Search NASA⌕ Search

SEARCH · Search NASA

Results for “Game Changing Development (GCD)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

50 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Temporal Fluctuations in a 100-A LaB6 Hollow Cathode

The temporal fluctuations in the near plume of a 100-Amperes LaB6 (Lanthanum hexaboride) hollow cathode are experimentally investigated. At high currents, turbulent oscillations may contribute to two of the anomalous processes of hollow cathode operation - anomalous resistivity and the production of energetic ions. A detailed study of the properties of the oscillations in a high current cathode is necessary to determine the impact of the fluctuation spectrum on these two effects. In this investigation, a probe array is employed to measure the amplitude and dispersion of axial modes in the plume while a retarding potential analyzer yields estimates of the radial ion energy distribution. The onset of the ion acoustic turbulence (IAT) is observed at high current values, and the character of the turbulent spectrum is shown to agree with weak turbulent theory: the amplitude of the spectrum decreases with flow rate but increases with discharge current. Estimates of the anomalous collision frequency based on experimental observations indicate that the IAT collision frequency can exceed the classical collision frequency at sufficiently high discharge current densities. Additionally, the onset of the IAT is shown to be correlated with the appearance of a high energy ion tail and that the energy in this tail is comparable to the energy in the experimentally-observed IAT.

production of ions↗
NASA NTRSDate not supplied

Dust Mitigation Technology to Enable Survive the Night Capabilities

Introduction: As we return to the Moon, the lunar regolith (i.e. lunar dust) covering the surface will be an obstacle to nominal operations. Accounts from Apollo astronauts and analysis of hardware returned from the surface illustrate just how deleterious the dust can be [1]. During Apollo missions, the lunar dust adhered to hardware mechanically and electrostatically [2]. Surviving the Night: Mitigating the lunar dust will be critical to surviving the night. Going hand-in-hand with other extreme environment considerations, dust mitigation is critical to mission success. Dust Impacts on Other Systems: The lunar dust can have negative implications for power, thermal, mechanisms, and several other systems or sub-systems. For example, Apollo encountered marked degradation of performance in heat rejection systems for the lunar roving vehicle, science packages, and other components because of the lunar dust [1]. For power alone, dust can cause internal clogging for power connectors, heat rejection issues, excessive dust on reflective surfaces, reduced power output for solar arrays, and so on. Dust Mitigation Strategy: In addition to considering technology solutions, it is important for hardware, systems, and or components to have a dust mitigation strategy. At a high level, hardware that will encounter the lunar dust should consider these things when defining a dust mitigation strategy: • Understand Natural Environment • Understand Induced Environment • Understand Tolerance to Dust • Write Dust Requirements • Select Dust Mitigation Solutions • Test Hardware in Dusty Environment More information on each of these can be provided to hardware owners. Dust Mitigation Technology Development: NASA has a series of technologies that may be available for hardware that needs to survive the lunar night. Many of these solutions are leveraging dust mitigation technology development efforts from NASA’s Space Technology Mission Directorate (STMD), as well as efforts from ESDMD programs, industry, and academia. Through a series of STMD programs (both internal to NASA and through partnerships), there are several technologies in development as considerations as dust mitigation solutions for hardware. Within STMD, the Game Changing Development Program (GCD) has funded several internal dust mitigation projects including low to mid TRL development, demonstrations on CLPS landers of high TRL solutions, and creating standards and best practices for dust mitigation. STMD dust mitigation efforts also include a series of partnerships for developing technologies and advancing the state of dust mitigation at NASA. This includes the Lunar Surface Innovation Consortium (LSIC), Small Business Innovation Research, Early Stage Innovations (ESI), Space Technology Research Grants (STRG), Announcement of Collaboration Opportunities (ACOs) and Tipping Points (TPs), and Challenges and Crowdsourcing, among others. There are also a series of dust mitigation solutions that have been widely used terrestrially, or during Apollo. In recent years, several studies have produced more data on the efficacy of these potential solutions in the lunar environment. Dust Mitigation Solutions: Dust mitigation solutions generally fall into four categories: • Dust Tolerant Mechanisms • Passive Dust Mitigation Capabilities • Active Dust Mitigation Capabilities • Dust Measurement Capabilities There are a series of solutions that may prove beneficial for hardware that needs to survive the lunar night, including new technology development as well as proven, terrestrial solutions. This presentation will discuss in more detail what some of these solutions are for payloads going to the surface. References: [1] J. R. Gaier, NASA/TM—2005-213610, The Effects of Lunar Dust on EVA Systems During the Apollo Missions [2] T. J. Stubbs, et al. Impact of Dust on Lunar Exploration, 2005

dust mitigation↗
NASA NTRSDate not supplied

Survive the Dust: Dust Mitigation Technology to Enable Survive the Night Capabilities

