SEARCH · Search NASA
Results for “Cu surface”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Distribution of alkali cations near the Cu (111) surface in aqueous solution
Cation behavior and distribution at the electrochemical interface under both neutral and charged conditions.
Hydroxylamine decomposition on Cu(111) surface using Pynta
Explore the source record for details and available documents.
X-ray photoelectron spectroscopy study of chemically-etched Nd-Ce-Cu-O surfaces
Acetic acid, Br2, and HCl solutions are investigated for removing insulating species from Nd(1.85)Ce(0.15)CuO(4-delta) (NCCO) thin film surfaces. X-ray photoelectron spectroscopy (XPS) shows that the HCl etch is most effective, yielding O 1s spectra comparable to those obtained from samples cleaned in vacuum and a clear Fermi edge in the valence band region. Reduction and oxidation reversibly induces and eliminates, respectively, Fermi level states for undoped samples, but has no clearly observable effect on the XPS spectra for doped samples. Reactivity to air is much less for NCCO compared to hole superconductors, which is attributed to the lack of reactive alkaline earth elements in NCCO.
Micrometre-scale single-crystalline borophene on a square-lattice Cu(100) surface
Explore the source record for details and available documents.
Long‐Range Confinement‐Driven Enrichment of Surface Oxygen‐Relevant Species Promotes C−C Electrocoupling in CO 2 Reduction
Abstract CO 2 reduction is a highly attractive route to transform CO 2 into useful feedstocks, of which C 2 products are more desired than C 1 , yet face high kinetic barriers of C−C electrocoupling. Here, the engineering of pore‐enabled local confinement reaction environments is reported for tuning the enrichment of surface‐adsorbed oxygen‐relevant species and the establishment of their pronounced benefits in promoting C−C coupling over oxide‐derived Cu‐based catalysts. A new approach of utilizing the microphase separation of a block copolymer is developed to fabricate bicontinuous mesoporous CuO nanofibers (CuO‐BPNF). The enhanced confinement from long‐range mesochannels enables the adsorption of OH ad /O ad on the Cu surface at a wide negative potential range of −0.7 – −1.3 V in CO 2 reduction, which cannot be achieved over conventional deficient and short‐range pores. Constant‐potential DFT calculations reveal that the surface‐bound oxygen species weakens *CO affinity with the Cu (111) surface and lowers the kinetic barriers for both *CO−CO dimerization and *CO hydrogenation to enable *CO−CHO coupling. Accordingly, a CO 2 ‐to‐C 2 Faradaic efficiency of 74.7% over CuO‐BPNF is shown, significantly larger than counterparts with conventional pores. This work offers a general design principle of confinement engineering to manage the adsorption of reactive species for steering reaction pathways in interfacial catalysis.
Switching CO 2 Electroreduction Selectivity Between C 1 and C 2 Hydrocarbons on Cu Gas-Diffusion Electrodes
We report that regulating the selectivity toward a target hydrocarbon product is still the focus of CO 2 electroreduction. Here, we discover that the original surface Cu species in Cu gas-diffusion electrodes plays a more important role than the surface roughness, local pH, and facet in governing the selectivity toward C 1 or C 2 hydrocarbons. The selectivity toward C 2 H 4 progressively increases, while CH 4 decreases steadily upon lowering the Cu oxidation species fraction. At a relatively low electrodeposition voltage of 1.5 V, the Cu gas-diffusion electrode with the highest Cu δ+ /Cu 0 ratio favors the pathways of hydrogenation to form CH 4 with maximum Faradaic efficiency of 65.4% and partial current density of 228 mA cm -2 at -0.83 V vs RHE. At 2.0 V, the Cu gas-diffusion electrode with the lowest Cu δ+ /Cu 0 ratio prefers C–C coupling to form C 2+ products with Faradaic efficiency topping 80.1% at -0.75 V vs RHE, where the Faradaic efficiency of C 2 H 4 accounts for 46.4% and the partial current density of C 2 H 4 achieves 279 mA cm -2 . This work demonstrates that the selectivity from CH 4 to C 2 H 4 is switchable by tuning surface Cu species composition of Cu gas-diffusion electrodes.
