Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMMAND CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Command and control of unmanned scientific spacecraft

Recent developments in command and control technology for use with the Voyager and the planned Galileo are discussed. These spacecraft each carry more than 10 scientific instruments, many of which are very complex, and these instruments must be able to function with a considerable degree of autonomy because the round-trip light time to the spacecraft in the vicinity of Jupiter and Saturn is too great to permit prompt ground-based management of onboard anomalies or control of some observation programs. Command and control procedures, including data storage procedures, for systems of the two spacecraft are examined.

Gates, C. R.↗
NASA NTRS2005

Step 1: Human System Integration Simulation and Flight Test Progress Report

The Access 5 Human Systems Integration Work Package produced simulation and flight demonstration planning products for use throughout the program. These included: Test Objectives for Command, Control, Communications; Pilot Questionnaire for Command, Control, Communications; Air Traffic Controller Questionnaire for Command, Control, Communications; Test Objectives for Collision Avoidance; Pilot Questionnaire for Collision Avoidance; Plans for Unmanned Aircraft Systems Control Station Simulations Flight Requirements for the Airspace Operations Demonstration

Source record↗
NASA NTRS1981

Modeling the data systems role of the scientist (for the NEEDS Command and Control Task)

Research was conducted into the command and control activities of the scientists for five space missions: International Ultraviolet Explorer, Solar Maximum Mission, International Sun-Earth Explorer, High-Energy Astronomy Observatory 1, and Atmospheric Explorer 5. A basis for developing a generalized description of the scientists' activities was obtained. Because of this characteristic, it was decided that a series of flowcharts would be used. This set of flowcharts constitutes a model of the scientists' activities within the total data system. The model was developed through three levels of detail. The first is general and provides a conceptual framework for discussing the system. The second identifies major functions and should provide a fundamental understanding of the scientists' command and control activities. The third level expands the major functions into a more detailed description.

Hei, D. J., Jr.↗
NASA NTRS1994

An intelligent automated command and control system for spacecraft mission operations

The Intelligent Command and Control (ICC) System research project is intended to provide the technology base necessary for producing an intelligent automated command and control (C&C) system capable of performing all the ground control C&C functions currently performed by Mission Operations Center (MOC) project Flight Operations Team (FOT). The ICC research accomplishments to date, details of the ICC, and the planned outcome of the ICC research, mentioned above, are discussed in detail.

Stoffel, A. William↗
NASA NTRS1994

Spacecraft command and control using expert systems

This paper describes a product called the Intelligent Mission Toolkit (IMT), which was created to meet the changing demands of the spacecraft command and control market. IMT is a command and control system built upon an expert system. Its primary functions are to send commands to the spacecraft and process telemetry data received from the spacecraft. It also controls the ground equipment used to support the system, such as encryption gear, and telemetry front-end equipment. Add-on modules allow IMT to control antennas and antenna interface equipment. The design philosophy for IMT is to utilize available commercial products wherever possible. IMT utilizes Gensym's G2 Real-time Expert System as the core of the system. G2 is responsible for overall system control, spacecraft commanding control, and spacecraft telemetry analysis and display. Other commercial products incorporated into IMT include the SYBASE relational database management system and Loral Test and Integration Systems' System 500 for telemetry front-end processing.

Norcross, Scott↗
NASA NTRS2019

Command and Control System Automated Testing

The Kennedy Space Center (KSC) has developed its own Command and Control System for the launch of the Space Launch System (SLS) and Orion capsule. The Command and Control System (CCS) is used by console engineers for the launch and system checkout of aerospace vehicles. The CCS allows console engineers to read data from the flight hardware on the launch pad and from the ground control systems and allows console engineers to issue commands, like opening a valve, to the flight hardware and ground control systems. The CCS needs to interact with thousands of devices and hardware controllers for the spacecraft and ground systems, receive data from these devices, distribute the data to console engineers in real-time, and allow console engineers to issue commands to manipulate hardware on the launch pad. The system needs to be robust, fault tolerant, responsive, and fast. In order to keep up with the pace of development of the CCS, a Test Automation System (TAS) is needed to validate the integrity of the system as a whole along with its individual components. Automated tests allow for faster development time, since tests can be ran through a Continuous Integration system and allow developers to check their code faster. Currently, the different modules, classes, and functions that make up the CCS are tested at the unit level, and the system level, with all the modules working together. My project was to implement a system for the data protocol layer of the Command Control System to be tested as a complete functional unit, with all of its classes and functions working together, but independent of the other modules of the CCS.

Automated TestingTest Automation↗
NASA NTRS2001

The Integration of COTS/GOTS within NASA's HST Command and Control System

NASA's mission critical Hubble Space Telescope (HST) command and control system has been re-engineered with COTS/GOTS and minimal custom code. This paper focuses on the design of this new HST Control Center System (CCS) and the lessons learned throughout its development. CCS currently utilizes 31 COTS/GOTS products with an additional 12 million lines of custom glueware code; the new CCS exceeds the capabilities of the original system while significantly reducing the lines of custom code by more than 50%. The lifecycle of COTS/GOTS products will be examined including the pack-age selection process, evaluation process, and integration process. The advantages, disadvantages, issues, concerns, and lessons teamed for integrating COTS/GOTS into the NASA's mission critical HST CCS will be examined in detail. Command and control systems designed with traditional custom code development efforts will be compared with command and control systems designed with new development techniques relying heavily on COTS/COTS integration. This paper will reveal the many hidden costs of COTS/GOTS solutions when compared to traditional custom code development efforts; this paper will show the high cost of COTS/GOTS solutions including training expenses, consulting fees, and long-term maintenance expenses.

