Search NASA⌕ Search

SEARCH · Search NASA

Results for “Quantum structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A New Route to Quantum-Scale Structures through a Novel Enhanced Germanium Diffusion Mechanism

This project sought to develop a fundamental understanding of the mechanisms underlying a newly observed enhanced germanium (Ge) diffusion process in silicon germanium (SiGe) semiconductor nanostructures during thermal oxidation. Using a combination of oxidationdiffusion experiments, high resolution imaging, and theoretical modeling, a model for the enhanced Ge diffusion mechanism was proposed. Additionally, a nanofabrication approach utilizing this enhanced Ge diffusion mechanism was shown to be applicable to arbitrary 3D shapes, leading to the fabrication of stacked silicon quantum dots embedded in SiGe nanopillars. A new wet etch-based method for preparing 3D nanostructures for highresolution imaging free of obscuring material or damage was also developed. These results enable a new method for the controlled and scalable fabrication of on-chip silicon nanostructures with sub-10 nm dimensions needed for next generation microelectronics, including low energy electronics, quantum computing, sensors, and integrated photonics.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Liquid phase epitaxy growth of GaAs/GaAlAs multi-quantum well structures

Experiments in liquid phase epitaxial fabrication of thin GaAs/GaAlAs layers over a planar substrates have been carried out. Layer thicknesses smaller than 300 A were routinely obtained, with the best result being 120 A. Interface sharpness between the layers is approximately 10 A, which is comparable to OMCVD results, but the layers' thicknesses are usually not uniform. Of the experimental parameters, the growth time and the cooling rate seem to have the largest effect on the obtained layer thickness, while the growth temperature and the substrate crystallographic orientation produce less noticeable effects. Quantum effects in the grown layers were observed by photoluminescence measurements.

Cser, J.↗
DOE OSTI2022

Defect Structure in Quantum-Cutting Yb3+-Doped CsPbCl3 Perovskites Probed by X-Ray Absorption and Atomic Pair Distribution Function Analysis

Ytterbium-doping in all-inorganic lead-halide perovskites (CsPb(Cl1-xBrx)3) generates novel properties including quantum cutting and narrow line emission, making these materials attractive spectral down-converters for solar photovoltaics. The relationship between this optical efficiency and the defect structure(s) associated with Yb3+ dopants within perovskites is not well understood. Various charge-neutral doping motifs have previously been proposed and studied computationally, including clusters involving two substitutional Yb3+ ions charge-compensated by a single local Pb2+ vacancy. Near-band-edge defect states associated with such motifs are believed to play an important mechanistic role in quantum cutting itself. Here, we report the results of X-ray absorption and X-ray total-scattering measurements on ytterbium-doped CsPbCl3. XANES shows that the dopant oxidation state is exclusively Yb3+, and a combination of Yb L3 and Pb L3 EXAFS shows that this Yb3+ substitutes exclusively at Pb2+ sites, where it adopts a pseudo-octahedral [YbCl6]3- coordination environment. Shell-by-shell fits to the data show a short Yb-Cl bond distance of 2.58 Å compared to the Pb-Cl bond distance of 2.83 Å. We confirm this finding by X-ray pair distribution function analysis, which also shows evidence of additional Pb2+ vacancy formation induced by Yb3+ doping. We evaluate whether this is the primary mechanism of charge compensation using simulated EXAFS and pair distribution function data for several computed defect structures. Together, these results resolve the local dopant structures and charge-compensation mechanisms in lanthanide-doped all-inorganic lead-halide perovskites, and, as such, significantly advance the understanding of structure-function relationships in this important class of materials.

