Search NASA⌕ Search

SEARCH · Search NASA

Results for “SCALE MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Single-Stream Empirical Jet-Noise Models Based on Scale-Model Data

Accurate single-stream jet-noise models for hot jets in flight are necessary for predicting noise of future commercial supersonic aircraft at takeoff. Previous comparisons between flight data and existing models have shown unacceptably large errors in the predictive tools. In the current effort, acoustic data were acquired in the Aero-Acoustic Propulsion Laboratory at the NASA Glenn Research Center for a single-stream hot jet with a range of operating conditions and simulated flight speeds that include those expected at takeoff of commercial supersonic aircraft. Models are presented for the resulting shape functions used to estimate the average spectra derived from the appropriate scaling of the jet-noise data.

Acoustics↗
NASA NTRS1975

Thermal scale modeling of a manned spacecraft

A manned spacecraft thermal scale modeling program is described. The program consisted of the design, construction, instrumentation, testing, data correlation, and associated analysis of a transient thermal scale model (TSM) of the Subsystem Test Bed (STB). The STB was chosen as a representative manned spacecraft for which detailed thermal vacuum test data were available. The STB is a cylindrical vehicle (15 ft diameter by 8.3 ft high) with four docking hatches and six windows. The pressure shell is insulated with multilayer insulation and protected by meteoroid shields. Four truss assemblies were used to support the STB during testing. It was concluded that thermal scale modeling can be used as an effective thermal design/verification tool for manned spacecraft. Thermal analysis can be used in conjunction with scale model testing to provide a verified math model that can be applied to the prototype manned spacecraft.

Shannon, R. L.↗
NASA NTRS1981

State of the art in subgrid scale modeling

The present state of the art in subgrid scale modeling for large eddy simulation is reviewed. It is found that the eddy viscosity models are sufficient for simulating homogeneous flows but are probably insufficient for inhomogeneous shear flows. One- and two-equation subgrid scale models probably will not be of great value in subgrid scale modeling, and full Reynolds stress models may be required. In the latter, the convection and diffusion terms are expected to be of greater importance than they are in time-average modeling, but the pressure redistribution terms may be of less importance. A scale similarity model may provide an alternative.

Ferziger, J. H.↗
NASA NTRS2019

Jet Noise Prediction Comparisons with Scale Model Tests and Learjet Flyover Data

Recent interest in commercial supersonic flight has highlighted the need to accurately predict Effective Perceived Noise Levels (EPNL) for aircraft and, since the dominant noise source at takeoff will likely be jet noise, specifically jet noise contributions. The current study compares predictions from historical jet-noise models within NASA’s Aircraft Noise Prediction Program and scale-model data to measurements made in a Learjet 25 flight test. The noise levels from the predictions and scale-model data were below those for the flight data by 2.5 – 3.5, 1 – 2, and 3 – 5 EPNdB for the SAE model, the Stone Jet model, and the scale-model data, respectively. Tones and broadband haystacks were identified in the flight spectra that are not associated with jet noise which increased the flight EPNL by at least 0.5 EPNdB over that computed from spectra with the tones and haystacks removed. The study highlights the need for accurate exhaust temperature measurements, aircraft flight position information, and averaging data across a line of microphones in flight tests. For example, a 100° F to 200° F difference in jet exhaust temperature is enough to explain the differences between flight, model scale, and prediction comparisons.

Henderson, Brenda↗
NASA NTRS2020

Jet Noise Prediction Comparisons with Scale Model Tests and Learjet Flyover Data

Recent interest in commercial supersonic flight has highlighted the need to accurately predict Effective Perceived Noise Levels (EPNL) for aircraft and, since the dominant noise source at takeoff will likely be jet noise, specifically jet noise contributions. The current study compares predictions from historical jet-noise models within NASA’s Aircraft Noise Prediction Program and scale-model data to measurements made in a Learjet 25 flight test. The noise levels from the predictions and scale-model data were below those for the flight data by 2.5 – 3.5, 1 – 2, and 3 – 5 EPNdB for the SAE model, the Stone Jet model, and the scale-model data, respectively. Tones and broadband haystacks were identified in the flight spectra that are not associated with jet noise which increased the flight EPNL by at least 0.5 EPNdB over that computed from spectra with the tones and haystacks removed. The study highlights the need for accurate exhaust temperature measurements, aircraft flight position information, and averaging data across a line of microphones in flight tests. For example, a 100° F to 200° F difference in jet exhaust temperature is enough to explain the differences between flight, model scale, and prediction comparisons.

