Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel performance analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Executing BISON-CASL Fuel Performance Cases Using VERA-CS Output

As the Consortium for Advanced Simulation of Light Water Reactors (CASL) moves forward with more complex multiphysics simulations, there is increased focus on incorporating fuel performance analysis methods. The coupled neutronics/thermal-hydraulics capabilities within the Virtual Environment for Reactor Applications Core Simulator (VERA-CS) have become relatively stable and major advances have been made in analysis efforts, including the simulations of twelve cycles of Watts Bar Nuclear Unit 1 (WBN1) operation. However, VERA-CS approaches for treating fuel pin heat transfer have well-known limitations that could be eliminated through better integration with the BISON-CASL fuel performance code. Several approaches are being taken to improve or replace the VERA-CS fuel models and improve integration with BISON-CASL. Tiamat is being developed to replace the fuel models with a direct coupling of BISON-CASL and the neutronics and coolant heat transfer of VERA-CS. Tiamat will execute in an inline mode that allows for in-memory transfer of VERA-CS data to BISON-CASL. This will provide fuel performance results during core simulation. However, fuel performance typically undergoes an independent analysis using a stand-alone fuel performance code with manually specified input defined from an independent core simulator solution or set of assumptions. This milestone covers initial efforts to facilitate using VERA for core simulation and fuel performance to operate in this mode of execution. This approach will be used for several CASL fuel performance challenges, such as RIAs and DNB. These issues require time-dependent full core results to establish the boundary conditions for the high-fidelity BISON-CASL simulations. The approach will also be used to improve fuel temperature models in VERA-CS, guide the development of Tiamat, and simplify the use of BISON-CASL within VERA for industry users.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhancing the ABAQUS thermomechanics code to simulate multipellet steady and transient LWR fuel rod behavior

A powerful multidimensional fuels performance analysis capability, applicable to both steady and transient fuel behavior, is developed based on enhancements to the commercially available ABAQUS general-purpose thermomechanics code. Enhanced capabilities are described, including: UO2 temperature and burnup dependent thermal properties, solid and gaseous fission product swelling, fuel densification, fission gas release, cladding thermal and irradiation creep, cladding irradiation growth, gap heat transfer, and gap/plenum gas behavior during irradiation. This new capability is demonstrated using a 2D axisymmetric analysis of the upper section of a simplified multipellet fuel rod, during both steady and transient operation. Comparisons are made between discrete and smeared-pellet simulations. Computational results demonstrate the importance of a multidimensional, multipellet, fully-coupled thermomechanical approach. Interestingly, many of the inherent deficiencies in existing fuel performance codes (e.g., 1D thermomechanics, loose thermomechanical coupling, separate steady and transient analysis, cumbersome pre- and post-processing) are, in fact, ABAQUS strengths.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CAMPUS: Fully Coupled Multiphysics Modeling and Simulation of LWR and FBR Nuclear Fuel Behavior

Nuclear fuels operate in an environment that involves complex multiphysics phenomena, and the multiphysics behavior is often tightly coupled. The prediction of fuel behavior under irradiation involves very complex material behavior that is not seen in any other engineering discipline. Understanding and predicting the evolving material properties and phenomenal behaviors of nuclear fuels are major challenges for fuel design and behavior prediction. The multiphysics behavior is often a tightly coupled thermal, mechanical and chemical phenomenon associated with a large number of control parameters and uncertainties, which requires an advanced fuel performance modeling and simulation capability to improve the existing reactors performance, to address environmental and reactor safety concerns. Nuclear fuel performance modeling and simulation capability is necessary as a result of the high cost and difficulty in experimental measurements. So, a fuel performance code called CityU Advanced Multiphysics Nuclear Fuels Performance with User-defined Simulations (CAMPUS) was developed to predict both light water reactor and fast reactor fuel behavior. An effective approach was developed using self-defined multiphysics models based on the framework of COMSOL Multiphysics to manage the nonlinearities associated with light water reactor and fast reactor fuels performance analysis. The modelling and simulations approach is of particular importance since it demonstrates highly interrelated and nonlinear fuel performance models can be developed and implemented into a multiphysics platform, and thus more efforts can be put into physics model development and improvement. The modelling results can be used to identify the important phenomena and parameters, to direct and design experiments and to assist in post analysis of expensive nuclear experiments for light water reactor and fast reactor nuclear fuel performance analysis. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TRISO Fuel Performance: Modeling, Integration into Mainstream Design Studies, and Application to a Thorium-fueled Fusion-Fission Hybrid Blanket

