Search NASA⌕ Search

SEARCH · Search NASA

Results for “five”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

H-alpha spectra of dynamic chromospheric processes in five well-observed X-ray flares

Simultaneous H-alpha and hard X-ray (HXR) spectra were obtained for five solar flares to determine the relationship of H-alpha profiles and the nonthermal part of the flare represented by the hard X-ray burst. All five flares exhibited impulsive-phase redshifted H-alpha in emission, which was temporarily and spatially associated with intense HXR emission and broad impulsive-phase H-alpha wings. A few small regions within two flares showed a blueshifted H-alpha emission which appeared only early in the impulsive phase and was temporally correlated with the HXR emission but not with broad H-alpha wings. Finally, there were both redshifted and blueshifted absorption spectra with properties fully consistent with those known for erupting and untwisting filaments.

Canfield, Richard C.↗
NASA NTRS1990

Flare heating and ionization of the low solar chromosphere. II - Observations of five solar flares

Two neutral Mg spectral lines formed in the temperature-minimum region and the low chromosphere, at 4571 and 5173 A, are used to quantify the changes in the atmospheric structure as a function of time during five solar flares. Eight proposed flare heating and ionization mechanisms and predictions of the effects of each on the temperature minimum region are discussed. Two Mg spectral observations made at the National Solar Observatory (Sacramento Peak), along with observations of hard and soft X-rays from the SMM and GOES satellites, are compared to the predictions of the eight proposed mechanisms. The initial effects in all five flares are consistent with backwarming by enhanced Balmer- and Paschen-continuum radiation originating in the upper chromosphere. Extended heating observed in two of the flares is most likely due to UV irradiation. In all cases heating by the dissipation of nonreversed electric currents, collisions with an electron or proton beam, irradiation by soft X-rays, and dissipation of Alfven waves are eliminated.

Metcalf, Thomas R.↗
NASA NTRS1990

Five basic steps to problem trending

Five basic steps to problem trending evolved from experience in trending problems on Space Shuttle hardware are discussed: extracting data; constructing a Pareto chart of all failure modes; constructing normalized subsystem, component, and failure-mode trend charts; identifying trend direction; and providing a summary assessment. The five-step method has been useful for identifying failure modes of concern, evaluating the effectiveness of corrective actions, and determining funding allocation.

Bombara, Elwood L.↗
NASA NTRS1992

Evaluation of the mechanical properties and damage tolerance of five new toughened matrix composite materials

Notched and unnotched tension and compression properties of quasi-isotropic laminates are presently evaluated, in conjunction with compression-after-impact (CAI) strengths, for the cases of five different carbon fiber-reinforced/toughened matrix composites. For a given impact energy, CAIs were dependent on impact velocities. When compared with other matrix-toughened materials, the five presently considered were more damage-tolerant than such aircraft primary structure composite systems as T300/5208.

Cano, Roberto J.↗
NASA NTRS1992

A search for microvariability in five OVV quasars

We present results of monitoring a sample of five OVV qausars in an effort to determine if these types of AGNs exhibit microvariability similar to that detected for BL Lacertae objects. Three of the five quasars investigated clearly exhibited microvariability. The timescales for the variations for both BL Lacertae objects and OVV quasars are similar which suggests that the radiation is generated in similar spatial volumes. These variations are consistent with the results of models which explain the observed microvariability as the result of excess emission produced by flares or hot spots randomly appearing and disappearing on the accretion disks around supermassive black holes.

Miller, H. R.↗
NASA NTRS1993

Structural design and analysis of a Mach zero to five turbo-ramjet system

The paper discusses the structural design and analysis of a Mach zero to five turbo-ramjet propulsion system for a Mach five waverider-derived cruise vehicle. The level of analysis detail necessary for a credible conceptual design is shown. The results of a finite-element failure mode sizing analysis for the engine primary structure is presented. The importance of engine/airframe integration is also discussed.

Spoth, Kevin A.↗
NASA NTRS1928

Characteristics of Five Propellers in Flight

This investigation was made for the purpose of determining the characteristics of five full-scale propellers in flight. The equipment consisted of five propellers in conjunction with a VE-7 airplane and a Wright E-2 engine. The propellers were of the same diameter and aspect ratio. Four of them differed uniformly in thickness and pitch and the fifth propeller was identical with one of the other four with exception of a change of the airfoil section. The propeller efficiencies measured in flight are found to be consistently lower than those obtained in model tests. It is probable that this is mainly a result of the higher tip speeds used in the full-scale tests. The results show also that because of differences in propeller deflections it is difficult to obtain accurate comparisons of propeller characteristics. From this it is concluded that for accurate comparisons it is necessary to know the propeller pitch angles under actual operating conditions. (author)

