Search NASA⌕ Search

SEARCH · Search NASA

Results for “point source capture analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Techno-Economic Evaluation of Strategies to Approach Net-Zero Carbon Sustainable Aviation Fuel via Woody Biomass Gasification and Fischer-Tropsch Synthesis

Reducing the carbon dioxide (CO2) emissions from the transportation industry is a key target for achieving global net-zero carbon goals. Wide-spread electrification, efficient engine design, and alternative fuel implementations have been introduced for light-duty vehicles and are projected to significantly reduce light-duty emissions in the near future. Conversely, the aviation sector contributes considerably towards transportation-based carbon emissions, but current projections do not show substantial reductions in carbon emissions over time. Challenges for the aviation sector include low compatibility with electrification, relative inflexibility to variations in fuel properties, and requirement of high energy density fuels. Thus, identifying pathways to decarbonize the aviation sector via liquid low- or net-zero carbon biofuels that are compatible with current aviation infrastructure is crucial. This work investigates the economic feasibility of approaching net-zero carbon sustainable aviation fuel (SAF) from woody biomass via gasification and Fischer-Tropsch synthesis. In doing so, this assessment identifies the economic opportunities and trade-offs of several carbon mitigation strategies coupled with renewable resource interventions required to approach net-zero carbon fuels via biomass. Renewable natural gas and green hydrogen utilization strategies are assessed to examine the impact of fuel yield improvements versus renewable resource cost. Additionally, both carbon capture and sequestration (CCS) and carbon capture and utilization (CCU) are considered in this analysis to help mitigate carbon loss to the atmosphere. Each scenario was assessed on cost, carbon efficiency, energy efficiency, and overall technology-readiness level (TRL). The results of this analysis show that renewable natural gas, green hydrogen, and CCS can be viewed as a low-cost, near-term carbon abatement strategies. However, in the long-term, deployment of more expensive and less technologically mature CCU technologies can make use of point sources of CO2 to boost overall fuel production.

aviation fuel↗
DOE OSTI2021

Numerical Modelling of a Two-Body Point Absorber Featuring Variable Geometry

This work presents a novel wave energy converter (WEC) device concept that incorporates variable geometry modules into a two-body point absorber type WEC. The variable geometry modules consist of air inflatable bags in the surface float and a water inflatable ring in the reaction body. The variable geometry floats are able to provide greater control over the device hydrodynamics; they can be inflated or deflated to emphasize either power absorption or load shedding. The device geometry is controlled in a quasi-static fashion, while the power take-off (PTO) unit is controlled on a wave-to-wave timescale. The surface float is tethered directly to the submerged reaction body through PTO tether lines. A linear time-domain analysis, conducted using open-source Wave Energy Converter (WEC-Sim) software, was used to estimate the absorbed power of the WEC in sea states defined by the Wave Energy Prize. WEC power performance was weighted against the expected capital cost of building the load bearing structure of the device, providing an estimated ACE value. The inclusion of the variable geometry modules was shown to be effective in altering the device geometry to improve power capture with a near proportional increase in expected costs, providing a nearly constant power-to-cost ratio.

cost of energy↗
DOE OSTI2022

Netostat: analyzing dynamic flow patterns in high-speed networks

Understanding flow traffic patterns in networks, such as the Internet or service provider networks, is crucial to improving their design and building them robustly. However, as networks grow and become more complex, it is increasingly cumbersome and challenging to study how the many flow patterns, sizes and the continually changing source-destination pairs in the network evolve with time. Here, we present Netostat, a visualization-based network analysis tool that uses visual representation and a mathematics framework to study and capture flow patterns, using graph theoretical methods such as clustering, similarity and difference measures. Netostat generates an interactive graph of all traffic patterns in the network, to isolate key elements that can provide insights for traffic engineering. We present results for U.S. and European research networks, ESnet and GEANT, demonstrating network state changes, to identify major flow trends, potential points of failure, and bottlenecks.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Along-Trajectory Acoustic Signal Variations Observed During the Hypersonic Re-Entry of the OSIRIS-REx Sample Return Capsule