This study focused on creating a new tristructural isotropic (TRISO) coated particle fuel performance model and demonstrating the integration of this model into an existing system of neutronics and heat transfer codes, creating a user-friendly option for including fuel performance analysis within system design optimization and system-level trade-off studies. The end product enables both a deeper understanding and better overall system performance of nuclear energy systems limited or greatly impacted by TRISO fuel performance. A thorium-fueled hybrid fusion-fission Laser Inertial Fusion Energy (LIFE) blanket design was used for illustrating the application of this new capability and demonstrated both the importance of integrating fuel performance calculations into mainstream design studies and the impact that this new integrated analysis had on system-level design decisions. A new TRISO fuel performance model named TRIUNE was developed and verified and validated during this work with a novel methodology established for simulating the actual lifetime of a TRISO particle during repeated passes through a pebble bed. In addition, integrated self-consistent calculations were performed for neutronics depletion analysis, heat transfer calculations, and then fuel performance modeling for a full parametric study that encompassed over 80 different design options that went through all three phases of analysis. Lastly, side studies were performed that included a comparison of thorium and depleted uranium (DU) LIFE blankets as well as some uncertainty quantification work to help guide future experimental work by assessing what material properties in TRISO fuel performance modeling are most in need of improvement. A recommended thorium-fueled hybrid LIFE engine design was identified with an initial fuel load of 20MT of thorium, 15% TRISO packing within the graphite fuel pebbles, and a 20cm neutron multiplier layer with beryllium pebbles in flibe molten salt coolant. It operated at a system power level of 2000 MW th , took about 3.5 years to reach full plateau power, and was capable of an End of Plateau burnup of 38.7 %FIMA if considering just the neutronic constraints in the system design; however, fuel performance constraints led to a maximum credible burnup of 12.1 %FIMA due to a combination of internal gas pressure and irradiation effects on the TRISO materials (especially PyC) leading to SiC pressure vessel failures. The optimal neutron spectrum for the thorium-fueled blanket options evaluated seemed to favor a hard spectrum (low but non-zero neutron multiplier thicknesses and high TRISO packing fractions) in terms of neutronic performance but the fuel performance constraints demonstrated that a significantly softer spectrum would be needed to decrease the rate of accumulation of fast neutron fluence in order to improve the maximum credible burnup the system could achieve.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pellet Cladding Mechanical Interaction Modeling Using the Extended Finite Element Method

