Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion barriers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Electrochemical Amyloid β Immunosensor Based on Ti 3 C 2 T x MXene Nanosheets

Alzheimer’s disease (AD) is the most common neurodegenerative disease and a major health-care problem. More than 55 million people in the world, including 6.7 million Americans, are living with AD. As AD is characterized by production and deposition of β-amyloid peptide (Aβ) in the brain, Aβ is considered as a potential biomarker for diagnosing and monitoring the progression of AD. Nanomaterials-based electrochemical immunosensor is one of the most promising methods for early diagnosis and therapeutic of AD, due to its highly selective, sensitive, and label-free advantages. The graphene-like two-dimensional (2D) MXene nanosheets have shown large surface area, good conductivity, biocompatibility, high ion transport, and low diffusion barrier, attracting attention in recent years to use it as the nanomaterial substrate for biosensor fabrication. In this paper, we presented a Ti 3 C 2 T x MXene nanosheets-based electrochemical immunosensor to detect trace Aβ for early diagnosis of AD.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Exploring the Performance and Reliability of Screen-Printable Fire-Through Copper Paste on PERC Solar Cells

In this work, we present the performance and reliability of a fire-through copper (Cu) paste which has been screen printed on c-Si solar cell with passivated emitter rear contact (PERC). The Cu paste is fired through silicon nitride (SiN) anti-reflection coating at a peak temperature of 630 degrees C . SEM images of the Cu paste show a Cu core with ~200 nm oxide shell around the particles. This conductive oxide layer acts as a diffusion barrier between Cu and Si and prevents the degradation of cell performance during accelerated aging conditions. An efficiency of 19.250% has been achieved with Voc=654mV,FF= 76.68%, Jsc=38.40 m.A/cm 2 for champion PERC cells. Accelerated testing of the PERC mini-modules in damp heat chamber with 85 degrees C and 85% humidity have demonstrated that the devices are operational even after 1,500 hours. Devices with screen printed Ag contacts on the front side have been studied in parallel to the Cu contacts for comparison.

copper↗
DOE OSTI2026

Comparative study on the formation of Cr and Ti ohmic contacts to (001) β -Ga 2 O 3

Here, a comparative study of Cr/Au and Ti/Au ohmic contacts on (001) β-Ga 2 O 3 was conducted. The electrical behavior from current-voltage measurements and the interfacial composition and microstructure as determined from high-resolution transmission electron microscopy (TEM) with energy dispersive x-ray analysis were compared for the different contacts at selected points in an annealing series (300–700 °C, 1 min. anneals in N 2 ). Cr/Au contacts became ohmic at temperatures (300–350 °C) approximately 50–100 °C lower than Ti/Au contacts (400–450 °C). Cr/Au and Ti/Au contacts demonstrated optimal ohmic behavior (lowest resistance) when annealed to 450–500 and 500–600 °C, respectively, with Ti/Au contacts yielding a lower total resistance than Cr/Au. Cross-sectional TEM images of Cr/Au contacts annealed at 450 °C revealed the presence of Au nanoclusters at the Ga 2 O 3 interface and CrO x layers at both the top of the contact and the Ga 2 O 3 interface. Whereas TiO x also formed at the top and bottom interfaces in 450 °C-annealed Ti/Au contacts, the TiO x surface layer appeared to be variable in thickness and/or discontinuous, unlike the CrO x surface layer. Au nanoclusters were not detected at the interface in the Ti/Au contacts. The interdiffusion and oxidation observed in both contact metallizations point to the need for diffusion barriers that may allow these contacts to be used in future Ga 2 O 3 -based devices that operate at elevated temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Arbitrary Low-Dimensional Film Transfer Enabled by GeO 2 Release Layer

Low-dimensional materials show great promise for enhanced computing and sensing performance in mission-relevant environments. However, integrating low-dimensional materials into conventional electronics remains a challenge. Here, we demonstrate a novel transfer method by which low-dimensional materials and their heterostructures can be transferred onto any arbitrary substrate. Our method relies on a water soluble GeO 2 substrate from which lowdimensional materials are transferred without significant perturbation. We apply the method to transfer a working electronic device based on a low-dimensional material. Process developments are achieved to enable the fabrication and transfer of a working electronic device, including the growth of high-k dielectric on GeO 2 by atomic layer deposition and inserting an indium diffusion barrier into the device gate stack. This work supports Sandia’s heterogeneous integration strategy to broaden the implementation of low-dimensional films and their devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evaluating the Performance and Reliability of Screen-Printable Fire-Through Copper Paste on PERC Solar Cells