Henderson, Brenda↗
NASA NTRS1988

Space Station - A focus for the development of structural dynamics scale model technology for large flexible space structures

The paper discusses the scale model technology being developed at the NASA Langley Research Center in support of the development of structural dynamic prediction methods for large flexible space structures. Space Station is used as a focus. The Dynamic Scale Model Technology (DSMT) Program is described; results of the effect of scaling Space Station components are presented; and supporting scale model technology development activities are described and results presented. The conceptual design of a hybrid-scale Pathfinder model for developing test techniques and suspension methods is also discussed, and a summary of the broad application of the scale model technology being developed is presented.

Letchworth, Robert↗
NASA NTRS1973

S-2 stage 1/25 scale model base region thermal environment test. Volume 1: Test results, comparison with theory and flight data

A 1/25 scale model S-2 stage base region thermal environment test is presented. Analytical results are included which reflect the effect of engine operating conditions, model scale, turbo-pump exhaust gas injection on base region thermal environment. Comparisons are made between full scale flight data, model test data, and analytical results. The report is prepared in two volumes. The description of analytical predictions and comparisons with flight data are presented. Tabulation of the test data is provided.

Sadunas, J. A.↗
NASA NTRS2004

Full Scale Rotor Aeroacoustic Predictions and the Link to Model Scale Rotor Data

The NASA Aeroacoustic Prediction System (NAPS) is used to establish a link between model-scale and full-scale rotor predictions and is partially validated against measured wind tunnel and flight aeroacoustic data. The prediction approach of NAPS couples a comprehensive rotorcraft analysis with acoustic source noise and propagation codes. The comprehensive analysis selected for this study is CAMRAD-II, which provides the performance/trim/wake solution for a given rotor or flight condition. The post-trim capabilities of CAMRAD-II are used to compute high-resolution sectional airloads for the acoustic tone noise analysis, WOPMOD. The tone noise is propagated to observers on the ground with the propagation code, RNM (Rotor Noise Model). Aeroacoustic predictions are made with NAPS for an isolated rotor and compared to results of the second Harmonic Aeroacoustic Rotor Test (HART-II) program, which tested a 40% dynamically and Mach-scaled BO-105 main rotor at the DNW. The NAPS is validated with comparisons for three rotor conditions: a baseline condition and two Higher Harmonic Control (HHC) conditions. To establish a link between model and full-scale rotor predictions, a full-scale BO-105 main rotor input deck for NAPS is created from the 40% scale rotor input deck. The full-scale isolated rotor predictions are then compared to the model predictions. The comparisons include aerodynamic loading, acoustic levels, and acoustic pressure time histories for each of the three conditions. With this link established, full-scale predictions are made for a range of descent flight conditions and compared with measured trends from the recent Rotorcraft Operational Noise Abatement Procedures (RONAP) flight test conducted by DLR and ONERA. Additionally, the effectiveness of two HHC conditions from the HART-II program is demonstrated for the full-scale rotor in flight.

Boyd, D. Douglas, Jr.↗
NASA NTRS1987

Preliminary design, analysis, and costing of a dynamic scale model of the NASA space station

The difficulty of testing the next generation of large flexible space structures on the ground places an emphasis on other means for validating predicted on-orbit dynamic behavior. Scale model technology represents one way of verifying analytical predictions with ground test data. This study investigates the preliminary design, scaling and cost trades for a Space Station dynamic scale model. The scaling of nonlinear joint behavior is studied from theoretical and practical points of view. Suspension system interaction trades are conducted for the ISS Dual Keel Configuration and Build-Up Stages suspended in the proposed NASA/LaRC Large Spacecraft Laboratory. Key issues addressed are scaling laws, replication vs. simulation of components, manufacturing, suspension interactions, joint behavior, damping, articulation capability, and cost. These issues are the subject of parametric trades versus the scale model factor. The results of these detailed analyses are used to recommend scale factors for four different scale model options, each with varying degrees of replication. Potential problems in constructing and testing the scale model are identified, and recommendations for further study are outlined.

