Search NASA⌕ Search

SEARCH · Search NASA

Results for “High-Rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Origin and evolution of X-ray binaries in globular clusters

The theoretical model developed by Grindlay (1984 and 1985) and Grindlay and Hertz (1985) to explain the relative numbers of low-luminosity and high-luminosity X-ray sources in Galactic globular clusters is briefly characterized, and the relevant observational evidence is summarized. In the model, high-rate mass transfer onto white dwarfs in about 1 percent of the low-luminosity binary sources produces neutron stars, which then form compact high-luminosity X-ray binaries (by tidal capture in the dense cluster cores); these in turn evolve into hierarchical triple systems. Evidence considered includes observations of the high-luminosity giant-fed X-ray binary in M 15, the results of searches for CVs in globulars, comparisons of X-ray-binary and host-globular evolution, and indications that GX 17 + 2 is a bound triple.

Grindlay, Jonathan E.↗
NASA NTRS1986

The engineering of the Voyager 2 mission to Uranus

The engineers of the Voyager 2 mission to Uranus had to deal with dwindling consumables, navigational challenges unique to the Uranian system, low light-level imaging, increasing communications problems, and failed equipment onboard the spacecraft, each of which could affect the success of the mission. The techniques for coping with each of these factors are discussed in detail. For instance, steadying of the spacecraft, achieved by cancelling the momentum change imparted to it by high-rate operations of the digital tape recorder, enhanced the data quality from several instruments, particularly the cameras. A careful power management scheme made it possible to conduct a successful radio occultation experiment which yielded detailed information on the Uranian atmospheric structure, including temperature and composition. A unique picture of the back-lit ring system was obtained.

Laeser, Richard P.↗
NASA NTRS1986

Plasticity analysis of wear phenomena as an aid in the development of abradable materials

Plastic deformation accompanying the wear process in fully dense and porous metals was studied in order to develop more abradable gas path seal material systems for turbine engine applications. The finite element method was used to model high-rate viscoplastic deformation in the vicinity of a moving contact. Techniques were developed for studying such deformation in both solid (fully dense) and porous metals. Results of the analysis were verified by comparison with experimental data obtained using a pendulum-type rub test apparatus and a pin-on-disk sliding wear tester. It was found that the near-surface plastic deformation in fully dense solids was different from that for porous materials because of the compressibility of the latter. Both types of materials exhibit deformation features which can be taken advantage of in the design of more abradable material systems.

Kennedy, F. E., Jr.↗
NASA NTRS1987

Technology - The basis for the past, the key to the future

The relationship between new technology and space missions, and the objectives of the Civil Space Technology Initiative (CSTI) are studied. The CSTI is concerned with technologies for safe and efficient access to space, earth-orbiting operations, and future science missions. The initiative focuses on research in the areas of propulsion, vehicles, information systems, large space structures and their control, power, and automation and robotics. Consideration is given to the development of high-performance engines for next-generation vehicles, booster technology for hybrid and pressure-fed propulsion systems, and a space OTV based on the aerobrake concept. Research involved with the application of automation and robotics to earth-orbiting operations are discussed. The control of flexible structure flight experiment, the use of nuclear systems for space propulsion, and the development of sensor devices and high-rate, high-capacity data systems are examined.

Harris, Leonard A.↗
NASA NTRS1988

Hardware realization of a baseband processor for a SS-FDMA/TDMA/DAMA system

Hardware implementation of the NASA ACTS baseband processor is described which achieves the system message data handling performance required to perform satellite switching of high-rate baseband data. The hardware meets payload specifications for size, weight, and power. Hardware redundancy applied to critical paths in several functional areas insures that the reliability and life expectancy requirements are fulfilled. The remote reprogrammability of the processor message data handling and routing functions provides system flexibility for dynamic reconfiguration during rapidly changing traffic loads.

Moat, Richard L.↗
NASA NTRS1988

The decoding of Reed-Solomon codes

Reed-Solomon (RS) codes form an important part of the high-rate downlink telemetry system for the Magellan mission, and the RS decoding function for this project will be done by DSN. Although the basic idea behind all Reed-Solomon decoding algorithms was developed by Berlekamp in 1968, there are dozens of variants of Berlekamp's algorithm in current use. An attempt to restore order is made by presenting a mathematical theory which explains the working of almost all known RS decoding algorithms. The key innovation that makes this possible is the unified approach to the solution of the key equation, which simultaneously describes the Berlekamp, Berlekamp-Massey, Euclid, and continued fractions approaches. Additionally, a detailed analysis is made of what can happen to a generic RS decoding algorithm when the number of errors and erasures exceeds the code's designed correction capability, and it is shown that while most published algorithms do not detect as many of these error-erasure patterns as possible, by making a small change in the algorithms, this problem can be overcome.