As a brittle material, the ceramic UO2 used as light water reactor fuel experiences significant fracturing throughout its life, beginning with the first rise to power of fresh fuel. This has multiple effects on the thermal and mechanical response of the fuel/cladding system. One such effect that is particularly important is that when there is mechanical contact between the fuel and cladding, cracks that extending from the outer surface of the fuel into the volume of the fuel cause elevated stresses in the adjacent cladding, which can potentially lead to cladding failure. Modeling the thermal and mechanical response of the cladding in the vicinity of these surface-breaking cracks in the fuel can provide important insights into this behavior to help avoid operating conditions that could lead to cladding failure. Such modeling has traditionally been done in the context of finite-element-based fuel performance analysis by modifying the fuel mesh to introduce discrete cracks. While this approach is effective in capturing the important behavior at the fuel/cladding interface, there are multiple drawbacks to explicitly incorporating the cracks in the finite element mesh. Because the cracks are incorporated in the original mesh, the mesh must be modified for cracks of specified location and depth, so it is difficult to account for crack propagation and the formation of new cracks at other locations. The extended finite element method (XFEM) has emerged in recent years as a powerful method to represent arbitrary, evolving, discrete discontinuities within the context of the finite element method. Development work is underway by the authors to implement XFEM in the BISON fuel performance code, and this capability has previously been demonstrated in simulations of fracture propagation in ceramic nuclear fuel. These preliminary demonstrations have included only the fuel, and excluded the cladding for simplicity. This paper presents initial results of efforts to apply XFEM to model stress concentrations induced by fuel fractures at the fuel/cladding interface during pellet cladding mechanical interaction (PCMI). This is accomplished by enhancing the thermal and mechanical contact enforcement algorithms employed by BISON to permit their use in conjunction with XFEM. The results from this methodology are demonstrated to be equivalent to those from using meshed discrete cracks. While the results of the two methods are equivalent for the case of a stationary crack, it is demonstrated that XFEM provides the additional flexibility of allowing arbitrary crack initiation and propagation during the analysis, and minimizes model setup effort for cases with stationary cracks.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pellet-clad mechanical interaction screening using VERA applied to Watts Bar Unit 1, Cycles 1–3

The Consortium for Advanced Simulation of Light Water Reactors (CASL) aims to provide high-fidelity multiphysics simulations of light water nuclear reactors. To accomplish this, CASL is developing the Virtual Environment for Reactor Applications (VERA), which is a suite of code packages for thermal hydraulics, neutron transport, fuel performance, and coolant chemistry. As VERA continues to grow and expand, there has been an increased focus on incorporating fuel performance analysis methods. One of the primary goals of CASL is to estimate local cladding failure probability through pellet-clad interaction, which consists of both pellet-clad mechanical interaction (PCMI) and stress corrosion cracking. Estimating clad failure is important to preventing release of fission products to the primary system and accurate estimates could prove useful in establishing less conservative power ramp rates or when considering load-follow operations.While this capability is being pursued through several different approaches, the procedure presented in this article focuses on running independent fuel performance calculations with BISON using a file-based one-way coupling based on multicycle output data from high fidelity, pin-resolved coupled neutron transport–thermal hydraulics simulations. This type of approach is consistent with traditional fuel performance analysis methods, which are typically separate from core simulation analyses. A more tightly coupled approach is currently being developed, which is the ultimate target application in CASL.Recent work simulating 12 cycles of Watts Bar Unit 1 with VERA core simulator are capitalized upon, and quarter-core BISON results for parameters of interest to PCMI (maximum centerline fuel temperature, maximum clad hoop stress, and minimum gap size) are presented for Cycles 1–3. In conclusion, based on these results, this capability demonstrates its value and how it could be used as a screening tool for gathering insight into PCMI, singling out limiting rods for further, more detailed analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Analysis of a Loop for Fission Gas Release and Monitoring at the PULSTAR Reactor

Modern nuclear fuel performance analysis tools aim at establishing a predictive approach for examining macroscopic fuel behavior due to fuel gaseous swelling and the associated pellet cladding mechanical interaction (PCMI). In general, the macroscopic behavior is highly sensitive to understanding microscopically driven phenomena, which in this case is the release of fission gas (i.e., Kr and Xe) from the fuel. Previous studies identified the uncertainties associated with the intra-granular fission gas diffusion coefficient as most limiting for the accuracy of fission gas release calculations. In particular, it was concluded that, in order to improve fission gas release as well as gaseous swelling predictions using fuel performance codes, a better characterization of the diffusion coefficient is needed. This work explores the implementation of an on-line fission gas release and measurement loop at the North Carolina State University (NCSU) PULSTAR reactor. A unique characteristic of this loop is the ability to control the temperature of the fuel samples during irradiation to establish a more accurate correlation between the irradiation conditions and an observable such as the intragranular gas diffusion coefficient. Analysis was performed of an 'in-pile' fission gas release experiment that is currently under implementation at the NCSU PULSTAR reactor. Using MCNP6 calculations and COMSOL simulations the fission rate density and temperature distributions in UO{sub 2} microspheres were estimated. To explore the feasibility of detecting fission gas isotopes, estimates of R/B for {sup 138}Xe were obtained using the equivalent sphere model and combined with MCNP6 predicted B estimates to obtain R. Assuming detection in a typical gamma-ray spectrometry HPGe system, it was conclude that reasonable count rates will be achieved to allow extraction of release information. At this stage, accurate assessment is underway of the performance of various loop components to set the final design criteria in support of loop fabrication. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainty Quantification and Sensitivity Analysis Applications to Fuel Performance Modeling