Crowley, J W , Jr↗
NASA NTRS1958

An Analysis of Pressure Studies and Experimental and Theoretical Downwash and Sidewash Behind Five Pointed-Tip Wings at Supersonic Speeds

Flow-angle and pressure surveys behind five, thin, pointed-tip wings of varying plan form have been made at Mach numbers 1.62 and 2.41. Schlieren studies at a Mach number 1.93 for the same five plan-form wings were made to illustrate the behavior of the vortex sheet. The surveys were conducted at 1.5, 3, and 4 root chords behind three triangular wings of 50 degree, 63 degree, and 72 degree leading-edge sweep angle, and behind the 50 degree triangular wing reversed. The flow behind a pointed-tip wing having a sweptback leading edge and a sweptforward trailing edge (both 50 degrees) was also surveyed. Experiment and one of the theoretical methods are compared for the reversed triangular wing and the pointed-tip wing with the 50 degree sweptback leading edge and sweptforward trailing edge.

Boatright, William B↗
NASA NTRS1993

Five biomedical experiments flown in an Earth orbiting laboratory: Lessons learned from developing these experiments on the first international microgravity mission from concept to landing

There are numerous problems associated with accommodating complex biological systems in microgravity in the flexible laboratory systems installed in the Orbiter cargo bay. This presentation will focus upon some of the lessons learned along the way from the University laboratory to the IML-1 Microgravity Laboratory. The First International Microgravity Laboratory (IML-1) mission contained a large number of specimens, including: 72 million nematodes, US-1; 3 billion yeast cells, US-2; 32 million mouse limb-bud cells, US-3; and 540 oat seeds (96 planted), FOTRAN. All five of the experiments had to undergo significant redevelopment effort in order to allow the investigator's ideas and objectives to be accommodated within the constraints of the IML-1 mission. Each of these experiments were proposed as unique entities rather than part of the mission, and many procedures had to be modified from the laboratory practice to meet IML-1 constraints. After a proposal is accepted by NASA for definition, an interactive process is begun between the Principal Investigator and the developer to ensure a maximum science return. The success of the five SLSPO-managed experiments was the result of successful completion of all preflight biological testing and hardware verification finalized at the KSC Life Sciences Support Facility housed in Hangar L. The ESTEC Biorack facility housed three U.S. experiments (US-1, US-2, and US-3). The U.S. Gravitational Plant Physiology Facility housed GTHRES and FOTRAN. The IML-1 mission (launched from KSC on 22 Jan. 1992, and landed at Dryden Flight Research Facility on 30 Jan. 1992) was an outstanding success--close to 100 percent of the prelaunch anticipated science return was achieved and, in some cases, greater than 100 percent was achieved (because of an extra mission day).

Winget, C. M.↗
NASA NTRS1994

An X-ray study of five supernova remnants in the Carina spiral arm

The ROSAT Position Sensitive Proportional Counter (PSPC) is used to perform an exploratory study of four fields in the Carina spiral arm containing five radio supernova remnants, only one of which has previously been studied in X-rays. We present upper limits for the detection in X-rays of G298.5 - 0.3, G298.6 - 0.0, and G299.0+0.2, and report a 4 sigma detection of G296.8-0.3. In addition, we present detailed spatial and spectral analysis of the bright X-ray remnant G296.1-0.7, which has previously been studied by both the Einstein IPC and EXOSAT LE/CMA. We detect relatively slight, but statistically significant, variations in the spectrum across the remnant via spatially resolved spectral fits and a study of the spatial variation of hardness ratios. In general, the spectrum is characteristic of a thermal plasma with kT about 0.2 keV and N(sub H) about 1.5 x 10(exp 21/sq. cm). The total X-ray emitting mass is estimated to be about 250 solar mass for an optically estimated distance of 4 kpc to the remnant. At this distance, the linear dimensions of the remnant are roughly 35 - 50 pc, implying an age on the order of 20,000 yr. Assuming that X-ray and radio brightnesses are related by SIGMA(sub R) proportional to SIGMA(exp 0.69)(sub X) and that the four radio remnants have X-ray spectral characteristics similar to G296.1-0.7, we find that the column densities to these sources must be several times 10(exp 22)/sq cm in order to explain their low X-ray count rates. This column density is considerably in excess of the X-ray fitted column density to G296.1-0.7, but is comparable to the total column densities in H I measured via the 21 cm line in the directions to all five remnants. This implies that G296.1 - 0.7 is at a significantly smaller distance than the other remnants.

