SEARCH · Search NASA

Results for “Lignin removal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Utilization of guaiacol-based deep eutectic solvent for achieving a sustainable biorefinery

This study proposed a renewable deep eutectic solvent (DES) pretreatment using lignin-derived guaiacol as the hydrogen bond donor. The DES showed excellent biomass fractionation efficiency after the incorporation of trace AlCl 3 as the reinforcer, which removed 79.1 % lignin while preserving more than 90 % glucan. The pretreated bamboo exhibited 96.2 % glucan enzymatic hydrolysis yield at only 110 °C. The physicochemical properties of the pretreated solids were comprehensively investigated to explain how the DES fractionation overcame the biomass recalcitrance. The regenerated lignin from the DES pretreatment was also analyzed, which revealed that lignin β-O-4 bond was significantly cleaved. In conclusion, this guaiacol-based DES could greatly contribute to establish a closed-loop biorefinery sequence with high lignin fractionation efficiency and great solvent recyclability.

09 BIOMASS FUELS↗

DOE OSTI2024

Lignin impairs Cel7A degradation of in vitro lignified cellulose by impeding enzyme movement and not by acting as a sink

Abstract Background Cellulose degradation by cellulases has been studied for decades due to the potential of using lignocellulosic biomass as a sustainable source of bioethanol. In plant cell walls, cellulose is bonded together and strengthened by the polyphenolic polymer, lignin. Because lignin is tightly linked to cellulose and is not digestible by cellulases, is thought to play a dominant role in limiting the efficient enzymatic degradation of plant biomass. Removal of lignin via pretreatments currently limits the cost-efficient production of ethanol from cellulose, motivating the need for a better understanding of how lignin inhibits cellulase-catalyzed degradation of lignocellulose. Work to date using bulk assays has suggested three possible inhibition mechanisms: lignin blocks access of the enzyme to cellulose, lignin impedes progress of the enzyme along cellulose, or lignin binds cellulases directly and acts as a sink. Results We used single-molecule fluorescence microscopy to investigate the nanoscale dynamics of Cel7A from Trichoderma reesei , as it binds to and moves along purified bacterial cellulose in vitro. Lignified cellulose was generated by polymerizing coniferyl alcohol onto purified bacterial cellulose, and the degree of lignin incorporation into the cellulose meshwork was analyzed by optical and electron microscopy. We found that Cel7A preferentially bound to regions of cellulose where lignin was absent, and that in regions of high lignin density, Cel7A binding was inhibited. With increasing degrees of lignification, there was a decrease in the fraction of Cel7A that moved along cellulose rather than statically binding. Furthermore, with increasing lignification, the velocity of processive Cel7A movement decreased, as did the distance that individual Cel7A molecules moved during processive runs. Conclusions In an in vitro system that mimics lignified cellulose in plant cell walls, lignin did not act as a sink to sequester Cel7A and prevent it from interacting with cellulose. Instead, lignin both blocked access of Cel7A to cellulose and impeded the processive movement of Cel7A along cellulose. This work implies that strategies for improving biofuel production efficiency should target weakening interactions between lignin and cellulose surface, and further suggest that nonspecific adsorption of Cel7A to lignin is likely not a dominant mechanism of inhibition.