The re-entry of the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) sample return capsule (SRC) on 24 September 2023 presented a rare opportunity to study atmospheric entry dynamics through a dense network of ground-based infrasound sensors. As the first interplanetary capsule to re-enter over the United States since Stardust in 2006, this event allowed for unprecedented observations of infrasound signals generated during hypersonic descent. We deployed 39 single-sensor stations across Nevada and Utah, strategically distributed to capture signals from distinct trajectory points. Infrasound data were analyzed to examine how signal amplitude and period vary with altitude and propagation path for a nonablating hypersonic object with well-defined physical and aerodynamic properties. Raytracing simulations incorporated atmospheric specifications from the ground-2-space model to estimate source altitudes for observed signals. Results confirmed ballistic arrivals at all stations, with source altitudes ranging from 44 to 62 km along the trajectory. Signal period and amplitude exhibited strong dependence on source altitude, with higher altitudes corresponding to lower amplitudes, longer periods, and reduced high-frequency content. Regression analysis demonstrated strong correlations between signal characteristics and both altitude and propagation geometry. Our results suggest, when attenuation is considered, the amplitude is primarily determined by the source, with the propagation path playing a secondary role over the distances examined. These findings emphasize the utility of controlled SRC re-entries for advancing our understanding of natural meteoroid dynamics, refining atmospheric entry models, and improving methodologies for planetary defense. The OSIRIS-REx SRC campaign represents the most comprehensive infrasound study of a hypersonic re-entry to date, showcasing the potential of coordinated geophysical observational networks for high-energy atmospheric phenomena, including space debris re-entries.

58 GEOSCIENCES↗
DOE OSTI2020

Development of a Conditioned System-Level Groundwater Model to Evaluate Long-Term Groundwater Impacts within a Performance Assessment - 20115

A preliminary performance assessment (PA) of single-shell tank Waste Management Area (WMA) A-AX located at the U.S. Department of Energy (DOE)'s Hanford Site in southeastern Washington is being conducted to satisfy the requirements of DOE Order 435.1 [1] as it relates to closure of the single-shell radioactive waste tanks in the WMA A-AX tank farms. A PA assesses the fate, transport, and impacts of radionuclides within a low-level radioactive waste disposal facility in its assumed closure configuration and the subsequent potential doses to humans over a 1,000-year compliance period and a 10,000-year performance evaluation period. The WMA A-AX preliminary PA evaluation is structured around the complementary use of process-level and system-level models to calculate the facility performance against established DOE Order 435.1 [1] performance objectives. Process-level models are those that represent a detailed phenomenological representation of processes of concern in the PA. Process models typically only represent one or a few of the components of the PA, such as groundwater flow and transport, and must be integrated with other modeling elements to perform PA calculations. System-level models are those that are abstracted from the process models, retaining the essential features of the process model, while allowing integration of all aspects of the PA in a single modeling framework. System-level models are often characterized by coarser numerical discretization, lower dimensionality, or other similar simplifications compared to the process-level model. Traditionally, a three-dimensional (3-D) process-level model is utilized primarily to evaluate the long-term impact on groundwater and the potential doses to individuals who consume contaminated groundwater. System-level models are also utilized to evaluate the groundwater pathway in PAs. These models typically have reduced dimensionality (1-D) and are conditioned utilizing flow fields (Darcy fluxes) and moisture content distributions that are abstracted from the process level models. The abstraction approach assures that the flow field in both models is consistent for a specific set of input parameters for flow, differing only in the discretization and dimensionality of the two models. The preliminary WMA A-AX PA incorporates a detailed representation of the geological system and hydraulic properties within the 3-D model STOMP{sup C} numerical code so that the effects of relevant features and processes on water flow and radionuclide transport in the subsurface can be evaluated. The complementary system-level model is developed utilizing the GoldSim{sup C} code to implement a simplified, 1-D equivalent model to represent the groundwater pathway. Contaminant transport through the vadose zone and unconfined aquifer for Tc-99 and I-129 were evaluated in each of the models. Adjustments to the saturated portion of the GoldSim{sup C} 1-D model were required to mimic the dispersion effect captured with the 3-D STOMP{sup C} model. Once this conditioning was conducted, highly similar results for the transport of Tc-99 and I-129 were achieved at the point of calculation, located 100 m downgradient from the WMA A-AX fenceline. These radionuclides represent elements that are regarded as primary dose drivers in the PA groundwater pathway analysis. The high degree of conformance between the two models suggests that the use of the equivalent 1-D system model is suitable for evaluating the full suite of radionuclides that will be released from the tank sources within WMA A-AX over the 1,000-year compliance period and over the 10,000-year evaluation period. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Machine Learning for Automated Extraction of Building Geometry

