Search NASA⌕ Search

SEARCH · Search NASA

Results for “modeling methodology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

A methodology for modeling the mechanical interaction between a reaction wheel and a flexible structure

This paper presents a modeling methodology used to predict the performance of a flexible structure, such as a space telescope, in the presence of an on-board vibrational disturbance source, such as a reaction wheel assembly (RWA). Both decoupled and coupled analysis methods are presented. The decoupled method relies on blocked RWA disturbances, measured with the RWA hardmounted to a rigid surface. The coupled method corrects the blocked RWA disturbance boundary conditions using "force filters," which depend on estimates of the interface accelerances of the RWA and space-craft. Both methods were validated on the Micro-Precision Interferometer testbed at the Jet Propulsion Laboratory. Experimental results are encouraging, indicating that both methods provide sufficient accuracy compared to measured values; however, the coupled method provides the best results when the gyroscopic nature of the spinning RWA is captured in the RWA accelerance model. Additionally, the RWA disturbance cross spectral density terms are found to be influential.

vibration↗
NASA NTRS1988

Evaluation of a methodology for model identification in the time domain

A model identification methodology for structural dynamics has been applied to simulated vibrational data as a first step in evaluating its accuracy. The evaluation has taken into account a wide variety of factors which affect the accuracy of the procedure. The effects of each of these factors were observed in both the response time histories and the estimates of the parameters of the model by comparing them with the exact values of the system. Each factor was varied independently but combinations of these have also been considered in an effort to simulate real situations. The results of the tests have shown that for the chain model, the procedure yields robust estimates of the stiffness parameters under the conditions studied whenever uniqueness is ensured. When inaccuracies occur in the results, they are intimately related to non-uniqueness conditions inherent in the inverse problem and not to shortcomings in the methodology.

Beck, R. T.↗
NASA NTRS2011

Methodology for Developing a Probabilistic Risk Assessment Model of Spacecraft Rendezvous and Dockings

In 2007 NASA was preparing to send two new visiting vehicles carrying logistics and propellant to the International Space Station (ISS). These new vehicles were the European Space Agency s (ESA) Automated Transfer Vehicle (ATV), the Jules Verne, and the Japanese Aerospace and Explorations Agency s (JAXA) H-II Transfer Vehicle (HTV). The ISS Program wanted to quantify the increased risk to the ISS from these visiting vehicles. At the time, only the Shuttle, the Soyuz, and the Progress vehicles rendezvoused and docked to the ISS. The increased risk to the ISS was from an increase in vehicle traffic, thereby, increasing the potential catastrophic collision during the rendezvous and the docking or berthing of the spacecraft to the ISS. A universal method of evaluating the risk of rendezvous and docking or berthing was created by the ISS s Risk Team to accommodate the increasing number of rendezvous and docking or berthing operations due to the increasing number of different spacecraft, as well as the future arrival of commercial spacecraft. Before the first docking attempt of ESA's ATV and JAXA's HTV to the ISS, a probabilistic risk model was developed to quantitatively calculate the risk of collision of each spacecraft with the ISS. The 5 rendezvous and docking risk models (Soyuz, Progress, Shuttle, ATV, and HTV) have been used to build and refine the modeling methodology for rendezvous and docking of spacecrafts. This risk modeling methodology will be NASA s basis for evaluating the addition of future ISS visiting spacecrafts hazards, including SpaceX s Dragon, Orbital Science s Cygnus, and NASA s own Orion spacecraft. This paper will describe the methodology used for developing a visiting vehicle risk model.

Farnham, Steven J., II↗
NASA NTRS1998

A Measurement and Simulation Based Methodology for Cache Performance Modeling and Tuning

We present a cache performance modeling methodology that facilitates the tuning of uniprocessor cache performance for applications executing on shared memory multiprocessors by accurately predicting the effects of source code level modifications. Measurements on a single processor are initially used for identifying parts of code where cache utilization improvements may significantly impact the overall performance. Cache simulation based on trace-driven techniques can be carried out without gathering detailed address traces. Minimal runtime information for modeling cache performance of a selected code block includes: base virtual addresses of arrays, virtual addresses of variables, and loop bounds for that code block. Rest of the information is obtained from the source code. We show that the cache performance predictions are as reliable as those obtained through trace-driven simulations. This technique is particularly helpful to the exploration of various "what-if' scenarios regarding the cache performance impact for alternative code structures. We explain and validate this methodology using a simple matrix-matrix multiplication program. We then apply this methodology to predict and tune the cache performance of two realistic scientific applications taken from the Computational Fluid Dynamics (CFD) domain.

