Technology for space shuttle main engine control checkout and diagnosis /GP 70-232/
Electronic control for space shuttle main engine
Emerson, L. D.↗
SEARCH · Search NASA
Results for “electron shuttles”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Tethered Balloon Current Generator - A space shuttle-tethered subsatellite for plasma studies and power generation
The objectives of the Tethered Balloon Current Generator experiment are to: (1) generate relatively large regions of thermalized, field-aligned currents, (2) produce controlled-amplitude Alfven waves, (3) study current-driven electrostatic plasma instabilities, and (4) generate substantial amounts of power or propulsion through the MHD interaction. A large balloon (a diameter of about 30 m) will be deployed with a conducting surface above the space shuttle at a distance of about 10 km. For a generally eastward directed orbit at an altitude near 400 km, the balloon, connected to the shuttle by a conducting wire, will be positive with respect to the shuttle, enabling it to collect electrons. At the same time, the shuttle will collect positive ions and, upon command, emit an electron beam to vary current flow in the system.
Williamson, P. R.↗
A study program on large aperture electronic scanning phased array antennas for the shuttle imaging microwave system
Fundamental phased array theory and performance parameters are discussed in terms of their application to microwave radiometry, and four scanning phased arrays representing current examples of state-of-the-art phased array technology are evaluated for potential use as components of the multispectral antenna system for the space shuttle imaging microwave system (SIMS). A discussion of problem areas, both in performance and fabrication is included, with extrapolations of performance characteristics for phased array antennas of increased sizes up to 20 m by 20 m. The possibility of interlacing two or more phased arrays to achieve a multifrequency aperture is considered, and, finally, a specific antenna system is recommended for use with SIMS.
Source record↗
A comparison of paper and computer procedures in a Shuttle flight environment
The Electronic Procedures Experiment (EPROC) was flown as part of the Human Factors Assessment (HFA) experiment aboard the SpaceHab-1/STS-57 mission. EPROC is concerned with future, longer-duration missions which will increasingly rely on electronic procedures since they are more easily launched, updated in-flight, and offer automatic or on-request capabilities not available with paper. A computer-based task simulating a Space Station Propulsion System task was completed by one crewmember. The crewmember performed the task once using paper and once using computer procedures. A soldering and desoldering task was performed by another crewmember. Soldering was completed with paper procedures and desoldering was completed using computer procedures. Objective data was collected during each task session from the computer programs, videotapes, and crew notations in the paper and computer procedures. After each task session, subjective data was collected through the use of a computer-based questionnaire program. Resultant recommendations will be made available to future designers of electronic procedures systems for manned-space missions and other related uses.
Michael O'Neal↗
Application of Electron Microscopy Techniques to the Investigation of Space Shuttle Columbia Accident
This viewgraph presentation gives an overview of the investigation into the breakup of the Space Shuttle Columbia, and addresses the importance of a failure analysis strategy for the investigation of the Columbia accident. The main focus of the presentation is on the usefulness of electron microscopy for analyzing slag deposits from the tiles and reinforced carbon-carbon (RCC) wing panels of the Columbia orbiter.
Shah, Sandeep↗
An analysis of whistler mode radiation from the Spacelab 2 electron beam
During the Spacelab 2 mission the plasma diagnostics package (PDP) was released from the Shuttle to free fly. At times during this free flight, when the PDP was magnetically connected to the Shuttle, Stanford's fast-pulsed electron generator, located in the Shuttle cargo bay, ejected a 1-keV 50-mA electron beam. The PDP plasma-wave instrument detected intense whistler-mode radiation during these beam ejections. This paper presents a study of a whistler mode emission detected during one particular continuous electron beam firing. Calculations indicate that the beam radiated approximately 1.6 mW in the whistler mode as the beam traversed the 200 m from the Shuttle to the PDP. The emissivity also decreased by about a factor of 10 over this same distance. The measured wave powers are 10 to the 7th greater than wave powers expected from incoherent Cerenkov radiation, verifying that the radiation is generated by a coherent process. Estimates of the emissivity based on measured electric field intensities in the beam indicate that the whistler-mode noise is produced by radiation from electron bunches created by an electrostatic beam-plasma instability.
Farrell, W. M.↗
Astronomy sortie missions definition study. Volume 3, book 2: Appendix: Design analysis and trade studies
Backup or supporting data for the design analyses and trade studies which defined the astronomy sortie missions are presented. The subjects discussed are: (1) configuration of space shuttle orbiter, (2) electronic subsystems, (3) electric power requirements, and (4) payload requirements. Mathematical models are developed to illustrate the orbital rendezvous capabilities.