Introduction: As we return to the Moon, the lunar regolith (i.e. lunar dust) covering the surface will be an obstacle to nominal operations. Accounts from Apollo astronauts and analysis of hardware returned from the surface illustrate just how deleterious the dust can be [1]. During Apollo missions, the lunar dust adhered to hardware mechanically and electrostatically [2]. Surviving the Night: Mitigating the lunar dust will be critical to surviving the night. Going hand-in-hand with other extreme environment considerations, dust mitigation is critical to mission success. Dust Impacts on Other Systems: The lunar dust can have negative implications for power, thermal, mechanisms, and several other systems or sub-systems. For example, Apollo encountered marked degradation of performance in heat rejection systems for the lunar roving vehicle, science packages, and other components because of the lunar dust [1]. For power alone, dust can cause internal clogging for power connectors, heat rejection issues, excessive dust on reflective surfaces, reduced power output for solar arrays, and so on. Dust Mitigation Strategy: In addition to considering technology solutions, it is important for hardware, systems, and or components to have a dust mitigation strategy. At a high level, hardware that will encounter the lunar dust should consider these things when defining a dust mitigation strategy: • Understand Natural Environment • Understand Induced Environment • Understand Tolerance to Dust • Write Dust Requirements • Select Dust Mitigation Solutions • Test Hardware in Dusty Environment More information on each of these can be provided to hardware owners. Dust Mitigation Technology Development: NASA has a series of technologies that may be available for hardware that needs to survive the lunar night. Many of these solutions are leveraging dust mitigation technology development efforts from NASA’s Space Technology Mission Directorate (STMD), as well as efforts from ESDMD programs, industry, and academia. Through a series of STMD programs (both internal to NASA and through partnerships), there are several technologies in development as considerations as dust mitigation solutions for hardware. Within STMD, the Game Changing Development Program (GCD) has funded several internal dust mitigation projects including low to mid TRL development, demonstrations on CLPS landers of high TRL solutions, and creating standards and best practices for dust mitigation. STMD dust mitigation efforts also include a series of partnerships for developing technologies and advancing the state of dust mitigation at NASA. This includes the Lunar Surface Innovation Consortium (LSIC), Small Business Innovation Research, Early Stage Innovations (ESI), Space Technology Research Grants (STRG), Announcement of Collaboration Opportunities (ACOs) and Tipping Points (TPs), and Challenges and Crowdsourcing, among others. There are also a series of dust mitigation solutions that have been widely used terrestrially, or during Apollo. In recent years, several studies have produced more data on the efficacy of these potential solutions in the lunar environment. Dust Mitigation Solutions: Dust mitigation solutions generally fall into four categories: • Dust Tolerant Mechanisms • Passive Dust Mitigation Capabilities • Active Dust Mitigation Capabilities • Dust Measurement Capabilities There are a series of solutions that may prove beneficial for hardware that needs to survive the lunar night, including new technology development as well as proven, terrestrial solutions. This presentation will discuss in more detail what some of these solutions are for payloads going to the surface. References: [1] J. R. Gaier, NASA/TM—2005-213610, The Effects of Lunar Dust on EVA Systems During the Apollo Missions [2] T. J. Stubbs, et al. Impact of Dust on Lunar Exploration, 2005

dust mitigation↗
NASA NTRSDate not supplied

Experimental Considerations for Ground-based Testing of Lunar Construction Technologies

The Moon-to-Mars Planetary Autonomous Construction Technology (MMPACT) project, under NASA’s Game Changing Division (GCD) aims to research, develop, and demonstrate lunar surface construction capabilities[1].A fundamental step in lunar infrastructure development is to quantify the geotechnical properties of lunar regolith, such as shear strength (Mohr-Coulomb cohesion and angle of internal friction), com-pression and bearing properties, and angle of re-pose. Knowledge of these geotechnical properties enables the prediction of forces and displacements associated with lunar infrastructure development processes including excavation and constructing landing pads, habitats, shelters, and roadways. Through ground-based testing of autonomous lunar systems performed using relevant hardware (e.g., robotic arms) in appropriate lunar regolith simulants, the developed hardware/technology and tool paths can be validated. Such testing also generates data to give insight into the geotechnical regolith properties on the lunar surface.

