SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Piezoelectrically actuated devices constructed from thin semiconductor membranes bonded directly to piezoelectric substrates are provided. Methods for fabricating these devices are also provided. The bonding of the semiconductor to the piezoelectric material does not require the use of any intermediate layers, such as bonding agents.
Explore the source record for details and available documents.
Uranium hexafluoride (UF 6 ) is a commonly utilized material feedstock in uranium enrichment processes due to its high vapor pressure and ease of sublimation. When exposed to air, UF 6 undergoes spontaneous hydrolysis to form uranyl fluoride (UO 2 F 2 ) particulates which are utilized for the detection of undeclared nuclear activities by nuclear safeguards organizations. In this study, the kinetics of the hydrolysis reaction and how they relate to particle morphology of the product are still debated in the literature. Here, we report the direct, in situ observation of UF 6 reaction intermediates by cooling the reaction to cryogenic temperatures to significantly reduce the rate of hydrolysis. The reaction is then observable by Fourier transform infrared (FTIR) spectroscopy. The conversion of UF 6 to UOF 4 is observed as well as several other bands associated with possible long lived intermediate complexes. Chemometrics are used to further elucidate the reaction pathway from UF 6 to UO 2 F 2 .
In this work, high-fidelity large-eddy simulation (LES) is performed of Rayleigh-Taylor (RT) mixing in three different configurations involving gravity reversal. In each configuration, LES results are compared with one-dimensional Reynolds-averaged Navier-Stokes (RANS) results, and a deficiency in a commonly used transport equation for the mass-flux velocity, $a_j$, is identified. In the first configuration, a classical two-component RT mixing layer is allowed to develop before it is subjected to rapid acceleration reversal. In the second configuration, a three-component RT mixing layer with an intermediate density layer is allowed to develop before being subjected to rapid acceleration reversal. Finally, in the third configuration, a light layer is interposed between two heavy layers; in this configuration, only one interface is RT-unstable at a time as it undergoes rapid acceleration reversal. In all cases, a commonly used buoyancy production closure in the $a_j$ transport equation is shown to lead to significant over-prediction of mixing layer growth after gravity reversal. An alternative formulation for this closure is then presented which is shown to more accurately capture the stabilization effect of gravity reversal.
A method is described that includes the steps of making a thin walled Zr alloy tube, loading nuclear fuel pellets into the tube, compressing the tube onto the fuel pellets to substantially reduce free space around the fuel pellets, positioning end plugs at each of two ends of the tube, filling the tube with a heat transferring gas, and coating the compressed tube with a corrosion resistant material using a thermal deposition process, such as cold spray, before inserting the tube into a pre-formed SiC composite cover having at least one closed end.
The nature of solid phases and cross-over of order–disorder phase transitions from two-dimensional (2D) layers to three-dimensional (3D) bulk in confined atomic systems remain largely unexplained. To this end, we consider noble gases and aluminum confined between graphene sheets at different pressures and temperatures. Using crystal structure search methods and molecular dynamics based on machine-learned potentials with quantum-mechanical accuracy, we identify structures of multilayer confined solids that deviate from simple close packing. Upon heating, we find that confined 2D monolayers melt according to the two-step continuous Kosterlitz–Thouless–Halperin–Nelson–Young theory. However, multilayer solids transition continuously into an intermediate layered-hexatic phase before melting discontinuously into an isotropic liquid. This intermediate phase persists at least up to 12 layers studied here. This change can be qualitatively understood based on the cross-over from 2D topological defects toward 3D ones during melting as the number of layers increases.
The present disclosure relates to a method that includes applying a first perovskite precursor solution to a substrate to form a first liquid film of the first perovskite precursor solution on the substrate; from the first liquid film, forming a first intermediate solid perovskite layer on the substrate; repeating at least once, both the applying and the forming, resulting in the creation of at least one additional intermediate solid perovskite layer; and treating a last intermediate solid perovskite layer, resulting from the at least one additional applying and the at least one additional forming, to create a final solid perovskite layer.