A bifacial silicon heterojunction solar cell demands approximately 210 mg usage of silver paste (9 busbars, 24.5%, bifacial, M6 size wafer). Copper is an excellent alternative to silver: 100x cheaper, similar elecvtrical resistivities, and 1000x more abundant. Successful demonstration of large area selective emitter PERC solar cells using Cu fire-through paste with FF approximately 75% and approximately 19%. Paste chemistry results in oxide-based Cu diffusion barrier, leading to good reliability of the devices: 1000h DHT giving a 3.5% efficiency drop. The additional series resistance still needs to be lowered. Printed and fired cell performance is governed mostly by pFF, especially J02 ; same for DHT degradation. Further improvement in printing and firing optimization for lower series resistance and higher FF.

Ag↗
DOE OSTI2024

Interfacial Analysis of Blister Formation in U-10Mo Mini-Plates

A thorough investigation of potential failure mechanisms builds confidence in the performance of monolithic U-10wt%Mo (U-10Mo) fuel plates. The lowenriched uranium (LEU) fuel system is currently undergoing qualification as a high U-density fuel that can be used to convert United States high-performance research reactors from high-enriched uranium (HEU) operation. This will require establishing fuel operational limits such that fission products and a coolable geometry are retained, even during off-normal reactor operation conditions [1]. Such off-normal conditions can subject the fuel plates to temperatures where the internal pressure of precipitated fission gasses result in a permanent deformed, raised area of the cladding, referred to as a blister. These blisters can reduce the local coolability of a fuel plate and can even close coolant channels of a fuel assembly, so blistered plates are considered failed regardless of whether the fuel is truly breached. Historically, a marginto- failure is established through out-of-pile blister threshold testing of irradiated fuel plates. This is accomplished by incrementally heating irradiated fuel plates until blisters are observed. This reveals the temperature threshold that would have resulted in a blister if a plate experienced them at those irradiation conditions [2]. While the blister testing itself reveals the temperatures at which the cladding mechanical integrity was exceeded, a more thorough investigation of the interface evolution in proximity to formed blisters may reveal mechanisms as to the blister formation and retention of fission gases. Previous studies have explored potential underlying mechanisms in historical plates that may have been close to blistering [3]; however, this work is the first exploration of blister tested irradiated plates, fabricated by a commercial vendor—another requirement for qualification of the fuel system [1]. The Mini-plate 1 (MP-1) experiment was the first in a series of irradiation and post-irradiation examination (PIE) campaigns to qualify the U-10Mo monolithic fuel system. It consisted of commercially fabricated 25.4×101.5 mm Al-clad mini-plates with a monolithic U-10Mo foil coated in a Zr diffusion barrier. The primary MP-1 PIE campaign was previously completed. Among the suit of examinations was a blister testing campaign, where plates were incrementally annealed in 25°C increments until blisters were observed or a maximum temperature of 550°C was reached [4]. The previously blistered plates from this campaign were revisited in this work.

25228↗
DOE OSTI2024

First principles density functional theory study of tritium species adsorption on Ni(111) surface and diffusion in nickel-sublayer for tritium storage