Waheed, Abdul↗
NASA NTRS1992

A cislunar guidance methodology and model for low thrust trajectory generation

A guidance methodology for generating low-thrust cislunar trajectories was developed and incorporated in a computer model. The guidance methodology divides the cislunar transfer into three phases. Each phase is discussed in turn. To establish the effectiveness of the methodology and algorithms the computer model generated three example cases for the cislunar transfer of a low-thrust electric orbital transfer vehicle (EOTV). Transfers from both earth orbit to lunar orbit and from lunar orbit back to earth orbit are considered. The model allows the determination of the low-thrust EOTV's time-of-flight, propellant mass, payload mass, and thrusting history.

Korsmeyer, David J.↗
NASA NTRS1992

A component modes projection and assembly model reduction methodology for articulated, multi-flexible body structures

A two-stage model reduction methodology, combining the classical Component Mode Synthesis (CMS) method and the newly developed Enhanced Projection and Assembly (EP&A) method is proposed in this research. The first stage of this methodology, called COmponent Mode Projection and Assembly model REduction (COMPARE) method, involves the generations of CMS mode sets, such as the MacNeal-Rubin mode sets. These mode sets are then used to reduce the order of each component model in the Rayleigh-Ritz sense. The resultant component models are then combined to generate reduced-order system models at various system configurations. A composite mode set which retains important system modes at all system configurations is then selected from these reduced-order system models. In the second stage, the EP&A model reduction method is employed to reduce further the order of the system model generated in the first stage. The effectiveness of the COMPARE methodology has been successfully demonstrated on a high-order, finite-element model of the cruise-configured Galileo spacecraft.

Lee, Allan Y.↗
NASA NTRS1993

A component modes projection and assembly model reduction methodology for articulated, multi-flexible body structures

A two-stage model reduction methodology, combining the classical Component Mode Synthesis (CMS) method and the newly developed Enhanced Projection and Assembly (EP&A) method, is proposed in this research. The first stage of this methodology, called the COmponent Modes Projection and Assembly model REduction (COMPARE) method, involves the generation of CMS mode sets, such as the MacNeal-Rubin mode sets. These mode sets are then used to reduce the order of each component model in the Rayleigh-Ritz sense. The resultant component models are then combined to generate reduced-order system models at various system configurations. A composite mode set which retains important system modes at all system configurations is then selected from these reduced-order system models. In the second stage, the EP&A model reduction method is employed to reduce further the order of the system model generated in the first stage. The effectiveness of the COMPARE methodology has been successfully demonstrated on a high-order, finite-element model of the cruise-configured Galileo spacecraft.

Lee, Allan Y.↗
DOE OSTI2026

User’s Manual for RESRAD-RDD&IND Code Version 2: Vol. 1—Methodology and Models Used in RESRAD-RDD&IND Code

RESRAD-RDD&IND is part of the RESRAD family of codes that Argonne National Laboratory developed for the U.S. Department of Energy (DOE). An earlier version, RESRAD-RDD published in 2009, dealt only with radiological dispersal device (RDD) incidents (DOE 2009). This new version, RESRAD-RDD&IND, is designed to evaluate both RDD incidents and improvised nuclear device (IND) incidents. This report is Volume 1 of the RESRAD-RDD&IND User’s Manual that documents the methodology, models, and radionuclide-specific data used in RESRAD-RDD&IND code Version 2.0. Volume 2 of the RESRAD-RDD&IND User’s Manual is called the User’s Guide for RESRAD-RDD&IND Code . It describes how to use RESRAD-RDD&IND code Version 2.0 and includes screen shots and parameter information.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