09 BIOMASS FUELS↗

DOE OSTI2024

Lignin molecular weights of Populus trichocarpa residues after CELF pretreatment

Here we present a dataset of molecular weights of lignin from a woody energy crop (Populus trichocarpa) residues after a series of co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment. The natural poplar variant GW-9947 from the Center for Bioenergy Innovation (CBI) was used. The poplar was knife milled and passed through a 1 mm sieve and CELF pretreatment was performed in a Parr autoclave reactor with 7.5 wt % solids loading, 0.5 wt% H2SO4 as catalyst at 150°C with various time. Tetrahydrofuran was added in a 1:1 mass ratio with water as the pretreatment solvent. Lignin was isolated from the pretreated samples after ball-milling in a porcelain jar with ceramic balls via Retsch PM 200 at 580 rpm for 2.5 h followed by enzymatic hydrolysis in acetate buffer (pH 4.8, 50 °C) for 48 h. The solid residue was isolated by centrifugation and hydrolyzed again with freshly added buffer and enzymes for another 48 h. After filtration, the solid residue was extracted twice with 96% (v/v) 1,4-dioxane/water mixture at room temperature overnight. The extracts were combined, rotary evaporated, and freeze-dried to recover lignin. The lignin samples were then derivatized in an acetic anhydride/pyridine (1:1, v/v) mixture and stirred at room temperature for 24 h. Ethanol was added to the reaction mixture, left for 30 min and then removed with a rotary evaporator. The addition and removal of ethanol was repeated at least 3 times until all traces of acetic acid were removed. Acetylated lignin samples were then dissolved in tetrahydrofuran (THF) at a concentration of 1.0 mg/mL. The molecular weight of acetylated lignin was measured by a gel permeation chromatography (GPC) on a PSS-Polymer Standards Service (Warwick, RI, USA) GPC SECurity 1200 system featuring Agilent HPLC 1200 components equipped with four Waters Styragel columns (HR1, HR2, HR4 and HR6) and an UV detector (270 nm). Tetrahydrofuran was used as the mobile phase and flow rate was 0.3 mL/min. The Polymer Standards Service WinGPC Unity software (Build 6807) was used for data processing for all the samples. The data provides information about the effects of CELF pretreatment time at 150 ºC on lignin molecular weights.

09 BIOMASS FUELS↗

DOE OSTI2025

Manufacturing of Continuous Microporous Polymeric Fibers for Separation Applications

Polyolefin plastic waste, particularly polypropylene, is one of the most prevalent components in the plastic waste stream generated globally. However, only a small fraction of this waste is recycled and reintegrated into second applications. These materials have significant embedded energy that could be used for additional productivity if recycled properly. Therefore, there is a critical need to develop scalable processing techniques with high throughput to effectively recycle it. We report the continuous manufacturing of microporous fibers using waste polypropylene plastic and melt-processable lignin, a plant biomass constituent produced as a byproduct in paper mills or biorefineries, as a template to create pores. Further, these filaments with hierarchical porosity─created by controlled microphase separation during high-speed extensional flow followed by removal of lignin─exhibit exceptional capillary action for hydrophobic liquids. The resulting porous fibers can be used for various separation applications. For example, the oil uptake of the fibers is 9.59 ± 0.82 g/g for applications in oil recovery in bodies of water. In addition, polyethylenimine infiltration within these nanoporous fibers introduces cyclic room temperature sorption and thermal desorption potential of acidic gases such as CO 2 in a bench-scale experiment. The fibers exhibit multiple cycles of CO 2 absorption, with a range of 0.15 to 0.17 mmol/g. Thus, these polyethylenimine-infiltered nanoporous polypropylene fibers can also be used in removing acidic gases from a gas mixture.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Use of Ionic Liquids for Hemp Fiber Degumming

Degumming or retting to remove pectin, lignin, and hemicellulose is a critical step in the production of high-quality hemp fibers. Current technologies, including traditional water or dew retting, as well as chemical, enzymatic, and physical degumming processes, have inherent environmental risks and produce fibers of varying qualities. Herein we explore the use of an ionic liquid (IL) capable of dissolving pectin, lignin, and hemicellulose, but not cellulose, in combination with different oxidating agents to degum hemp. In this study, we observed that treating raw hemp fibers with the IL choline acetate ([Cho][OAc]), alone or in combination with aqueous H 2 O 2 , led to a reduction in the gummy materials and lignin content of the resulting samples of up to 63 and 78%, respectively. More importantly, the high crystallinity and low reduction in tensile strength of the resulting fibers make these novel and relatively simple IL-based processes promising alternatives toward the sustainable preparation of hemp-based materials suitable for use in the textile industry.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1997

Mechanism and potential applications of bio-ligninolytic systems in a CELSS

A large amount of inedible plant material, generated as a result of plant growth in a Controlled Ecological Life Support System (CELSS), should be pretreated and converted into forms that can be recycled on earth as well as in space. The main portion of the inedible biomass is lignocellulosic material. Enzymatic hydrolysis of this cellulose would provide sugars for many other uses by recycling carbon, hydrogen, oxygen, and nitrogen through formation of carbon dioxide, heat, and sugars, which are potential foodstuffs. To obtain monosaccharides from cellulose, the protective effect of lignin should be removed. White-rot fungi degrade lignin more extensively and rapidly than other microorganisms. Pleurotus ostreatus degrades lignin effectively, and produces edible and flavorful mushrooms that increase the quality and nutritional value of the diet. This mushroom is also capable of metabolizing hemicellulose, thereby providing a food use of this pentose containing polysaccharide. This study presents the current knowledge of physiology and biochemistry of primary and secondary metabolisms of basidiomycetes, and degradation mechanism of lignin. A better understanding of the ligninolytic activity of white-rot fungi will impact the CELSS Program by providing insights on how edible fungi might be used to recycle the inedible portions of the crops.