As data science comes to buildings, the promise of using machine learning and novel sources of data has received much attention. Advances in machine learning and computer vision algorithms, combined with increased access to unstructured data (e.g., images and text), have created an opportunity for automated extraction of building characteristics – cost-effectively, and at scale. Acquisition of features such as footprint are time consuming and costly to acquire with today’s manual methods, but can be streamlined through intelligent software-based solutions applied to satellite images. When combined with aerial RGB and thermal images, full 3D geometries and thermal maps can be constructed to determine additional characteristics such as window to wall ratio, height, number of stories and envelope thermal characteristics. In this paper we present three contributions to accelerate these high potential opportunities: (1) a methodical analysis of how these features can be integrated into today’s simulation and data driven software tools to enhance efficiency measure identification and owner/operator decision making; (2) development and accuracy testing of open source deep neural network methods to extract building footprints from satellite imagery, including the curation and application of openly available GIS datasets for training and continued development by others; and (3) an open framework for drone-based image capture and creation of 3D building geometries. This work represents an important bridge between high-level studies that span diverse application areas and those that detail point solutions yet cannot be easily replicated or extended.

Touzani, Samir↗
DOE OSTI2025

Transformational Sorbent-Based Process for a Substantial Reduction in the Cost of CO 2 Capture

InnoSepra’s project, “Transformational Sorbent-Based Process for a Substantial Reduction in the Cost of CO 2 Capture,” utilized computational tools, materials characterization, and lab and pilot-scale testing to optimize previously identified materials to determine their performance under post-combustion capture conditions. InnoSepra utilized the test results to determine the energy required for regeneration and to develop a process design/analysis to demonstrate the application of developed materials for post-combustion capture. A techno-economic analysis was performed to fully assess the potential of the materials for post-combustion capture. InnoSepra also updated the State Point Data Table and completed the environmental, health, and safety (EH&S) Risk Assessment. The InnoSepra CO 2 capture technology has the potential for a significant reduction in the CO 2 capture cost for the power plant and industrial flue gases.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS2022

Supporting Hazard Analysis for Wildfire Response Using fmdtools and MIKA

The System Wide Safety (SWS) Safety Demonstrator (SD) Series drives development of an increasingly capable In-Time Aviation Safety Management System (IASMS) focusing on humanitarian applications, starting with wildfire response (SD-1). The goals of this report are to (1) provide an early hazard analysis and mitigation evaluation of wildfire response to support these efforts and (2) provide a demonstration of capabilities of the Fault Model Design Tools (fmdtools) and Manager for Intelligent Knowledge Access (MIKA) tools. fmdtools provides a modeling, simulation, and resiliency analysis framework in which a wildfire response model, the System Modeling and Analysis of Resiliency in Scalable Traffic Management for Emergency Response Operations (SMARt-STEReO), is built. MIKA is an intelligent knowledge manager with several capabilities, including assisting in hazard analysis by extracting and analyzing hazards from historical incident reports. The following topics are covered in the report: Understanding Wildfire Hazard Dynamics. We provide a description and simulated examples of how hazards occur in the SMARt-STEReO model of wildfire response and their effect on its outcome. This provides a common mental model and focuses the analysis presented in the remainder of the report. Wildfire Hazard Identification. MIKA identifies wildfire hazards from three relevant datasets: the ICS-209-PLUS, SAFECOM, and SAFENET. Hazards are manually organized into a taxonomy and MIKA analyzes each hazard’s effects, likelihood, severity, and risk. Evaluating Mitigation Strategies. The SMARt-STEReO wildfire response model built in fmdtools evaluates a subset of identified hazards. Specifically, we simulate the effect of communications faults and equipment faults on operator safety, the effect of changing winds and flammability, and a scenario with multiple ignition points and heavy smoke. Tool Limitations and Usage Considerations. We provide a discussion of appropriate tool use cases as well as limitations and considerations for usage. The tool findings are used to synthesize recommendations for wildfire response operations, which can be captured as part of an IASMS. Key recommendations are as follows: Hazards are identified from a broad spectrum of sources including aircraft subsystems, operational sources, and ground crew operations. Highest risk operational environment hazards identified are Evacuations. The highest risk manned aerial operations hazard categorized is Jumper Operations Mishap. Ground crew hazards that are highest risk are Burns, Cargo Operations Overhead, Dehydration, Entrapment, Falling Objects, Heart Attacks, Heat Exhaustion, Inadequate Training or Certification, Vehicle Breakdown, and Vehicle Collision. Modelled containment failures arise from a mismatch between the difficulty of the firefighting scenario and the capacity (e.g., speed, effectiveness, awareness) of the response. In firefighting scenarios where containment is possible (e.g., because the fire does not spread too quickly), these mismatches can occur because of a change in environmental conditions (e.g., wind, flammability, etc) or because of planning, equipment, or communications faults. Improvements to communications increase the capacity of the firefighting response by reducing the time needed to respond to the fire. While surveillance does not increase this capacity by itself, it increases operator safety by increasing state awareness, enabling firefighters to evade approaching fires. Increasing both has a synergistic effect. In general, these performance and resilience increases generalize over fault scenarios as well as unforeseen changes to circumstances (i.e., wind, aridity, etc.). However, these improvements need to be designed so as not to make the system prone to persistent large-scale communications outages, which can reduce performance.