Source record↗
A plasma generator utilizing the high intensity ASTROMAG magnets
The magnet configuration for the proposed particle astrophysics magnet facility (ASTROMAG) on the space station includes a cusp magnetic field with an intensity of a few tesla. With these large magnets (or others) located in the outer ionosphere, many quite interesting and unique plasma physics experiments become possible. First there are studies utilizing the magnet alone to examine the supersonic, sub-Alfvenic interaction with the ambient medium; the scale length for the magnet perturbation is approx. 20 m. The magnetic field geometry when combined with the Earth's and their relative motion will give rise to a host of plasma phenomena: ring nulls, x-points, ion-acoustic and lower-hybrid shocks, electron heating (possible shuttle glow without a surface) launching of Alfvenwaves, etc. Second, active experiments are possible for a controlled study of fundamental plasma phenomena. A controlled variable species plasma can be made by using an RF ion source; use of two soft iron rings placed about the line cusp would give an adequate resonance zone (ECH or ICH) and a confining volume suitable for gas efficiency. The emanating plasma can be used to study free expansion of plasma along and across field lines (polar wind), plasma flows around the space platform, turbulent mixing in the wake region, long wavelength spectrum of convecting modes, plasma-dust interactions, etc.
Sullivan, James D.↗
Research Reports: 1988 NASA/ASEE Summer Faculty Fellowship Program
The basic objectives are to further the professional knowledge of qualified engineering and science faculty members; to stimulate an exchange of ideas between participants and NASA: to enrich and refresh the research and teaching activities of the participants' institutions; and to contribute to the research objectives of the NASA centers. Topics addressed include: cryogenics; thunderstorm simulation; computer techniques; computer assisted instruction; system analysis weather forecasting; rocket engine design; crystal growth; control systems design; turbine pumps for the Space Shuttle Main engine; electron mobility; heat transfer predictions; rotor dynamics; mathematical models; computational fluid dynamics; and structural analysis.
Freeman, L. Michael↗
Monitoring space shuttle air quality using the Jet Propulsion Laboratory electronic nose
A miniature electronic nose (ENose) has been designed and built at the Jet Propulsion Laboratory (JPL), Pasadena, CA, and was designed to detect, identify, and quantify ten common contaminants and relative humidity changes. The sensing array includes 32 sensing films made from polymer carbon-black composites. Event identification and quantification were done using the Levenberg-Marquart nonlinear least squares method. After successful ground training, this ENose was used in a demonstration experiment aboard STS-95 (October-November, 1998), in which the ENose was operated continuously for six days and recorded the sensors' response to the air in the mid-deck. Air samples were collected daily and analyzed independently after the flight. Changes in shuttle-cabin humidity were detected and quantified by the JPL ENose; neither the ENose nor the air samples detected any of the contaminants on the target list. The device is microgravity insensitive.
manned↗
Interface Circuit Board For Space-Shuttle Communications
Report describes interface electronic circuit developed to enable ground controllers to send commands and data via Ku-band radio uplink to multiple circuits connected to standard IEEE-488 general-purpose interface bus in space shuttle. Design of circuit extends data-throughput capability of communication system.
Parrish, Brett T.↗
Electronics Shielding and Reliability Design Tools
It is well known that electronics placement in large-scale human-rated systems provides opportunity to optimize electronics shielding through materials choice and geometric arrangement. For example, several hundred single event upsets (SEUs) occur within the Shuttle avionic computers during a typical mission. An order of magnitude larger SEU rate would occur without careful placement in the Shuttle design. These results used basic physics models (linear energy transfer (LET), track structure, Auger recombination) combined with limited SEU cross section measurements allowing accurate evaluation of target fragment contributions to Shuttle avionics memory upsets. Electronics shielding design on human-rated systems provides opportunity to minimize radiation impact on critical and non-critical electronic systems. Implementation of shielding design tools requires adequate methods for evaluation of design layouts, guiding qualification testing, and an adequate follow-up on final design evaluation including results from a systems/device testing program tailored to meet design requirements.