Review↗

DOE OSTI2021

BETO 2021 Peer Review - Enzyme Engineering and Optimization (EEO)

The FY2020 SOT economic model for the DMR BDO process indicates that the production and use of biomass degrading enzymes represents ~10% of the MFSP of BDO. We are thus working to enhance the performance of the dominant cellulase enzyme, Cel7A. In Fy2018-19, we selected 100 promising genes from the "Cel7A wheel of life" and cloned them into T. reesei using a constitutive promotor. This natural diversity screening resulted in the discovery of several enzymes exhibiting improved characteristics relative to the industry standard Cel7A from T. reesei (Tr). Growth of the transformed host on glucose insured that the Cre1 induced cellulase expression cascade was suppressed, thus enabling purification of the target gene product. The first top performing enzyme found was from P. funiculosum (Pf). Other top performing enzymes were identified from T. aculeatus, T. terrestris, and A. oryzae. Computational modeling predicted the structural subsites responsible for the improvements, which were cloned into the sequence of PfCel7A. The recombinant enzymes were expressed in T. reesei, purified, and tested. Testing was not possible with SOT relevant substrates, so the best-case substrate was used; solids from the DMR process subjected to a novel dilute alkaline wash to remove the "lignin shield." Two chimeric Cel7A enzymes show improved performance (1.2 to 1.35x) relative to PfCel7A, which in turn showed considerable improvement (1.6x) relative to T. reesei Cel7A. These new enzymes have been provided to our industrial partner for evaluation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2023

One-pot generation of lignin microspheres and digestible substrate with a polyol-DES pretreatment in high solid loading

Previous lignin microspheres (LMS) preparation needs multiple steps with very low yield and high cost. Herein, we developed a high-solid deep eutectic solvent (DES) pretreatment for an effective lignin fractionation and enzymatic saccharification of moso bamboo under mild temperature (110 °C) with high-solid loading. Lignin was significantly removed from the plant cell wall, and cellulose properties (e.g., crystallinity and degree of polymerization) were also altered during the pretreatment. As a result, the enzymatic digestibility of the pretreated bamboo was dramatically increased. Uniform micro-spherical lignin was directly produced from the pretreatment system, and its particle size could be regulated by controlling the solid loadings and pretreatment temperatures. The lignin microspheres formation mechanism was investigated by analyzing the lignin's size distribution, molecular weight distribution, chemical structure, and hydrophobicity. The DES showed excellent recyclability, and the recycled DES could still remove 42.78% lignin even after 7th circulation associated with 100% glucan saccharification. Further, the mass balance based on 1000 g biomass showed that 196.28 g LMS was directly recovered, which exhibited a high RhB adsorption. Besides, 404.91 g glucose and 36.67 g xylose were obtained after the enzymatic saccharification process. Specifically, GAPI analysis exhibited a near total green and yellow portions of the pictogram, indicating our DES process was green enough to make this biorefinery sustainable. Overall, the proposed DES generated synergistic productions of digestible solid and LMS which could contribute to establish a green and sustainable biorefinery sequence with diverse outputs in one pot.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Energy-Efficient Microbial Electrochemical Lignin and Alkaline Hydroxide Recovery from DMR Black Liquor

Black liquor is a complex waste stream generated from the fast-expanding biorefinery industry, and the high management cost has been known as a major development barrier. In this work, we demonstrated a rationally designed 4-chamber microbial electrolysis process that was capable of recovering the value-added lignin, NaOH, and H2 products while removing waste organics from the Deacetylation and Mechanical Refining (DMR) black liquor, which could potentially reduce the disposal cost by up to 40%. The lab-scale MEC achieved 52% organic removal from a highly concentrated feedstock (28,960 ± 212 mg/L COD) and recovered 83.2 mM NaOH under a small voltage application (1.2 V). Lignin recovery was observed to be as high as 13.98 +/- 0.28 g/L, and 0.35 L/L/day H2 was produced with a faradaic efficiency of 93.5%. This work provided a good example on how complex liquid waste stream can be valorized via multi-functional microbial electrochemical technology, and how the traditionally unfavored pH gradient in an electrochemical reactor can be manipulated for lignin precipitation and alkaline recovery at the same time. The versatility and good performance in concurrent contaminants removal, lignin precipitation, H2 production and NaOH recovery demonstrate a good potential for microbial electrolysis in black liquor treatment.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