Mceliece, R. J.↗
NASA NTRS1989

Rebuilding the space technology base

NASA's Civil Space Technology Initiative (CSTI) will not only develop novel technologies for space exploration and exploitation, but also take mature technologies into their demonstration phase in earth orbit. In the course of five years, CSTI will pay off in ground- and space-tested hardware, software, processes, methods for low-orbit transport and operation, and fundamental scientific research on the orbital environment. Attention is given to LOX/hydrogen and LOX/hydrocarbon reusable engines, liquid/solid fuel hybrid boosters, and aeroassist flight experiments for the validation of aerobraking with atmospheric friction. Also discussed are advanced scientific sensors, systems autonomy and telerobotics, control of flexible structures, precise segmented reflectors, high-rate high-capacity data handling, and advanced nuclear power systems.

Povinelli, Frederick P.↗
NASA NTRS1989

High rate concatenated coding systems using bandwidth efficient trellis inner codes

High-rate concatenated coding systems with bandwidth-efficient trellis inner codes and Reed-Solomon (RS) outer codes are investigated for application in high-speed satellite communication systems. Two concatenated coding schemes are proposed. In one the inner code is decoded with soft-decision Viterbi decoding, and the outer RS code performs error-correction-only decoding (decoding without side information). In the other, the inner code is decoded with a modified Viterbi algorithm, which produces reliability information along with the decoded output. In this algorithm, path metrics are used to estimate the entire information sequence, whereas branch metrics are used to provide reliability information on the decoded sequence. This information is used to erase unreliable bits in the decoded output. An errors-and-erasures RS decoder is then used for the outer code. The two schemes have been proposed for high-speed data communication on NASA satellite channels. The rates considered are at least double those used in current NASA systems, and the results indicate that high system reliability can still be achieved.

Deng, Robert H.↗
NASA NTRS1989

Characterization testing of a 40 AHR bipolar nickel-hydrogen battery

Extensive characterization testing has been done on a second 40 amp-hour (Ahr), 10-cell bipolar nickel-hydrogen (Ni-H2) battery to study the effects of such operating parameters as charge and discharge rates, temperature, and pressure, on capacity, Ahr and watt-hour (Whr) efficiencies, end-of-charge (EOC) and mid-point discharge voltages. Testing to date has produced many interesting results, with the battery performing well throughout all of the test matrix except during the high-rate (5C and 10C) discharges, where poorer than expected results were observed. The exact cause of this poor performance is, as yet, unknown. Small scale 2 x 2 inch battery tests are to be used in studying this problem. Low earth orbit (LEO) cycle life testing at a 40 percent depth of discharge (DOD) and 10 C is scheduled to follow the characterization testing.

Brewer, Jeffrey C.↗
NASA NTRS1989

Extended solubility and stability in vapor quenched Ni3Al-X intermetallics

A series of fine-grain and amorphous Ni3Al-X alloys, where X is a solute of 1 to 45 at. pct hf, C, or Hf+C in continuously graded compositions, was formed simultaneously into a 0.2 mm-thick disk by high-rate sputter codeposition. The as-deposited Ni3Al-X alloys exhibited a disordered L1(2) structure and extended solid solubility limits beyond which amorphous phases were formed. Heat-treatment of the alloys at 900 C resulted in fine grain size of 0.5 micron to 1.5 microns. Ultra fine dispersoids less than 500 A in size were observed, and they seemed resistant to coarsening.

Wang, Rong↗
NASA NTRS1990

Characterization testing of a 40 ampere hour bipolar nickel-hydrogen battery

Extensive characterization testing has been done on a second 40-ampere hour (A h), 10-cell, bipolar nickel-hydrogen (Ni-H2) battery, to study the effects of operating parameters such as charge and discharge rates, temperature, and pressure on capacity, A h and watt hour (W h) efficiencies, and end-of-charge and midpoint discharge voltages. Testing to date has produced many interesting results, with the battery performing well throughout the test matrix except during the high-rate (5 C and 10 C) discharges, where poorer than expected results were observed. The exact cause of this poor performance is, as yet, unknown. Small scale 2 in. x 2 in. battery tests are to be used in studying this problem. Low earth orbit cycle life testing at a 40-percent depth of discharge and 10 C is scheduled to follow the characterization testing.

