Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear structure data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Nuclear structure functions at a future electron-ion collider

The quantitative knowledge of heavy nuclei's partonic structure is currently limited to rather large values of momentum fraction x { robust experimental constraints below x ~ 10 -2 at low resolution scale Q 2 are particularly scarce. This is in sharp contrast to the free proton's structure which has been probed in deep inelastic scattering (DIS) measurements down to x ~ 10 -5 at perturbative resolution scales. The construction of an Electron-Ion Collider (EIC) with a possibility to operate with a wide variety of nuclei, will allow one to explore the low-x region in much greater detail. In the present paper we simulate the extraction of the nuclear structure functions from measurements of inclusive and charm reduced cross sections at an EIC. The potential constraints are studied by analyzing simulated data directly in a next-to-leading order global fit of nuclear parton distribution functions based on the recent EPPS16 analysis. A special emphasis is placed on studying the impact an EIC would have on extracting the nuclear gluon PDF, the partonic component most prone to non-linear e ects at low Q 2 . In comparison to the current knowledge, we find that the gluon PDF can be measured at an EIC with significantly reduced uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Calculation of energy levels, lifetimes and radiative data for La XXIX to Sm XXXIV

Highlights: • Lowest 27 levels for La XXIX to Sm XXXIV are calculated. • Radiative data for E1, E2, M1 and M2 transitions within lowest 27 levels are presented. • Effect of nuclear charge on the transition wavelength of allowed EUV transitions is studied graphically. • Effect of nuclear charge on transition probability of allowed EUV transitions is studied graphically. • Lifetimes for lowest 27 fine structure levels are provided. We present the most comprehensive atomic data for La XXIX to Sm XXXIV with single electron excitation from M-shell to N-shell and N-shell to higher shells. We have presented energy levels, lifetimes and radiative data using Multi-configuration Dirac–Fock (MCDF) method for the lowest 27 states belonging to the configuration 3d{sup 10}4l (l=0,1,2,3), 3d{sup 10}5l (l=0,1,2,3,4), 3d{sup 10}6l (l=0,1,2,3,4) and 3d{sup 9}4s{sup 2}. We have also considered relativistic effects by incorporating quantum electrodynamics (QED) and Breit corrections. We have made comparisons of our presented results with available theoretical as well as experimental results and a good agreement is achieved. Further, we have also reported energy levels by performing distorted wave calculations with fully relativistic flexible atomic code (FAC). The calculations match well with MCDF results. Additionally, we have investigated the effect of nuclear charge on transition wavelength and radiative rates for strong Extreme Ultraviolet (EUV) transitions from n=4→4. We believe that our reported data in this work may be useful in various applications of lanthanide ions related to broad area of research such as applied physics, laser physics and astrophysics etc.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ultralow Q values for neutrino mass measurements

We investigate weak nuclear decays with extremely small kinetic energy release (Q value) and thus extremely good sensitivity to the absolute neutrino mass scale. In particular, we consider decays into excited daughter states, and we show that partial ionization of the parent atom can help to tune Q values to <<1 keV. We discuss several candidate isotopes undergoing beta{sup +}-, bound state beta, or electron capture decay and come to the conclusion that a neutrino mass measurement using low-Q decays might only be feasible if no ionization is required and if future improvements in isotope production technology, nuclear mass spectroscopy, and atomic structure calculations are possible. Experiments using ions, however, are extremely challenging because of the large number of ions that must be stored. New precision data on nuclear excitation levels could help to identify further isotopes with low-Q decay modes and possibly less challenging requirements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ultra-low Q values for neutrino mass measurements

We investigate weak nuclear decays with extremely small kinetic energy release (Q value) and thus extremely good sensitivity to the absolute neutrino mass scale. In particular, we consider decays into excited daughter states, and we show that partial ionization of the parent atom can help to tune Q values to << 1 keV. We discuss several candidate isotopes undergoing {beta}{sup {+-}}, bound state {beta}, or electron capture decay, and come to the conclusion that a neutrino mass measurement using low-Q decays might only be feasible if no ionization is required, and if future improvements in isotope production technology, nuclear mass spectroscopy, and atomic structure calculations are possible. Experiments using ions, however, are extremely challenging due to the large number of ions that must be stored. New precision data on nuclear excitation levels could help to identify further isotopes with low-Q decay modes and possibly less challenging requirements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probing gluon saturation and nuclear structure in photon-nucleus collisions

