Search NASA⌕ Search

SEARCH · Search NASA

Results for “Injection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Magnetospheric particle injection and the upstream ion event of September 5, 1984

Energetic particle data from the AMPTE Charge Composition Explorer (CCE) spacecraft in the outer dayside magnetosphere are examined during the period of an upstream ion event observed by the AMPTE Ion Release Module (IRM) spacecraft on September 5, 1984. The CCE data reveal the following: (1) an ion enhancement was observed at about 0040 UT in near coincidence with a substorm onset at about 0035 UT, approximately 15 minutes prior to the onset of the event upstream of the shock; (b) ions of both solar-wind - H(2+) Fe-group - and ionospheric O(+) - origin over a broad energy range (about 20 keV to greater than 1350 keV) were injected at substorm onset; (3) the time evolution of the H(+), He(2+), and O(+) pitch angle distributions markedly differed, with O(+) exhibiting mostly enhancements at off-90-deg angles for the first hour after injection; (4) an enhancement in the Fe-group ions inside the magnetosphere at L = about 6.4 occurred simultaneously with the appearance of an O(+) burst upstream of the shock. The CCE observations, taken together with the simultaneously observed IRM ion event, suggest that a plausible explanation for the appearance of upstream ions is leakage from the magnetosphere into the upstream region, rather than the alternative explanation which requires in situ acceleration of solar wind ions via the Fermi Mechanims.

Krimigis, S. M.↗

Contingency power for small turboshaft engines using water injection into turbine cooling air

Because of one engine inoperative requirements, together with hot-gas reingestion and hot day, high altitude takeoff situations, power augmentation for multiengine rotorcraft has always been of critical interest. However, power augmentation using overtemperature at the turbine inlet will shorten turbine life unless a method of limiting thermal and mechanical stresses is found. A possible solution involves allowing the turbine inlet temperature to rise to augment power while injecting water into the turbine cooling air to limit hot-section metal temperatures. An experimental water injection device was installed in an engine and successfully tested. Although concern for unprotected subcomponents in the engine hot section prevented demonstration of the technique's maximum potential, it was still possible to demonstrate increases in power while maintaining nearly constant turbine rotor blade temperature.

Biesiadny, Thomas J.↗

Hydrogen scramjet with sidewall injection - Shock tunnel simulations

A free-piston shock tunnel has been used to obtain test data on a scramjet combustion chamber with sidewall injection. The results obtained indicate that combustion was strongly influenced by a region of fuel whose temperature was held below its ignition temperature by wall-cooling effects; this increased the fraction of unburned fuel and resulted in a significant loss of specific impulse. Aerodynamic heating would keep the walls above hydrogen ignition temperature in an actual scramjet powerplant, however. Maximum specific impulse was obtained with a combination of parallel and transverse injection in a long combustion chamber, followed by a dual stage expansion.

Morgan, R. G.↗

Lateral jet injection into swirling combustor flowfields

An experimental program has been conducted to ascertain the effects of the number of lateral jets, the jet velocity ratio, and the crossflow swirl strength, on the isothermal flowfield patterns in jets injected normally to a round-section crossflow. Attention has been given to the trajectory, penetration, and mixing efficiency of the lateral injection, using flow visualization, pitot-probe and hot-wire methods. In addition, such predictive techniques as a simple, explicit, fully three-dimensional turbulent computer code have been employed.

Lilley, David G.↗

Dynamic substorm injections - Similar magnetospheric phenomena at earth and Mercury

Correlations between energetic electrons, plasma electrons, and magnetic fields during the Mercury 1 energetic particle events are examined and comparisons are made with several well-documented substorm injections at the earth. The data reveal that the B and B-prime events possess the same characteristics as single-point observations of terrestrial dynamic injections. Several recently discovered correlations between the energetic electrons, plasma electrons, and magnetic fields at Mercury are discussed.

Christon, S. P.↗

Charge states of substorm particle injections

The charge states of ions injected during substorms are discussed. Observations from the Medium Energy Particle Analyzer (McEntire et al., 1985) are used to time the arrival of peak proton, helium, and oxygen fluxes at the Charge Composition Explorer satellite. In addition, the dominant ion charge states of these species in the energy range 72-1000 keV are determined. It is found that the freshly-injected heluim (72-240 keV) and oxygen (137-365 keV) are singly ionized, but that more energetic oxygen (greater than 365 keV) is multiply charged. It is suggested that this result implies either a dominant ionospheric source at the lower energies with a solar-wind source at the higher energies, or an energization of the preexisting ring-current population.