Hazard analysis↗
NASA NTRS2003

Control Modes of the ST7 Disturbance Reduction System Flight Validation Experiment

The Space Technology 7 experiment will perform an on-orbit system-level validation of two specific Disturbance Reduction System technologies: a gravitational reference sensor employing a free-floating test mass and a set of micro-Newton colloidal thrusters. The ST7 Disturbance Reduction System is designed to maintain the spacecraft s position with respect to a free-floating test mass to less than 10 nm/the square root of Hz over the frequency range of 1 to 30 mHz. This requirement will help ensure that the residual accelerations on the test masses (beyond gravitational acceleration) will be below the ST7 goal of 300 (1 + [f/3 mHz](sup 2)) pm/s(sup 2)/the square root of Hz. This paper presents the overall design and analysis of the spacecraft drag-free and attitude controllers being designed by NASA s Goddard Space Flight Center. These controllers close the loop between the GRS and the micro-Newton colloidal thrusters. The ST7 DRS comprises three control systems: the attitude control system to maintain a sun-pointing attitude, the drag free control to center the spacecraft about the test masses, and the test mass suspension control. There are five control modes in the operation of the ST7-DRS, starting from the attitude-only mode and leading to the challenging science mode. The design and analysis of each of the control modes are presented. An 18-DOF model is developed to capture the essential dynamics of the ST7-DRS package. It includes all rigid-body dynamics of the spacecraft and two test masses (three translations and three rotations for the spacecraft and each of the test masses). Actuation and measurement noise and major disturbance sources acting on the spacecraft and test masses are modeled.

Maghami, P. G.↗
DOE OSTI2025

Preliminary Screening Techno-Economic Analysis of Industrial SOFC/SOEC and Reversible SOC Integration

National Energy Technology Laboratory (NETL) provides system-level process, cost, and market analyses on solid oxide cell (SOC) based technologies. Specifically, techno-economic analyses (TEA), market assessments, and other technology evaluations serve to guide the U.S. Department of Energy (DOE) Office of Fossil Energy and Carbon Management (FECM) Reversible Solid Oxide Fuel Cell (R-SOFC) Program technology goals and objectives. These studies are key to describing how the technologies contribute to improving domestic energy infrastructure in a clean, efficient manner. This effort seeks to elucidate the potential integration opportunities between reversible SOCs and industrial systems which would aid in SOC commercialization and deployment. These preliminary screening-level results show what opportunities exist for power generating SOFCs, hydrogen producing SOECs, and point-source carbon capture. Improvements can be seen through changes in cost of electricity, cost of hydrogen, and cost of carbon capture.

reversible SOC↗
NASA NTRS2012

Portable Fourier Transform Spectroscopy for Analysis of Surface Contamination and Quality Control

Progress has been made into adapting and enhancing a commercially available infrared spectrometer for the development of a handheld device for in-field measurements of the chemical composition of various samples of materials. The intent is to duplicate the functionality of a benchtop Fourier transform infrared spectrometer (FTIR) within the compactness of a handheld instrument with significantly improved spectral responsivity. Existing commercial technology, like the deuterated L-alanine triglycine sulfide detectors (DLATGS), is capable of sensitive in-field chemical analysis. This proposed approach compares several subsystem elements of the FTIR inside of the commercial, non-benchtop system to the commercial benchtop systems. These subsystem elements are the detector, the preamplifier and associated electronics of the detector, the interferometer, associated readout parameters, and cooling. This effort will examine these different detector subsystem elements to look for limitations in each. These limitations will be explored collaboratively with the commercial provider, and will be prioritized to meet the deliverable objectives. The tool design will be that of a handheld gun containing the IR filament source and associated optics. It will operate in a point-and-shoot manner, pointing the source and optics at the sample under test and capturing the reflected response of the material in the same handheld gun. Data will be captured via the gun and ported to a laptop.

