Search NASA⌕ Search

SEARCH · Search NASA

Results for “CHARTS - INTERCOOLERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Synopsis of Mid-latitude Radio Wave Absorption in Europe

Radio wave absorption data covering almost two years from Europe to Central Asia are presented. They are normalized by relating them to a reference absorption. Every day these normalized data are fitted to a mathematical function of geographical location in order to obtain a daily synopsis of radio wave absorption. A film of these absorption charts was made which is intended to reveal movements of absorption or absorption anomaly. In addition, radiance (temperature) data from the lower D-region are also plotted onto these charts.

Torkar, K. M.↗

A survey of major east coast snowstorms, 1960-1983. Part 2: Case studies of eighteen storms

Snowfall, surface and upper air charts, and available satellite images are presented for eighteen major East Coast snowstorms that occurred between 1960 and 1983. The charts and descriptions of key fields are provided so that students, weather forecasters, and researchers alike can visualize how a large sample of major winter cyclones form and intensify. Although there are noted similarities in certain aspects of the surface and upper tropospheric development of the storms, significant case-to-case variability precludes the ability to effectively composite these weather systems.

Kocin, P. J.↗

Modulated voltage metastable ionization detector

The output current from a metastable ionization detector (MID) is applied to a modulation voltage circuit. An adjustment is made to balance out the background current, and an output current, above background, is applied to an input of a strip chart recorder. For low level concentrations, i.e., low detected output current, the ionization potential will be at a maximum and the metastable ionization detector will operate at its most sensitive level. When the detected current from the metastable ionization detector increases above a predetermined threshold level, a voltage control circuit is activated which turns on a high voltage transistor which acts to reduce the ionization potential. The ionization potential applied to the metastable ionization detector is then varied so as to maintain the detected signal level constant. The variation in ionization potential is now related to the concentration of the constituent and a representative amplitude is applied to another input of said strip chart recorder.

Carle, G. C.↗

Topographic mapping of the moon

Contour maps of the moon have been compiled by photogrammetric methods that use stereoscopic combinations of all available metric photographs from the Apollo 15, 16, and 17 missions. The maps utilize the same format as the existing NASA shaded-relief Lunar Planning Charts (LOC-1, -2, -3, and -4), which have a scale of 1:2,750,000. The map contour interval is 500 m. A control net derived from Apollo photographs by Doyle and others was used for the compilation. Contour lines and elevations are referred to the new topographic datum of the moon, which is defined in terms of spherical harmonics from the lunar gravity field. Compilation of all four LOC charts was completed on analytical plotters from 566 stereo models of Apollo metric photographs that cover approximately 20 percent of the moon. This is the first step toward compiling a global topographic map of the moon at a scale of 1:5,000,000.

Wu, S. S. C.↗

Fundamental aerodynamic characteristics of delta wings with leading-edge vortex flows

An investigation of the aerodynamics of sharp leading-edge delta wings at supersonic speeds has been conducted. The supporting experimental data for this investigation were taken from published force, pressure, and flow-visualization data in which the Mach number normal to the wing leading edge is always less than 1.0. The individual upper- and lower-surface nonlinear characteristics for uncambered delta wings are determined and presented in three charts. The upper-surface data show that both the normal-force coefficient and minimum pressure coefficient increase nonlinearly with a decreasing slope with increasing angle of attack. The lower-surface normal-force coefficient was shown to be independent of Mach number and to increase nonlinearly, with an increasing slope, with increasing angle of attack. These charts are then used to define a wing-design space for sharp leading-edge delta wings.

Wood, R. M.↗

Aeronautical facilities catalogue. Volume 2: Airbreathing propulsion and flight simulators

Volume two of the facilities catalogue deals with Airbreathing Propulsion and Flight Simulation Facilities. Data pertinent to managers and engineers are presented. Each facility is described on a data sheet that shows the facility's technical parameters on a chart and more detailed information in narratives. Facilities judged comparable in testing capability are noted and grouped together. Several comprehensive cross-indexes and charts are included.