Regolith↗
NASA NTRS2015

Ames Infusion Stories for NASA Annual Technology Report

These are short (2-page) high-level summaries of technologies that have been infused - i.e., taken the next level. For example, 3DMAT started off as a Center Innovation Fund (CIF) project and graduated to the Game-changing Program (GCD), where it is being prepared for use in Orion. The Nano Entry System similarly started as CIF and graduated to GCD. The High Tortuosity Carbon Dioxide Conversion Device also started off as CIF and then received an award for further development from the NASA Innovative Advanced Concepts program (NIAC).

Smith, Brandon↗
NASA NTRS2014

GCD TechPort Data Sheets Thermal Protection System Materials (TPSM) Project

The Thermal Protection System Materials (TPSM) Project consists of three distinct project elements: the 3-Dimensional Multifunctional Ablative Thermal Protection System (3D MAT) project element; the Conformal Ablative Thermal Protection System (CA-TPS) project element; and the Heatshield for Extreme Entry Environment Technology (HEEET) project element. 3D MAT seeks to design, develop and deliver a game changing material solution based on 3-dimensional weaving and resin infusion approach for manufacturing a material that can function as a robust structure as well as a thermal protection system. CA-TPS seeks to develop and deliver a conformal ablative material designed to be efficient and capable of withstanding peak heat flux up to 500 W/ sq cm, peak pressure up to 0.4 atm, and shear up to 500 Pa. HEEET is developing a new ablative TPS that takes advantage of state-of-the-art 3D weaving technologies and traditional manufacturing processes to infuse woven preforms with a resin, machine them to shape, and assemble them as a tiled solution on the entry vehicle substructure or heatshield.

HEEET↗
NASA NTRS2016

Development Challenges of Game-Changing Entry System Technologies From Concept to Mission Infusion

NASA's Space Technology Mission Directorate (STMD) and the Game Changing Development Program (GCDP) were created to develop new technologies. This paper describes four entry system technologies that are funded by the GCDP and summarizes the lessons learned during the development. The investments are already beginning to show success, mission infusion pathways after five years of existence. It is hoped that our experience and observations, drawn from projects supported by the GCD program/STMD, Orion and SMD can help current and future technology development projects. Observations on fostering a culture of success and on constraints that limit greater success are also provided.

Entry↗
NASA NTRSDate not supplied

Space Technology Mission Directorate - Game Changing Development Program - Vertical Solar Array Technology Project

The Vertical Solar Array Technology (VSAT) project is focused on the development of solar array technologies necessary for sustained presence on the lunar surface circa 2028. Existing solar array structures and deployment system technologies are designed for either zero-g or horizontal surface deployment. VSAT will explore vertical array deployment on extension masts of up to 10m in length in order to capture near continuous sun light at the lunar south pole.

GCD↗
NASA NTRSDate not supplied

Demonstration of Capability to Simulate Particle Irregular Shape and Poly-Disperse Mixtures Within Lunar Lander Plume-Surface Interaction