Pugel, Diane↗
DOE OSTI2023

Computational modeling and validation of a modified Marple cascade impactor

Oak Ridge National Laboratory (ORNL) is investigating respirable aerosol fractions from failed high-burnup (HBU) commercial spent nuclear fuel (CSNF) rods (Montgomery et al., 2022). The work aims to characterize the source term of radioactive aerosols that could result from mechanical failure and handling of failed fuel rods during storage and/or transportation. The experiment involves capturing and characterizing aerosols from a four-point bending experiment of fueled rod segments at ORNL’s Irradiated Fuels Examination Laboratory (IFEL). For this, a Marple cascade impactor (Series 290) with the ability to collect particles up to aerodynamic equivalent diameters of ~15 μm was tested for feasibility. The commercially available Marple cascade impactor design was modified for the experiment, where the cascade inlet was replaced with a 3D printed inlet nozzle. Collection efficiency curves were then generated with the modified impactor, and the cascade’s performance was tested using ISO dust capture experiments followed by SEM analysis of the collection and computational modeling. The current work highlights the performance testing and experimental validation of this modified Marple Impactor for spent nuclear fuel aerosol collection.

Kumar, Vineet↗
DOE OSTI2022

Harnessing interpretable and unsupervised machine learning to address big data from modern X-ray diffraction

The information content of crystalline materials becomes astronomical when collective electronic behavior and their fluctuations are taken into account. In the past decade, improvements in source brightness and detector technology at modern X-ray facilities have allowed a dramatically increased fraction of this information to be captured. Now, the primary challenge is to understand and discover scientific principles from big datasets when a comprehensive analysis is beyond human reach. We report the development of an unsupervised machine learning approach, X-ray diffraction (XRD) temperature clustering (X-TEC), that can automatically extract charge density wave order parameters and detect intraunit cell ordering and its fluctuations from a series of high-volume X-ray diffraction measurements taken at multiple temperatures. We benchmark X-TEC with diffraction data on a quasi-skutterudite family of materials, (Ca x Sr 1–x ) 3 Rh 4 Sn 13 , where a quantum critical point is observed as a function of Ca concentration. We apply X-TEC to XRD data on the pyrochlore metal, Cd 2 Re 2 O 7 , to investigate its two much-debated structural phase transitions and uncover the Goldstone mode accompanying them. We demonstrate how unprecedented atomic-scale knowledge can be gained when human researchers connect the X-TEC results to physical principles. Specifically, we extract from the X-TEC–revealed selection rules that the Cd and Re displacements are approximately equal in amplitude but out of phase. This discovery reveals a previously unknown involvement of 5d 2 Re, supporting the idea of an electronic origin to the structural order. Our approach can radically transform XRD experiments by allowing in operando data analysis and enabling researchers to refine experiments by discovering interesting regions of phase space on the fly.

36 MATERIALS SCIENCE↗
NASA NTRS1997

A Categorization of Dynamic Analyzers

Program analysis techniques and tools are essential to the development process because of the support they provide in detecting errors and deficiencies at different phases of development. The types of information rendered through analysis includes the following: statistical measurements of code, type checks, dataflow analysis, consistency checks, test data,verification of code, and debugging information. Analyzers can be broken into two major categories: dynamic and static. Static analyzers examine programs with respect to syntax errors and structural properties., This includes gathering statistical information on program content, such as the number of lines of executable code, source lines. and cyclomatic complexity. In addition, static analyzers provide the ability to check for the consistency of programs with respect to variables. Dynamic analyzers in contrast are dependent on input and the execution of a program providing the ability to find errors that cannot be detected through the use of static analysis alone. Dynamic analysis provides information on the behavior of a program rather than on the syntax. Both types of analysis detect errors in a program, but dynamic analyzers accomplish this through run-time behavior. This paper focuses on the following broad classification of dynamic analyzers: 1) Metrics; 2) Models; and 3) Monitors. Metrics are those analyzers that provide measurement. The next category, models, captures those analyzers that present the state of the program to the user at specified points in time. The last category, monitors, checks specified code based on some criteria. The paper discusses each classification and the techniques that are included under them. In addition, the role of each technique in the software life cycle is discussed. Familiarization with the tools that measure, model and monitor programs provides a framework for understanding the program's dynamic behavior from different, perspectives through analysis of the input/output data.