Hwang, Una↗
NASA NTRS1995

Five-Channel Polychromator Head

Five-channel polychromator head samples Raman-scattering spectrum simultaneously at five wavelengths. Each channel consists of 1-mm fiber-optic cable that is individually translatable along dispersion axis of spectrometer to provide both flexibility and fine-tuning capability. Laser raman thermometer not thermometer in usual sense of word, but noncontact spectrometer that measures temperature indirectly in terms of relative intensities of selected Raman-scattering spectral lines.

Eskridge, Richard↗
NASA NTRS1998

Comparison of Five System Identification Algorithms for Rotorcraft Higher Harmonic Control

This report presents an analysis and performance comparison of five system identification algorithms. The methods are presented in the context of identifying a frequency-domain transfer matrix for the higher harmonic control (HHC) of helicopter vibration. The five system identification algorithms include three previously proposed methods: (1) the weighted-least- squares-error approach (in moving-block format), (2) the Kalman filter method, and (3) the least-mean-squares (LMS) filter method. In addition there are two new ones: (4) a generalized Kalman filter method and (5) a generalized LMS filter method. The generalized Kalman filter method and the generalized LMS filter method were derived as extensions of the classic methods to permit identification by using more than one measurement per identification cycle. Simulation results are presented for conditions ranging from the ideal case of a stationary transfer matrix and no measurement noise to the more complex cases involving both measurement noise and transfer-matrix variation. Both open-loop identification and closed- loop identification were simulated. Closed-loop mode identification was more challenging than open-loop identification because of the decreasing signal-to-noise ratio as the vibration became reduced. The closed-loop simulation considered both local-model identification, with measured vibration feedback and global-model identification with feedback of the identified uncontrolled vibration. The algorithms were evaluated in terms of their accuracy, stability, convergence properties, computation speeds, and relative ease of implementation.

Jacklin, Stephen A.↗
NASA NTRS1999

Five-Hole Flow Angle Probe Calibration for the NASA Glenn Icing Research Tunnel

A spring 1997 test section calibration program is scheduled for the NASA Glenn Research Center Icing Research Tunnel following the installation of new water injecting spray bars. A set of new five-hole flow angle pressure probes was fabricated to properly calibrate the test section for total pressure, static pressure, and flow angle. The probes have nine pressure ports: five total pressure ports on a hemispherical head and four static pressure ports located 14.7 diameters downstream of the head. The probes were calibrated in the NASA Glenn 3.5-in.-diameter free-jet calibration facility. After completing calibration data acquisition for two probes, two data prediction models were evaluated. Prediction errors from a linear discrete model proved to be no worse than those from a full third-order multiple regression model. The linear discrete model only required calibration data acquisition according to an abridged test matrix, thus saving considerable time and financial resources over the multiple regression model that required calibration data acquisition according to a more extensive test matrix. Uncertainties in calibration coefficients and predicted values of flow angle, total pressure, static pressure. Mach number. and velocity were examined. These uncertainties consider the instrumentation that will be available in the Icing Research Tunnel for future test section calibration testing.

Gonsalez, Jose C.↗
NASA NTRS1999

Five-Segment Reusable Solid Rocket Booster Upgrade

The Five Segment Reusable Solid Rocket Booster (RSRB) feasibility status is presented in viewgraph form. The Five Segment Booster (FSB) objective is to provide a low cost, low risk approach to increase reliability and safety of the Shuttle system. Topics include: booster upgrade requirements; design summary; reliability issues; booster trajectories; launch site assessment; and enhanced abort modes.

Sauvageau, Don↗
NASA NTRS2000

An Assessment of Five Modeling Approaches for Thermo-Mechanical Stress Analysis of Laminated Composite Panels

A study is made of the effects of variation in the lamination and geometric parameters, and boundary conditions of multi-layered composite panels on the accuracy of the detailed response characteristics obtained by five different modeling approaches. The modeling approaches considered include four two-dimensional models, each with five parameters to characterize the deformation in the thickness direction, and a predictor-corrector approach with twelve displacement parameters. The two-dimensional models are first-order shear deformation theory, third-order theory; a theory based on trigonometric variation of the transverse shear stresses through the thickness, and a discrete layer theory. The combination of the following four key elements distinguishes the present study from previous studies reported in the literature: (1) the standard of comparison is taken to be the solutions obtained by using three-dimensional continuum models for each of the individual layers; (2) both mechanical and thermal loadings are considered; (3) boundary conditions other than simply supported edges are considered; and (4) quantities compared include detailed through-the-thickness distributions of transverse shear and transverse normal stresses. Based on the numerical studies conducted, the predictor-corrector approach appears to be the most effective technique for obtaining accurate transverse stresses, and for thermal loading, none of the two-dimensional models is adequate for calculating transverse normal stresses, even when used in conjunction with three-dimensional equilibrium equations.