The nickel-plated zircaloy-4 is used as a tritium ( 3 H) getter in the tritium-producing burnable absorber rods (TPBARs) to capture 3 H produced in the 6 Li-riched annular γ-LiAlO 2 pellet under neutron irradiation. The experimental data and our previous theoretical results showed that the 3 H species produced from the γ-LiAlO 2 pellet were mainly 3 H 2 and 3 H 2 O. These 3 H species diffuse from the surface of the LiAlO 2 pellet across vacuum to the nickel-plated zircaloy-4 getter and then further diffuse into the getter to chemically form metal hydrides. While a number of studies show that oxygen binds strongly as compared to 3 H on the nickel (Ni) layer, the detailed mechanism of 3 H species absorption and diffusion across the Ni plate and Ni/Zr interface are still unclear. By employing density functional theory calculations, here we explored the 3 H 2 and 3 H 2 O species adsorption and dissociation on the Ni(111) surface and diffusion into the Ni sublayer. Our results indicated that the 3 H 2 and 3 H 2 O dissociate on the Ni(111) surface. The NiO x and Ni(O 3 H) x could be formed in the Ni layer due to the higher oxygen (O) diffusion energy barrier and formation of Ni vacancy defects. The oxygen was found to be retained in the Ni layer from diffusing across the Ni–Zr interface. This was revealed by comparing the diffusion barriers for 3 H with O. 3 H was found to have nearly three times smaller diffusion barrier than for O, making 3 H comparatively easier to diffuse through the Ni layer. In conclusion, the obtained results provide guidelines for experimental measurements on 3 H retention behavior in TPBARs and may open further avenues to explore the impurity effects on 3 H diffusion and storage at the Ni/zircaloy interfaces.

Tafen, De Nyago [National Energy Technology Lab. (↗
DOE OSTI2026

Breaking the Energy Barrier of Heavy Metal Ion Diffusion in Micropores with Mesoporous 3D Graphene for Fast and Efficient Cu2+ Removal

Efficient removal of heavy metals from water critically depends not only on adsorption capacity but also on ion diffusion kinetics and the associated energy barriers. In conventional carbon adsorbents, severe diffusion confinement within micropores restricts ion transport, resulting in sluggish adsorption kinetics and large apparent activation energies despite high specific surface areas. Here, we demonstrate that this fundamental limitation is overcome by engineering meso/macroporous architectures in the 3D graphene materials synthesized via our discovered alkali-metal reactions with\\\\r\\\\n2\\\\r\\\\nCO. The unique 3D graphene materials possess defect-rich graphene frameworks with interconnected meso/macroporous networks, exhibiting simultaneously high surface area and greatly enhanced meso/macropore volume that enable efficient access to adsorption sites. As a result, the Cu2+ adsorption on 3D graphene proceeds with very low activation energies (4.98 kJ mol–1), which is almost 4 times smaller than on activated carbon (23.1 kJ mol–1). This finding offers a promising platform for efficient and sustainable water purification.

25 ENERGY STORAGE↗
DOE OSTI2025

Insights into oxygen diffusion in rare earth disilicate environmental barrier coatings

Environmental barrier coatings (EBC) are crucial for the use of SiC-based ceramic matrix composites in high-temperature combustion environments, yet knowledge of oxygen diffusion in these coatings is limited. This study investigates oxygen diffusion dynamics in the β-RE 2 Si 2 O 7 system to minimize oxygen penetration in rare earth disilicates. We analyze defect formation energy under varying oxygen conditions, identifying key diffusion mechanisms. In oxygen-rich environments, the most favorable neutral interstitial oxygen diffuses along the [110] direction. In oxygen-poor conditions, neutral oxygen vacancies rotate around Y and Si atoms, exhibiting a diffusivity of 6.59×10 −22 m 2 /s at 1500 K for β-Yb 2 Si 2 O 7 . Under intermediate oxygen levels, charged interstitial oxygen diffuses via concerted interstitialcy along the [001] direction with a diffusivity of 6.21×10 −17 m 2 /s. Additionally, alloying rare earth Y with Er and Yb increases diffusion barriers, contributing to improved EBC performance in extreme environments. The insights gained provides valuable guidance for designing robust coatings tailored to withstand extreme operational environments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Constraining Interlayer Slipping in P2-Type Layered Oxides with Oxygen Redox by Constructing Strong Covalent Bonds

Lattice oxygen redox (LOR) in P2-type layered oxides is an effective strategy to break through the limit of energy density of conventional cathodes due to its high redox potential (>4 V vs. Na + /Na) as well as extra capacity. Nevertheless, LOR induced local structure distortion and irreversible phase transitions cause serious electrochemical performance degradation, hindering the practical applications. In this work, we propose that the generation of the OP4 phase can be replaced with the Z phase by introducing Sb element with higher ionic potential and strong covalent bonds within the TMO 6 octahedron. Z phase transition is realized by constraining interlayer slipping between adjacent TM layers compared to OP4, which reduces the strain in the layered structure, lowers the Na+ diffusion energy barrier and creates more efficient Na+ diffusion channels. Consequently, Sb-substituted oxides demonstrates excellent kinetics, rate capability (79 mAh g -1 at 1 A g -1 ) in half cell and a high energy density of 487 Wh kg -1 (on cathode) in full cell.