DOE OSTI2022

Lignin-Derived Magnetic Activated Carbons for Effective Methylene Blue Removal

Large-scale environmental remediation of polluted water requires an effective and recyclable adsorbent produced from an abundant, low-cost, and renewable feedstock via a simple processing procedure. In this work, we demonstrate that lignin-derived magnetic activated carbons (mACs) uniquely satisfy these five criteria for (i) high-performance adsorption, (ii) high regeneration efficiency, (iii) feedstock economic and environmental viability, (iv) single-step processing and (v) large-scale production. The mACs are synthesized via an efficient co-carbonization and activation with simultaneous impregnation of ferric sulfate. Here, the Langmuir model closely fits the adsorption of methylene blue (MB) by mACs within the temperature range of 298–323 K, where the adsorption capacity increases as temperature increases. This capacity increased from 55.0 mg g -1 to 220.2 mg g -1 with the presence of magnetic nanoparticles. In addition, the magnetite nanoparticles on the ACs surface significantly improve its recycling ability with the removal percentage above 95% after four cycles for 5:1 mAC.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2023

Efficient Fast Fractionation of Biomass Using a Diol-Based Deep Eutectic Solvent for Facilitating Enzymatic Hydrolysis and Obtaining High-Quality Lignin

Current DES pretreatment is often performed under relatively severe conditions with high temperature, long time, and high DES usage. This work studied a short-time diol DES (deep eutectic solvent) pretreatment under mild conditions to fractionate the bamboo, facilitate enzymatic hydrolysis, and obtain high-quality lignin. At an optimized condition of 130 °C for only 10 min, lignin and xylan removal reached 61.34% and 84.15 %, with residual glucan showing a ~90% enzymatic hydrolysis yield. Equally important, the dissolved lignin could be readily recovered with 97.51% yield, exhibiting 96.65 % β-O-4 preservation. The fractionation and lignin protection mechanisms were unveiled by XRD, FTIR, cellulose-DP, 2D HSQC NMR, 31 P NMR and GPC analysis. Finally, this study highlighted that short-time fractionation of bamboo can be achieved by a diol-based DES which is an ideal strategy to upgrade the lignocellulose biomass for high enzymatic hydrolysis yields and high-quality lignin stream.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Ferric chloride aided peracetic acid pretreatment for effective utilization of sugarcane bagasse

The synergetic impacts of ferric chloride aided peracetic acid (FPA) pretreatment were investigated to enhance the total biomass utilization through effective cellulose conversion and high-quality lignin production. The sugarcane bagasse pretreatment with 2% peracetic acid (PAA) and 0.1 mol/L ferric chloride (FeCl 3 ) effectively removed 57.3% of lignin and 72.2% of xylan while preserving ~ 97% of cellulose from sugarcane bagasse under mild temperature (90 °C). The FPA pretreated sugarcane bagasse was effectively hydrolyzed with a glucose yield of 313.0 mg/g-biomass, which was 4.5 times higher than the yield of untreated biomass (69.75 mg/g-biomass) and 1.6 and 3.6 times higher than that of individual PAA and FeCl 3 pretreated sugarcane bagasse, respectively. The regenerated lignin (FPA lignin) showed great potential for further valorization by preserving the major interunit linkage (up to 86% of β-O-4) without significant carbohydrate contamination and lignin condensation due to its mild reaction conditions. In this paper, the combination of PAA and FeCl 3 synergistically enhanced the pretreatment efficiency on sugarcane bagasse and resulted in high fermentable sugar and high-quality lignin production.