We calculate exclusive vector meson photoproduction within the Color Glass Condensate framework in high-energy photon-nucleus scattering probed experimentally in ultra peripheral heavy ion collisions at RHIC and at the LHC. When the free parameters are constrained by the γ + p data from HERA, we predict significant nuclear suppression for both the coherent and incoherent photoproduction cross section in the TeV range. Our results indicate that the LHC data prefers even stronger saturation effects at the highest collision energies. Furthermore, we demonstrate how the linear polarization of photons in ulra peripheral collisions generates azimuthal modulations in the decay products of the exclusively produced vector meson. We show how these measurements can probe details of the nuclear geometry, specifically the deformed structure of the uranium nuclei.

Mäntysaari, Heikki [University of Jyväskylä (Finla↗

OSTI Semantic Thesaurus v1

The OSTI Semantic Thesaurus is a reference for scientific and technical terms and relationships. The term data is used to implement keyword-to-concept mapping in OSTI.GOV searches, where searched term(s) will be mapped to related scientific concepts, allowing the end user to retrieve results related to their search terms and also explore narrower and similar concepts. The OSTI Semantic Thesaurus originally inherited data and structure from the INIS/ETDE Thesaurus (https://www.etde.org/edb/IAEA-INIS-ETDE-01-2013-08.pdf), which was a controlled terminology for indexing information within the subject scopes of the International Nuclear Information System (INIS) and the Energy Technology Data Exchange (ETDE). The data has been expanded upon since that time with the inclusion of scientific concepts from sources like Wikidata, and through manual curation. This dataset is an export from the OSTI Semantic Thesaurus in RDF/SKOS format, which is specifically suited for representation of controlled vocabularies like thesauri. While the full thesaurus includes additional relation types which may be included in future revisions, this export is limited to broader, narrower, and related term relations. Definitions and scope notes are included where available.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Measurement of the $M_A^{QE}$ parameter using multiple quasi-elastic dominated sub-samples in the minos near detector

The Main Injector Neutrino Oscillation Search (MINOS) is a two detector, long baseline neutrino oscillation experiment. The MINOS near detector is an ironscintillator tracking/sampling calorimeter and has recorded the world’s largest data set of neutrino interactions in the 0-5 GeV region. This high statistics data set is used to make precision measurements of neutrino interaction cross-sections on iron. The Q 2 dependence in charged current quasi-elastic (CCQE) scattering probes the axial and vector structure (form factor) of the nucleon/nuclear target, and nuclear effects in neutrino scattering. Presented here is a study of the MINOS Data that will introduce a method that improves the existing MINOS CCQE analysis. This analysis uses an additional CCQE dominated sub-sample from a different kinematic region to reduce correlations between fit parameters in the existing MINOS CCQE analysis. The measured value of the axial-vector mass is M QE A = 1.312 +0.037 -0.038 (fit) +0.123 -0.265 (syst.) GeV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SeeSnake: Radiological Characterisation of Complex Nuclear Spaces - 16162