A major goal of research in evolution and genetics is linking genotype to phenotype. This work could be direct, such as determining the genetic basis of a phenotype by leveraging genetic variation or divergence in a developmental, physiological, or behavioral trait. The work could also involve studying the evolutionary phenomena (e.g., reproductive isolation, adaptation, sexual dimorphism, behavior) that reveal an indirect link between genotype and a trait of interest. When the phenotype diverges across evolutionarily distinct lineages, this genotype-to-phenotype problem can be addressed using phylogenetic genotype-to-phenotype (PhyloG2P) mapping, which uses genetic signatures and convergent phenotypes on a phylogeny to infer the genetic bases of traits. The PhyloG2P approach has proven powerful in revealing key genetic changes associated with diverse traits, including the mammalian transition to marine environments and transitions between major mechanisms of photosynthesis. However, there are several intermediate traits layered in between genotype and the phenotype of interest, including but not limited to transcriptional profiles, chromatin states, protein abundances, structures, modifications, metabolites, and physiological parameters. Each intermediate trait is interesting and informative in its own right, but synthesis across data types has great promise for providing a deep, integrated, and predictive understanding of how genotypes drive phenotypic differences and convergence. We argue that an expanded PhyloG2P framework (the PhyloG2P matrix) that explicitly considers intermediate traits, and imputes those that are prohibitive to obtain, will allow a better mechanistic understanding of any trait of interest. Furthermore, this approach provides a proxy for functional validation and mechanistic understanding in organisms where laboratory manipulation is impractical.
Abstract Background and Aims Deep roots (i.e. >1 m depth) are important for crops to access water when the topsoil is dry. Root anatomy and hydraulic conductance play important roles in the uptake of soil water, particularly water located deep in the soil. We investigated whether root and xylem anatomy vary as a function of root type, order and length, or with soil depth in roots of two deep-rooted perennial crops: intermediate wheatgrass [Thinopyrum intermedium (Kernza®)] and alfalfa (Medicago sativa). We linked the expression of these anatomical traits to the plants’ capacity to take up water from deep soil layers. Methods Using laser ablation tomography, we compared the roots of the two crops for cortical area, number and size of metaxylem vessels, and their estimated root axial hydraulic conductance (ERAHCe). The deepest roots investigated were located at soil depths of 2.25 and at 3.5 m in the field and in rhizoboxes, respectively. Anatomical differences were characterized along 1-m-long individual roots, among root types and orders, as well as between environmental conditions. Key Results For both crops, a decrease in the number and diameter, or both, of metaxylem vessels along individual root segments and with soil depth in the field resulted in a decrease in ERAHCe. Alfalfa, with a greater number of metaxylem vessels per root throughout the soil profile and, on average, a 4-fold greater ERAHCe, took up more water from the deep soil layers than intermediate wheatgrass. Root anatomical traits were significantly different across root types, classes and growth conditions. Conclusions Root anatomical traits are important tools for the selection of crops with enhanced exploitation of deep soil water. The development and breeding of perennial crops for improved subsoil exploitation will be aided by greater understanding of root phenotypes linked to deep root growth and activity.
Here the impacts of feed modulation (frequency, amplitude) and catalyst design (composition and architecture) parameters are reported for the conversion of methane and NO x over a dual-layer Pt+Pd/Al 2 O 3 + Mn 0.5 Fe 2.5 O 4 /Al 2 O 3 monolith. CH 4 and NO x conversion data show that the dual-layer catalyst outperforms single-layer samples having the same catalyst loadings, with and without spinel. Close proximity of the PGM and MFO functions in the mixed-layer catalyst lowers the CH 4 conversion at high temperature while separating the PGM and spinel layers with an intermediate Al 2 O 3 layer does not. Methane conversion enhancement is linked to its nonmonotonic dependence on O 2 . The performance gains are tied to a transient activity spike that occurs during the lean-to-rich feed transition when water is present in the feed. The transient spike is attributed to the removal of CO and H 2 products via reactions with stored O 2 in the spinel, eliminating inhibition of methane steam reforming.