25 ENERGY STORAGE↗
DOE OSTI2025

Integrative mapping reveals molecular features underlying the mechanism of nucleocytoplasmic transport

Nuclear pore complexes (NPCs) enable rapid, selective, and robust nucleocytoplasmic transport. To explain how transport emerges from the system components and their interactions, we used experimental data and theoretical information to construct an integrative Brownian dynamics model of transport through an NPC, coupled to a kinetic model of transport in the cell. The model recapitulates key aspects of transport for a wide range of molecular cargoes, including preribosomes and viral capsids. Our model quantifies how flexible phenylalanine-glycine (FG) repeat proteins create an entropic barrier to passive diffusion and how this barrier is selectively lowered in facilitated diffusion by the many transient interactions of nuclear transport receptors with the FG repeats. Selective transport is enhanced by “fuzzy” multivalent interactions, redundant FG repeat mass, coupling to the energy-dependent RanGTP concentration gradient, and exponential dependence of transport kinetics on the transport barrier. Our model will facilitate rational modulation of the NPC and its artificial mimics.

Raveh, Barak [School of Computer Science and Engin↗
DOE OSTI2025

In Situ Atomic Tracking on the Interfacial Etching and Reconfiguration of Cu-ReSe 2 Contact during Thermal Annealing

The Schottky barrier height can be greatly affected by the metal diffusion, reaction, and covalent bonding formation at the contact. Exploring novel methods and revealing the fundamental mechanisms for contact engineering are of vital importance for microelectronic devices. Here, in this study, the annealing induced interfacial reactions at Cu-ReSe 2 contact are dynamically revealed from the atomic scale. Accompanied by the diffusion of Se to Cu, ReSe 2 is gradually decomposed to a thin Re interlayer through a “chain-by-chain” manner. Theoretical calculations show that the Cu atoms can facilitate the chemical bond breaking of ReSe 2 , significantly lowering the Se diffusion energy barrier toward Cu. The formed Re/ReSe 2 heterostructure presents a metal-like band structure, which underscores the critical role of Cu in altering the interfacial chemistry and promoting carrier transport across the interface. Our results can provide vital insights into the contact properties of ReSe 2 and provide a possible method for fabricating high-performance ReSe 2 -based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Vacancy-Dependent Diffusion Mechanism in Oxygen-Defective SrFeO 3 Perovskite Materials: First-Principles Density Functional Theory and Experimental Approach

Understanding oxygen diffusion at the atomic scale in SrFeO 3−δ perovskites is crucial for developing oxygen storage materials with optimal performance. Such materials are required to have high stability, corrosion resistance, and acceptable oxygen storage capacity at moderate operating temperatures and pressures. Here, in this study, we used first-principles density functional theory and thermogravimetric analysis to study the vacancy-dependent oxygen diffusion in oxygen-deficient SrFeO 3−δ (δ = 0, 0.065, 0.125, 0.25, 0.5) perovskites. The electronic structures, including the partial- and spin-resolved density of states, for different SrFeO 3−δ phases were calculated and compared with available experimental and theoretical results. By mapping the migration pathways, we investigated diffusion mechanisms and calculated the energy barriers for oxygen diffusion in cubic, orthorhombic, and brownmillerite phases of SrFeO 3−δ perovskites. Using the calculated energy barriers, we deduced the diffusion time scales and diffusion coefficients within SrFeO 3−δ . A diffusion coefficient on the order of 10 –8 m 2 /s was obtained for SrFeO 2.875 . We experimentally investigated the roles of temperature and oxygen partial pressures on the redox kinetics and deduced the kinetics rate and diffusion density, which agreed well with the calculated values for the density of diffusing oxygen vacancy in the lattice. Our results showed that the energy barrier tends to reduce at higher oxygen concentrations. Our results serve as an important guideline for designing oxygen storage materials with optimal redox kinetics.

