SEARCH · Search NASA

Results for “Model reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Structural dynamics system model reduction

Loads analysis for structural dynamic systems is usually performed by finite element models. Because of the complexity of the structural system, the model contains large number of degree-of-freedom. The large model is necessary since details of the stress, loads and responses due to mission environments are computed. However, a simplified model is needed for other tasks such as pre-test analysis for modal testing, and control-structural interaction studies. A systematic method of model reduction for modal test analysis is presented. Perhaps it will be of some help in developing a simplified model for the control studies.

Chen, J. C.↗

NASA NTRS1982

The residue-measure criterion for model reduction in the analysis of the NASA Space Shuttle's digital flight control system

A residue-measure criterion model reduction technique is applied to the vehicle dynamics model used in the design and analysis of the NASA Space Shuttle's digital flight control system. As implemented in this study the residue-measure technique involved an a priori residue calculation with control system biasing. The predictions of the reduced model are compared to vehicle level dynamic stability test data. These comparisons show an excellent correlation of the dominant spectral and response features between the model and test data. In addition, the application of the reduction technique to various Shuttle mission flight phases is demonstrated.

Gluch, D. P.↗

NASA NTRS1987

Flexible system model reduction and control system design based upon actuator and sensor influence functions

A model reduction technique based on aggregation with respect to sensor and actuator influence functions rather than modes is presented for large systems of coupled second-order differential equations. Perturbation expressions which can predict the effects of spillover on both the reduced-order plant model and the neglected plant model are derived. For the special case of collocated actuators and sensors, these expressions lead to the derivation of constraints on the controller gains that are, given the validity of the perturbation technique, sufficient to guarantee the stability of the closed-loop system. A case study demonstrates the derivation of stabilizing controllers based on the present technique. The use of control and observation synthesis in modifying the dimension of the reduced-order plant model is also discussed. A numerical example is provided for illustration.

Yam, Yeung↗

NASA NTRS1983

Large space structure model reduction and control system design based upon actuator and sensor influence functions

A model reduction procedure based on aggregation with respect to sensor and actuator influences rather than modes is presented for large systems of coupled second-order differential equations. Perturbation expressions which can predict the effects of spillover on both the aggregated and residual states are derived. These expressions lead to the development of control system design constraints which are sufficient to guarantee, to within the validity of the perturbations, that the residual states are not destabilized by control systems designed from the reduced model. A numerical example is provided to illustrate the application of the aggregation and control system design method.

Yam, Y.↗

NASA NTRS1985

Model Reduction for Control System Design

An approach and a technique for effectively obtaining reduced order mathematical models of a given large order model for the purposes of synthesis, analysis and implementation of control systems is developed. This approach involves the use of an error criterion which is the H-infinity norm of a frequency weighted error between the full and reduced order models. The weightings are chosen to take into account the purpose for which the reduced order model is intended. A previously unknown error bound in the H-infinity norm for reduced order models obtained from internally balanced realizations was obtained. This motivated further development of the balancing technique to include the frequency dependent weightings. This resulted in the frequency weighted balanced realization and a new model reduction technique. Two approaches to designing reduced order controllers were developed. The first involves reducing the order of a high order controller with an appropriate weighting. The second involves linear quadratic Gaussian synthesis based on a reduced order model obtained with an appropriate weighting.

Enns, D. F.↗

NASA NTRS1985

An eigensystem realization algorithm for modal parameter identification and model reduction

A method called the eigensystem realization algorithm is developed for modal parameter identification and model reduction of dynamic systems from test data. A new approach is introduced in conjunction with the singular-value decomposition technique to derive the basic formulation of minimum order realization which is an extended version of the Ho-Kalman algorithm. The basic formulation is then transformed into modal space for modal parameter identification. Two accuracy indicators are developed to quantitatively identify the system and noise modes. For illustration of the algorithm, an example is shown using experimental data from the Galileo spacecraft.