Lujan, Michelle R.↗
DOE OSTI2024

Economic, Greenhouse Gas, and Resource Assessment for Fuel and Protein Production from Microalgae: 2022 Algae Harmonization Update

This report presents an updated “harmonization study” documenting the collaborative analysis of saline microalgae cultivation and conversion to fuels and products. Four national laboratory modeling teams reconvened to investigate the resource, economic, and environmental sustainability implications of integrated systems encompassing large-scale algae farms and conversion biorefineries. Relative to prior harmonization analyses conducted by these partners, the present effort focuses on more near-term technology potential based on the use of nutrient-replete, high-protein algal biomass compositions (more readily achievable today without sacrificing cultivation productivity) coupled with individual algae farms varying in size but generally smaller at 3,900 acres on average (more realistic in practice than a fixed 5,000-acre farm scale previously considered). Additionally, the present assessment adds further granularity around carbon dioxide (CO 2 ) sourcing and transport via carbon capture of nearby point sources, as well as handling of high-saline cultivation media and resultant blowdown/disposal processing. Finally, this assessment focuses on conversion opportunities to produce both fuel (prioritizing sustainable aviation fuel [SAF], in this case via hydrothermal liquefaction) and protein products for the food and feed markets, recognizing growing needs for such products.

09 BIOMASS FUELS↗
NASA NTRS2014

Prediction Interval Development for Wind-Tunnel Balance Check-Loading

Results from the Facility Analysis Verification and Operational Reliability project revealed a critical gap in capability in ground-based aeronautics research applications. Without a standardized process for check-loading the wind-tunnel balance or the model system, the quality of the aerodynamic force data collected varied significantly between facilities. A prediction interval is required in order to confirm a check-loading. The prediction interval provides an expected upper and lower bound on balance load prediction at a given confidence level. A method has been developed which accounts for sources of variability due to calibration and check-load application. The prediction interval method of calculation and a case study demonstrating its use is provided. Validation of the methods is demonstrated for the case study based on the probability of capture of confirmation points.

Landman, Drew↗
DOE OSTI2025

Energy-efficient carbon capture from industrial point sources via commercially available green solvent and hollow fiber membrane contactors

Solvent-based absorption systems have emerged in the carbon capture space due to their high absorption capacities, reusability, and favorable energy requirements. Using diethyl sebacate as a solvent for pre- and post-combustion carbon capture has advantages over other solvents, including high hydrophobicity, low viscosity, low vapor pressure, high CO 2 solubility, high CO 2 selectivity, and being commercially available in large quantities. Despite these advantageous properties, the use of diethyl sebacate as a solvent for post-combustion carbon capture has not been studied in detail. To examine the capability of diethyl sebacate, a scalable, energy-efficient, hollow fiber membrane (microporous polypropylene and polyvinylidene fluoride) contactor (HFMC)-based process with low-cost and high surface area is investigated. A purity of 95.3 % CO 2 with 46 % recovery in one absorption stage was achieved, with a permeate flux over one magnitude greater than using a deep eutectic solvent in the same system. Technoeconomic analysis determined a ∼ 0.8 GJ per ton of CO 2 at a processing cost of ∼$93 per ton of CO 2 . Results from this work underscore the potential for utilizing green solvents in HFMC-based separation processes for effective carbon capture and provide a pathway towards practical deployment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Editorial: Harmonizing life cycle analysis (LCA) and techno-economic analysis (TEA) guidelines: a common framework for consistent conduct and transparent reporting of carbon dioxide removal and CCU technology appraisal

Stabilizing the climate will require significant efforts to curb greenhouse gas emissions, manage emissions that cannot be avoided, and remove as many legacy emissions as possible [i.e., carbon dioxide (International Energy Agency, 2020; Author Collective, 2022)]. In that context, negative emissions technologies will take CO 2 from the air (Direct Air Capture) or the water (Direct Ocean Capture) and permanently remove it (Roger et al., 2021) either by sequestering the CO 2 underground or converting it to so-called Track 1 materials (Sick et al., 2021) that have lifetimes of >100 years. Shorter-lived products that decompose back into CO 2 in <100 years are categorized as Track 2 materials and will at best be carbon neutral. A carbon neutral status can also be achieved if captured CO 2 from fossil-based point sources is sequestered or used to create Track 1 materials. Conversion of CO 2 from fossil-based sources to any Track 2 material and subsequent decomposition would add new fossil-based carbon to the atmosphere, constituting an ultimately undesirable process. The overall carbon footprint of a process or product will depend on many factors associated with the carbon production, use, and disposal phases.

54 ENVIRONMENTAL SCIENCES↗