chemical looping with oxygen uncoupling (CLOU)↗
DOE OSTI2026

A comprehensive first-principles study of the effects of the exchange-correlation functional and magnetism on defect and diffusion properties of the CoCrNi medium-entropy alloy

The present work is a novel, systematic study of the effect of density functional theory input parameters on the vacancy formation energy (VFE), migration barrier for diffusion, and electronic structure for each element in the CoCrNi medium-entropy alloy (MEA). In particular, the novelties include: (1) calculating the aforementioned properties of Co, Cr, or Ni, in the CoCrNi MEA using magnetic and non-magnetic states, and two versions of the generalized gradient approximation: Perdew, Burke, and Ernzerhof (PBE) and the PBE version for solids (PBEsol), and (2) a detailed comparison of 0 K activation energy to experimental creep activation energies. First-principles calculations at 0 K are performed using the Vienna ab-initio simulation package. Special quasirandom structures (SQS) and Widom-type substitution are employed. For each element, Co, Cr, or Ni, non-magnetic calculations result in a higher VFE and larger range of calculated values for the configurations studied. The averaged migration barrier is the highest for Co in the CoCrNi for three of four sets of calculation parameters in the configurations studied. Finally, the results indicate that the average 0 K activation energy for diffusion makes up 70–80% of the experimental creep activation energy, depending on the exchange-correlation functional employed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

External Magnetic Field Suppression of Carbon Diffusion in Iron

External magnetic fields reduce diffusion of carbon in BCC iron, but the physical mechanism is not understood. Using DFT calculations with magnetic moments sampled from a Heisenberg model, we calculate diffusivities of carbon in iron at high temperatures and with field. Our model reproduces the measured suppression of diffusivity from field. Here, we find that increasing magnetic disorder flattens the electron density of states compared with the ferromagnetic case, which distorts the octahedral cages around carbon, lowering the activation barrier to diffusion; an applied field reverses these trends.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shear Response of Ionizable Polymer Melts at the Crossover from Ionomers to Polyelectrolytes

Nonlinear shear response of polymers is affected by inherent barriers for diffusive motion, including entanglements and topology. In ionizable polymers, ionic clusters further constrain the intrinsic dynamics of the polymers, significantly enhancing their viscosity. Here, using fully atomistic molecular dynamics simulations, the nonlinear shear response of ionizable polymers is presented, across the transition from the ionomer regime where distinctive clusters dominate the structure to the polyelectrolyte regime where clusters percolate, in polystyrene randomly sulfonated with fractions of SO 3 − groups of f = 0.20 and 0.35, in pristine and tetrahydrofuran (THF) swollen polyelectrolyte melts. For f = 0.20, the ionic clusters first fracture into smaller clusters followed by splitting into individual ionic groups and eventually reform. At higher f, the clusters morph in shape but do not break under high shear. At very high shear rates, all of the chains stretch and recoil rapidly. As the shear rate is reduced, some chains stretch and recoil, while others remain largely unaffected by the shear. Macroscopically, for all systems, the shear viscosity displays initially an elastic response, followed by nonlinear shear stress overshoot and, eventually, a steady state. The evolution of viscosity with time and shear reflects that of the ionizable domains.

cluster chemistry↗
DOE OSTI2025

Kinetic Monte Carlo simulations of aging in δ -Pu

We have developed a first-passage kinetic Monte Carlo approach for materials aging to investigate the sensitivity of void swelling to model parameters, including helium bubble density and size distribution. In addition to explicitly accounting for the spatial distribution of individual point defects, bubbles, and voids, our approach can simulate total doses equivalent to 100 years of natural aging on statistically representative volumes of materials. This technique enables us to study the effects on swelling and radiation damage evolution due to temperature and dose rate (as altered in artificially aged experiments), differences in effective interaction radii between vacancies and interstitials, and varying defect diffusion activation energies, while providing more detailed information than previous rate-equation based approaches. In conclusion, our results indicate that spatial effects that are not modeled in mean-field rate theories could play a significant role in void swelling initiation and growth for certain regimes of model parameters.

Actinides↗