Penaranda, F. E.↗

Avionics electromagnetic interference immunity and environment

Aircraft electromagnetic spectrum and radio frequency (RF) field strengths are charted, profiling the higher levels of electromagnetic voltages encountered by the commercial aircraft wiring. Selected military, urban, and rural electromagnetic field levels are plotted and provide a comparison of radiation amplitudes. Low frequency magnetic fields and electric fields from 400 H(Z) power systems are charted versus frequency and wire separation to indicate induced voltages on adjacent or neighboring circuits. Induced EMI levels and attenuation characteristics of electric, magnetic, RF fields, and transients are plotted and graphed for common types of wire circuits. The significance of wire circuit returns and shielding is emphasized to highlight the techniques that help block the paths of electromagnetic interference and maintain avionic interface signal quality.

Clarke, C. A.↗

Large-scale structure of the sun's corona from radio observations using the Clark Lake Radioheliograph

Meterwave maps of the solar corona made with the Clark Lake Radioheliograph at 30.9, 50, and 73.8 MHz for one solar rotation are presented. They are compared and contrasted with optical data: 10,830 A maps, white-light coronagraph images (SOLWIND and Mauna Loa K coronameter), and forbidden line scans. Most of the sources in the radio maps persist for two days or more, and appear to rotate approximately with the solar rate. A coronal hole seen against the disk at all three frequencies shows interesting similarities and significant differences with the optical signatures of the hole. Elongated features of the 50 MHz corona correspond rather well to the azimuthal position of white light streamers seen in SOLWIND images. Synoptic charts made from the radio maps show overall similarities to synoptic charts constructed from (limb) coronagraph data. Some of the differences may result from the different weightings given by the radio and optical data to density and temperature, or by the different sensitivities to nonradial geometries. It is shown that the combined use of meter wave and optical images provides considerable new insights into the three-dimensional structure of the low to middle corona.

Kundu, M. R.↗

Radio studies of large scale structures of the Sun's corona and transient activity

The use of meter-decimeter wavelength imaging observations for four different kinds of studies of solar coronal activity is discussed. (1) Large scale structure of the upper corona; daily imaging observations permit comparison of radio images with white light images from space and ground observation, generation of synoptic charts similar to white light coronagraph synoptic charts, and comparison of radio brightness enhancements and deficiencies with bright coronal streamers and coronal holes. (2) Relative positions of type III burst sources and coronal streamers as observed by Solwind experiment on the P-78-1 satellite and by the HAO C/P experiment aboard the SMM; infer the paths of type III emitting electrons in dense coronal streamers, and from multifrequency observations derive electron density distributions above active regions near the limb. (3) Non-flare associated type II/type IV bursts associated with coronal streamer disruption events; such type IV sources have a rather slow velocity (approx = to or less than 100 km/s) CMEs. (4) Meter-decimeter microbursts; these are short duration (2-10 sec) weak-type III-like bursts, produced at the fundamental plasma frequency by plasma radiation processes which have important differences from the standard mechanisms used to explain the strong type III bursts.

Kundu, Mukul R.↗

Northwest Airlines flight experiments

An experiment was conducted in which real-time Total Ozone Mapping Spectrometer (TOMS) data was compared with Northwest Airlines upper air charts. It was demonstrated that the regions of steep gradient in total ozone corresponded with fronts in the upper troposphere, specifically breaks in the tropopause associated with jet streams. Other small scale structures in the ozone could be related to minor trough and ridge lines. This suggests that the relation between total ozone and tropopause height might apply even on relatively small scales, and an analysis produced high correlation coefficients provided that the air mass origin was considered. In a second test, cabin ozone mixing at 37,000 ft. varied from less than 100 ppb (300 DU total ozone) to greater than 300 ppb in a trough (400 DU total ozone). A third analysis showed that clear air turbulence was located where upper air fronts were in rapid motion as suggested by comparison of the 1200 UT synoptic charts and the ozone map taken about six hours later.

Krueger, Arlin J.↗

Dynamic loading of spur gears with linear or parabolic tooth profile modification

A computer simulation was conducted to investigate the effects of both linear and parabolic tooth profile modification on the dynamic response of low-contact-ratio spur gears. The effect of the total amount of modification and the length of the modification zone were studied at various loads and speeds to find the optimal profile modification for minimal dynamic loading. Design charts consisting of normalized maximum dynamic load curves were generated for gear systems operated at various loads and with different tooth profile modification. An optimum profile modification can be determined from these design charts to minimize the dynamic loads of spur gear systems.