Pfarr, Thomas↗
NASA NTRS2017

Spaceport Command and Control System Automated Testing

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administrations (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires high quality testing that will properly measure the capabilities of the system. Automating the test procedures would save the project time and money. Therefore, the Electrical Engineering Division at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

LCS↗
NASA NTRS2017

Spaceport Command and Control System Software Development

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administration's (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires a large amount of intensive testing that will properly measure the capabilities of the system. Automating the test procedures would save the project money from human labor costs, as well as making the testing process more efficient. Therefore, the Exploration Systems Division (formerly the Electrical Engineering Division) at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

Glasser, Abraham↗
NASA NTRS2017

Spaceport Command and Control System Automation Testing

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administrations (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires high quality testing that will properly measure the capabilities of the system. Automating the test procedures would save the project time and money. Therefore, the Electrical Engineering Division at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

Testing↗
NASA NTRS2018

Spaceport Command and Control System: Network Engineering

The Spaceport Command and Control System (SCCS) project's goal is to facilitate the checkout and launch of NASA's next generation SLS vehicle in order to enable human exploration through deep space. SCCS is made up of complex software that will control and monitor the Space Launch System rocket and Orion spacecraft. Once it is fully developed, SCCS will be a large improvement to previous software since it takes advantage of modern computers and information making it faster and more reliable than the software used previously on the Shuttle program. The software will be tailored to the specific needs of the Space Launch System (SLS) and Orion spacecraft. These three projects will be brought together for the launch of Exploration Mission-1.

Mackh, Katherine↗
NASA NTRS1975

Distribution of control decisions in remote manipulation

The particular characteristics of the problem of distributing control decisions between man and computer in remotely controlled manipulation are discussed. State of the art is reviewed from two viewpoints: (1) specifications of both control commands and control context of sensor signals the operator inputs to the manipulator control computer; (2) operations the manipulator control computer performs on operator commands and realtime sensor signals to control the manipulator for a specified task. JPL breadboard systems, system components, and control experiments are described related to the development and evaluation of manipulator control systems with capabilities of distributing control decisions between man and computer.

Bejczy, A. K.↗
NASA NTRS2018

Unit Testing for Command and Control Systems

Unit tests were created to evaluate the functionality of a Data Generation and Publication tool for a command and control system. These unit tests are developed to constantly evaluate the tool and ensure it functions properly as the command and control system grows in size and scope. Unit tests are a crucial part of testing any software project and are especially instrumental in the development of a command and control system. They save resources, time and costs associated with testing, and catch issues before they become increasingly difficult and costly. The unit tests produced for the Data Generation and Publication tool to be used in a command and control system assure the users and stakeholders of its functionality and offer assurances which are vital in the launching of spacecraft safely.

testing↗
NASA NTRS1991

Dynamic attitude command and control of the TOPEX/Poseidon spacecraft

The dynamic control laws utilized by the TOPEX/Poseidon (T/P) spacecraft attitude determination and control subsystem to command and maneuver the satellite during normal mission mode (NMM) laws are described. Results show that the vehicle is able to respond to the dynamic attitude commands while at the same time providing ample disturbance rejection capability.

Zimbelman, D. F.↗
NASA NTRS2005

Reconfigurable data path processor

A reconfigurable data path processor comprises a plurality of independent processing elements. Each of the processing elements advantageously comprising an identical architecture. Each processing element comprises a plurality of data processing means for generating a potential output. Each processor is also capable of through-putting an input as a potential output with little or no processing. Each processing element comprises a conditional multiplexer having a first conditional multiplexer input, a second conditional multiplexer input and a conditional multiplexer output. A first potential output value is transmitted to the first conditional multiplexer input, and a second potential output value is transmitted to the second conditional multiplexer output. The conditional multiplexer couples either the first conditional multiplexer input or the second conditional multiplexer input to the conditional multiplexer output, according to an output control command. The output control command is generated by processing a set of arithmetic status-bits through a logical mask. The conditional multiplexer output is coupled to a first processing element output. A first set of arithmetic bits are generated according to the processing of the first processable value. A second set of arithmetic bits may be generated from a second processing operation. The selection of the arithmetic status-bits is performed by an arithmetic-status bit multiplexer selects the desired set of arithmetic status bits from among the first and second set of arithmetic status bits. The conditional multiplexer evaluates the select arithmetic status bits according to logical mask defining an algorithm for evaluating the arithmetic status bits.

Donohoe, Gregory↗
NASA NTRS1979

An end-to-end command and control concept for NASA data systems

Spacecraft command and control are currently taking on the characteristics of general computer-to-computer interprocess communication. The evolution of these systems during the 1980s will give NASA a true general-purpose end-to-end data request capability for the first time. This concept is presented in outline, with consideration of many of the detailed analyses and subsystem tradeoffs being performed as part of the NEEDS (NASA End-to-End Data System) program.

Desjardins, R.↗
NASA NTRS2016

Spaceport Command and Control System User Interface Testing

The Spaceport Command and Control System will be the National Aeronautics and Space Administration's newest system for launching commercial and government owned spacecraft. It's a large system with many parts all in need of testing. To improve upon testing already done by NASA engineers, the Engineering Directorate, Electrical Division (NE-E) of Kennedy Space Center has hired a group of interns each of the last few semesters to develop novel ways of improving the testing process.

SCCS↗