Best-estimate fuel performance codes such as BISON currently under development at the Idaho National Laboratory, utilize empirical and mechanistic lower-length-scale informed correlations to predict fuel behavior under normal operating and accident reactor conditions. Traditionally, best-estimate results are presented using the correlations with no quantification of the uncertainty in the output metrics of interest. However, there are associated uncertainties in the input parameters and correlations used to determine the behavior of the fuel and cladding under irradiation. Therefore, it is important to perform uncertainty quantification and include confidence bounds on the output metrics that take into account the uncertainties in the inputs. In addition, sensitivity analyses can be performed to determine which input parameters have the greatest influence on the outputs. In this paper we couple the BISON fuel performance code to the DAKOTA uncertainty analysis software to analyze a representative fuel performance problem. The case studied in this paper is based upon rod 1 from the IFA-432 integral experiment performed at the Halden Reactor in Norway. The rodlet is representative of a BWR fuel rod. The input parameters uncertainties are broken into three separate categories including boundary condition uncertainties (e.g., power, coolant flow rate), manufacturing uncertainties (e.g., pellet diameter, cladding thickness), and model uncertainties (e.g., fuel thermal conductivity, fuel swelling). Utilizing DAKOTA, a variety of statistical analysis techniques are applied to quantify the uncertainty and sensitivity of the output metrics of interest. Specifically, we demonstrate the use of sampling methods, polynomial chaos expansions, surrogate models, and variance-based decomposition. The output metrics investigated in this study are the fuel centerline temperature, cladding surface temperature, fission gas released, and fuel rod diameter. The results highlight the importance of quantifying the uncertainty and sensitivity in fuel performance modeling predictions and the need for additional research into improving the material models that are currently available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of point defect accumulation on in-pile thermal conductivity degradation: Fuel rod defect distribution and deviation between in-pile and post irradiation thermal conductivity

As nuclear fuel burn-up increases, its thermal conductivity degrades due to the accumulation of defects that lead to increased phonon scattering rates. This results in a rise in the centerline temperature of the fuel rod, whereby heat generation must be decreased to avoid undesired behavior such as fuel melting and extensive fission gas release. Fuel performance codes are utilized to optimize the fuel's operational conditions; while they are based on established physical principles, their empirical nature limits their predictive capabilities. Recently, an effort has been made to develop predictive fuel performance codes for commonly used nuclear fuels, as well as accelerated qualification of advanced nuclear fuels. In this report, we elaborate on the importance of careful analysis of point defects’ impact on thermal conductivity in fuel performance analysis. Further, a model is presented where point defect concentration is estimated based on Rate Theory modeling and used as input to the Klemens-Callaway model to calculate their contribution to the degradation of thermal conductivity in UO 2 under prototypical irradiation conditions. This analysis suggests that point defect concentration is significant at the rim of the fuel pellet and neglecting this leads to underestimation of the centerline temperature, which may have consequences on fission gas behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fuel Performance Simulation of Iron-Chrome-Aluminum Cladding during Steady-State LWR Operation