Noor, A. K.↗
NASA NTRS2002

The IAB Iron-Meteorite Complex: A Group, Five Subgroups, Numerous Grouplets, Closely Related, Mainly Formed by Crystal Segregation in Rapidly Cooling Melts

We present new data or iron meteorites that are members of group IAB or are closely related to this large group, and we have also reevaluated some of our earlier data for these irons. In the past it was not possible to distinguish IAB and IIICD irons on the basis of their positions on element-Ni diagrams. We now find that plotting, the new and revised data yields six sets of compact fields on element-Au diagrams, each set corresponding to a compositional group. The largest set includes the majority (approximately equal to 70) of irons previously designated IA: We christened this set the IAB main group. The remaining five sets we designate subgroups within the IAB complex. Three of these subgroups have Au contents similar to the main group, and form parallel trends in most element-Ni diagrams. The groups originally designated IIIC and IIID are two of these subgroups: they are now well resolved from each other and from the main group. The other low-Au subgroup has Ni contents just above the main group. Two other IAB subgroups have appreciably higher Au contents than the main group and show weaker compositional links to it. We have named these five subgroups on the basis of their Au and Ni contents. The three subgroups having Au contents similar to the main group are the low-Au (L) subgroups the two others the high-Au (H) subgroups. The Ni contents are designated high (H), medium (M), or low (L). Thus the old group IIID is now the sLH subgroup. the old group IIIC is the sLM subgroup. In addition, eight irons assigned to two grouplets plot between sLL and sLM on most element-Au diagrams. A large number (27) of related irons plot outside these compact fields but nonetheless appear to be sufficiently related to also be included in the IAB complex.

Wasson, J. T.↗
NASA NTRS2003

Achieving Space Shuttle Abort-to-Orbit Using the Five-Segment Booster

The Five-Segment Booster design concept was evaluated by a team that determined the concept to be feasible and capable of achieving the desired abort-to-orbit capability when used in conjunction with increased Space Shuttle main engine throttle capability. The team (NASA Johnson Space Center, NASA Marshall Space Flight Center, ATK Thiokol Propulsion, United Space Alliance, Lockheed-Martin Space Systems, and Boeing) selected the concept that provided abort-to-orbit capability while: 1) minimizing Shuttle system impacts by maintaining the current interface requirements with the orbiter, external tank, and ground operation systems; 2) minimizing changes to the flight-proven design, materials, and processes of the current four-segment Shuttle booster; 3) maximizing use of existing booster hardware; and 4) taking advantage of demonstrated Shuttle main engine throttle capability. The added capability can also provide Shuttle mission planning flexibility. Additional performance could be used to: enable implementation of more desirable Shuttle safety improvements like crew escape, while maintaining current payload capability; compensate for off nominal performance in no-fail missions; and support missions to high altitudes and inclinations. This concept is a low-cost, low-risk approach to meeting Shuttle safety upgrade objectives. The Five-Segment Booster also has the potential to support future heavy-lift missions.

Craft, Joe↗
NASA NTRS1990

Similarity of urinary risk factors among stone-forming patients in five regions of the United States

Study Objective: To compare urinary biochemical risk factors among stone-forming patients in the Southeast (SE) or "stone belt" versus four other regions of the United States. Design: Prospective biochemical survey for regional comparisons. Setting: Referral-based nephrolithiasis clinics, urologists, nephrologists, and family practitioners. Patients: Consecutive sample of 3473 stone-forming patients who submitted 24-hour urine collections for biochemical analyses of stone-forming risk factors. Interventions: None. Subjects taking medication known to interfere with stone-forming risk factors were deleted from the final data compilation. Measurements and Main Results: Overall, the mean values for each urinary parameter spanned a narrow range without significant difference between the five regions. Among "metabolic" factors, 40% in the SE had hypercalciuria (> 6.25 mmol/d), compared to 35%-43% in other regions, and hyperuricosuria (> 4.2 mmol/d) was found in 16% in the SE versus 17%-19% elsewhere. Among "environmental" factors, low urine volume ( < 2 L/d) was found in 77% patients in the SE compared to 69%-78% elsewhere, and high sodium was encountered in 27% in the SE versus 24%-29% elsewhere. No differences were noted in occurrence of other abnormal risk factors: hyperoxaluria, hypocitraturia, low pH, high sulfate, high phosphorus, or low magnesium. Conclusions: Despite expected regional differences in nutritional and environmental influences, the results of this study showed a striking similarity in urinary biochemical risk factor profiles of stone-formers in all five regions of the United States.

NASA Discipline Number 18-10↗