Group IV GeSn quantum material finds application in electronics and silicon-compatible photonics. Synthesizing these materials with low defect density and high carrier lifetime is a potential challenge due to lattice mismatch induced defects and tin segregation at higher growth temperature. Recent advancements in the growth of these GeSn materials on Si, Ge, GaAs, and with substrate orientations, demonstrated different properties using epitaxial and chemical deposition methods. This article addresses the effect of GaAs substrate orientation and misorientation on the materials’ properties and carrier lifetimes in epitaxial Ge 0.94 Sn 0.06 layers. With starting GaAs substrates of (100)/2°, (100)/6°, (110) and (111)A orientations, Ge 0.94 Sn 0.06 epitaxial layers were grown with an intermediate Ge buffer layer by molecular beam epitaxy and analyzed by several analytical tools. X-ray analysis displayed good crystalline quality, and Raman spectroscopy measurements showed blue shifts in phonon wavenumber due to biaxial compressive strain in Ge 0.94 Sn 0.06 epilayers. Cross-sectional transmission electron microscopy analysis confirmed the defect-free heterointerface of Ge 0.94 Sn 0.06 /Ge/GaAs heterostructure. Minority carrier lifetimes of the unintentionally doped n-type Ge 0.94 Sn 0.06 epilayers displayed photoconductive carrier lifetimes of >400 ns on (100)/6°, 319 ns on (100)/2°, and 434 ns on (110) GaAs substrate at 1500 nm excitation wavelength. On the other hand, Ge 0.94 Sn 0.06 layer showed poor carrier lifetime on (111)A GaAs substrate. The observed differences in carrier lifetimes were correlated with the formation energy of the Ge on (100)/6° and (100)/2° GaAs heterointerface using Stillinger–Weber interatomic potential model-based atomistic simulation with different heterointerfacial bonding by Synopsys QuantumATK tool. Total energy computation of 6280-atom Ge/GaAs supercell on (100)/6° leads to lower formation energy than (100)/2°, making it more thermodynamically stable. Hence, the growth of the GeSn/III–V material system using misoriented (100) substrates that are more thermodynamically stable will enhance the performances of optoelectronic devices.
Here, the Richtmyer–Meshkov instability causes perturbations to grow after a shock traverses a fluid density interface. This increases the mixing rate between fluid from either side of the interface. We use the Flash Eulerian hydrodynamic code to investigate alterations when a thin third layer of intermediate density is placed along the interface, effectively creating two adjacent unstable interfaces. This is a common occurrence in engineering applications where a thin barrier initially separates two materials. We find that the width of the mixing layer is similar or slightly reduced; however, the total mass of mixed material can actually increase. The mixing layer becomes more compact and efficient. However, the normalized mixed mass decreases, meaning that finger entrainment becomes more important than in the simple two-layer case. The effect of adding the central layer appears to decrease when the Atwood number is decreased. The Flash results are also benchmarked against two-layer experimental data from a shock tube at the University of Arizona.
Layered perovskites─including the Dion–Jacobson, Ruddlesden–Popper, and Aurivillius families─exhibit a wide range of correlated electron phenomena, from high-temperature superconductivity to multiferroicity. Here, in this study, we report a new family of layered perovskites realized through topochemical oxidation of La n+1 Ni n O 3n+1+δ (n = 1–4) Ruddlesden–Popper nickelate thin films. Postgrowth ozone annealing induces a substantial c-axis expansion─17.8% for La 2 NiO 4+δ (n = 1)─that monotonically decreases with increasing n. Surface synchrotron X-ray diffraction and coherent Bragg rod analysis (COBRA) reveal that this structural expansion arises from the intercalation of approximately δ ≈ 0.7–1.0 oxygen atoms into interstitial sites within the rock salt spacer layers, far exceeding the previous record of δ ≈ 0.3 for any Ruddlesden–Popper oxide. These oxygen-intercalated phases form a new class of layered perovskites with a spacer layer composition intermediate between the Ruddlesden–Popper and Aurivillius phases. Furthermore, oxygen intercalation induces metallicity, enhances nickel–oxygen hybridization, and suppresses oxygen octahedral rotations, a feature associated with high-temperature superconductivity in Ruddlesden–Popper nickelates. Our work establishes topochemical oxidation as a powerful approach to accessing highly oxidized, metastable phases across a broad range of layered oxide systems, offering new platforms to engineer electronic properties via intercalation chemistry.
Refractory multiple-principal-element alloys (RMPEAs) are promising structural materials to enable increased power efficiency in high-temperature oxidation environments, but the oxidation behavior and microstructures of the oxides, especially at the beginning of the oxidation, have received limited attention. Here, the oxidation mechanism in an equimolar W-Mo-Ta-Nb-V was investigated at 1300 °C and compared with the equimolar W-Mo-Ta-Nb alloy without V. The oxide scale on WMoTaNbV after 1 min exposure is shown to be composed of a degradation layer at the interface of the alloy/oxide, an initial oxide transition layer, followed by the main phase aggregate oxide layer, and an outermost oxide layer. At the early stage of oxidation, the absorption of oxygen by the RMPEA substrate forms a solid solution. Vanadium accelerates the initial degradation process as it forms VO. The initial oxidation-induced degradation of RMPEA follows a sequence governed by the free energy change accompanied by local element segregation. Liquid V-Mo oxides aggregate in the intermediate oxide layer. The inward growth of the oxide scale is controlled by the local composition changes, the orientation of the substrate, the crystal structure, and physical properties such as melting points of the oxides.