Decommissioning of retired nuclear plant can be a difficult task for many reasons. A number of locations around the world have active cells awaiting decommissioning without a clear understanding of the internal structure and possible locations of radiological sources. Furthermore, many nuclear plant drawings and models do not reflect the 'as built' dimensions, and precise data required for safe and cost effective decommissioning is not readily available. This presents decommissioning teams with significant challenges when attempting to plan and execute their decommissioning programs. Due to the complex nature and constrained environments typical of legacy nuclear plant, it is often not possible to deploy traditional remote handling/inspection technologies. Even where possible, identifying the correct sensor, or suite of sensors, to characterize the environment is problematic. To address this common issue Create Technologies Ltd (Createc) and OC Robotics collaborated on SeeSnake, a project aimed at leveraging radiometric source mapping with 3D scanning and confined space remote handling. Createc's imaging and sensing systems have strong capabilities in the nuclear industry, led by their N-Visage products, as do OC Robotics' snake-arm robots as a remote deployment platform for confined and hazardous spaces. The snake-arm robot enables access through small penetrations with the ability to navigate internal structures and other obstacles without support from the environment; whilst multiple re-positioning of the N-Visage sensor, integrated with the snake-arm system, enables a thorough 3D map to be created. The SeeSnake project demonstrates the integrated systems ability to capture valuable radiation, visual and positional data enabling the characterization of a complex active environment. To mature the concept into an integrated, functional technology the SeeSnake partners overcame a number of challenges before demonstrating to key stakeholders in the UK nuclear industry. This paper describes these challenges and the solutions implemented, along with the results from early system trials and stakeholder demonstrations. It also addresses the next steps for the SeeSnake technology and identifies a number of applications which will may benefit from its exploitation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Physical implications of the extrapolation and statistical bootstrap of nucleon structure function ratios F 2 n F 2 p for mirror nuclei He 3 and H 3

A nuclear physics example of statistical bootstrap is used on the MARATHON nucleon structure function ratio data in the quark momentum fraction regions x B → 0 and x B → 1. The extrapolated F 2 ratio as quark momentum fraction x B → 1 is $\frac{F^n_2}{F^p_2}$ → 0.4 ± 0.05 and this value is compared to theoretical predictions. The extrapolated ratio when x B → 0 favors the simple model of isospin symmetry with the complete dominance of sea quarks at low momentum fraction. At high- x B , the proton quark distribution function ratio d/u is derived from the F 2 ratio and found to be d/u → 1/6. Our extrapolated values for both the $\frac{F^n_2}{F^p_2}$ ratio and the d/u parton distribution function ratio are within uncertainties of perturbative QCD values from quark counting, helicity conservation arguments, and a Dyson-Schwinger equation with a contact interaction model. In addition, it is possible to match the statistical bootstrap value to theoretical predictions by allowing two compatible models to act simultaneously in the nucleon wave function. Finally, one such example is nucleon wave functions composed of a linear combination of a quark-diquark state and a three-valence quark correlated state with coefficients that combine to give the extrapolated F 2 ratio at x B = 1.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Single-particle behavior at N=126: Isomeric decays in neutron-rich {sup 204}Pt

The four proton-hole nucleus {sup 204}Pt was populated in the fragmentation of an E/A=1 GeV {sup 208}Pb beam. The yrast structure of {sup 204}Pt has been observed up to angular momentum I=10({Dirac_h}/2{pi}) by detecting delayed {gamma}-ray transitions originating from metastable states. These long-lived excited states have been identified to have spin-parities of I{sup {pi}}=(10{sup +}), (7{sup -}), and (5{sup -}) and half-lives of T{sub 1/2}=146(14) ns, 55(3){mu}s, and 5.5(7){mu}s, respectively. The structure of the magic N=126 {sup 204}Pt nucleus is discussed and understood in terms of the spherical shell model. The data suggest a revision of the two-body interaction for N=126, Z<82, which determines the evolution of nuclear structure toward the r-process waiting point nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spent Nuclear Fuel Mechanical Loads in the General Package Drop Scenario

