Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Scanning Kelvin Probe Microscopy: A Tool to Investigate Nano-Scale Doping Non-Uniformities in Poly-Si/SiOx Contacts: Preprint

Monocrystalline Si (c-Si) solar cells with passivated contacts based on the ultrathin SiOx and doped polycrystalline Si (poly-Si) layers in a poly-Si/SiOx/c Si structure show high solar cell efficiencies that are ~26%. Excellent surface passivation using these contacts is achieved via the combined effects of chemical passivation of the SiOx/c-Si interface by the SiOx layer and field-effect passivation from the heavily doped poly-Si layer. These contacts give best performance only when annealed to temperatures higher than 850 degrees C. Structural changes in the SiOx layer and dopant diffusion from poly-Si into the underlying c-Si wafer occur during this step which are hard to investigate using conventional characterization techniques. In this work we investigate poly-Si/SiOx contacts with both a 1.5 (tunneling transport) and 2.2 (pinhole transport) nm SiOx layer using atomic force microscopy techniques. Conductive AFM on n+-poly-Si/SiOx/p-Si structures show significant spatial variations for both contact types, likely due to non-uniformities in the poly-Si layer itself. The electrical and structural variations deeper into the contact were revealed by scanning Kelvin probe microscopy after precisely etching away the poly-Si and SiOx layers and few nanometers of c-Si surface. This etching was performed using tetramethylammonium hydroxide and dilute HF solutions. The resulting surface potential maps appear similar for both contacts, and show less than 500 nm size heavily-doped regions. However, further etching of the c-Si surface reveals these heavily-doped regions to be less than 200 nm deep for the 2.2 nm SiOx contact and greater than 200 nm deep for the 1.5 nm SiOx contact.

14 SOLAR ENERGY↗

All roads lead to Rome: Sodiation of different-stacked SnS 2

Structural symmetry variations of two-dimensional materials may significantly affect their reaction process and kinetics with alkali ions. Here, SnS 2 with different structural symmetry is used as the target to be comparatively investigated the phase transition pathway and ionic diffusion upon (de)sodiation in sodium-ion batteries using in situ transmission electron microscopy and ex situ x-ray photoelectron spectroscopy in combination with first-principles calculations. Different intermediate phases, AA1 NaSnS 2 for trigonal SnS 2 and AB1 NaSnS 2 for hexagonal SnS 2 , are observed after sodium ions fully occupy all Oh sites. While the coming conversion/alloying reaction processes are relatively similar. The AA1/AB1 NaSnS 2 sequentially transits to SnS, β-Sn and Na 15 Sn 4 phases starting from T d sites of SnS 2 being held. Reversible reactions occur among SnS, Na 15 Sn 4 and Na 2 S m (2

25 ENERGY STORAGE↗

Near-wake dynamics of a vertical-axis turbine

Cross-flow, or vertical-axis, turbines are a promising technology for capturing kinetic energy in wind or flowing water and their inherently unsteady fluid mechanics present unique opportunities for control optimization of individual rotors or arrays. To explore the potential for beneficial interactions between turbines in an array, as well as to characterize important cycle-to-cycle variations, coherent structures in the wake of a single two-bladed cross-flow turbine are examined using planar stereo particle image velocimetry in a water channel experiment. There are three main objectives in the present work. First, the mean wake structure of this high chord-to-radius ratio rotor is described, compared with previous studies, and a simple explanation for observed wake deflection is presented. Second, the unsteady flow is then analysed via the triple decomposition, with the periodic component extracted using a combination of traditional techniques and a novel implementation of the optimized dynamic mode decomposition. The latter method is shown to outperform conditional averaging and Fourier methods, as well as uncover frequencies suggesting a transition to bluff-body shedding in the far wake. Third, vorticity and finite-time Lyapunov exponents are then employed to further analyse the oscillatory wake component. Vortex streets on both sides of the wake are identified, and their formation mechanisms and effects on the mean flow are discussed. Strong axial (vertical) flow is observed in vortical structures shed on the retreating side of the rotor where the blades travel downstream. Time-resolved tracking of these vortices is performed, which demonstrates that vortex trajectories have significant rotation-to-rotation variation within one diameter downstream. This variability suggests it would be challenging to harness or avoid such structures at greater downstream distances.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the variations of optical property and electronic structure in heavily Al-doped ZnO films during double-step growth process