Sibeck, D. G.↗

Laboratory behavior of a plasma plume injected into the magnetized plasma flow

Plasma plumes are injected into the tail of the simulated earth's magnetosphere produced by an interaction between the simulated solar wind and a magnetic dipole. The behavior of laboratory artificial plasma plumes injected into the magnetized plasma flow is discussed in conjunction with the AMPTE artificial comet experiments (Minami et al., 1986) and other active chemical release experiments in space.

Minami, Shigeyuki↗

ARCS 3 ionospheric artificial argon ion beam injections - Waves near the heavy ion gyrofrequencies

Low-frequency electric field data below the proton gyrofrequency are presented for the duration of the argon ion beam experiment conducted as part of the Argon Release for Controlled Studies (ARCS) program. An argon ion beam was injected from the subpayload antiparallel or perpendicular to the magnetic field at altitudes from 250 to 405 km. During the injections, the wave spectra were broadband near the subpayload and narrow-band near heavy ion gyrofrequencies at perpendicular separation distances between 42 and 254 m. It is suggested that the narrow-band waves are associated with both the perpendicular argon ion beam and an unexpected flux of low-energy ions which peaked in energy near 15 eV and pitch angle near 90 deg with respect to the magnetic field.

Erlandson, R. E.↗

Low-frequency electrostatic instabilities excited by injections of an electron beam in space

One-dimensional particle simulations have been carried out to study the low-frequency broadband electrostatic noise that propagates almost perpendicularly from the magnetic field line when a nonrelativistic electron beam is injected into space from a spacecraft. For T(e) = T(i) the electrostatic ion cyclotron waves appear as well as the waves near the lower hybrid frequency. When the magnetic field is reduced so that Omega(e) is much less than omega(pe) in a nonisothermal plasma, T(e) greater than T(i) oblique ion acoustic instabilities appear to propagate almost perpendicular to the magnetic field. In addition, a very low frequency mode at omega much less than Omega(i) is found to be generated by the electrons flowing into the conductor. Both the injected beam electrons as well as the ambient electrons flowing into the spacecraft are responsible for generating those instabilities, which accelerate ions perpendicular to the magnetic field.

Hwang, Y. S.↗

Injectant mole-fraction imaging in compressible mixing flows using planar laser-induced iodine fluorescence

A technique is described for imaging the injectant mole-fraction distribution in nonreacting compressible mixing flow fields. Planar fluorescence from iodine, seeded into air, is induced by a broadband argon-ion laser and collected using an intensified charge-injection-device array camera. The technique eliminates the thermodynamic dependence of the iodine fluorescence in the compressible flow field by taking the ratio of two images collected with identical thermodynamic flow conditions but different iodine seeding conditions.

Hartfield, Roy J., Jr.↗

Particle injection and acceleration at earth's bow shock - Comparison of upstream and downstream events

The injection and acceleration of thermal solar wind ions at the quasi-parallel earth's bow shock during radial interplanetary magnetic field conditions is investigated. Active Magnetospheric Particle Tracer Explorers/Ion Release Module satellite observations of complete proton spectra, and of heavy ion spectra above 10 keV/Q, made on September 12, 1984 near the nose of the shock, are presented and compared to the predictions of a Monte Carlo shock simulation which includes diffusive shock acceleration. It is found that the spectral observations are in good agreement with the predictions of the simulation when it is assumed that all accelerated ions originate in the solar wind and are injected into the acceleration mechanism by thermal leakage from the downstream plasma. The efficiency, which is determined directly from the downstream observations, is high, with at least 15 percent of the solar wind energy flux going into accelerated particles. The comparisons allow constraints to be placed on the rigidity dependence of the scattering mean free path and suggest that the upstream solar wind must be slowed substantially by backstreaming accelerated ions prior to undergoing a sharp transition in the viscous subshock.