During a severe accident scenario, such as a loss-of-coolant accident, a nuclear reactor may lose its capacity to cool its fuel. The fuel rod temperatures begin to increases, quickly reaching temperatures where the coolant begins to evaporate. This lowers the coolant level in the core and eventually uncovers the fuel. Without sufficient heat transfer from the fuel rods to the coolant, the temperature of the fuel and cladding will increase dramatically. In the case of traditional zirconium-based alloys, as the temperature of the cladding reaches ∼1200 deg. C the zirconium rapidly begins to oxidize with H{sub 2}O in the coolant and steam. This oxidation reaction causes both thinning of the Zr-alloy cladding as the metal reacts and releases large amounts of H{sub 2} gas into the reactor pressure vessel. In order to increase the safety margin of LWR fuel in severe accident scenarios, several alternative cladding materials have been proposed to replace the currently used zirconium-based alloys. Of these materials, there is a particular focus on select iron-chrome-aluminum (FeCrAl) alloys because of slower oxidation Kinetics in high temperature steam than zirconium-based alloys. This increased oxidation resistance may provide additional coping time to mitigate any further damage resulting from an accident. However, by changing the cladding material, the neutronic characteristics of the core will change. FeCrAl alloys exhibit thermal neutron absorption cross sections nearly ∼12-16 x greater than Zr-alloys. This decreases the reactivity of the core, subsequently decreasing the potential cycle length for operation. To counteract this, fissile material may be added in the form of increased enrichment or increased fuel mass or the cladding thickness might be decreased, effectively reducing the neutronic penalty from using the alloy. In this study, all three changes are considered. To assess the viability of FeCrAl as an alternative cladding to Zr-alloys, engineering-scale fuel performance analysis is used to monitor the cladding and integral fuel rod behavior through its operation. Ongoing work is being performed to identify key parameters essential to modeling FeCrAl alloys for LWR applications and properly model fuel compliance and stress relief mechanisms for UO{sub 2} fuel. To improve the predictive capability of fuel performance codes for FeCrAl cladding under normal operation, high-fidelity mechanistic/physics-based material models are needed. This information can be generated and improved by access to experimental data on targeted FeCrAl alloys. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Ceramic nuclear fuel fracture modeling with the extended finite element method

Ceramic fuel pellets used in nuclear light water reactors experience significant fracture due to the high thermal gradients experienced under normal operating conditions. This has important effects on the performance of the fuel system. Because of this, a realistic, physically based fracture modeling capability is essential to predict fuel behavior in a wide variety of normal and off-normal conditions. The extended finite element method (X-FEM) is a powerful method to represent arbitrary propagating discrete cracks in finite element models, and has many characteristics that make it attractive for nuclear fuel performance analysis. This paper describes the implementation of X-FEM in a multiphysics fuel performance code and presents applications of that capability. These applications include several thermal mechanics fracture benchmark problems, which demonstrate the accuracy of this approach. It also includes application of this capability to study nuclear fuel fracture, both on stationary and propagating cracks. The study on stationary cracks shows the effects that varying the number of radial cracks and the length of those cracks have on the energy release rate. Here, the propagating crack case demonstrates random initiation and subsequent propagation of interacting thermally induced cracks during an initial ramp to full power with fresh fuel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Uncertainty quantification and sensitivity analysis applications to fuel performance modeling