Gronet, M. J.↗
NASA NTRS2007

Using Multi-scale Modeling Systems to Study the Precipitation Processes

Numerical cloud models, which are based the non-hydrostatic equations of motion, have been extensively applied to cloud-scale and mesoscale processes during the past four decades. Because cloud-scale dynamics are treated explicitly, uncertainties stemming from convection that have to be parameterized in (hydrostatic) large-scale models are obviated, or at least mitigated, in cloud models. Global models will use the non-hydrostatic framework when their horizontal resolution becomes about 10 km, the theoretical limit for the hydrostatic approximation. This juncture will be reached one to two decades from now. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (1) a cloud-resolving model (CRM), (2) a regional scale model, (3) a coupled CRM and global model, and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer processes and the explicit cloud-radiation, and cloudland surface interactive processes are applied in this multi-scale modeling system. In this talk, a review of developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the interactions between clouds, precipitation, and aerosols will be presented.

Tao, Wei-Kuo↗
NASA NTRSDate not supplied

Learjet 25D Jet Noise Flyover Measurements: Comparisons with Scale-Model Data

Continued interest in commercial supersonic flight has highlighted the need for accurate jet-noise predictions as jet noise is expected to be a dominant noise source for aircraft takeoff conditions. The current study compares the acoustic spectra obtained from a scale-model investigation to that from a Learjet 25D flyover test. Reasonable agreement was achieved between the scale-model and flight data in both peak level and frequency when the physical scale factor for the scale-model was increased by roughly 6%. The peak perceived noise levels (PNL) for the flight data were between 1.29 dB and 1.65 dB higher than those for the scale model. The roll-off of PNL with time for large emission angles was greater for the flight data than for the scale-model data. Using a distributed source model for shear-layer-refraction corrections to the scale-model data slightly improved comparisons to flight data at low frequencies for emission angles near 70° and between 110° and 130°. Distributed source models had no impact on the scale-model spectra near the peak jet-noise angle. Applying a stretching factor to the distributed source models to capture the effects of a flight stream had a very limited impact on the computed spectra.

Acoustics↗
NASA NTRS1972

Evaluation of a 40 to 1 scale model of a low pressure engine

An evaluation of a scale model of a low pressure rocket engine which is used for secondary injection studies was conducted. Specific objectives of the evaluation were to: (1) assess the test conditions required for full scale simulations; (2) recommend fluids to be used for both primary and secondary flows; and (3) recommend possible modifications to be made to the scale model and its test facility to achieve the highest possible degree of simulation. A discussion of the theoretical and empirical scaling laws which must be observed to apply scale model test data to full scale systems is included. A technique by which the side forces due to secondary injection can be analytically estimated is presented.

Cooper, C. E., Jr.↗
NASA NTRS1987

Cruise noise of the 2/9th scale model of the Large-scale Advanced Propfan (LAP) propeller, SR-7A

Noise data on the Large-scale Advanced Propfan (LAP) propeller model SR-7A were taken in the NASA Lewis Research Center 8 x 6 foot Wind Tunnel. The maximum blade passing tone noise first rises with increasing helical tip Mach number to a peak level, then remains the same or decreases from its peak level when going to higher helical tip Mach numbers. This trend was observed for operation at both constant advance ratio and approximately equal thrust. This noise reduction or, leveling out at high helical tip Mach numbers, points to the use of higher propeller tip speeds as a possible method to limit airplane cabin noise while maintaining high flight speed and efficiency. Projections of the tunnel model data are made to the full scale LAP propeller mounted on the test bed aircraft and compared with predictions. The prediction method is found to be somewhat conservative in that it slightly overpredicts the projected model data at the peak.