LA17-V-InverseRadTransportProblem-PD2Kb. Final Project Report

In the inverse radiation transport problem, a radiation signal emanating from an unknown object is used to reconstruct geometric and material parameters of the object , e.g., the mass of special nuclear material (SNM), the isotopic composition of the SNM (e.g., the enrichment of 235U), the thickness of shielding, etc. The inverse radiation transport problem is one of the most fundamental and important in the emergency response mission, and has been addressed in previous NA-22 and NA-42/84 investments by using derivative-free optimization methods. Our project was aimed at (i) consolidating previous work by applying polynomial chaos expansion (PCE) for reducing significantly the number of forward model simulations required by derivative-free optimization methods; (ii) developing a general-purpose framework and stand-alone software for solving the inverse radiation transport problem by applying a new “predictive modeling” methodology (predictive modeling of coupled multi-physics systems, PM_CMPS) which enables the fusing of experimental and computational information; and (iii) developing several benchmarks (for unscattered gamma rays) for demonstrating the quantification of non-Gaussian features (e.g., skewness and kurtosis, which characterize asymmetries and long tails) of response distributions by deterministically and efficiently propagating parameter uncertainties (covariances and higher-order moments, where available) using high-order sensitivities computed by the recently developed comprehensive adjoint sensitivity analysis methodology (C-ASAM). With regard to (i), application of PCE, the most significant accomplishment of this project was an implementation of PCE into INVERSE that significantly reduced computation time for the DiffeRential Evolution Adaptive Metropolis (DREAM) and Differential Evolution (DE) methods. For inverse transport problems with measurements of neutron leakage, neutron multiplication, and neutron-induced gamma-rays, the solution times for the DREAM and DE methods were reduced by factors of 30-300, reducing run times from hours to minutes while maintaining the same accuracy as the standard (non-PCE) DREAM and DE. Speedups were further improved by exploring sparse grid quadrature sets using the Toolkit for Adaptive Stochastic Modeling and Non-Intrusive ApproximatioN (Tasmanian) toolset. An initial exploration of sparse grids indicated that further speedups factors of 5-10 are obtainable. The implementation of PCE in INVERSE is not in a form that users can easily access. With regard to (ii), solving the inverse problem using a predictive modeling paradigm, the most significant accomplishment of this project were the derivation and implementation of adjoint-based second derivatives in neutron and photon transport theory. There are two codes that compute these derivatives. SENSPG computes them for uncollided gamma rays and SENSMG computes them for neutron leakage. SENSMG is open-source code available on github. Other significant accomplishments included a stand-alone code, MULTI-PRED, that implements the predictive modeling paradigm, along with a detailed manual. The code was implemented in the existing INVERSE code for inverse problems, but a head-to-head comparison of inverse methods was not achieved. We also derived and implemented the capability to compute sensitivities for multiplicity measurements into the SENSMG code, and this capability was used in a data assimilation application, but it was not used for solving inverse problems. With regard to (iii), developing benchmarks to demonstrate the importance of high-order sensitivity and uncertainty analysis, the most significant accomplishment of this project were two test problems that showed how important second-order sensitivities are.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS1993

A COMPACT model reduction methodology for articulated, multi-flexible bodies structures

To simulate the dynamical motion of articulated, multiflexible body structures, one can use multibody simulation packages such as DISCOS. To this end, one need appropriate reduced-order models for all the flexible components involved. The component modes projection and assembly model reduction methodology is one way to construct these reduced-order component models. However, the generated reduced-order system models typically contain high frequency extraneous modes. The presence of high frequency extraneous modes in a reduced-order system model forces us to use a small stepsize in the numerical integration of that model, resulting in an increase in the elapsed time of the integration process. To eliminate these high-frequency modes, we first identify and discard the component modes that 'contributed' to the generations of these modes. A sensitivity analysis is then used to determine how the remaining component modes should be perturbed in order to still closely capture the selected system modes. The effectiveness of the proposed methodology has been successfully verified using a finite-element model of the Galileo spacecraft.

Lee, Allan Y.↗
NASA NTRS2001

Space Transportation Operations: Assessment of Methodologies and Models

The systems design process for future space transportation involves understanding multiple variables and their effect on lifecycle metrics. Variables such as technology readiness or potential environmental impact are qualitative, while variables such as reliability, operations costs or flight rates are quantitative. In deciding what new design concepts to fund, NASA needs a methodology that would assess the sum total of all relevant qualitative and quantitative lifecycle metrics resulting from each proposed concept. The objective of this research was to review the state of operations assessment methodologies and models used to evaluate proposed space transportation systems and to develop recommendations for improving them. It was found that, compared to the models available from other sources, the operations assessment methodology recently developed at Kennedy Space Center has the potential to produce a decision support tool that will serve as the industry standard. Towards that goal, a number of areas of improvement in the Kennedy Space Center's methodology are identified.