Brewer, Jeffrey C.↗
NASA NTRS1990

Human exploration - Moon/Mars mission

The Space Eploration Initiative launched by the Bush Administration in May, 1990, will intensively explore alternative mission architectures involving the use of the moon as a staging post for manned exploration of Mars. The advanced technologies to be analyzed by the 'Pathfinder' program for prospective use in the alternative missions thus far defined encompass aerobraking, space-based chemical engines, cryogenic fluid systems, space nuclear power, nuclear-thermal and nuclear-electric propulsion, high-rate communications, and planetary photonics. Extensive use of robotics is anticipated in both the lunar and Martian components of the missions being studied.

O'Handley, Douglas A.↗
NASA NTRS1991

Development of a 300 Amp-hr high rate lithium thionyl chloride cell

The development of a high-rate lithium thionyl chloride cylindrical cell with parallel plate electrodes is discussed. The development was divided into three phases: phase 1, a 150 Amp/hour low rate (1 mA/sq cm) design; phase 2, a 25 Amp/hour high rate (5 mA/sq cm) design; and phase 3, a 300 Amp/hour high rate (5 mA/sq cm) design. The basic design is the same for all three cells. The electrodes are perpendicular to the axis of the cylinder. Multiple electrodes are bussed up the side of the cylinder, 180 deg apart allowing excellent anode and cathode utilization. It is a lithium limited design with excess electrolyte. The cathode is Shawinigan or Gulf Acetylene black with no catalyst. The electrolyte is 1.8 Molar lithium tetrachloroaluminate (LiAlCl4) in thionyl chloride. All cell cases are 304L Stainless Steel with a BS&B burst disc.

Boyle, Gerard H.↗
NASA NTRS1990

Frame synchronization at 300 Mbps and beyond

A prototype frame synchronizer card and its supporting VLSI components under development at the Goddard Space Flight Center that will operate at a minimum 300 Mbps while providing a full suite of programmable functions are presented. Cumulative quality data generation, onboard self diagnostics, and status/control processing are all integrated in this single card design. Consideration is given to the telemetry frame synchronizer subsystem and high-rate frame synchronizer specifications.

Wunderlich, Kristin↗
NASA NTRS1993

Asynchronous transfer mode link performance over ground networks

The results of an experiment to determine the feasibility of using asynchronous transfer mode (ATM) technology to support advanced spacecraft missions that require high-rate ground communications and, in particular, full-motion video are reported. Potential nodes in such a ground network include Deep Space Network (DSN) antenna stations, the Jet Propulsion Laboratory, and a set of national and international end users. The experiment simulated a lunar microrover, lunar lander, the DSN ground communications system, and distributed science users. The users were equipped with video-capable workstations. A key feature was an optical fiber link between two high-performance workstations equipped with ATM interfaces. Video was also transmitted through JPL's institutional network to a user 8 km from the experiment. Variations in video depending on the networks and computers were observed, the results are reported.

Chow, E. T.↗
NASA NTRS2026

Manufacturing Process Development of a Carbon Fiber Reinforced Polymer Composite Shaft for Electric Motors

Electric aircraft applications require electric motors with increased specific power and efficiency. Composite structural components in motors are a potential solution for reducing motor mass, reducing magnetic losses, and limiting undesired conduction paths for fault, electromagnetic interference, or common-mode currents. In this report, manufacturing trials for a high-speed carbon fiber reinforced polymer composite motor shaft are presented. Four prototype shafts were produced using a hybrid biaxial/triaxial fabric that was circumferentially wrapped onto an additively manufactured high-temperature washout mandrel. An additional traditional overbraid approach was also evaluated and shows promise for high-rate, high-performance parts using automated manufacturing. This paper discusses the shaft design, manufacturing methods explored, material selection, the manufacturing trials, and the lessons learned. The results of this manufacturing investigation show feasibility for manufacturing composite shafts for electric motors.