09 BIOMASS FUELS↗

DOE OSTI2021

Engineered Sorghum Bagasse Enables a Sustainable Biorefinery with p-Hydroxybenzoic Acid-Based Deep Eutectic Solvent

Integrating multidisciplinary research in plant genetic engineering and renewable deep eutectic solvents (DESs) can facilitate a sustainable and economic biorefinery. In this work, we leveraged a plant genetic engineering approach to specifically incorporate C6C1 monomers into the lignin structure. By expressing the bacterial ubiC gene in sorghum, p-hydroxybenzoic acid (PB)-rich lignin was incorporated into the plant cell wall while this monomer was completely absent in the lignin of the wild-type (WT) biomass. A DES was synthesized with choline chloride (ChCl) and PB and applied to the pretreatment of the PB-rich mutant biomass for a sustainable biorefinery. The release of fermentable sugars was significantly enhanced (~190 % increase) compared to untreated biomass by the DES pretreatment. In particular, the glucose released from the pretreated mutant biomass was up to 12 % higher than that from the pretreated WT biomass. Lignin was effectively removed from the biomass with the preservation of more than half of the β-Ο-4 linkages without condensed aromatic structures. Hydrogenolysis of the fractionated lignin was conducted to demonstrate the potential of phenolic compound production. In addition, a simple hydrothermal treatment could selectively extract PB from the same engineered lignin, showing a possible circular biorefinery. These results suggest that the combination of PB-based DES and engineered PB-rich biomass is a promising strategy to achieve a sustainable closed-loop biorefinery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Effect of H 2 O on the ethylene glycol/alkali dismantling of bagasse for high-value conversion

Using a high-boiling alcohol system to dismantle main components of biomass is a feasible technology. Reducing dismantle operating costs and improving dismantle efficiency are essential for promoting the green, economical, and sustainable development of biomass refining. Therefore, based on the low cost and chemical properties of H 2 O at high temperature, the effects of different H 2 O dosages in NaOH-catalyzed ethylene glycol (HBAA) system on the dismantling efficiency of bagasse, surface lignin coverage, recovered-lignin activity and enzymatic hydrolysis efficiency were investigated. Compared with the HBAA dismantling system without H 2 O, the HBAA system with 60% w/v H 2 O can obviously increase the removal rates of lignin and hemicellulose, while recovering up to 99% of cellulose and significantly declining surface lignin coverage, thus enhancing the enzymatic hydrolysis efficiency. Additionally, the results of density functional theory calculations and 2D HSQC NMR analysis prove that the synergy between H 2 O and ethylene glycol can promote the esterification reaction occurrence at the α-C carbon cation in β-O-4 structure of lignin, thereby protecting the β-O-4 aromatic ether bond. Simultaneously, when the H 2 O dosage increase from 0% to 60%, the enzymatic yield increases from 84.51% to 93.74% with an enzyme load of 10 FPU/g. Based on experimental results, this study conducted a techno-economic analysis of bagasse dismantling for ethanol and co-production of lignin, achieving a minimum ethanol selling price of $\$$1.07 per kg. Here, in this study, a green and economical solution for dismantling the main components of bagasse is developed, which is important for the high-value conversion of bagasse.

Ethylene glycol↗

DOE OSTI2021

Facilitating enzymatic hydrolysis with a novel guaiacol-based deep eutectic solvent pretreatment

In this work, we established a novel deep eutectic solvent (DES) using lignin-derived guaiacol as hydrogen bond donor (HBD). The sole ChCl/guaiacol system was found to be inefficient for the fractionation of wheat straw (WS), while the incorporation of trace AlCl 3 significantly facilitated the degradation of hemicellulose and lignin, resulting in a complete enzymatic digestibility of the pretreated WS. Further, this study revealed that the DES-degraded lignin was readily precipitated during the washing process, and thus hindered the enzymatic hydrolysis of poplar and bamboo (with hydrolysis yield of 42.03% and 71.67%, respectively). Alkali washing offers a possible approach to remove the precipitated lignin, after which a near 100% hydrolysis yield was also obtained for poplar and bamboo.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Production of levulinic acid and biocarbon electrode material from corn stover through an integrated biorefinery process

To overcome the inefficient biomass conversion, waste generation, and lack of co-production in biorefineries, an integrated process was proposed for the conversion of corn stover into levulinic acid and biocarbon electrode material. Corn stover was pretreated through hydrothermal process using 0.45 wt% K 2 CO 3 which removed 76 wt% lignin and 85 wt% xylan while preserving 83 wt% glucan. This was followed by acid hydrolysis to produce levulinic acid at varying H 2 SO 4 concentrations and reaction time in a batch reactor at 190 °C. At a reaction time of 5 min in 2 wt% H 2 SO 4 , 35.8 wt% and 30 wt% glucan in raw and pretreated corn stover was converted to levulinic acid, respectively. The residue from acid hydrolysis was converted into biocarbon for supercapacitor electrodes via a two-step thermal activation process which showed a specific capacitance of 120 F g -1 . The proposed integrated biorefinery concept provides multiple value-added products for a greater financial and environmental sustainability.