We have investigated the variations of optical property and electronic structure in heavily Al-doped ZnO (AZO) films during the growth process, which were formed by first creating Zn vacancies in O{sub 2}-rich atmosphere and second filling the vacancies with Zn atoms in Zn-vapor atmosphere. After the first step, the high-resistance AZO films have the same optical bandgap with nominally undoped ZnO, indicating that negligible variations in the fundamental bandgap happened to the AZO films although Al atom was incorporated into the ZnO lattice. After the second step, once free electrons were brought into the lattice by Zn-filling, the optical transition energy blueshifts due to the band-filling effect. X-ray absorption fine structure measurements suggest that Zn-filling process decreased the unoccupied states of the conduction band, but not raised the conduction band minimum.

36 MATERIALS SCIENCE↗

Structural and physical properties of layered oxy-arsenides LnRuAsO (Ln=La, Nd, Sm, Gd)

Polycrystalline samples of LaRuAsO, NdRuAsO, SmRuAsO, and GdRuAsO have been synthesized and studied using powder x-ray diffraction, electrical transport, magnetization, and heat capacity measurements. Variations in structural properties across the series reveal a trend toward more ideal tetrahedral coordination around Ru as the size of the rare earth element is reduced. The lattice parameters of these Ru compounds show a more anisotropic response to variation in Ln than their Fe analogs, and significant anisotropy in thermal expansion is also observed. Transport measurements show metallic behavior, and carrier concentrations near 10{sup 21}-10{sup 22} electrons per cm{sup 3} are inferred from simple analysis of Hall effect measurements. Anomalies in resistivity, magnetization, and heat capacity indicate antiferromagnetic ordering of rare earth moments at 5 K for GdRuAsO, 4.5 K for SmRuAsO, and <2K for NdRuAsO. Magnetization measurements on LaRuAsO show no evidence of a magnetic moment on Ru. Observed behaviors are compared to those reported for similar Fe and Ru compounds. - Graphical abstract: Analysis of crystal structure, electrical transport, magnetic susceptibility, and heat capacity of LaRuAsO, NdRuAsO, SmRuAsO, and GdRuAsO. Highlights: Black-Right-Pointing-Pointer Experimental investigation of LaRuAsO, NdRuAsO, SmRuAsO, and GdRuAsO. Black-Right-Pointing-Pointer Anisotropic lattice response to changing Ln radius and temperature. Black-Right-Pointing-Pointer Ru coordination becomes more ideal as Ln radius is reduced. Black-Right-Pointing-Pointer Transport measurements reveal metallic conduction dominated by electrons. Black-Right-Pointing-Pointer Magnetic measurements indicate antiferromagnetic ordering Nd, Sm, and Gd moments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soluble aromatic polyimides for film and coating applications

Linear all-aromatic polyimides have been synthesized and characterized which show much potential as films and coatings for electronic applications. Structure-property relations with regard to methods for obtaining solubility of fully imidized polymers will be discussed. Methods used to obtain solubility include variation of polymer molecular structure, variation of isomerism of the diamine monomer, modification of cure time/temperature and atmosphere. Other properties of soluble polyimides will be presented which include glass transition temperatures, thermooxidative stabilities, UV-visible spectra, and refractive indices.

St.clair, Anne K.↗

Soluble aromatic polyimides for film and coating applications

Linear all-aromatic polyimides have been synthesized and characterized which show much potential as films and coatings for electronic applications. Structure-property relations with regard to methods for obtaining solubility of fully imidized polymers will be discussed. Methods used to obtain solubility include variation of polymer molecular structure, variation of isomerism of the diamine monomer, modification of cure time/temperature and atmosphere. Other properties of soluble polyimides will be presented which include glass transition temperatures, thermooxidative stabilities, UV-visible spectra, and refractive indices.

