Search NASA⌕ Search

SEARCH · Search NASA

Results for “scattering cross sections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Interpretation of glory undulations in scattering cross sections Amplitudes

Information on the interaction potential contained in the undulations in the energy dependence of the total scattering cross section is deduced by measuring the undulation amplitude. The amplitude is interpreted with emphasis on features that are independent of any specific assumptions about the form of the interaction potential. It is shown that the previously measured spacings of the undulations describe the area of the potential well, whereas the amplitudes provide a measure of the force in the vicinity of the distance of closest approach. This information can be used to test proposed potential models and to suggest ways of improving inadequate models; if the predicted spacing is too large, then the area of the well of the model is too small, and if the predicted amplitude is too small, then the repulsive wall of the potential is too steep.

Greene, E. F.↗
NASA NTRS1979

The total scattering cross sections for H2 + H2, D2 + D2, and HD + HD for relative collision energies below 10 meV

Relative total scattering cross sections for normal H2 + normal H2, para-H2 + para-H2, normal D2 + normal D2, ortho-D2 + ortho-D2, and HD + HD were measured at energy below 10 meV by colliding particles from two inclined nozzle beams. Cross sections for the H2 + H2 pairs were measured over a relative velocity range of 200-1450 m/s; the normal H2 + normal H2 results suggest a l = 3 orbiting resonance near 375 m/s while the para-H2 + para-H2 results have a l = 4 orbiting resonance near 585 m/s. This latter resonance has a peak energy of 1.79 meV and a FWHM of 1.05 meV. The D2 + D2 cross sections were measured over the velocity range of 190 to 1000 m/s and a minimum between the l = 4 and l = 5 orbiting resonances was observed. Some preliminary measurements on HD + HD over the range of 250-1250 m/s indicate a possible l = 4 orbiting resonance near 300 m/s. The experimental work compares favorably to cross sections calculated from a theoretical potential.

Johnson, D. L.↗
NASA NTRS1986

Differential electron scattering cross sections for the first optically forbidden and resonance transitions in Mg II, Zn II and Cd II

Differential electron scattering cross sections have been measured for dipole-forbidden and resonance transitions in Mg II, Zn II and Cd II in the angular range theta = 4-17 deg at 50 eV. These provide the first recorded angular distributions for an optically forbidden transition. It is found that while the cross section for excitation of the 4s (2)S-3d(9)4s(2) (2)D transition in Zn II is small, those for the 3s (2)S-3d (2)D, 4s (2)S (unresolved lines) in Mg II, and the 5s (2)S-4d(9)5s(2) D in Cd II are comparable in magnitude with the cross sections for resonance excitation. In addition, for Cd II it is found that the allowed and forbidden transitions have very similar angular distributions, and it is proposed that excitation to the 2D state may be dominated by a virtual 'double-dipole' transition via the 2P state. Also, the total excitation cross section of the resonance 2P state in Cd II is a factor of four higher than that predicted by the Gaunt factor approximation, suggesting that the accepted value for the oscillator strength may be too low.

Williams, I. D.↗
NASA NTRS1989

Principles and procedures for determining absolute differential electron-molecule (atom) scattering cross sections

Procedures and calibration techniques for measuring the absolute elastic and inelastic differential cross sections (DCS) for electron impact on molecular (atomic) species are described and illustrated by examples. The elastic DCS for the molecule under study is first determined by calibration against helium using the relative flow technique. The second step involves the production of energy-loss spectra for the instrument response function, the unfolding of overlapping inelastic structures and the normalization of inelastic intensities to the elastic cross sections. It is concluded that this method of determining absolute differential electron-molecule (atom) scattering cross sections is generally applicable and provides reliable results.

Nickel, J. C.↗
NASA NTRS1976

Absolute elastic differential electron scattering cross sections in the intermediate energy region. III - SF6 and UF6

A recently developed technique has been used to measure the ratios of elastic differential electron scattering cross sections (DCS) for SF6 and UF6 to those of He at electron impact energies of 5, 10, 15, 20, 30, 40, 50, 60, and 75 eV and at scattering angles of 20 to 135 deg. In order to obtain the absolute values of DCS from these ratios, He DCS of McConkey and Preston have been employed in the 20 to 90 deg range. At angles in the 90 to 135 deg range the recently determined cross sections of Srivastava and Trajmar have been utilized. From these DCS, elastic integral and momentum transfer cross sections have been obtained.

Srivastava, S. K.↗
NASA NTRS1985

Differential electron scattering cross sections for the 3 (2)S to 3 (2)P0 h, k transitions in Mg II - Comparison of experiment and theory

Angular differential electron scattering cross sections are reported for the unresolved inelastic 3s (2)S to 3p (2)P0 h, k transitions in Mg II for the first time. Relative differential cross sections have been measured at 35 eV and 50 eV in the angular range of Theta between 6 and 17 deg using the newly developed electron energy loss technique in a crossed electron-ion beam geometry. Theoretical values have been calculated in a five-state close-coupling approximation in which 3s, 3p, 3d, 4s, and 4p states were included, and to which measurements were normalized at Theta = 12 deg.