Wilson, John W.↗
Scanning electron microscope observations of brine shrimp larvae from space shuttle experiments
Brine shrimp are encysted as gastrula stage embryos, and may remain dehydrated and encysted for years without compromising their viability. This aspect of brine shrimp biology is desirable for studying development of animals during space shuttle flight, as cysts placed aboard a spacecraft may be rehydrated at the convenience of an astronaut, guaranteeing that subsequent brine shrimp development occurs only on orbit and not on the pad during launch delays. Brine shrimp cysts placed in 5 ml syringes were rehydrated with salt water and hatched during a 9 day space shuttle mission. Subsequent larvae developed to the 8th larval stage in the sealed syringes. We studied the morphogenesis of the brine shrimp larvae and found the larvae from the space shuttle experiments similar in rate of growth and extent of development, to larvae grown in sealed syringes on the ground. Extensive differentiation and development of embryos and larvae can occur in a microgravity environment.
short duration↗
Studies of beam plasma interactions in a space simulation chamber using prototype Space Shuttle instruments
In March, 1981, electron beam experiments were conducted in a large space simulation chamber using equipment destined to be flown aboard NASA's Office of Space Science-1 pallet (OSS-1). Two major flight experiments were involved. They include the Vehicle Charging and Potential (VCAP) experiment and the Plasma Diagnostics Package (PDP). Apparatus connected with VCAP included a Fast Pulse Electron Gun (FPEG), and a Charge and Current Probe (CCP). A preliminary view is provided of the results obtained when the electron emissions were held steady over relatively long periods of time such that steady state conditions could be obtained with respect to the electron beam interaction with the neutral gases and plasma of the vacuum chamber. Of particular interest was the plasma instability feature known as the Beam Plasma Discharge. For the present experiments the FPEG was used in a dc mode with a range of currents of 2 to 80 mA at a beam energy of 970 eV. Attention is given to the emissions of VLF and HF noise associated with the dc beam.
Banks, P. M.↗
Improved Supportability Analysis
The University of Dayton is pleased to submit this report to the National Aeronautics and Space Administration (NASA), Langley Research Center, which updates recently developed computer models and data bases used in determining operational capabilities and support requirements during the conceptual design of proposed space systems. This research has resulted in some revisions of the reliability and maintainability (R&M) model, the development of several electronic data bases which capture the original data used in the R&M model, the collection of more recent R&M aircraft data and the integration of new shuttle data into the electronic data base and the R&M model. Descriptions of the model updates and of the electronic data bases are the subject of this report. Other details concerning the R&M model and the O&S costing model may be found in previous reports accomplished under this grant (NASA Research Grant NAG- 1-1327) which are referenced in paragraph 1.3.
Ebeling, Charles E.↗
Electromagnetic fields from pulsed electron beam experiments in space - Spacelab-2 results
During the Spacelab-2 mission a small satellite carrying various plasma diagnostic instruments was released from the Shuttle to coorbit at distances up to 300 m. During a magnetic conjunction of the Shuttle and the satellite an electron beam modulated at 1.22 kHz was emitted from the Shuttle during a 7 min period. The spatial structure of the electromagnetic fields generated by the beam was observed from the satellite out to a distance of 153 m perpendicular to the beam. The magnetic field amplitude of the strongest harmonics were comparable to the amplitude of simultaneously observed whistlers, while the electric field amplitudes were estimated to 1-10 mV/m.
Bush, R. I.↗
The prevention of electronical breakdown and electrostatic voltage problems in the space shuttle and its payloads. Part 2: Design guides and operations considerations
The specific electrical discharge problems that can directly affect the shuttle vehicle and its payloads are addressed. General design guidelines are provided to assist flight hardware managers in minimizing these kinds of problems. Specific data are included on workmanship practices and system testing while in low pressure environments. Certain electrical discharge problems that may be unique to the design of the shuttle vehicle itself and to its various mission operational models are discussed.
Whitson, D. W.↗
The plasma wake of the Shuttle Orbiter
One of the objectives of the Plasma Diagnostics Package (PDP) instrumentation on Spacelab 2 was to obtain information about the plasma wake of the Shuttle Orbiter. Plasma density and electron temperature data are presented, which were obtained while the PDP was attached to the Shuttle remote manipulator system, and while the PDP was a free-flying satellite. Wake crossings by the PDP from about 40 m to about 240 m behind the Orbiter provide information about the structure of the mid and far wake of the Orbiter. As expected, the wake is characterized by density depressions, relative to the ambient ionospheric plasma, and by enhancements of the electron temperature, particularly in the near and mid wake. The observed electron temperature enhancements appear to be in line with previous spacecraft observations.
Murphy, G. B.↗