Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accelerator Control C#”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Radiation Safety System

The goal of this work is to provide an overview of a Radiation safety system (RSS) designed for protection from prompt radiation hazard at accelerator facilities. RSS design parameters, functional requirements and constraints are derived from hazard analysis and risk assessment undertaken in the design phase of the facility. The two main subsystems of a RSS are access control system (ACS) and radiation control system (RCS). In this text, a common approach to risk assessment, typical components of ACS and RCS, desirable features and general design principles applied to RSS are described.

43 PARTICLE ACCELERATORS↗

CBETA Design Report

This Design Report describes the baseline design of the Cornell-BNL ERL Test Accelerator, as it exists on the date of its publication in June 2017. The Design Report will not change frequently in the future. In contrast, the parameter sheets that summarize the CBETA design will respond as quickly and as thoroughly as necessary to maintain con guration control.

43 PARTICLE ACCELERATORS↗

The Stanford Automated Mounter: Enabling High-Throughput Protein Crystal Screening at SSRL

The macromolecular crystallography experiment lends itself perfectly to high-throughput technologies. The initial steps including the expression, purification, and crystallization of protein crystals, along with some of the later steps involving data processing and structure determination have all been automated to the point where some of the last remaining bottlenecks in the process have been crystal mounting, crystal screening, and data collection. At the Stanford Synchrotron Radiation Laboratory, a National User Facility that provides extremely brilliant X-ray photon beams for use in materials science, environmental science, and structural biology research, the incorporation of advanced robotics has enabled crystals to be screened in a true high-throughput fashion, thus dramatically accelerating the final steps. Up to 288 frozen crystals can be mounted by the beamline robot (the Stanford Auto-Mounting System) and screened for diffraction quality in a matter of hours without intervention. The best quality crystals can then be remounted for the collection of complete X-ray diffraction data sets. Furthermore, the entire screening and data collection experiment can be controlled from the experimenter's home laboratory by means of advanced software tools that enable network-based control of the highly automated beamlines.

36 MATERIALS SCIENCE↗

Improvements in dose accuracy delivered with static-MLC IMRT on an integrated linear accelerator control system

Purpose: Dose accuracy has been shown to vary with dose per segment and dose rate when delivered with static multileaf collimator (SMLC) intensity modulated radiation therapy (IMRT) by Varian C-series MLC controllers. The authors investigated the impact of monitor units (MUs) per segment and dose rate on the dose delivery accuracy of SMLC-IMRT fields on a Varian TrueBeam linear accelerator (LINAC), which delivers dose and manages motion of all components using a single integrated controller. Methods: An SMLC sequence was created consisting of ten identical 10 x 10 cm{sup 2} segments with identical MUs. Beam holding between segments was achieved by moving one out-of-field MLC leaf pair. Measurements were repeated for various combinations of MU/segment ranging from 1 to 40 and dose rates of 100-600 MU/min for a 6 MV photon beam (6X) and dose rates of 800-2400 MU/min for a 10 MV flattening-filter free photon (10XFFF) beam. All measurements were made with a Farmer (0.6 cm{sup 3}) ionization chamber placed at the isocenter in a solid-water phantom at 10 cm depth. The measurements were performed on two Varian LINACs: C-series Trilogy and TrueBeam. Each sequence was delivered three times and the dose readings for the corresponding segments were averaged. The effects of MU/segment, dose rate, and LINAC type on the relative dose variation ({Delta}{sub i}) were compared using F-tests ({alpha} = 0.05). Results: On the Trilogy, large {Delta}{sub i} was observed in small MU segments: at 1 MU/segment, the maximum {Delta}{sub i} was 10.1% and 57.9% at 100 MU/min and 600 MU/min, respectively. Also, the first segment of each sequence consistently overshot ({Delta}{sub i} > 0), while the last segment consistently undershot ({Delta}{sub i} < 0). On the TrueBeam, at 1 MU/segment, {Delta}{sub i} ranged from 3.0% to 4.5% at 100 and 600 MU/min; no obvious overshoot/undershoot trend was observed. F-tests showed statistically significant difference [(1 - {beta}) =1.0000] between the Trilogy and the TrueBeam up to 10 MU/segment, at all dose rates greater than 100 MU/min. The linear trend of decreasing dose accuracy as a function of increasing dose rate on the Trilogy is no longer apparent on TrueBeam, even for dose rates as high as 2400 MU/min. Dose inaccuracy averaged over all ten segments in each beam delivery sequence was larger for Trilogy than TrueBeam, with the largest discrepancy (0.2% vs 3%) occurring for 1 MU/segment beams at both 300 and 600 MU/min. Conclusions: Earlier generations of Varian LINACs exhibited large dose variations for small MU segments in SMLC-IMRT delivery. Our results confirmed these findings. The dose delivery accuracy for SMLC-IMRT is significantly improved on TrueBeam compared to Trilogy for every combination of low MU/segment (1-10) and high dose rate (200-600 MU/min), in part due to the faster sampling rate (100 vs 20 Hz) and enhanced electronic integration of the MLC controller with the LINAC. SMLC-IMRT can be implemented on TrueBeam with higher dose accuracy per beam ({+-}0.2% vs {+-}3%) than previous generations of Varian C-series LINACs for 1 MU/segment delivered at 600 MU/min).