Lin, Hsiang Hsi↗

Dexterity analysis and robot hand design

Understanding about a dexterous robot hand's motion ranges is important to the precision grasping and precision manipulation. A planar robot hand is studied for object orientation, including ranges of motion, measures with respect to the palm, position reaching of a point in the grasped object, and rotation of the object about the reference point. The rotational dexterity index and dexterity chart are introduced and an analysis procedure is developed for calculating these quantities. A design procedure for determining the hand kinematic parameters based on a desired partial or complete dexterity chart is also developed. These procedures have been tested in detail for a planar robot hand with two 2- or 3-link fingers. The derived results are shown to be useful to performance evaluation, kinematic parameter design, and grasping motion planning for a planar robot hand.

Li, LU↗

Common Graphics Library (CGL). Volume 2: Low-level user's guide

The intent is to instruct the users of the Low-Level routines of the Common Graphics Library (CGL). The Low-Level routines form an application-independent graphics package enabling the user community to construct and design scientific charts conforming to the publication and/or viewgraph process. The Low-Level routines allow the user to design unique or unusual report-quality charts from a set of graphics utilities. The features of these routines can be used stand-alone or in conjunction with other packages to enhance or augment their capabilities. This library is written in ANSI FORTRAN 77, and currently uses a CORE-based underlying graphics package, and is therefore machine-independent, providing support for centralized and/or distributed computer systems.

Taylor, Nancy L.↗

Computer-aided design of high-contact-ratio gears for minimum dynamic load and stress

A computer aided design procedure is presented for minimizing dynamic effects on high contact ratio gears by modification of the tooth profile. Both linear and parabolic tooth profile modifications of high contact ratio gears under various loading conditions are examined and compared. The effects of the total amount of modification and the length of the modification zone were systematically studied at various loads and speeds to find the optimum profile design for minimizing the dynamic load and the tooth bending stress. Parabolic profile modification is preferred over linear profile modification for high contact ratio gears because of its lower sensitivity to manufacturing errors. For parabolic modification, a greater amount of modification at the tooth tip and a longer modification zone are required. Design charts are presented for high contact ratio gears with various profile modifications operating under a range of loads. A procedure is illustrated for using the charts to find the optimum profile design.

Lin, Hsiang Hsi↗

Dynamic loading of spur gears with linear or parabolic tooth profile modifications

A computer simulation was conducted to investigate the effects of both linear and parabolic tooth profile modification on the dynamic response of low-contact-ratio spur gears. The effect of the total amount of modification and the length of the modification zone were studied at various loads and speeds to find the optimal profile modification for minimal dynamic loading. Design charts consisting of normalized maximum dynamic load curves were generated for gear systems operated at various loads and with different tooth profile modification. An optimum profile modification can be determined from these design charts to minimize the dynamic loads of spur gear systems.

Lin, H. H.↗

Echo asymmetry and its impact on NEXRAD storm identification

The effects of echo shape and radar viewing angle on the detections of cells are investigated. A chart representing the probability of detection of a storm is derived. Case studies from Florida and Alabama are analyzed in order to assess the performance of NEXRAD. It is noted that the current thresholds for storm identification for NEXRAD are inadequate for identifying small lightning-producing storms. Time-history and radar-reflectivity charts for the storms are provided.

Buechler, Dennis E.↗

The space exploration initiative

A number of view graph charts are presented which outline the presentation. Outlined are reasons for going to Mars, why it is necessary to go to the Moon first, and the presidential decision on the space exploration initiative. Other representative charts are entitled: Lunar transportation system requirement drivers; Mars transportation system requirement drivers; National space policy goals; Exploration hardware needed; Mars mission profile; Science on the Moon and Mars; and Two independent reviews.

Priest, Pete↗

Five basic steps to problem trending

Five basic steps to problem trending evolved from experience in trending problems on Space Shuttle hardware are discussed: extracting data; constructing a Pareto chart of all failure modes; constructing normalized subsystem, component, and failure-mode trend charts; identifying trend direction; and providing a summary assessment. The five-step method has been useful for identifying failure modes of concern, evaluating the effectiveness of corrective actions, and determining funding allocation.

Bombara, Elwood L.↗