Kluherz, Kyle (ORCID:0000000279865167)↗
DOE OSTI2025

The structure of quantum singularities on a Cauchy horizon

Spacetime singularities pose a long-standing puzzle in quantum gravity. Unlike Schwarzschild, a generic family of black holes gives rise to a Cauchy horizon on which, even in the Hartle-Hawking state, quantum observables such as ⟨T μν ⟩ — the expectation value of the stress-energy tensor — can diverge, causing a breakdown of semiclassical gravity. Because they are diagnosed within quantum field theory (QFT) on a smooth background, these singularities may provide a better-controlled version of the spacetime singularity problem, and merit further study. Here, I highlight a mildness puzzle of Cauchy horizon singularities: the ⟨T μν ⟩ singularity is significantly milder than expected from symmetry and dimensional analysis. I address the puzzle in a simple spacetime ${\mathcal{W}}_P$, which arises universally near all black hole Cauchy horizons: the past of a codimension-two spacelike plane in flat spacetime. Specifically, I propose an extremely broad QFT construction in which, roughly speaking, Cauchy horizon singularities originate from operator insertions in the causal complement of the spacetime. The construction reproduces well-known outer horizon singularities (e.g., in the Boulware state), and remarkably, when applied to ${\mathcal{W}}_P$, gives rise to a universal mild singularity structure for robust singularities, ones whose leading singular behavior is state-independent. I make non-trivial predictions for all black hole Cauchy horizon singularities using this, and discuss extending the results beyond robust singularities and the strict near Cauchy horizon limit.

black holes↗
DOE OSTI2023

Entanglement structures in quantum field theories. II. Distortions of vacuum correlations through the lens of local observers

When observing a quantum field via detectors with access to only the mixed states of spatially separated, local regions—a ubiquitous experimental design—the capacity to access the full extent of distributed entanglement can be limited, shrouded by classical correlations. By performing projective measurements of the field external to two detection patches and classically communicating the results, underlying pure states may be identified for which entanglement quantification is clear. In the Gaussian continuous-variable states of the free scalar field vacuum, this protocol uncovers a disparity between the spacelike entanglement established within the field and that which is locally detectable. Further, this discrepancy is found to grow exponentially with the separation between observation regions. The protocol developed herein offers insight and practical guidance for clarifying the unavoidable distortion of quantum field correlations when viewed from the vantage of a pair of local observers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Effects of nuclear structure and quantum interference on diffractive vector meson production in ultra-peripheral nuclear collisions

Here we study diffractive vector meson production in ultra-peripheral collisions (UPCs) of heavy nuclei, utilizing a theoretical framework based on the Color Glass Condensate (CGC) formalism. We focus on Au + Au, U + U, Ru + Ru, Zr + Zr, and Pb + Pb collisions, examining the transverse momentum dependence of vector meson production cross-sections and co s(2ΔΦ)asymmetries in the decay product distributions to explore the role of nuclear geometry. The angular modulation is due to the linear polarization of the incoming photons and quantum interference effects. We extract nuclear radii and find them to be consistent with experimental data from the STAR collaboration. The amplitudes of the cos(2ΔΦ)modulation in the cross-section and the extracted radii depend on the nuclear geometry. This dependence is dominated by the geometry-dependent variation of the minimum impact parameter required for ultra-peripheral collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Automated Detection of Qubit Structures on Quantum Chips

In this study, YOLO (You Only Look Once), a well-known object detection and image segmentation model, is used to detect qubits on a quantum chip. The model is trained by exposing it to various images of objects of interest and by setting various training parameters to allow the model to learn in unconventional conditions. We were able to provide the model with numerous images of qubits and various prominent features of note located on a qubit. We then created a simple GUI to display the model's live detections that would be integrated with the SEMs. This allowed us to create various functions such as auto-imagery of the qubits across a chip, auto-focusing, auto-contrasting, automatic staging, and directional corrections, enabling users to scan and analyze qubit surfaces in a fast and effective manner.