61 RADIATION PROTECTION AND DOSIMETRY↗

A robust and stable PLC based control system for 40kJ/25kV EMM system

This paper describes the PLC based control system developed for a 40kJ/25kV Electro-magnetic machining (EMM) system. In EMM system large capacitor banks is charged with high voltage to store large energy and the banks is made to discharge into a coil within few milli-seconds using a triggered spark gaps. During discharge of the capacitor large surges and transients are generated in the system. The control system monitors/controls and interlocks all the units of the system for proper operation. The control system is the only subsystem which is electrically connected to all the low and high voltage subsystems. Care should be taken at the signal interfacing with the control system to protect the control system. (author)

43 PARTICLE ACCELERATORS↗

Determination of Energy and Fluences of Protons Collectively Accelerated in a Luce Diode Accelerator

Plates of boron carbide B{sub 4}C were used as refractory targets for determination of energy and fluences of protons collectively accelerated in a Luce diode accelerator by control of {sup 7}Be and {sup 13}N gamma radioactivity induced by nuclear reactions {sup 10}B(p, α){sup 7}Be and {sup 12}C(p, γ){sup 13}N, respectively. The Luce diode exploited a cylindrical tungsten rod as a cathode and a polyethylene washer as an anode, producing pulsed electron beams with durations and currents of up to 100 ns and 30 kA at voltages of 250 kV. The technique allows controlling proton energies within the range of 500–1500 keV and fluences of up to 5 × 10{sup 13} protons per cm{sup 2} per pulse.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mechanical and Chemical Properties of Harvested Hypalon Cable Jacket Subjected to Accelerated Thermal Aging

For nuclear power plants (NPPs) that are considering second license renewal for their operation beyond 60 years, knowledge of long-term operation, condition monitoring, and viability for the reactor components including reactor pressure vessel, concrete structures, and cable systems is essential. Such knowledge will provide NPPs with a game plan to predict performance and to estimate costs that are associated with monitoring or replacement programs for the affected systems. For cable systems that encompass a wide variety of materials, manufacturers, and in-plant location, accelerated aging of harvested cable jacket and insulation can provide insight as to remaining useful life and methods for monitoring. Accelerated thermal aging in air at temperatures between 80°C and 120°C was carried out on a multi-conductor control rod cable that had been in-service for over 30 years and was made by Boston Insulated Wire with Hypalon cable jacket and ethylene-propylene rubber insulation. From elongation at break (EAB) measurements and supporting Arrhenius analysis of the jacket material, an activation energy of 97.84 kJ/mol was estimated and the time to degradation, as represented by 50% EAB at the expected maximum operating temperature of 45°C, was estimated as consistent with 80 years. These values were slightly below previous measurements and could either be attributed to in-service degradation or variations in material properties from a given manufacturer. In addition, results from indenter modulus measurements and Fourier transform infrared spectroscopy suggest possible markers that could be beneficial to monitor cable conditions.

cable aging, cable insulation, Hypalon, second lic↗

A high-throughput workflow to analyze sequence-conformation relationships and explore hydrophobic patterning in disordered peptoids