Juang, J.-N.↗

NASA NTRS1985

An Eigensystem Realization Algorithm (ERA) for modal parameter identification and model reduction

A method, called the Eigensystem Realization Algorithm (ERA), is developed for modal parameter identification and model reduction of dynamic systems from test data. A new approach is introduced in conjunction with the singular value decomposition technique to derive the basic formulation of minimum order realization which is an extended version of the Ho-Kalman algorithm. The basic formulation is then transformed into modal space for modal parameter identification. Two accuracy indicators are developed to quantitatively identify the system modes and noise modes. For illustration of the algorithm, examples are shown using simulation data and experimental data for a rectangular grid structure.

Juang, J. N.↗

NASA NTRS1989

Model reduction and control of flexible structures using Krylov subspaces

Krylov vectors and the concept of parameter-matching are combined to develop a model reduction algorithm for a damped structural dynamics system. The reduced-order model obtained matches a certain number of low-frequency moments of the full-order system. The major application of the present method is to the control of flexible structures. It is shown that, in the control of flexible structures, there generally exist three types of control energy spillover, namely, the control spillover, the observation spillover, and dynamic spillover. The formulation based on Krylov subspaces can eliminate the control and the observation spillover, while leaving only the dynamic spillover to be considered. Two examples are used to illustrate the efficacy of the Krylov method.

Craig, Roy R., Jr.↗

NASA NTRS1993

A consistent model reduction of measured modal parameters for reduced-order active control

The problem of synthesizing reduced-order linear models of vibrating structures for the design of fixed-order dynamic feedback control is investigated. The present technique builds on a recently developed procedure for constructing an objective set of mass and stiffness matrices from measured modal parameters that are akin to the Craig-Bampton synthesized ones obtained from finite element models. The constructed mass and stiffness matrices are determined directly from the identification of experimental data, however, rather than through correlation or reconciliation of a finite element model. A model truncation criterion is then applied to the identified minimum-order mass and stiffness model to satisfy certain observability/controllability requirements for the reduced model. Numerical examples illustrate the effectiveness of the proposed technique for synthesizing reduced-order controllers from system realizations of experimental data. The dynamic performance of the resulting closed-loop models is assessed using the known full-order structural dynamics and compared with existing model reduction techniques.

Alvin, K. F.↗

NASA NTRS1993

A COMPACT model reduction methodology for articulated, multi-flexible bodies structures

To simulate the dynamical motion of articulated, multiflexible body structures, one can use multibody simulation packages such as DISCOS. To this end, one need appropriate reduced-order models for all the flexible components involved. The component modes projection and assembly model reduction methodology is one way to construct these reduced-order component models. However, the generated reduced-order system models typically contain high frequency extraneous modes. The presence of high frequency extraneous modes in a reduced-order system model forces us to use a small stepsize in the numerical integration of that model, resulting in an increase in the elapsed time of the integration process. To eliminate these high-frequency modes, we first identify and discard the component modes that 'contributed' to the generations of these modes. A sensitivity analysis is then used to determine how the remaining component modes should be perturbed in order to still closely capture the selected system modes. The effectiveness of the proposed methodology has been successfully verified using a finite-element model of the Galileo spacecraft.

Lee, Allan Y.↗

NASA NTRS1983

Robot arm dynamic model reduction for control

General methods are described by which the mathematical complexities of explicit and exact state equations of robot arms can be reduced to a simplified and compact state equation representation without introducing significant errors into the robot arm dynamic model. The model reduction methods are based on homogeneous coordinates and on the Langrangian algorithm for robot arm dynamics, and utilize matrix, vector and numeric analysis techniques. The derivation of differential vector representation of centripetal and Coriolis forces which has not yet been established in the literature is presented.

Bejczy, A. K.↗

NASA NTRS1989

Model reduction in the physical coordinate system

In the dynamics modeling of a flexible structure, finite element analysis employs reduction techniques, such as Guyan's reduction, to remove some of the insignificant physical coordinates, thus producing a dynamics model that has smaller mass and stiffness matrices. But this reduction is limited in the sense that it removes certain degrees of freedom at a node points themselves in the model. From the standpoint of linear control design, the resultant model is still too large despite the reduction. Thus, some form of the model reduction is frequently used in control design by approximating a large dynamical system with a fewer number of state variables. However, a problem arises from the placement of sensors and actuators in the reduced model, because a model usually undergoes, before being reduced, some form of coordinate transformations that do not preserve the physical meanings of the states. To correct such a problem, a method is developed that expresses a reduced model in terms of a subset of the original states. The proposed method starts with a dynamic model that is originated and reduced in finite element analysis. Then the model is converted to the state space form, and reduced again by the internal balancing method. At this point, being in the balanced coordinate system, the states in the reduced model have no apparent resemblance to those of the original model. Through another coordinate transformation that is developed, however, this reduced model is expressed by a subset of the original states.