Chemical and morphological evolution of hybrid conversion coatings in low-Earth orbit space environment
Understanding how protective coatings respond to the harsh low-Earth orbit (LEO) environment is essential for ensuring the safety, longevity, and cost-effectiveness of spacecraft. In particular, identifying environmentally friendly, non-chromate alternatives that can maintain performance under such conditions has both technological and regulatory significance. This study investigates the environmental stability of zirconium-based hybrid conversion coatings with Cu additives (Cu10 and Cu20) applied to cold-rolled steel, tested in the Materials International Space Station Experiment (MISSE) outside the International Space Station (ISS). Chemical and morphological analyses were carried out using a combination of electron microscopy and X-ray spectroscopy techniques, including scanning electron microscopy (SEM), scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy (STEM-EDS), X-ray photoelectron spectroscopy (XPS), and X-ray absorption near-edge structure (XANES) spectroscopy. After exposure outside the ISS, all coatings remained structurally intact, with all exhibiting a uniform Zr-rich matrix and embedded Cu-rich clusters, while a thin Si-rich surface layer developed from interaction with space environments. Depth-resolved XPS showed a layered structure with CuO on the surface, Cu 2 O, and partial Zr(IV) reduction near Cu-rich sites, evidence of Atomic Oxygen (AO)-driven surface oxidation. These results demonstrate that Cu–Zr coatings maintain their chemical integrity and microstructure in harsh space environments, offering a non-chromate alternative for long-term aerospace protection. These insights provide valuable guidance for developing next-generation protective coatings that combine environmental sustainability with the reliability required for future aerospace and orbital applications.
Enhanced Methanol Synthesis from CO 2 Hydrogenation Achieved by Tuning the Cu–ZnO Interaction in ZnO/Cu 2 O Nanocube Catalysts Supported on ZrO 2 and SiO 2
The nature of the Cu–Zn interaction and especially the role of Zn in Cu/ZnO catalysts used for methanol synthesis from CO 2 hydrogenation are still debated. Migration of Zn onto the Cu surface during reaction results in a Cu–ZnO interface, which is crucial for the catalytic activity. However, whether a Cu–Zn alloy or a Cu–ZnO structure is formed and the transformation of this interface under working conditions demand further investigation. Here, ZnO/Cu 2 O core–shell cubic nanoparticles with various ZnO shell thicknesses, supported on SiO 2 or ZrO 2 were prepared to create an intimate contact between Cu and ZnO. The evolution of the catalyst’s structure and composition during and after the CO 2 hydrogenation reaction were investigated by means of operando spectroscopy, diffraction, and ex situ microscopy methods. The Zn loading has a direct effect on the oxidation state of Zn, which, in turn, affects the catalytic performance. High Zn loadings, resulting in a stable ZnO catalyst shell, lead to increased methanol production when compared to Zn-free particles. Low Zn loadings, in contrast, leading to the presence of metallic Zn species during reaction, showed no significant improvement over the bare Cu particles. Therefore, our work highlights that there is a minimum content of Zn (or optimum ZnO shell thickness) needed to activate the Cu catalyst. Furthermore, in order to minimize catalyst deactivation, the Zn species must be present as ZnO x and not metallic Zn or Cu–Zn alloy, which is undesirably formed during the reaction when the precatalyst ZnO overlayer is too thin.
Thin Film Characterization on Cu/SnAg Solder Interface for 3D Packaging Technologies
Copper is a commonly used interconnect metal in microelectronic interconnects due to its exceptional electrical and thermal properties. Particularly in applications of the 2.5 and 3D integration, Cu is utilized in through-silicon-vias (TSVs) and flip chip interconnects between microelectronic chips for providing miniaturization, lower power and higher performance than current 2D packaging approaches. Furthermore, SnAg capped Cu pillars are a common high-density interconnect technology for flip chip bonding. For these interconnects, specific properties of the Cu surface, such as roughness and cleanliness, are an important factor in the process to ensure quality solder bumps. During electroplating, tight processing parameters must be met so that defects are avoided, and high bump uniformity is achieved. An understanding of the interactions at the solder and Cu pillar interface is needed, based on the electroplating parameters, to determine the best method for populating solder on the wafer surface. In this study, surface treatment techniques such as oxygen plasma cleaning were performed on the Cu surfaces and the SnAg plating chemistry for depositing the solder were evaluated through hull cell testing to qualitatively determine the range of current densities to investigate. It was observed that current density while plating played a large role in solder bump deposition morphology. At the higher current densities greater than 60 mA/cm 2 , bump height non-uniformity and dendritic growth are observed and at lower current densities, less than or equal to 60 mA/cm 2 , uniform, continuous bump height occurred.
Interaction of metastable molecules with surfaces
Metastable diatomic N beam scattering from Teflon and Cu surfaces measured for velocity and angular distributions
Metal oxide-promoted calcium cuprate catalysts for diol oxidative dehydrocyclization to lactones
Here, this work investigates structure-function relationships in electronically tunable, redox-active, basic Cu-Ca mixed metal oxide catalysts for oxidative dehydrocyclization of liquid diols to lactones. Compositional screening identified Ni 2+ and Zn 2+ as effective promoters that increase the surface Cu 2+ population by ∼1.7× and Cu-normalized activity for liquid 1,4-butanediol conversion to γ-butyrolactone by ∼3–4×. In situ Raman spectroscopy, in situ X-ray absorption spectroscopy (XAS), in situ diffuse-reflectance Fourier transform infrared spectroscopy (DRIFTS), ex situ X-ray diffraction (XRD), and H 2 -temperature-programmed reduction (H 2 -TPR) show that Ni 2+ or Zn 2+ incorporation promotes the formation of Ca 0.82 Cu 1.00 O 2 nanoparticles under mild calcination conditions. This cuprate phase features stronger and shorter Cu–O bonds (1.90 Å) than inactive bulk CuO (1.95 Å) and square-planar Cu 2+ O 4 sites with enhanced d z2 electrophilicity, strengthening alkoxy adsorption. Pyridine-DRIFTS confirms the purely basic nature of the catalyst surface, while methanol-DRIFTS indicates Cu 2+ surface enrichment with Ni or Zn promotion, where Cu–O(Ca)–Cu sites can exist as amorphous domains or a truncation layer on crystalline nanoparticles.