Understanding how a macromolecule’s primary sequence governs its conformational landscape is crucial for elucidating its function, yet these design principles are still emerging for macromolecules with intrinsic disorder. Herein, we introduce a high-throughput workflow that implements a practical colorimetric conformational assay, introduces a semi-automated sequencing protocol using matrix-assisted laser desorption/ionization and tandem mass spectrometry (MALDI-MS/MS), and develops a generalizable sequence-structure algorithm. Using a model system of 20mer peptidomimetics containing polar glycine and hydrophobic N-butylglycine residues, we identified nine classifications of conformational disorder and isolated 122 unique sequences across varied compositions and conformations. Conformational distributions of three compositionally identical library sequences were corroborated through atomistic simulations and ion mobility spectrometry coupled with liquid chromatography. A data-driven strategy was developed using existing sequence variables and data-derived “motifs” to inform a machine-learning algorithm toward conformation prediction. Here, this multifaceted approach enhances our understanding of sequence-conformation relationships and offers a powerful tool for accelerating the discovery of materials with conformational control.

data-driven analysis↗

Compatibility of Type 304H Stainless Steel in Static Molten FLiBe for Inertial Confinement Fusion Reactors: Role of Impurities and Redox Control

Molten fluoride salts, such as FLiBe (LiF-BeF2), are promising candidates for tritium breeding and heat transfer in fusion reactors, but corrosion of structural materials remains a major challenge. This study investigates the corrosion behavior of austenitic stainless steel 304H in purified and NiF2-containing FLiBe at 500°C and 600°C, focusing on the effects of impurities and redox control. Exposure to purified FLiBe resulted in the concurrent depletion of Cr, Mn, and Fe, with corrosion at 500 °C dominated by the combined oxide formation and elemental dissolution, while at 600°C elemental depletion was predominant. The addition of a controlled NiF2 impurity significantly accelerated corrosion at both temperatures, demonstrating the sensitivity of 304H to the salt redox state. Beryllium additions were effective in mitigating corrosion for both baseline and NiF2-containing FLiBe; minimal depletion of Cr, Mn, and Fe occurred with Be additions as low as 2.5 mg (147 wppm), and no NiBe intermetallics formed at 5 mg (294 wppm), indicating that small Be inventories can provide substantial protection without deleterious phase formation. Thermodynamic equilibrium and coupled thermodynamic-kinetic analyses at the salt-alloy interface suggested low corrosion rates in systems with limited hydrogen fluoride (HF) generation, highlighting the importance of salt redox control. Estimates for a Be addition rate were calculated for the HYLIFE-II fusion reactor that can mitigate corrosion-induced degradation, assuming complete conversion of tritium to tritium fluoride (TF). Overall, 304H shows reasonable compatibility with FLiBe under optimized redox conditions. These results provide quantitative guidance for material selection and salt management in fusion blanket and heat exchanger systems and motivate validation under flowing, nonisothermal, and irradiated conditions.

Pillai, Rishi [ORNL] (ORCID:0000000243688197)↗

Criticality in the Shallow-to-Deep Transition of Simulated Tropical Marine Convection

Idealized simulations of tropical, marine convection depict shallow, nonprecipitating cumuli located beneath the 0°C level transitioning into cumulonimbi that reach up to 12 km and higher. The timing of the transition was only weakly related to environmental stability, and 13 of the 15 simulations run with 5 different lapse-rate profiles had rain develop at nearly the same time after model start. The key quantity that apparently controlled deep convective formation was vertical acceleration inside cloudy updrafts between cloud base and the 0°C level. Below a critical value of updraft vertical acceleration, little rainfall occurred. Just as the domain-mean updraft acceleration reached the critical value, the first convection quickly grew to past 12 km altitude. Then, as acceleration increased above the critical value, rain rate averaged in the model domain increased quickly over about a 3-h-long period. The specific value of the critical updraft acceleration depended on how updrafts were defined and in what layer the acceleration was averaged; however, regardless of how criticality was defined, a robust relationship between domain-mean updraft vertical acceleration and rain rate occurred. Positive acceleration of updrafts below the 0°C level was present below 2.75 km and was largest in the 500 m above cloud base. However, the maximum difference between updraft and environmental temperatures occurred between 2 and 3 km. The domain-mean Archimedean buoyancy of updrafts relative to some reference state was a poor predictor for domain-mean rain rate. In conclusion, the exact value of the critical updraft acceleration likely depends on numerous other factors that were not investigated.

54 ENVIRONMENTAL SCIENCES↗

Structures: Propulsion interactions and requirements

The dynamics of the interaction of space structures and their propellant systems are outlined. Optimization for a platform type of space structure is discussed. Static and transient loads, propellant accelerations, tolerances, attitude control, and distributed thrust are considered.