Perjuste, Ruth [Wellesley Coll.]↗
NASA NTRS1985

Molecular beam epitaxial growth and transmission electron microscopy studies of thin GaAs/InAs(100) multiple quantum well structures

GaAs/InAs(100) multiple interface structures involving 7.4 percent lattice mismatch have been fabricated via molecular beam epitaxy and examined via transmission electron microscopy. It is found that high-quality, dislocation-free interfaces involving such high lattice mismatch can indeed be experimentally realized for very thin layers provided proper care is given to achieve a balance between the growth kinetics and the thermodynamics leading to the equilibrium ground state of the strained layer. The compressive strain is homogeneously accommodated and a tetragonal distortion is induced in the InAs layer with a perpendicular lattice constant in close agreement with that expected on the basis of the continuum theory and elastic constants of bulk InAs.

Grunthaner, F. J.↗
NASA NTRS1989

Characterization of quantum well structures using a photocathode electron microscope

Present day integrated circuits pose a challenge to conventional electronic and mechanical test methods. Feature sizes in the submicron and nanometric regime require radical approaches in order to facilitate electrical contact to circuits and devices being tested. In addition, microwave operating frequencies require careful attention to distributed effects when considering the electrical signal paths within and external to the device under test. An alternative testing approach which combines the best of electrical and optical time domain testing is presented, namely photocathode electron microscope quantitative voltage contrast (PEMQVC).

Spencer, Michael G.↗
DOE OSTI2025

Automated Detection of Qubit Structures on Quantum Chips

In this study, YOLO (You Only Look Once), a well-known object detection and image segmentation model, is used to detect qubits on a quantum chip. The model is trained by exposing it to various images of objects of interest and by tweaking various training parameters to allow the model to learn from a limited and highly specialized dataset of SEM imagery. The model was provided with numerous images of qubits and various prominent features of note located on a qubit. These detections were then integrated into a simple GUI, allowing for real-time feedback alongside SEM usage. This will allow us to create various functions enabling automated functions like chip-wide scanning, auto-focusing, and image correction.

Perjuste, Ruth [Wellesley Coll.]↗
DOE OSTI2025

Pressure-induced tuning of the triangular-honeycomb structure of ferroelectric quantum spin liquid candidate, TbInO 3

The pressure response of the triangular-honeycomb-structured quantum spin liquid candidate, TbInO 3 , has been determined via neutron powder diffraction up to 5.75(5) GPa. The system retains hexagonal symmetry up to the maximum pressure considered. The structure was found to compress less anisotropically than related compounds, though it is more compressible within the 2D plane than between subsequent layers. Through extracting the O-atom coordinates we find experimental evidence that may suggest the enhancement of ferroelectricity at pressures as low as 3 GPa.

Ridley, Christopher J. [Oak Ridge National Laborat↗
NASA NTRS1972

Weakly superconducting, thin-film structures as radiation detectors.

Measurements were taken with weakly superconducting quantum structures of the Notarys-Mercereau type, representing a thin superconductor film with a short region that is weakened in the sense that its transition temperature is lower than in the remaining portion of the film. The structure acts as a superconducting relaxation oscillator in which the supercurrent increases with time until the critical current of the weakened section is attained, at which moment the supercurrent decays and the cycle repeats. Under applied radiation, a series of constant-voltage steps appears in the current-voltage curve, and the size of the steps varies periodically with the amplitude of applied radiation. Measurements of the response characteristics were made in the frequency range of 10 to 450 MHz.

Kirschman, R. K.↗
DOE OSTI2021

Modeling electron transfer from the barrier in InAs/GaAs quantum dot-well structure

We study single electron tunnelling from the barrier in the binary InAs/GaAs quantum structure including quantum well (QW) and quantum dot (QD). The tunneling is described in the terms of localized/delocalized states and their spectral distribution. The modeling is performed by using the phenomenological effective potential approach for InAs/GaAs heterostructures. The results for the two and three-dimensional models are presented. We focus on the effect of QD-QW geometry variations. The relation to the PL experiments is shown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