Dittmar, James H.↗
NASA NTRS1987

Cruise noise of the 2/9 scale model of the Large-scale Advanced Propfan (LAP) propeller, SR-7A

Noise data on the Large-scale Advanced Propfan (LAP) propeller model SR-7A were taken in the NASA Lewis Research Center 8 x 6 foot Wind Tunnel. The maximum blade passing tone noise first rises with increasing helical tip Mach number to a peak level, then remains the same or decreases from its peak level when going to higher helical tip Mach numbers. This trend was observed for operation at both constant advance ratio and approximately equal thrust. This noise reduction or, leveling out at high helical tip Mach numbers, points to the use of higher propeller tip speeds as a possible method to limit airplane cabin noise while maintaining high flight speed and efficiency. Projections of the tunnel model data are made to the full scale LAP propeller mounted on the test bed aircraft and compared with predictions. The prediction method is found to be somewhat conservative in that it slightly overpredicts the projected model data at the peak.

Dittmar, James H.↗
NASA NTRS1985

Preliminary measurement of the noise from the 2/9 scale model of the Large-scale Advanced Propfan (LAP) propeller, SR-7A

Noise data on the Large-scale Advanced Propfan (LAP) propeller model SR-7A were taken into the NASA Lewis 8- by 6-Foot Wind Tunnel. The maximum blade passing tone decreases from the peak level when going to higher helical tip Mach numbers. This noise reduction points to the use of higher propeller speeds as a possible method to reduce airplane cabin noise while maintaining high flight speed and efficiency. Comparison of the SR-7A blade passing noise with the noise of the similarly designed SR-3 propeller shows good agreement as expected. The SR-7A propeller is slightly noisier than the SR-3 model in the plane of rotation at the cruise condition. Projections of the tunnel model data are made to the full-scale LAP propeller mounted on the test bed aircraft and compared with design predictions. The prediction method is conservative in the sense that it overpredicts the projected model data.

Dittmar, J. H.↗
NASA NTRS1997

Scale Model Icing Research Tunnel

NASA Lewis Research Center's Icing Research Tunnel (IRT) is the world's largest refrigerated wind tunnel and one of only three icing wind tunnel facilities in the United States. The IRT was constructed in the 1940's and has been operated continually since it was built. In this facility, natural icing conditions are duplicated to test the effects of inflight icing on actual aircraft components as well as on models of airplanes and helicopters. IRT tests have been used successfully to reduce flight test hours for the certification of ice-detection instrumentation and ice protection systems. To ensure that the IRT will remain the world's premier icing facility well into the next century, Lewis is making some renovations and is planning others. These improvements include modernizing the control room, replacing the fan blades with new ones to increase the test section maximum velocity to 430 mph, installing new spray bars to increase the size and uniformity of the artificial icing cloud, and replacing the facility heat exchanger. Most of the improvements will have a first-order effect on the IRT's airflow quality. To help us understand these effects and evaluate potential improvements to the flow characteristics of the IRT, we built a modular 1/10th-scale aerodynamic model of the facility. This closed-loop scale-model pilot tunnel was fabricated onsite in the various shops of Lewis' Fabrication Support Division. The tunnel's rectangular sections are composed of acrylic walls supported by an aluminum angle framework. Its turning vanes are made of tubing machined to the contour of the IRT turning vanes. The fan leg of the tunnel, which transitions from rectangular to circular and back to rectangular cross sections, is fabricated of fiberglass sections. The contraction section of the tunnel is constructed from sheet aluminum. A 12-bladed aluminum fan is coupled to a turbine powered by high-pressure air capable of driving the maximum test section velocity to 550 ft/sec (Mach 0.45). The air turbine and instrumentation are housed inside a fiberglass nacelle. Total and static pressure measurements can be taken around the loop, and velocity and flow angularity measurements can be taken with hot-wire and five-hole probes at specific locations. The Scale Model Icing Research Tunnel (SMIRT) is undergoing checkout tests to determine how its airflow characteristics compare with the IRT. Near-term uses for this scale-model tunnel include determining the aerodynamic effects of replacing the 52-yearold W-shaped heat exchanger with a flat-faced heat exchanger. SMIRT is an integral part of the improvements planned for the IRT because testing the proposed IRT improvements in a scale-model tunnel will lower costs and improve productivity.

Canacci, Victor A.↗