St.clair, Anne K.↗

Effect of Helical Slow-Wave Circuit Variations on TWT Cold-Test Characteristics

Recent advances in the state of the art of computer modeling offer the possibility for the first time to evaluate the effect that slow-wave structure parameter variations, such as manufacturing tolerances, have on the cold-test characteristics of helical traveling-wave tubes (TWT's). This will enable manufacturers to determine the cost effectiveness of controlling the dimensions of the component parts of the TWT, which is almost impossible to do experimentally without building a large number of tubes and controlling several parameters simultaneously. The computer code MAFIA is used in this analysis to determine the effect on dispersion and on-axis interaction impedance of several helical slow-wave circuit parameter variations, including thickness and relative dielectric constant of the support rods, tape width, and height of the metallized films deposited on the dielectric rods. Previous computer analyses required so many approximations that accurate determinations of the effect of many relevant dimensions on tube performance were practically impossible.

Kory, Carol L.↗

Effect of Helical Slow-Wave Circuit Variations on TWT Cold-Test Characteristics

Recent advances in the state of the art of computer modeling offer the possibility for the first time to evaluate the effect that slow-wave structure parameter variations, such'as manufacturing tolerances, have on the cold-test characteristics of helical traveling-wave tubes (TWT's). This will enable manufacturers to determine the cost effectiveness of controlling the dimensions of the component parts of the TWT, which is almost impossible to do experimentally without building a large number of tubes and controlling several parameters simultaneously. The computer code MAxwell's equations by the Finite Integration Algorithm (MAFIA) is used in this analysis to determine the effect on dispersion and on-axis interaction impedance of several helical slow-wave circuit parameter variations, including thickness and relative dielectric constant of the support rods, tape width, and height of the metallized films deposited on the dielectric rods. Previous computer analyzes required so many approximations that accurate determinations of the effect of many relevant dimensions on tube performance were practically impossible.

Kory, Carol L.↗

Effect of Helical Slow-Wave Circuit Variations on TWT Cold-Test Characteristics

Recent advances in the state of the art of computer modeling offer the possibility for the first time to evaluate the effect that slow-wave structure parameter variations, such as manufacturing tolerances, have on the cold-test characteristics of helical traveling-wave tubes (TWT's). This will enable manufacturers to determine the cost effectiveness of controlling the dimensions of the component parts of the TWT, which is almost impossible to do experimentally without building a large number of tubes and controlling several parameters simultaneously. The computer code MAFIA is used in this analysis to determine the effect on dispersion and on-axis interaction impedance of several helical slow-wave circuit parameter variations, including thickness and relative dielectric constant of the support rods, tape width, and height of the metallized films deposited on the dielectric rods. Previous computer analyzes required so many approximations that accurate determinations of the effect of many relevant dimensions on tube performance were practically impossible.

Kory, Carol L.↗

Topologically derived dislocation theory for twist and stretch moiré superlattices in bilayer graphene

In this work, we develop a continuum dislocation description of twist and stretch moiré superlattices in two-dimensional material bilayers. The continuum formulation is based on the topological constraints introduced by the periodic dislocation network associated with the moiré structure. The approach is based on solving analytically for the structural distortion and displacement fields that satisfy the topological constraints and that minimize the total energy. The total energy is described by both the strain energy of each individual distorted layer and a Peierls-Nabarro-like interfacial contribution arising from stacking disregistry. The dislocation core emerges naturally within the formalism as a result of the competition between the two contributions. The approach presented here captures the structure and energetics of twist and stretch moiré superlattices of dislocations with arbitrary direction and character, without assuming an analytical solution a priori and while accounting naturally for dislocation-dislocation image interactions. In comparisons to atomistic simulations using classical potentials, the maximum structure deviation is 6%, while the maximum line energy deviation is 0.019 eV/Å. Several applications of our model are shown, including predicting the variation of structure with twist angle and describing dislocation line tension and junction energies.

36 MATERIALS SCIENCE↗

Correlation between ultrasonic velocity and density of ceramic turbine blades

A computer-aided ultrasonic velocity measurement system to detect small density variations in structural ceramic materials has been developed. Longitudinal wave ultrasonic velocity and density of ceramic turbine blades and bars were measured and statistically correlated. Density variations of 1 to 2 percent were reliably detected. Burst speed of ceramic blades was inversely proportional to the grain size of the material.