Codesign of an integrated metal–insulator–semiconductor photocathode for photoelectrochemical reduction of CO 2 to ethylene
Photoelectrochemical carbon-dioxide reduction (PEC CO 2 R) is a potentially attractive means for producing chemicals and fuels using sunlight, water, and carbon dioxide; however, this technology is in its infancy. To date, most studies of PEC CO 2 R have reported products containing one carbon atom (C 1 products) but the production of valuable products containing two or more carbons (C 2+ products), such as ethylene, ethanol, etc., is rarely demonstrated. Metal–semiconductor–insulator (MIS) photocathode/catalyst structures offer a promising approach for this purpose, since they integrate the functions of light absorption, charge separation, and catalysis. In this study, we have investigated a Cu/TiO 2 /p-Si photocathode/catalyst structure with the aim of establishing the effects of semiconductor–insulator interactions on the performance of the photocathode and the influence of the direction of illumination of the MIS structure on the total current density and the distribution of products formed by on the Cu catalyst. Here, we have also examined the influence of ionomer coatings deposited on the Cu surface on the total current density and the distribution of products formed. A major finding is that for a fixed Cu potential the distribution of products formed by PEC CO 2 R are the same, irrespective of the direction of illumination, and are identical to those obtained by electrochemical reduction of CO 2 (EC CO 2 R). Another important finding is that the total current density and the faradaic efficiency to ethylene are enhanced significantly by deposition of a thin bilayer of Sustainion/Nafion onto the surface of the Cu.
Operando Raman spectroscopy uncovers hydroxide and CO species enhance ethanol selectivity during pulsed CO 2 electroreduction
Pulsed CO 2 electroreduction (CO 2 RR) has recently emerged as a facile way to in situ tune the product selectivity, in particular toward ethanol, without re-designing the catalytic system. However, in-depth mechanistic understanding requires comprehensive operando time-resolved studies to identify the kinetics and dynamics of the electrocatalytic interface. Here, we track the adsorbates and the catalyst state of pre-reduced Cu 2 O nanocubes (~30 nm) during pulsed CO 2 RR using sub-second time-resolved operando Raman spectroscopy. By screening a variety of product-steering pulse length conditions, we unravel the critical role of co-adsorbed OH and CO on the Cu surface next to the oxidative formation of Cu-O ad or CuO x /(OH) y species, impacting the kinetics of CO adsorption and boosting the ethanol selectivity. However, a too low OH ad coverage following the formation of bulk-like Cu 2 O induces a significant increase in the C 1 selectivity, while a too high OH ad coverage poisons the surface for C-C coupling. Thus, we unveil the importance of co-adsorbed OH on the alcohol formation under CO 2 RR conditions and thereby, pave the way for improved catalyst design and operating conditions.
Concurrent Amorphization and Nanocatalyst Formation in Cu‐Substituted Perovskite Oxide Surface: Effects on Oxygen Reduction Reaction at Elevated Temperatures
Abstract The activity and durability of chemical/electrochemical catalysts are significantly influenced by their surface environments, highlighting the importance of thoroughly examining the catalyst surface. Here, Cu‐substituted La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3‐δ is selected, a state‐of‐the‐art material for oxygen reduction reaction (ORR), to explore the real‐time evolution of surface morphology and chemistry under a reducing atmosphere at elevated temperatures. Remarkably, in a pioneering observation, it is discovered that the perovskite surface starts to amorphize at an unusually low temperature of approximately 100 °C and multicomponent metal nanocatalysts additionally form on the amorphous surface as the temperature raises to 400 °C. Moreover, this investigation into the stability of the resulting amorphous layer under oxidizing conditions reveals that the amorphous structure can withstand a high‐temperature oxidizing atmosphere (≥650 °C) only when it has undergone sufficient reduction for an extended period. Therefore, the coexistence of the active nanocatalysts and defective amorphous surface leads to a nearly 100% enhancement in the electrode resistance for the ORR over 200 h without significant degradation. These observations provide a new catalytic design strategy for using redox‐dynamic perovskite oxide host materials.
Measuring Charge Transfer between Adsorbate and Metal Surfaces
Explore the source record for details and available documents.