Best-estimate fuel performance codes such as BISON currently under development at the Idaho National Laboratory, utilize empirical and mechanistic lower-length-scale informed correlations to predict fuel behavior under normal operating and accident reactor conditions. Traditionally, best-estimate results are presented using the correlations with no quantification of the uncertainty in the output metrics of interest. However, there are associated uncertainties in the input parameters and correlations used to determine the behavior of the fuel and cladding under irradiation. Therefore, it is important to perform uncertainty quantification and include confidence bounds on the output metrics that take into account the uncertainties in the inputs. In addition, sensitivity analyses can be performed to determine which input parameters have the greatest influence on the outputs. In this paper we couple the BISON fuel performance code to the DAKOTA uncertainty analysis software to analyze a representative fuel performance problem. The case studied in this paper is based upon rod 1 from the IFA-432 integral experiment performed at the Halden Reactor in Norway. The rodlet is representative of a BWR fuel rod. The input parameters uncertainties are broken into three separate categories including boundary condition uncertainties (e.g., power, coolant flow rate), manufacturing uncertainties (e.g., pellet diameter, cladding thickness), and model uncertainties (e.g., fuel thermal conductivity, fuel swelling). Utilizing DAKOTA, a variety of statistical analysis techniques are applied to quantify the uncertainty and sensitivity of the output metrics of interest. Specifically, we demonstrate the use of sampling methods, polynomial chaos expansions, surrogate models, and variance-based decomposition. The output metrics investigated in this study are the fuel centerline temperature, cladding surface temperature, fission gas released, and fuel rod diameter. The results highlighted the importance of the thermal conductivity of the fuel, the thermal conductivity of the cladding, the gap thickness, the fuel thermal expansion, and the system power factor as influential parameters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Full-core analysis for FeCrAl enhanced accident tolerant fuel in boiling water reactors

The impact of replacing Zircaloy with FeCrAl, a candidate enhanced accident-tolerant fuel cladding material, was evaluated for 10 × 10 boiling water reactor fuel bundles. Results from a series of full-core parametric studies estimated that replacing UO 2 /Zircaloy with UO 2 /FeCrAl would require an average enrichment increase of 0.6% 235 U throughout the fuel lattice with the cladding and channel box thicknesses halved and fuel pellet diameter increased. Full-core results indicated that UO 2 /FeCrAl models with these geometric/enrichment specifications matched the base UO 2 /Zircaloy cycle length of 527 effective full power days. Optimization studies of the full-core design established loading and control blade patterns for both Zircaloy and FeCrAl models. A side study was conducted modeling a hybrid fuel bundle consisting of FeCrAl cladding and a SiC/Ni/Cr channel box. By halving the cladding thickness, the enrichment level required was less than that of the Zircaloy base case design after performing loading pattern optimization of the hybrid bundle core. Lastly, the thermomechanical performance of a Zircaloy-cladded fuel rod was compared to that of a FeCrAl system. Results from this analysis show that, if starting from the same fuel-cladding gap thickness, a FeCrAl-clad fuel rod operates with a greater average fuel centerline temperature, comparable axial elongation and radial displacement, and longer time to gap closure compared to a Zircaloy-clad fuel rod. Furthermore, this fuel performance analysis was primarily based on the commercial Kanthal APMT FeCrAl alloy but also used available data for the C35M FeCrAl alloy developed at Oak Ridge National Laboratory.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Calibration of a fuel relocation model in BISON

We demonstrate parameter calibration in the context of the BISON nuclear fuels performance analysis code. Specifically, we present the calibration of a parameter governing fuel relocation: the power level at which the relocation model is activated. This relocation activation parameter is a critical value in obtaining reasonable comparison with fuel centerline temperature measurements. It also is the subject of some debate in terms of the optimal values. We show that the optimal value does vary across the calibration to individual rods. We also demonstrate an aggregated calibration, where we calibrate to observations from six rods. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

BISON analysis of FeCrAl and Zircaloy cladding deformation during simulated BWR cyclic dryout conditions

The BISON fuel performance analysis code has been used to study FeCrAl and Zircaloy cladding performance to better understand cladding deformation behavior in boiling water reactors during conditions caused by anticipated operational occurrences (AOOs) or by anticipated transients without scram (ATWS). BISON models of novel separate effects tests simulating ATWS events predicted mechanical responses to thermal cycling boundary conditions. Here, we assessed FeCrAl and Zircaloy deformation and burst models to determine those best suited for cyclic dryout event analysis. In addition, we compared diametral strain profiles of the post-experiment claddings to simulation results. The capability of the BISON code for modeling BWR AOO or ATWS events is promising.

36 MATERIALS SCIENCE↗