Ellison, Donald C.↗

Conjugate echoes of artificially injected electron beams detected optically by means of new image processing

Artificial auroral streaks were detected following two upward injections of energetic electrons (38 keV and 26 keV) from the Echo 4 rocket-borne electron accelerator. Newly developed image processing techniques are used to detect and describe the streaks. It is found that the potential of the payload remained below 1 kV during 45 mA injections at an altitude of 210 km. The echo streaks show little dispersion in time or space, suggesting that the portion of the beam returning to the northern hemisphere loss cone remained collimated and nearly monoenergetic. There was, however, a 70 percent loss in the return flux. The causes of this loss are discussed.

Hallinan, Thomas J.↗

Effects of streamwise vorticity injection on turbulent mixing layer development

This paper investigates the effect of injected strong streamwise vorticity on the structure and development of a plane mixing layer originating from tripped boundary layers. The experiments were conducted in a mixing layer wind tunnel consisting of two separate legs which were driven individually by centrifugal blowers. It was found that, while the vorticity injection increased the growth rate in the near-field, the asymptotic growth rate was reduced by a factor of about two, together with the peak Reynolds stress levels. The result is attributed to the effect of the relatively strong and short wavelength streamwise vorticity in making the spanwise structures more three-dimensional and slowing down their pairing process, thus reducing entrainment, and hence growth.

Bell, James H.↗

Injection efficiency of bound modes

Previous work on efficiency of light injection into the core of a fiber from a thin film and a bulk distribution of sources in the cladding have used the fields of a weakly guiding fiber. This approximation simplifies the analysis of the power efficiency by introducing universal values for the eigenvalues of different fibers with the same V-number, but cannot predict accurately the behavior of the injected light into a fiber with arbitrary differences in indices of refraction. The exact field solution was used in the expressions of the power efficiency, p sub eff, and its behavior as a function of the fiber parameter was analyzed. Weakly guiding results obtained previously are confirmed. However, P sub eff does not always increase with the V-number but with the difference in the indices of refraction, eta sub core-eta sub clad. For the bulk distribution it was found that P sub eff increases with the wavelength, lambda, and decreases with the fiber core radius, a, i.e., it decreases with the V-number. However, for the thin film, the P sub eff remains almost constant with lambda and the fiber core radius.

Egalon, Claudio Oliveira↗

Abnormal fault-recovery characteristics of the fault-tolerant multiprocessor uncovered using a new fault-injection methodology

An investigation was made in AIRLAB of the fault handling performance of the Fault Tolerant MultiProcessor (FTMP). Fault handling errors detected during fault injection experiments were characterized. In these fault injection experiments, the FTMP disabled a working unit instead of the faulted unit once in every 500 faults, on the average. System design weaknesses allow active faults to exercise a part of the fault management software that handles Byzantine or lying faults. Byzantine faults behave such that the faulted unit points to a working unit as the source of errors. The design's problems involve: (1) the design and interface between the simplex error detection hardware and the error processing software, (2) the functional capabilities of the FTMP system bus, and (3) the communication requirements of a multiprocessor architecture. These weak areas in the FTMP's design increase the probability that, for any hardware fault, a good line replacement unit (LRU) is mistakenly disabled by the fault management software.

Padilla, Peter A.↗

Consequences of relativistic proton injection in active galactic nuclei

The processes are analyzed by which extremely relativistic protons lose energy under the conditions thought to apply in the central engines of active galactic nuclei. Analytic formulae are derived which permit the consequences of relativistic proton injection under a variety of conditions to be predicted. Different proton cooling mechanisms are compared for a power-law proton injection function and two types of background radiation spectra: power-law and power-law plus blackbody. The kinetic equations for neutrons and protons are examined, and it is shown how to calculate the energy distributions of primary gamma rays and escaping neutrons and neutrinos.

Begelman, Mitchell C.↗

Simulated fault injection - A methodology to evaluate fault tolerant microprocessor architectures

A simulation-based fault-injection method for validating fault-tolerant microprocessor architectures is described. The approach uses mixed-mode simulation (electrical/logic analysis), and injects transient errors in run-time to assess the resulting fault impact. As an example, a fault-tolerant architecture which models the digital aspects of a dual-channel real-time jet-engine controller is used. The level of effectiveness of the dual configuration with respect to single and multiple transients is measured. The results indicate 100 percent coverage of single transients. Approximately 12 percent of the multiple transients affect both channels; none result in controller failure since two additional levels of redundancy exist.

Choi, Gwan S.↗