Electric moto shaft↗
NASA NTRS2026

Fatigue Life of Flow-Formed Aluminum 2195 and 6061 Alloys

The successful design and fabrication of metallic cryotanks for commercial aviation applications require lightweight, durable materials capable of withstanding high pressures and cryogenic temperatures through tens of thousands of thermomechanical refueling cycles. Flow forming is an advanced manufacturing technique that offers high-rate production and scalability for fabricating integrally stiffened cylinders suitable for cryotank applications. This work establishes the durability of flow-formed aluminum alloys by characterizing their fatigue life performance under conditions that mimic cryotank refueling cycles. Residual stresses in flow-formed aluminum-lithium (Al-Li) 2195-T6 cylinders were assessed using the contour method and found to be minimal. Fatigue life testing was conducted on flow-formed Al-Li 2195-T6 at room temperature and cryogenic temperatures (-321°F [-196°C]), with wrought Al-Li 2195-T6 serving as a baseline for comparison. Results showed that flow-formed materials exhibited fatigue performance comparable to or better than wrought materials, with no statistically significant differences observed between different specimen orientations relative to processing directions. Fractography revealed reduced delaminations in the flow-formed Al-Li 2195 samples as compared to wrought, indicating potential improvement to the microstructure that could result in improved service properties. Texture analysis using electron backscattered diffraction (EBSD) indicated recrystallization during heat treatment, potentially contributing to reduced delamination susceptibility. These findings demonstrating flow-formed material durability coupled with the high manufacturing efficiency of flow forming, makes flow forming an attractive process to produce aircraft cryotanks.

EBF3↗
NASA NTRSDate not supplied

NASA's Small Spacecraft and Distributed Systems: Development and Demonstration of Technologies Enabling Swarms and New Spacecraft Platforms with AI and Edge Computing

NASA’s Small Spacecraft & Distributed Systems (SSDS) within the Research and Technology Mission Directorate (RTMD) expands U.S. capability to execute unique missions through targeted investment, rapid development, and flight demonstration of small spacecraft technologies applicable to exploration, science and the commercial space sector. SSDS strategically invests in technology development and on-orbit demonstrations executed across NASA, other government agencies, industry, and academia. The program’s University SmallSat Technology Partnerships initiative awards academic researchers with the opportunity to collaborate with NASA to mature innovative technology. Capabilities aligned with RTMD’s technology shortfalls and interests - power, processing, propulsion, sensors, communications, autonomous navigation, architectures, and advanced applications like artificial intelligence (AI), machine learning, and edge computing - are prioritized in SSDS investments. These investments enable distributed, autonomous, and cooperative small spacecraft systems that support swarm missions extending beyond low Earth orbit into cislunar and deep space. This paper highlights representative SSDS flight demonstrations that mature these capabilities to enable a future operational infrastructure needed to support sustained exploration of the Moon and beyond. SSDS’s investment strategy emphasizes rapid development and on-orbit demonstration to validate spacecraft technologies required for swarms and distributed mission architectures. The Starling swarm technology demonstration mission exemplifies this approach by advancing distributed spacecraft autonomy, cooperative operations, and space situational awareness. Extended flight testing and ongoing studies of next generation swarm configurations and on-orbit space traffic monitoring and management continue to inform future swarm designs. DiskSat’s four-spacecraft demonstration mission represents SSDS’s strategic vision to expand the design space for future small spacecraft through its commitment to advance novel platform concepts that can impact how science is performed on orbit. Continuing to invest in future platforms, the notional PY12 concept is a 12-spacecraft swarm hosting neuromorphic processors and is envisioned as an on-orbit testbed for AI, edge computing, and positioning, navigation and timing technologies. SSDS also invests in single-spacecraft technology demonstrations that underpin the success of future swarm missions and accelerate the availability of validated technologies across the small spacecraft ecosystem. Examples of such demonstrations include Pathfinder Technology Demonstrator-3 (PTD-3), which performed high-rate optical communications; PTD-R, which demonstrated a camera capable of simultaneous ultraviolet and short-wave infrared optical sensing; and CAPSTONE, the Cislunar Autonomous Positioning System Technology and Operations Navigation Experiment, which validated autonomous navigation in cislunar space. Collectively, SSDS-funded demonstrations advance capabilities across swarms and illustrate a coordinated investment strategy to mature high-impact technologies required for autonomous, distributed, and cooperative small spacecraft systems for low Earth orbit, cislunar, and deep space applications. Technology demonstrations strengthen SSDS partnerships with industry, academia, and other government agencies, and promote small spacecraft community adoption of capabilities required to close technical gaps for swarm missions.

Jan Stupl↗