Yae, K. Harold↗

NASA NTRS1991

Unsymmetric Lanczos model reduction and linear state function observer for flexible structures

This report summarizes part of the research work accomplished during the second year of a two-year grant. The research, entitled 'Application of Lanczos Vectors to Control Design of Flexible Structures' concerns various ways to use Lanczos vectors and Krylov vectors to obtain reduced-order mathematical models for use in the dynamic response analyses and in control design studies. This report presents a one-sided, unsymmetric block Lanczos algorithm for model reduction of structural dynamics systems with unsymmetric damping matrix, and a control design procedure based on the theory of linear state function observers to design low-order controllers for flexible structures.

Su, Tzu-Jeng↗

NASA NTRS1991

Hybrid CMS methods with model reduction for assembly of structures

Future on-orbit structures will be designed and built in several stages, each with specific control requirements. Therefore there must be a methodology which can predict the dynamic characteristics of the assembled structure, based on the dynamic characteristics of the subassemblies and their interfaces. The methodology developed by CSC to address this issue is Hybrid Component Mode Synthesis (HCMS). HCMS distinguishes itself from standard component mode synthesis algorithms in the following features: (1) it does not require the subcomponents to have displacement compatible models, which makes it ideal for analyzing the deployment of heterogeneous flexible multibody systems, (2) it incorporates a second-level model reduction scheme at the interface, which makes it much faster than other algorithms and therefore suitable for control purposes, and (3) it does answer specific questions such as 'how does the global fundamental frequency vary if I change the physical parameters of substructure k by a specified amount?'. Because it is based on an energy principle rather than displacement compatibility, this methodology can also help the designer to define an assembly process. Current and future efforts are devoted to applying the HCMS method to design and analyze docking and berthing procedures in orbital construction.

Farhat, Charbel↗

NASA NTRS1993

Model reduction of mechanical systems

A reduced model of a stable mechanical system with proportional damping represented in modal coordinates is developed, based on a procedure reported by Commault and Guerin (1978). In this model, model error is calculated a priori and is used to determine the dominant modes. Two examples are presented showing that reduced models generated as described will be better or at least as good as those produced by the popular modal cost analysis scheme of Skelton and Hughes (1980).

Yousuff, Ajmal↗

NASA NTRS1992

Simulation and model reduction for the AFW program

The simulation methodology used in the Active Flexible Wing wind-tunnel test program is described. An overview of the aeroservoelastic modeling used in building the required batch and hot-bench simulations is presented. Successful hot-bench implementation required that the full mathematical model be significantly reduced while assuring that accuracy be maintained for all combinations of 10 inputs and 56 outputs. The reduction was accomplished by using a method based on internally balanced realizations and focussing on the linear, aeroelastic portion of the full mathematical model. The error-bound properties of the internally balanced realization significantly contribute to its utility in the model reduction process. The reduction method and the results achieved are described.

Buttrill, Carey↗

NASA NTRS1985

Residue-Measure Model-Reduction Technique

New residue-measure criterion simplifies mathematical models of feedback-control systems. Although originally developed for flight control, approach applied to any flexible structural system involving dominantly linear dynamics.

Gluch, D. P.↗

NASA NTRS1989

Model reduction for flexible structures - Test data approach

A reduced model of a system is obtained by truncating part of its state variables. Hankel singular values and component costs determine which component is deleted or retained in the reduced model. In this paper Hankel singular values and component costs of a flexible structure are obtained from the resonance test data, rather than from the system matrices. Test data, besides system dynamics, include also actuators and sensors dynamics. For this reason, the reduced model obtained from test data can be far from the optimal one. In this paper the reconstruction of the flexible structure indices from the joint actuator-sensor-flexible structure indices is discussed.

Gawronski, Wodek↗