Khandelwal, P. K.↗

Dimensional Evolution Guides Property Control in the A n Cu 4– n TiS 4 Semiconductor Series

Through progressive reduction of the three-dimensional (3D) covalent network of Cu 4 TiS 4 , we isolate seven new members of the A n Cu 4–n TiS 4 family (A = alkali metal; n = 0–4), spanning 3D, 2D, 1D, and 0D structural fragments. The dimensional reduction is rational, as it preserves the edge-sharing connectivity between [CuS 4 ] 7– and [TiS 4 ] 4– tetrahedra across the series. This structural evolution is driven by the stepwise substitution of Cu with alkali metals, guiding the formation of fragments with reduced dimensionality. The effects of “n” and “A” on the crystal structures, stabilities, electronic structures, and optoelectronic properties are profound, demonstrating that the manipulation of alkali metal size and A n Cu 4–n TiS 4 stoichiometry enables predictable variations in structure and properties. For example, the n = 0 and n = 4 end members of the A n Cu 4–n TiS 4 family set the range of achievable band gaps with 2.00 eV for Cu 4 TiS 4 , 2.60 eV for Na 4 TiS 4 , and intermediate values for the n = 1–3 members. Notably, CsCu 3 TiS 4 exhibits exceptional air stability and congruent melting, with density functional theory (DFT) calculating moderate hole and electron effective masses in specific crystallographic directions (mh = 1.24m 0 , me = 0.87m 0 ). Additionally, A 3 CuTiS 4 (A = Na, K, Rb) displays direct band gap behavior and long photoluminescence lifetimes of 2.3–8.6 μs, and K 3 CuTiS 4 has a PLQY of 5.19%. These findings underscore the potential of the A n Cu 4–n TiS 4 family for applications in optoelectronics and demonstrate widely applicable design concepts that unveil rational stoichiometries within a given composition space to generate a series of crystal structures related through an evolving covalent dimensionality that corresponds to a predictable electronic structure and property progression.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Balancing Participation and Speed: A Polycentric Governance Lens on Renewable‐Energy Siting

Siting and permitting for renewable projects vary in process and authority structures. Such variation can create coordination challenges and inconsistent public participation processes. We develop a Governance Trade-Off Matrix to classify permitting processes by (1) authority structure (polycentric vs. monocentric) and (2) procedural extensiveness (minimal vs. extensive). The matrix shows when jurisdictional dispersion enables timely implementation and when it creates coordination breakdowns. We propose testable hypotheses on how governance design affects project timelines, conflict escalation, and local acceptance. Here, the framework highlights design levers, like single lead agencies, structured public involvement, and statutory shot clocks, to reconcile meaningful local input with urgent climate imperatives.

14 SOLAR ENERGY↗

Cosmic-ray variations and the interplanetary sector structures.

Fifteen passages of interplanetary sector structures that occurred between December 1967 and June 1968 are examined. A spherical harmonic analysis of cosmic ray intensity is performed to obtain cosmic ray intensity variations as a function of asymptotic latitude, longitude, and universal time. A clear north-south asymmetry of cosmic ray intensity, which depends on the sign of the interplanetary sector magnetic fields, is revealed.

Yoshida, S.↗

Hyperspectral Remote Sensing of Foliar Nitrogen Content

A strong positive correlation between vegetation canopy bidirectional reflectance factor (BRF) in the near infrared (NIR) spectral region and foliar mass-based nitrogen concentration (%N) has been reported in some temperate and boreal forests. This relationship, if true, would indicate an additional role for nitrogen in the climate system via its influence on surface albedo and may offer a simple approach for monitoring foliar nitrogen using satellite data. We report, however, that the previously reported correlation is an artifact - it is a consequence of variations in canopy structure, rather than of %N. The data underlying this relationship were collected at sites with varying proportions of foliar nitrogen-poor needleleaf and nitrogen-rich broadleaf species, whose canopy structure differs considerably. When the BRF data are corrected for canopy-structure effects, the residual reflectance variations are negatively related to %N at all wavelengths in the interval 423-855 nm. This suggests that the observed positive correlation between BRF and %N conveys no information about %N. We find that to infer leaf biochemical constituents, e.g., N content, from remotely sensed data, BRF spectra in the interval 710-790 nm provide critical information for correction of structural influences. Our analysis also suggests that surface characteristics of leaves impact remote sensing of its internal constituents. This further decreases the ability to remotely sense canopy foliar nitrogen. Finally, the analysis presented here is generic to the problem of remote sensing of leaf-tissue constituents and is therefore not a specific critique of articles espousing remote sensing of foliar %N.

Knyazikhin, Yuri↗