The US Department of Energy Spent Fuel and Waste Science and Technology program is performing research to determine the mechanical loading conditions applied to spent nuclear fuel (SNF) during normal conditions of transportation to inform mechanical tests of SNF and close an important knowledge gap related to the practical disposition of SNF in the US. A recent multi-national collaborative test campaign measured SNF assembly impact response to the 30 cm horizontal package drop scenario, which is a common regulatory basis test of SNF package design. Researchers at Pacific Northwest National Laboratory (PNNL) are using the test data to validate explicit finite element models to calculate the mechanical loads and structural response of spent nuclear fuel assemblies in the as-tested 30 cm horizontal package drop scenario. Once the as-tested package drop model is validated, the next step is to apply the model to the general 30 cm drop scenario, which includes all impact angles, all fuel assembly types, and all burnup conditions. PNNL is developing a damage model that will incorporate the results of finite element parametric studies to establish trends in SNF mechanical loading to various input parameters, like impact orientation and burnup. The damage model will have the capability to estimate mechanical loads for any single set of input parameters, but it will first be used to describe the upper bounds of potential SNF loading in the 30 cm drop scenario. This paper describes PNNL’s progress toward developing the general solution to the problem of spent nuclear fuel mechanical loads in the 30 cm package drop scenario and it describes the next steps in closing the knowledge gap.

Klymyshyn, Nicholas A.↗

Validation Data and Model Development for Fuel Assembly Response to Seismic Loads

Vibrations are inherently present in nuclear reactors, especially in cores and steam generators of pressurized water reactors (PWR). They can have significant effects on local heat transfer and wear and tear in the reactor and often set safety margins. The simulation of these multiphysics phenomena from first principles requires the coupling of several codes, which is one the most challenging tasks in modern computer simulation. Here an ambitious multiphysics multidisciplinary validation campaign is conducted. It relied on an integrated team of experimentalists and code developers to acquire benchmark and validation data for fluid-structure interaction codes. Data are focused on PWR fuel bundle behavior during seismic transients.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design and strategy for next-generation silicon carbide composites for nuclear energy

Silicon carbide (SiC) ceramic-based composites continue to be attractive material options for fusion in-vessel components and fission reactor core structures because of their exceptional high-temperature capability and favorable neutronic properties. As performance data accumulates, the limitations of the current generation of nuclear-grade SiC composites are becoming more apparent. These limitations mainly involve strength degradation during high-dose neutron irradiation. In this paper, we discuss several options for improving the performance of the next generation of SiC composites to enhance the radiation resistance, along with new experimental results on neutron irradiation resistance. The main emphasis is on the selection of the fibers and the design and development of alternative interphase layers for advanced composites.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Generalization Equations for Machine Learners Based on Physical and Abstract Laws

The physical and abstract laws derived from the first principles have been recently exploited to customize and sharpen machine learning (ML) methods and also derive their generalization equations. These laws often encapsulate knowledge that complements datasets and ML models. We present a generic framework that uses these laws to provide ML codes that are transferable across multiple areas, including data transport infrastructures and thermal hydraulics analytics of nuclear reactors. By anchoring on datasets from these areas and the statistical generalization theory, we present a rigorous approach to co-develop ML solutions and the generalization equations that characterize them, by exploiting the structure and constraints from the laws. We present illustrative examples using practical problems from existing literature on the performance characterization of data transport infrastructures, and the sensor error and power level estimation in nuclear reactor systems using sensor measurements of primary and secondary coolant systems, respectively.

Rao, Nageswara↗

Mirror nucleon removal reactions in p-shell nuclei

Nucleon removal reactions have been shown to be an effective tool for studying the single particle structure of nuclei. This work continues efforts to experimentally probe and benchmark the reaction and structure models used to calculate the removal reaction cross sections when using microscopic nuclear structure inputs. Here, three different single nucleon removal reactions were performed, from p -shell nuclei with masses A = 7, 9, and 10. The residual nuclei from the reactions were detected in coincidence with γ rays to determine partial cross sections to individual final states. The eikonal direct-reaction model is combined with overlap functions and residual nucleus densities from microscopic, variational Monte Carlo calculations to provide consistent nuclear structure input to the partial cross section calculations. Comparisons of measured and calculated cross sections, including for mirror reactions, are presented. The analysis of the partial cross sections leading to the ground states shows a similar behavior to the one observed from analyses of inclusive cross sections using shell model nuclear structure input: the theoretical description of the removal process is in better agreement with the data when removing weakly bound nucleons, than when removing well-bound ones. The two mirror reaction pairs presented here show consistent results between the respective members of the pairs. The results obtained for the population of the excited states, however, show a systematically different trend that appears connected to the structure part of the calculation. Additional cases are needed to better understand the respective roles of structure and dynamical effects in the deviations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear spin features relevant to ab initio nucleon-nucleus elastic scattering