Williams, I. D.↗
NASA NTRS1986

Elastic electron scattering cross sections for molecular hydrogen

Using an electron-beam - molecular-beam apparatus and employing the relative flow technique, ratios of the differential elastic scattering cross sections (DCSs of H2 to He were measured at incident electron energies of 15-100 eV and over the angular range of 10-125 degrees. From these ratios, the absolute elastic DCSs for H2 were determined by normalization to accurate, available elastic DCSs of He. Since pure rotational structure was not resolved in this work, the DCSs reported are the sum of elastic and rotational excitations of H2 at room temperature. The reliability of the relative flow normalization to He was checked at each energy and angle by performing similar elastic DCS measurements on Ne (for which the cross sections are known). The resulting absolute Ne DCSs were found to be in good agreement (within 10 percent with the Ne elastic DCSs measured previously (Register and Trajmar, 1984). From the DCSs, integral and momentumtransfer cross sections were calculated. The present results are compared with other recent measurements.

Khakoo, M. A.↗
DOE OSTI2025

Measurement of the total compton scattering cross section between 6.5 and 11 GeV

The total cross section for Compton scattering off atomic electrons, $γ + e → γ' + e'$, was measured using photons with energies between 6.5 and 11.1 GeV incident on a 9 Be target as part of the PrimEx-eta experiment in Hall D at Jefferson Lab. This is the first measurement of this fundamental QED process within this energy range. The total uncertainties of the cross section, combining the statistical and systematic components in quadrature, averaged to 3.4 % across all energy bins. This not only demonstrates the capability of this experimental setup to perform precision cross-section measurements at forward angles but also allows us to compare with state-of-the-art QED calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1989

Differential elastic electron scattering cross sections for SO2

Differential cross sections for elastic electron scattering by SO2 were measured by utilizing a modulated, crossed-beam method and calibration against He. The energy and angular ranges were from 5 to 50 eV and from 12 to 156 deg, respectively. The present results are compared with earlier data of Orient et al. (1982), and it is suggested that their cross section values should be increased by about a factor of two.

Trajmar, Sandor↗
NASA NTRS1972

The relation between momentum transfer and capture and total scattering cross sections for ion-dipole collisions

Numerical values of momentum transfer cross sections sigma sub m for ion-dipole collisions are compared with the corresponding capture cross sections sigma sub c as a function of ion velocity and rotational temperature. For values of dipole moment mu from 1 to 4 Debyes the sigma sub m/sigma sub c ratio is in the range 1.2 to 2.0 (roughly). This is in contrast to the simple relation for Langevin collisions where sigma sub m/sigma sub c is equal to or approximately 1.10 independent of polarizability of the target atom. At low temperatures, the momentum transfer cross sections can be as large as 2000 A squared but they are only about 15 to 30 percent of the total scattering cross sections sigma sub S.

Dugan, J. V., Jr.↗
DOE OSTI2022

Thermal neutron scattering cross sections for amorphous carbon

Carbon materials are commonly found in both nuclear reactors and experimental systems. Various carbon structures occur in nuclear applications ranging from crystalline and nuclear graphite to the amorphous carbon seen in next-generation advanced reactor designs. Amorphous carbon is based on a randomized graphite-like structure and offers the unique ability to disperse impurities throughout the bulk composition. A graphite-like amorphous carbon system was modeled using the classical molecular dynamics (MD) code LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator). An improved version of the temperature-dependent Adaptive Intermolecular Reactive Empirical Bond Order (AIREBO) potential was used to model the carbon-carbon atomic interactions for the temperature at 300 K along with densities 1.60, 1.70, 1.85, and 2.23 g/cm{sup 3}. From the normalized velocity autocorrelation function (VACF), the phonon density of state (DOS) was then calculated as the Fourier transform of the normalized VACF. This DOS was then used as the primary input for the evaluation of the thermal scattering law (TSL, i.e. S(α,β)) and associated neutron thermal scattering cross sections. The TSL was analyzed using the Full Law Analysis Scattering System Hub (FLASSH). The amorphous structure results in shifts of the phonon DOS to lower energy modes than typically displayed for ideal crystalline graphite. This impact on the DOS is directly reflected in the TSL. Furthermore, the typical optical peak at 0.25 eV for the ideal graphite disappears for amorphous carbon, in good agreement with the expected structure. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1977

The estimation of pointing angle and normalized surface scattering cross section from GEOS-3 radar altimeter measurements

The statistical error of the pointing angle estimation technique is determined as a function of the effective receiver signal to noise ratio. Other sources of error are addressed and evaluated with inadequate calibration being of major concern. The impact of pointing error on the computation of normalized surface scattering cross section (sigma) from radar and the waveform attitude induced altitude bias is considered and quantitative results are presented. Pointing angle and sigma processing algorithms are presented along with some initial data. The intensive mode clean vs. clutter AGC calibration problem is analytically resolved. The use clutter AGC data in the intensive mode is confirmed as the correct calibration set for the sigma computations.