Plume-Surface Interaction (PSI) between lander engine plumes and regolith soil creates hazards in obscuration and contamination by particle clouds, high-energy ejecta streams, and landing area cratering damage. The MSFC Fluid Dynamics Branch is developing simulation tools to offer a predictive PSI capability to NASA customers such as the Human Lander System (HLS) and Commercial Lunar Payload Services (CLPS). The Gas-Granular Flow Solver (GGFS) is the main application tool for coupled gas-particle two-phase flow simulations to predict the range of PSI effects from onset of surface erosion to deep crater formation. GGFS features an Eulerian-Eulerian modeling approach, treating both gas and granular material as interacting continuum phases. Modeling the lunar regolith granular material fluidic characteristics poses special challenges due to complex particle shapes and mixture composition. The lunar regolith is poorly sorted with broad particle size distributions and large fines content. It has significant cohesion, due to interlocking jagged particle shapes. Eulerian granular material flow modeling requires closure formulations for the granular material constitutive models (stress, friction, collisional and kinetic energy dissipation, drag, etc.). While closure models for spherical particles are available from particle kinetic theory, closure models for realistic non-spherical particles must be extracted from unit physics Discrete Element Model (DEM) particle interaction simulations and provided in the form of tabular datasets. The effects of particle irregular shape (non-spherical shape factors, angular particle surface roughness, and interlocking features) are simulated by approximating the particle features in the form of grouped elemental spheres to form composite particles in the DEM simulations. The effects of the wide range of regolith mixture particle sizes and the strong effects of the presence of the small particle sizes results in high cohesion and low porosity of the regolith mixture. The range of particle sizes is simulated by binning the particle sizes into an appropriate finite number of particle-size species and solving the problem as a species mixture. Combining these two modeling approaches enables simulations to capture both, the contributions of the irregular particle shape and the particle size distribution. The integration and maturation of the DEM-based constitutive model database generation process and poly-disperse mixture binning approach into the GGFS simulation framework are proceeding under funding by the NASA Game Changing Development program. The status of current capabilities will be presented in comparisons of crater characteristics resulting for spherical and irregular shape particles, and for mono-, bi-, and tri-disperse mixture simulations of Apollo LM plume-surface interaction. The computational results confirm the significance of including the particle shape and mixture effects. Going forward plans for the full implementation of the general poly-disperse regolith modeling capability and maturation towards NASA project application readiness under the GCD program will be presented.

Peter A Liever↗
NASA NTRSDate not supplied

Demonstration of Capability to Simulate Particle Irregular Shape and Poly-Disperse Mixtures Within Lunar Lander Plume-Surface Interaction

Plume-Surface Interaction (PSI) between lander engine plumes and regolith soil creates hazards in obscuration and contamination by particle clouds, high-energy ejecta streams, and landing area cratering damage. The MSFC Fluid Dynamics Branch is developing simulation tools to offer a predictive PSI capability to NASA customers such as the Human Lander System (HLS) and Commercial Lunar Payload Services (CLPS). The Gas-Granular Flow Solver (GGFS) is the main application tool for coupled gas-particle two-phase flow simulations to predict the range of PSI effects from onset of surface erosion to deep crater formation. GGFS features an Eulerian-Eulerian modeling approach, treating both gas and granular material as interacting continuum phases. Modeling the lunar regolith granular material fluidic characteristics poses special challenges due to complex particle shapes and mixture composition. The lunar regolith is poorly sorted with broad particle size distributions and large fines content. It has significant cohesion, due to interlocking jagged particle shapes. Eulerian granular material flow modeling requires closure formulations for the granular material constitutive models (stress, friction, collisional and kinetic energy dissipation, drag, etc.). While closure models for spherical particles are available from particle kinetic theory, closure models for realistic non-spherical particles must be extracted from unit physics Discrete Element Model (DEM) particle interaction simulations and provided in the form of tabular datasets. The effects of particle irregular shape (non-spherical shape factors, angular particle surface roughness, and interlocking features) are simulated by approximating the particle features in the form of grouped elemental spheres to form composite particles in the DEM simulations. The effects of the wide range of regolith mixture particle sizes and the strong effects of the presence of the small particle sizes results in high cohesion and low porosity of the regolith mixture. The range of particle sizes is simulated by binning the particle sizes into an appropriate finite number of particle-size species and solving the problem as a species mixture. Combining these two modeling approaches enables simulations to capture both, the contributions of the irregular particle shape and the particle size distribution. The integration and maturation of the DEM-based constitutive model database generation process and poly-disperse mixture binning approach into the GGFS simulation framework are proceeding under funding by the NASA Game Changing Development program. The status of current capabilities will be presented in comparisons of crater characteristics resulting for spherical and irregular shape particles, and for mono-, bi-, and tri-disperse mixture simulations of Apollo LM plume-surface interaction. The computational results confirm the significance of including the particle shape and mixture effects. Going forward plans for the full implementation of the general poly-disperse regolith modeling capability and maturation towards NASA project application readiness under the GCD program will be presented.

Peter A. Liever↗