Effective interactions for elastic nucleon-nucleus scattering from first principles require the use of the same nucleon-nucleon interaction in the structure and reaction calculations, as well as a consistent treatment of the relevant operators at each order. Previous work using these interactions has shown good agreement with available data. Here, we study the physical relevance of one of these operators, which involves the spin of the struck nucleon, and examine the interpretation of this quantity in a nuclear structure context. Using the framework of the spectator expansion and the underlying framework of the no-core shell model, we calculate and examine spin-projected, one-body momentum distributions required for effective nucleon-nucleus interactions in $J=0$ nuclear states. The calculated spin-projected, one-body momentum distributions for $^4$He, $^6$He, and $^8$He display characteristic behavior based on the occupation of protons and neutrons in single particle levels, with more nucleons of one type yielding momentum distributions with larger values. Additionally, we find this quantity is strongly correlated to the magnetic moment of the $2^+$ excited state in the ground state rotational band for each nucleus considered. In conclusion, we find that spin-projected, one-body momentum distributions can probe the spin content of a $J=0$ wave function. This feature may allow future ab initio nucleon-nucleus scattering studies to inform spin properties of the underlying nucleon-nucleon interactions. The observed correlation to the magnetic moment of excited states illustrates a previously unknown connection between reaction observables such as the analyzing power and structure observables like the magnetic moment.

6 ≤ A ≤ 19↗

The Structure of the Bacterial Oxidoreductase Enzyme DsbA in Complex with a Peptide Reveals a Basis for Substrate Specificity in the Catalytic Cycle of DsbA Enzymes

Oxidative protein folding in Gram-negative bacteria results in the formation of disulfide bonds between pairs of cysteine residues. This is a multistep process in which the dithiol-disulfide oxidoreductase enzyme, DsbA, plays a central role. The structure of DsbA comprises an all helical domain of unknown function and a thioredoxin domain, where active site cysteines shuttle between an oxidized, substrate-bound, reduced form and a DsbB-bound form, where DsbB is a membrane protein that reoxidizes DsbA. Most DsbA enzymes interact with a wide variety of reduced substrates and show little specificity. However, a number of DsbA enzymes have now been identified that have narrow substrate repertoires and appear to interact specifically with a smaller number of substrates. The transient nature of the DsbA-substrate complex has hampered our understanding of the factors that govern the interaction of DsbA enzymes with their substrates. Here we report the crystal structure of a complex between Escherichia coli DsbA and a peptide with a sequence derived from a substrate. The binding site identified in the DsbA-peptide complex was distinct from that observed for DsbB in the DsbA-DsbB complex. The structure revealed details of the DsbA-peptide interaction and suggested a mechanism by which DsbA can simultaneously show broad specificity for substrates yet exhibit specificity for DsbB. This mode of binding was supported by solution nuclear magnetic resonance data as well as functional data, which demonstrated that the substrate specificity of DsbA could be modified via changes at the binding interface identified in the structure of the complex.

36 MATERIALS SCIENCE↗

Data Evaluation of Actinide Cross Sections: 240 Am, 241 Am, and 242 Am

Evaluations for neutron-induced reactions on the isotopes 240 Am, 241 Am, and 242 Am were per formed by optimizing reaction-model calculations based on existing experimental data from both direct measurements and surrogate reactions. The evaluated data were based on results obtained from the LLNL reaction codes YAHFC and FRESCO using up-to-date nuclear models; including an improvement upon some previous treatments for inelastic processes. Nuclear reaction codes generated data for all relevant reaction channels, which were then translated into Generalized Nu clear Data Structure and LLNL’s Evaluated Neutron Data Libraries (ENDL). These data libraries were tested for potential errors and applied to verification and validation (V&V) tests suites where applicable for comparisons.

42 ENGINEERING↗