We present a study directly measuring the electron-beam-induced plasticity of amorphous Al 2 O 3 coatings. Core–shell nanostructures are employed as small-scale model systems for two-dimensional coatings made by atomic layer deposition (ALD). Copper nanowires (NWs) are used as substrates for ALD deposition, representing a model system for interconnects commonly found in integrated circuits. Experiments are performed in situ in a transmission electron microscope (TEM) and further analyzed with electron energy loss spectroscopy (EELS). Our in situ TEM tensile experiments reveal the highly plastic behavior of the ALD shell, which withstands a maximum strain of 188%. Comparable samples under beam-off conditions show a brittle fracture, which underlines the effect of electron irradiation. The electron-beam-activated bond switching within the amorphous network enables compensation of the applied tensile strain, leading to viscous flow. By incorporating an intermediate nanocrystalline layer within the Al 2 O 3 shell, the plasticity is suppressed and brittle fracture occurs. This work directly demonstrates the tuning of mechanical properties in amorphous ALD structures through electron irradiation.
Abstract Hydraulic redistribution is the transport of water from wet to dry soil layers, upward or downward, through plant roots. Often in savanna and woodland ecosystems, deep‐rooted trees, and shallow‐rooted grasses coexist. The degree to which these different species compete for or share soil‐water derived from precipitation or groundwater, as well as how these interactions are altered by hydraulic redistribution, is unknown. We use a multilayer canopy model and field observations to examine how the presence of deep, but tree‐root accessible, groundwater impacts seasonal patterns of hydraulic redistribution, and interaction between coexisting vegetation species in a semiarid riparian woodland (US‐CMW). Based on the simulation, trees absorb moisture at the water table (∼10 m depth) and release it in the shallow soil depth (0–3 m) during the dry pre‐monsoon season. We observed the occurrence of a new convergent hydraulic redistribution pattern during the monsoon season, where moisture is transported from both the near‐surface (0–0.5 m) and the water table to intermediate soil layers (1–5 m) through tree roots. We found that hydraulic redistribution demonstrates a growth facilitation effect at this site, supporting 49% of growing season tree transpiration and 14% of the grass transpiration. Compared to a similarly structured upland savanna without accessible groundwater, the riparian site shows an increased amount of hydraulically redistributed water and more facilitative water use between coexisting grasses and trees. These results shed light on the linkage between accessible groundwater and the role of hydraulic redistribution on the interaction between deep‐rooted and shallow‐rooted vegetation.
To help ease ports to forthcoming Department of Energy (DOE) exascale systems, testbeds have been made available to select users. These testbeds are helpful for preparing codes to run on the same hardware and similar software as in their respective exascale systems. This paper describes how the Uintah Computational Framework, an open-source asynchronous many-task (AMT) runtime system, has been modified to be performance portable across the DOE Crusher, DOE Polaris, and DOE Sunspot testbeds in preparation for portable simulations across the exascale DOE Frontier and DOE Aurora systems. The Crusher, Polaris, and Sunspot testbeds feature the AMD MI250X, NVIDIA A100, and Intel PVC GPUs, respectively. This performance portability has been made possible by extending Uintah’s intermediate portability layer [18] to additionally support the Kokkos::HIP, Kokkos::OpenMPTarget, and Kokkos::SYCL back-ends. This paper also describes notable updates to Uintah’s support for Kokkos, which were required to make this extension possible. Results are shown for a challenging radiative heat transfer calculation, central to the University of Utah’s predictive boiler simulations. These results demonstrate single-source portability across AMD-, NVIDIA-, and Intel-based GPUs using various Kokkos back-ends.
The pursuit of ever-higher solar cell efficiencies has focused heavily on multijunction technologies. In tandem cells, subcells are typically either contacted via two terminals (2T) or four terminals (4T). Simulations show that the less-common three-terminal (3T) design may be comparable to 4T tandem cells in its compatibility with a range of materials, operating conditions, and methods for subcell integration, yet the 3T design circumvents shading losses of the 4T intermediate conductive layers. This study analyzes the performance of two superstrate 3T III-V-on-Si (III-V//Si) tandem cells: One has slightly greater current contribution from the Si bottom cell (GaInP//Si) and the other has substantially greater current contribution from the GaAs top cell (GaAs//Si). Our results show that both tandem cells exhibit the same efficiency (21.3%), thereby demonstrating that the third terminal allows for flexibility in the selection of the top cell material, similar to the 4T design.