Pengelley, C. D.↗

Multi-scale observations of structure and chemical composition changes of portland cement systems during hydration

There is little agreement about the mechanisms and few direct observations of the transition of cement paste from a slurry to a solid. This paper uses four different imaging techniques at multiple length scales (from 15.6 nm to 1 μm) to follow the three-dimensional microstructural evolution of portland cement, and monoclinic tricalcium silicate (mC 3 S) paste over the first 16 h of hydration. Measurements of over 60,000 particles captured every 10 min were made at the micron scale. Nanoscale examinations of the structure and chemical composition are used to support this work. The results show that hydration products with an average Ca/Si > 3 form on and near the surface of the hydrating particles prior to the acceleration period that appears to control the reaction rate. These hydration products appear to change in chemical composition as more rapid dissolution of C 3 S and formation of hydration products occur during the acceleration period. The findings are used to provide insights into the origin of the induction and acceleration periods during hydration.

36 MATERIALS SCIENCE↗

Coolant Compatibility Studies for Fusion and Fusion-Fission Hybrid Reactor Concepts: Corrosion of Oxide Dispersion Strengthened Iron-Chromium Steels and Tantalum in High Temperature Molten Fluoride Salts

Alloys such as 12YWT & 14YWT have exceptional high-temperature strength at temperatures greater than 550 C. This class of materials has also demonstrated relatively little radiation induced swelling at damage levels of at least 75 dpa in sodium-cooled fast reactors. However, corrosion of oxide dispersion strengthened (ODS) steels in high temperature molten fluoride salts may limit the life of advanced reactor systems, including some fusion and fusionfission hybrid systems that are now under consideration. This paper reports corrosion studies of ODS steel in molten fluoride salts at temperatures ranging from 600 to 900 C. Electrochemical impedance spectroscopy (EIS) was used to measure the temperature dependence of charge transfer kinetics in situ, while an environmental electron microscope (ESEM) equipped with energy dispersive spectroscopy (EDS) was used for postexposure examination of test samples. ODS steel experienced corrosion in the molten fluoride salts at 550 to 900 C, even in carefully controlled glove-box environments with very low levels of oxygen and moisture. The observed rate of attack was found to accelerate dramatically at temperatures above 800 C. Tantalum and tantalum-based alloys such as Ta-1W and Ta-10W have exceptional high temperature strength, far better than ODS steels. Unlike ODS steels, tantalum has been found to exhibit some immunity to corrosive attack by molten fluoride salts at temperatures as high as 900 C, though there is some indication that grain boundary attack may have occurred. Unfortunately, tantalum alloys are known to become brittle during irradiation and exposure to hydrogen, both of which are important in fusion applications.

36 MATERIALS SCIENCE↗

Dosimetric experience with 2 commercially available multilumen balloon-based brachytherapy to deliver accelerated partial-breast irradiation

The purpose of this work was to report dosimetric experience with 2 kinds of multilumen balloon (MLB), 5-lumen Contura MLB (C-MLB) and 4-lumen MammoSite MLB (MS-MLB), to deliver accelerated partial-breast irradiation, and compare the ability to achieve target coverage and control skin and rib doses between 2 groups of patients treated with C-MLB and MS-MLB brachytherapy. C-MLB has 5 lumens, the 4 equal-spaced peripheral lumens are 5 mm away from the central lumen. MS-MLB has 4 lumens, the 3 equal-spaced peripheral lumens are 3 mm away from the central lumen. In total, 43 patients were treated, 23 with C-MLB, and 20 with MS-MLB. For C-MLB group, 8 patients were treated with a skin spacing < 7 mm and 12 patients with rib spacing < 7 mm. For MS-MLB group, 2 patients were treated with a skin spacing < 7 mm and 5 patients with rib spacing < 7 mm. The dosimetric goals were (1) ≥ 95% of the prescription dose (PD) covering ≥ 95% of the target volume (V{sub 95%} ≥ 95%), (2) maximum skin dose ≤ 125% of the PD, (3) maximum rib dose ≤ 145% of the PD (if possible), and (4) the V{sub 150%} ≤ 50 cm{sup 3} and V{sub 200%} ≤ 10 cm{sup 3}. All dosimetric criteria were met concurrently in 82.6% of C-MLB patients, in 80.0% of MS-MLB patients, and in 81.4% of all 43 patients. For each dosimetric parameter, t-test of these 2 groups showed p > 0.05. Although the geometric design of C-MLB is different from that of MS-MLB, both applicators have the ability to shape the dose distribution and to provide good target coverage, while limiting the dose to skin and rib. No significant difference was observed between the 2 patient groups in terms of target dose coverage and dose to organs at risk.