09 BIOMASS FUELS↗

DOE OSTI2025

Integrating catalytic fractionation and microbial funneling to produce 2-pyrone-4,6-dicarboxylic acid and ethanol

Replacing biorefinery designs that use stepwise fractionation, depolymerization, and conversion processes with designed tandem process steps can greatly reduce a biorefinery's operating costs and environmental impact. Reductive Catalytic Fractionation (RCF) is a highly efficient lignin-first approach that combines biomass fractionation and lignin depolymerization to generate a hydrogenolysis oil and pulp. The oil is composed of a complex mixture of phenolic monomers, dimers, and oligomers. Intergrating this chemical deconstruction process with microbial funneling of phenolics can simplify the product mixture and make high-value products. We applied RCF to poplar biomass in a biomass-to-bioproduct processing chain in which the phenolics were funneled to 2-pyrone-4,6-dicarboxylic acid (PDC) by an engineered strain of Novosphingobium aromaticivorans DSM12444. The pulp was enzymatically digested and the glucose and xylose was funneled to ethanol by an engineered strain of Saccharomyces cerevisiae GLBRCY945. By combining biomass fractionation and lignin depolymerization we removed a costly processing step that directly translated into a 29% reduction in the minimum selling price of PDC. This work combines experimentation with process modeling of an integrated biorefinery design to show how utilizing tandem process steps can significantly reduce operating expenses and environmental impact of upgrading lignocellulosic biomass to a portfolio of high value products.

Sener, Canan [Great Lakes Bioenergy Research Cente↗

DOE OSTI2021

In Situ Wood Delignification toward Sustainable Applications

As one of the most abundant and versatile natural materials on Earth, recently wood has attracted tremendous attention from scientists and engineers due to its outstanding advantages, including hierarchically porous microstructure, high mechanical strength, environmental friendliness, renewability, and biodegradability. Wood’s hierarchically porous structure and chemical components (e.g., cellulose, hemicelluloses, and lignin) enable its mechanical, ionic, optical, and thermal properties to be tuned via physical, chemical, and/or thermal modifications. Among these various approaches, the chemical delignification of bulk wood is the most fascinating, in which the majority of lignin and hemicelluloses is removed while leaving the cellulose intact, maintaining wood’s physical integrity and hierarchical structure. This delignified structure is unique, composed of hollow, aligned channels made up of cellulose microfibrils, and particularly attractive given its origin from a sustainable and renewable resource. As a result, delignified wood has attracted increasing attention for applications that go far beyond traditional wood utilization, such as lightweight yet strong structural materials, energy storage and conversion, environmental remediation, flexible electronics, and bioengineering. Here, we review recent developments in bulk wood delignification strategies toward the achievement of such advanced wood technologies for sustainable applications, with a focus on the research in our group. Similar to chemical pulping and bleaching, wood delignification involves a series of nucleophilic reactions based on alkaline Na 2 SO 3 or Na 2 S systems (i.e., chemical pulping) or electrophilic, radical, and oxidation reactions based on H 2 O 2 , ClO 2 , or NaClO systems (i.e., chemical bleaching) to deconstruct, fragment, and promote the hydrophilicity of lignin macromolecules, which finally make lignin easier to be removed. We discuss the structure and properties of partially and near-completely delignified wood, with a focus on process-structure–property relationships. The resulting delignified wood materials, with tunable structure and properties, demonstrate various advanced functions, in a wide range of advanced applications, such as building and construction, green energy, and electronics. Finally, the potential challenges and appealing perspectives of in situ wood delignification are discussed. In situ wood delignification, as a powerful modification strategy, has speeded up the development of advanced wood technologies and wood-based functional materials and products.

36 MATERIALS SCIENCE↗