Executing BISON-CASL Fuel Performance Cases Using VERA-CS Output

Abstract

As the Consortium for Advanced Simulation of Light Water Reactors (CASL) moves forward with more complex multiphysics simulations, there is increased focus on incorporating fuel performance analysis methods. The coupled neutronics/thermal-hydraulics capabilities within the Virtual Environment for Reactor Applications Core Simulator (VERA-CS) have become relatively stable and major advances have been made in analysis efforts, including the simulations of twelve cycles of Watts Bar Nuclear Unit 1 (WBN1) operation. However, VERA-CS approaches for treating fuel pin heat transfer have well-known limitations that could be eliminated through better integration with the BISON-CASL fuel performance code. Several approaches are being taken to improve or replace the VERA-CS fuel models and improve integration with BISON-CASL. Tiamat is being developed to replace the fuel models with a direct coupling of BISON-CASL and the neutronics and coolant heat transfer of VERA-CS. Tiamat will execute in an inline mode that allows for in-memory transfer of VERA-CS data to BISON-CASL. This will provide fuel performance results during core simulation. However, fuel performance typically undergoes an independent analysis using a stand-alone fuel performance code with manually specified input defined from an independent core simulator solution or set of assumptions. This milestone covers initial efforts to facilitate using VERA for core simulation and fuel performance to operate in this mode of execution. This approach will be used for several CASL fuel performance challenges, such as RIAs and DNB. These issues require time-dependent full core results to establish the boundary conditions for the high-fidelity BISON-CASL simulations. The approach will also be used to improve fuel temperature models in VERA-CS, guide the development of Tiamat, and simplify the use of BISON-CASL within VERA for industry users.