61 RADIATION PROTECTION AND DOSIMETRY↗

Arbuscular mycorrhizal trees cause a higher carbon to nitrogen ratio of soil organic matter decomposition via rhizosphere priming than ectomycorrhizal trees

Tree roots and their associated microbes can significantly influence soil organic matter (SOM) decomposition, i.e., the rhizosphere priming effect. This effect is expected to be greater in trees associated with arbuscular mycorrhizal (AM) fungi, which produce higher extracellular enzymes especially surrounding hyphae, than in trees associated with ectomycorrhizal (ECM) fungi. In this work, we selected five tree species associated with AM (Juglans mandshurica Maxim. and Cunninghamia lanceolata (Lamb.) Hook.) or ECM (Picea koraiensis Nakai, Quercus mongolica Fischer ex Turcz. and Larix kaempferi (Lamb.) Carriere). We grew tree seedlings inside of cores lined with different mesh sizes to investigate how roots, hyphae and exudates influence soil carbon (C) and nitrogen (N) mineralization via the rhizosphere priming effect, using a 13 C natural abundance approach and a 15 N pool dilution method, concurrently. We found that tree seedlings significantly accelerated soil C decomposition by on average 78%, i.e., positive priming, compared to unplanted control pots. AM-associated trees induced 2.1 times greater soil C decomposition than ECM-associated trees across all mesh sizes. In contrast, gross N mineralization did not differ between tree-mycorrhizal associations. Compared to ECM counterparts, AM-associated trees had higher C- and lower N-degrading enzyme activities. Consequently, AM-associated trees induced a significantly higher C:N ratio of SOM decomposition than their ECM counterparts, which could be associated with the differences in soil enzyme activities for C and N degradation. Further, for both AM- and ECM-associated trees, we found no significant influences of mesh size on soil C decomposition, suggesting that the rhizosphere priming effect of mycorrhizal symbiosis was predominantly driven by root exudates. We conclude that SOM decomposition caused by AM-associated trees may have a higher C:N ratio than that by ECM-associated trees mainly due to differences in microbial enzyme investment. Our findings imply that tree-mycorrhizal associations are capable of modulating soil biogeochemical cycling via the rhizosphere priming effect.

54 ENVIRONMENTAL SCIENCES↗

Photodegradation accelerates ecosystem N cycling in a simulated California grassland

Abstract Photodegradation accelerates litter decay in arid grasslands where plant growth and litter decay are strongly controlled by precipitation and evapotranspiration. However, the effects of photodegradation on ecosystem C and N dynamics are not well understood. We examined the effects using an ecosystem biogeochemical model DayCent‐ UV with photodegradation explicitly represented and validated. The model was parameterized for a California grassland where photodegradation was documented to release CO 2 from litter. The model was parameterized with an inverse modeling approach using an extensive data set of six years of daily observed carbon and water gas exchange (gross primary production, ecosystem respiration, and evapotranspiration), soil temperature, and soil moisture. DayCent‐ UV correctly simulated the seasonal patterns of the observed gas exchange and closely simulated the inter‐annual variation in the gas exchange and biomass production rates. The simulations suggested that the inter‐annual variation is driven more by actual evapotranspiration than by precipitation because a large portion of precipitation is lost as runoff during wet years. Photodegradation in DayCent‐ UV accelerated C and N cycling, decreasing system C and N by 9.2% and 9.5% and C and N residence times by 9.4% and 18.2%. Accelerated N cycling made a greater fraction of system N available for plants, increasing net N mineralization and plant production for a given amount of system N. Increased net N mineralization was due to decreased immobilization by microbes in the aboveground organic matter. Photodegradation did not alter the control on plant production by evapotranspiration. These results suggest that at the ecosystem level, the central effect of photodegradation is to suppress microbial activity. We conclude that photodegradation accelerates N cycling at the expense of microbes in this grassland, making it more efficient in supporting plant growth for a given amount of N in the system.

54 ENVIRONMENTAL SCIENCES↗