Brown, G. S.↗
DOE OSTI2020

(U) Energy-Dependent Perturbations of Scattering Cross Sections Using the PERT Card in MCNP6.2

The PERT card is used for first- and second-order perturbations of material densities, isotope densities, and isotope cross sections in the MCNP6.2 Monte Carlo code. Using the PERT card for firstand second-order sensitivities is straightforward. Reference 2 only looked at density perturbations with no energy dependence. This report looks at the sensitivity of a response to scattering cross sections as a function of energy and finds that there is a bug in the PERT capability. The SENSMG multigroup neutron sensitivity code was recently given the capability of computing sensitivities to user-specified reactions whose cross sections are available in a user-supplied NJOY output file. SENSMG uses the PARTISN multigroup discrete ordinates code for the transport. The NJOY-reaction capability is similar to that of SUSD3D, which also uses PARTISN for the multigroup transport. The PERT bug was identified by comparing MCNP6.2 outputs with SENSMG outputs. The next section of this report describes the test problem. Section III presents the MCNP6.2 PERT bug and proposes a solution. Section IV is a summary and conclusions. The SENSMG and MCNP input files are listed in the appendix.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS1980

Absolute elastic differential electron scattering cross sections for He - A proposed calibration standard from 5 to 200 eV

Absolute differential, integral, and momentum-transfer cross sections for electrons elastically scattered from helium are reported for the impact energy range of 5 to 200 eV. Angular distributions for elastically scattered electrons are measured in a crossed-beam geometry using a collimated, differentially pumped atomic-beam source which requires no effective-path-length correction. Below the first inelastic threshold the angular distributions were placed on an absolute scale by use of a phase-shift analysis. Above this threshold, the angular distributions from 10 to 140 deg were fitted using the phase-shift technique, and the resulting integral cross sections were normalized to a semiempirically derived integral elastic cross section. Depending on the impact energy, the data are estimated to be accurate to within 5 to 9%.

Register, D. F.↗
DOE OSTI2022

Thermal Neutron Scattering Cross Sections for Graphitic Amorphous Carbon

Carbon materials are commonly found in both nuclear reactors and experimental systems. Various carbon structures occur in nuclear applications ranging from crystalline and nuclear graphite to the amorphous carbon seen in next-generation advanced reactor designs. Amorphous carbon is based on a randomized graphite-like structure and offers the unique ability to disperse impurities throughout the bulk composition. A graphite-like amorphous carbon system was modeled using the classical molecular dynamics (MD) code LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator). An improved version of the temperature-dependent Adaptive Intermolecular Reactive Empirical Bond Order (AIREBO) potential was used to model the carbon-carbon atomic interactions for the temperature at 300 K along with densities 1.60, 1.70, 1.85, and 2.23 g/cm 3 . From the normalized velocity autocorrelation function (VACF), the phonon density of state (DOS) was then calculated as the Fourier transform of the normalized VACF. This DOS was then used as the primary input for the evaluation of the thermal scattering law (TSL, i.e. S(α,β)) and associated neutron thermal scattering cross sections. The TSL was analyzed using the Full Law Analysis Scattering System Hub (FLASSH). The amorphous structure results in shifts of the phonon DOS to lower energy modes than typically displayed for ideal crystalline graphite. This impact on the DOS is directly reflected in the TSL. Furthermore, the typical features and the optical graphitic peak at 0.25 eV for the ideal graphite DOS disappear for graphite-like amorphous carbon, which shows good agreement with the expected structure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

New constraints on the dark matter-neutrino and dark matter-photon scattering cross sections from TXS 0506+056

The flux of high energy neutrinos and photons produced in a blazar could get attenuated when they propagate through the dark matter spike around the central black hole and the halo of the host galaxy. Using the observation by IceCube of a few high-energy neutrino events from TXS 0506+056, and their coincident gamma ray events, we obtain new constraints on the dark matter-neutrino and dark matter-photon scattering cross sections. Our constraints are orders of magnitude more stringent than those derived from considering the attenuation through the intergalactic medium and the Milky Way dark matter halo. When the cross-section increases with energy, our constraints are also stronger than those derived from the CMB and large-scale structure.

79 ASTRONOMY AND ASTROPHYSICS↗