ComDMFT v.2.0: Fully self-consistent ab initio GW+EDMFT for the electronic structure of correlated quantum materials

ComDMFT is a parallel computational package designed to study the electronic structure of correlated quantum materials from first principles. Our approach is based on the combination of first-principles methods and dynamical mean field theories. In version 2.0, we implemented fully-diagrammatic GW+EDMFT from first-principles self-consistently. In this approach, correlated electrons are treated within full GW+EDMFT and the rest are treated within full-GW, seamlessly. Further, this implementation enables the electronic structure calculation of quantum materials with weak, intermediate, and strong electron correlation without prior knowledge of the degree of electron correlation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Qubit coupled cluster singles and doubles variational quantum eigensolver ansatz for electronic structure calculations

Variational quantum eigensolver (VQE) for electronic structure calculations is believed to be one major potential application of near term quantum computing. Among all proposed VQE algorithms, the unitary coupled cluster singles and doubles excitations (UCCSD) VQE ansatz has achieved high accuracy and received a lot of research interest. However, the UCCSD VQE based on fermionic excitations needs extra terms for the parity when using Jordan–Wigner transformation. Here we introduce a new VQE ansatz based on the particle preserving exchange gate to achieve qubit excitations. The proposed VQE ansatz has gate complexity up-bounded to O ( n 4 ) for all-to-all connectivity where n is the number of qubits of the Hamiltonian. Numerical results of simple molecular systems such as BeH 2 , H 2 O, N 2 , H 4 and H 6 using the proposed VQE ansatz gives very accurate results within errors about 10 -3 Hartree.

Physics↗
DOE OSTI2020

Quantum computation of silicon electronic band structure

Development of quantum architectures during the last decade has inspired hybrid classical–quantum algorithms in physics and quantum chemistry that promise simulations of fermionic systems beyond the capability of modern classical computers, even before the era of quantum computing fully arrives. Strong research efforts have been recently made to obtain minimal depth quantum circuits which could accurately represent chemical systems. Here, we show that unprecedented methods used in quantum chemistry, designed to simulate molecules on quantum processors, can be extended to calculate properties of periodic solids. In particular, we present minimal depth circuits implementing the variational quantum eigensolver algorithm and successfully use it to compute the band structure of silicon on a quantum machine for the first time. We are convinced that the presented quantum experiments performed on cloud-based platforms will stimulate more intense studies towards scalable electronic structure computation of advanced quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantum physics of stars

Stars are slowly developing objects; the lifetimes of the different burning phases are determined by the strength of nuclear reactions, which in turn are defined by the quantum structure of the associated nuclei at the threshold and the respective reaction mechanisms. Stars, from the nuclear physics perspective, are cold environments where only a few of the key nuclear reactions have been measured at the actual stellar plasma temperatures. This is also the case for more dynamic astrophysical phenomena from the big bang to stellar explosions. Most of the nuclear reaction rates are therefore based on theoretical extrapolations. A number of discrepancies between these predictions and the associated stellar signatures have been observed, and many may be due to low-energy or near-threshold quantum effects. These effects need to be understood in order to reliably model nuclear reaction processes, not only for stars but also for low-temperature plasma environments such as controlled magnetic or inertial confinement fusion systems, which operate in similar temperature regimes. This review summarizes the various theoretical techniques presently used for deriving reaction rates and discusses possible quantum effects that may impact the reaction cross section near the reaction threshold. These resemble enhanced single-particle and cluster structures near threshold and associated interference effects. New experimental techniques such as deep-underground accelerators or the study of transfer reactions to mimic the quantum-mechanical transition strength, the so-called Trojan horse method, provide ways to directly or indirectly probe the reaction features that determine the reaction rates at stellar energies. Furthermore, this is demonstrated on a number of key nuclear reactions for different nucleosynthesis environments. Finally, current inconsistencies between experimental predictions and observations are discussed.

Models & methods for nuclear reactions↗