 O 3 were fabricated using high-energy ion implantation and thermal processing. Amorphous regions of alumina develop in single crystal α-alumina during Pt+ implantation and an 800 °C thermal treatment crystalizes amorphized alumina to γ-Al 2 O 3 and allows Pt ions to precipitate within the developing γ-alumina, yielding Pt nanoparticle tetrahedra terminated by {111} surfaces. The phase of alumina that developed and the distribution, morphology, and orientation of Pt nanoparticles was determined using x-ray diffraction, Rutherford backscattering spectrometry, transmission electron microscopy and scanning transmission electron microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tensile behavior of dual-phase titanium alloys under high-intensity proton beam exposure: radiation-induced omega phase transformation in Ti-6Al-4V

A high-intensity proton beam exposure with 181 MeV energy has been conducted at Brookhaven Linac Isotope Producer facility on various material specimens for accelerator targetry applications, including titanium alloys as a beam window material. The radiation damage level of the analyzed capsule was 0.25 dpa at the beam center region with an irradiation temperature around 120 oC. Tensile tests showed increased hardness and a large decrease in ductility for the dual a+ß-phase Ti-6Al-4V Grade-5 and Grade-23 extra low interstitial alloys, with the near a-phase Ti-3Al-2.5V Grade-9 alloy still exhibiting uniform elongation of a few % after irradiation. Transmission Electron Microscope analyses on Ti-6Al-4V indicated clear evidence of a high-density of defect clusters with size less than 2 nm in each a-phase grain. The ß-phase grains did not contain any visible defects such as loops or black dots, while the diffraction patterns clearly indicated ?-phase precipitation in an advanced formation stage. The radiation-induced ?-phase transformation in the ß-phase could lead to greater loss of ductility in Ti-6Al-4V alloys in comparison with Ti-3Al-2.5V alloy with less ß-phase.google scho

Tensile Test, titanium, acclerator, proton beam↗