Joglekar, Prafulla↗
NASA NTRS2002

Space Transportation Operations: Assessment of Methodologies and Models

The systems design process for future space transportation involves understanding multiple variables and their effect on lifecycle metrics. Variables such as technology readiness or potential environmental impact are qualitative, while variables such as reliability, operations costs or flight rates are quantitative. In deciding what new design concepts to fund, NASA needs a methodology that would assess the sum total of all relevant qualitative and quantitative lifecycle metrics resulting from each proposed concept. The objective of this research was to review the state of operations assessment methodologies and models used to evaluate proposed space transportation systems and to develop recommendations for improving them. It was found that, compared to the models available from other sources, the operations assessment methodology recently developed at Kennedy Space Center has the potential to produce a decision support tool that will serve as the industry standard. Towards that goal, a number of areas of improvement in the Kennedy Space Center's methodology are identified.

Joglekar, Prafulla↗
NASA NTRS2010

Sorbent, Sublimation, and Icing Modeling Methods: Experimental Validation and Application to an Integrated MTSA Subassembly Thermal Model

This paper details the validation of modeling methods for the three core components of a Metabolic heat regenerated Temperature Swing Adsorption (MTSA) subassembly, developed for use in a Portable Life Support System (PLSS). The first core component in the subassembly is a sorbent bed, used to capture and reject metabolically produced carbon dioxide (CO2). The sorbent bed performance can be augmented with a temperature swing driven by a liquid CO2 (LCO2) sublimation heat exchanger (SHX) for cooling the sorbent bed, and a condensing, icing heat exchanger (CIHX) for warming the sorbent bed. As part of the overall MTSA effort, scaled design validation test articles for each of these three components have been independently tested in laboratory conditions. Previously described modeling methodologies developed for implementation in Thermal Desktop and SINDA/FLUINT are reviewed and updated, their application in test article models outlined, and the results of those model correlations relayed. Assessment of the applicability of each modeling methodology to the challenge of simulating the response of the test articles and their extensibility to a full scale integrated subassembly model is given. The independent verified and validated modeling methods are applied to the development of a MTSA subassembly prototype model and predictions of the subassembly performance are given. These models and modeling methodologies capture simulation of several challenging and novel physical phenomena in the Thermal Desktop and SINDA/FLUINT software suite. Novel methodologies include CO2 adsorption front tracking and associated thermal response in the sorbent bed, heat transfer associated with sublimation of entrained solid CO2 in the SHX, and water mass transfer in the form of ice as low as 210 K in the CIHX.

Bower, Chad↗
DOE OSTI2024

An improved methodology for modeling short pulse buried layer x-ray emission spectra

Radiation-hydrodynamic and spectroscopic modeling are important aspects of high energy density experimental design. In this paper, we improve the performance and capabilities over those obtainable with a previous methodology used for simulating x-ray emission spectra from buried layer targets heated by short pulse lasers. The improvement incorporates post-processing HYDRA radiation-hydrodynamic output with a non-local thermodynamic equilibrium atomic-kinetics radiation transport code, Cretin. Each code uses an independent radiation field which allows decoupling HYDRA's radiation group structure from Cretin's spectral output to improve the speed and flexibility of the design methodology. The execution time decreases from 2–3 days to a few hours while the flexibility of the improved methodology allows for performing sensitivity studies including a comparison of steady-state and time-dependent atomic kinetics and differences in the radiation group structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

GoldSim E-Area Low-Level Waste Facility Aquifer Zone Model Calibration Methodology

This report documents the development and calibration of the E-Area Low-Level Waste Facility (ELLWF) Gold Sim aquifer model. It provides a methodology on how a Gold Sim aquifer model can be calibrated to specific PORFLOW-based aquifer predictions. The calibration activity presented within this report focuses on the Slit Trench #06 (ST06) location that resides within the center set of Slit Trenches. This Gold Sim-based aquifer model is a generic model capable of being calibrated to any of the other trench locations within E-Area. In addition, subsequent activities (beyond the scope of this effort) will couple this GoldSim-based aquifer model to various GoldSim-based trench models, with the intent of performing stochastic analyses that couple all pertinent fate and transport processes from the ground surface up to the 100-m point of assessment (POA).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1994

A PDE-based methodology for modeling, parameter estimation and feedback control in structural and structural acoustic systems

A problem of continued interest concerns the control of vibrations in a flexible structure and the related problem of reducing structure-borne noise in structural acoustic systems. In both cases, piezoceramic patches bonded to the structures have been successfully used as control actuators. Through the application of a controlling voltage, the patches can be used to reduce structural vibrations which in turn lead to methods for reducing structure-borne noise. A PDE-based methodology for modeling, estimating physical parameters, and implementing a feedback control scheme for problems of this type is discussed. While the illustrating example is a circular plate, the methodology is sufficiently general so as to be applicable in a variety of structural and structural acoustic systems.

Banks, H. T.↗